For everyone asking how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
Once again I thank you for sharing your knowledge with the people of this planet called earth. Your video was very easy to follow. Even for us seniors that are not up with all the new technology. What a blessing. Be well, stay safe, in your travels. Sam Q. 🌎
The easiest way to get into this mode is pretend you’re trying to activate E. Hondas hands or Blankas electricity. Thats the speed that got me into the modes 😀
I can't seem to get this to work. My S2+ will not go into programming mode. I've fully pressed and half pressed as fast as I can and it will not vibrate or go to a flashing output.
I actually don't use these flashlights anymore, so I can't really be of much help. I did have an M2B that had trouble if I cycled too fast. All I can suggest is trying it not quite so fast? Sorry, I hope you can get it figured out somehow.
Good Day Sir. Mine got stuck on 10 or 20% brightness after I double tapped afte the first buzz. The quick taps to change the groups doesn't work anymore. Is there a way to do a reset or do I need to buy a new driver? Thanks in advance.
You most likely have to buy a new driver,sounds like the memory function of the mode changer burned out.They warn about using it repeatedly or leaving it in the open change mode to long cause it will burn it out.
@badger0888. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
@lasempre-gs4fg. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
This is THE best description I have found and followed this to re programme my convoy , nice one 👍
Thanks! Straight to the point and clear.
By far the most easy to follow video for configuration. Thank you!
This is a lot easier to understand than reading the text instructions.
Thank you!
For everyone asking how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
Once again I thank you for sharing your knowledge with the people of this planet called earth. Your video was very easy to follow. Even for us seniors that are not up with all the new technology. What a blessing. Be well, stay safe, in your travels. Sam Q. 🌎
Best explanation I have seen on the mode selection, so clear, thank you.
thank you! set my Convoy S21b to tactical mode 11/memory off so it always turns on to 100%/turbo then can get to strobe in 2 clicks. 👍🏽
Thank you! The text instructions I found weren't very clear, but thanks to this video, I was able to set up my M21B exactly how I wanted it.
sent here from reddit but your directions were spot on for my convoy s2+! thank you!
great video,
Now I finally know how to set the modes👍😊
thank you so much! This is the only video on youtube that is helpful. I couldn't understand the instructions either
Really appreciate you making this informative video. Clear and straight to the point! Now i finally understand that diagram haha
Very helpful, thank you! 1 definitely seems easy to miss. I pressed immediately on accident and got the second group, which I wanted anyways.
The easiest way to get into this mode is pretend you’re trying to activate E. Hondas hands or Blankas electricity. Thats the speed that got me into the modes 😀
Thanks a lot!
This really helped me with my S21A
Thank you this was very helpful!
Great info! Great video!
Thank you for your knowledge sharing. 👏
Thankyou. The written instructions are not very helpful. Your video is so clear and easy to understand.
Thanks for the video
Many thanx for this video..
Thanks, it worked!
Thanks bro !!!!
Thank You!!!
Thanks!
cheers fella
I can't seem to get this to work. My S2+ will not go into programming mode. I've fully pressed and half pressed as fast as I can and it will not vibrate or go to a flashing output.
I actually don't use these flashlights anymore, so I can't really be of much help. I did have an M2B that had trouble if I cycled too fast. All I can suggest is trying it not quite so fast? Sorry, I hope you can get it figured out somehow.
Good Day Sir. Mine got stuck on 10 or 20% brightness after I double tapped afte the first buzz. The quick taps to change the groups doesn't work anymore. Is there a way to do a reset or do I need to buy a new driver? Thanks in advance.
I'm sorry I can't help with that, I'm really not sure. You may find some answers on The Budget Light Forum? Good luck
You most likely have to buy a new driver,sounds like the memory function of the mode changer burned out.They warn about using it repeatedly or leaving it in the open change mode to long cause it will burn it out.
How do I know if I have this Firmware version? My S2+ is around 2019?
Sorry I can't help you. I'm not sure how to tell. Maybe message and ask Simon at Convoys Ali Express store? Good luck
@badger0888. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
How for s21e bro??
I'm sorry, I'm really not sure about that light.
@lasempre-gs4fg. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.