Thanks Matt! I was able to use your video as a guide to replace the screen on my IC-7300. I got the dreaded horizontal lines about 2 months after the warranty expired. 73 de AC2KV.
Greatest tutorial video I've ever seen on RUclips. I wish I had more thumbs to give you up. My IC-7300 is still ok, but I might have to replace the screen sooner or later. Thanks again for your SUPER informative video. 73
Nice video. I was able to use it to see if replacement of the multi-knob encoder seems doable (it does). By the way, I appreciate your audio commentary which is missing in some instructional videos. Vocalizing what you are seeing, thinking and doing adds a lot in my opinion, especially when working with delicate (and expensive) gear.
is your knob skipping all over? i also watched this video to see if it was doable, as icom charges $125/hr + parts + shipping for out of warranty repairs, i didn't think nearly $200 was worth it for a knob.
The version of 9700 service manual I saw online lists part number 5030004051. The 7300 service manual listed 5030004050, and Icom parts dept advised it changed to 5030004052. My guess is that they all three are form/fit/function equivalent and just revisions. Makes sense they would be the same. Check with whoever you buy from to be sure...
Hard to see in the video, but there are metal tabs sticking up to help align it on the top and sides. Basically just push it toward the top as you are placing it in the metal frame.
I don''t think you will have the same problem in the 705 as it is only a 10w radio therefore the amount of heat generated is a lot less than the chassis of the 7300 has to deal with. Having seen this video i am nearly convinced that the screens give this trouble because its simply stuck onto the metal frame. The fan on the 7300 comes on with every transmission unlike other radios which makes me feel that there is so much heat that that's why they have set the fan to do this ? Maybe i am barking up the wrong tree...
Helpful. Thanks for posting! Catch you down the log. 73, W9ARO
Thanks Matt! I was able to use your video as a guide to replace the screen on my IC-7300. I got the dreaded horizontal lines about 2 months after the warranty expired. 73 de AC2KV.
Je viens de perdre l afficheur de mon icom 7300 pourriez vous me donner l adresse ou je peux commander un nouveau afficheur 73 de Abdel
Informative, useful video. Thank you! Expect more hits as more people replace their screens!
Greatest tutorial video I've ever seen on RUclips. I wish I had more thumbs to give you up. My IC-7300 is still ok, but I might have to replace the screen sooner or later. Thanks again for your SUPER informative video. 73
Thank you for the information
MUY MUY BUENO, very very Good Video Thank you for the information
Nice video. I was able to use it to see if replacement of the multi-knob encoder seems doable (it does). By the way, I appreciate your audio commentary which is missing in some instructional videos. Vocalizing what you are seeing, thinking and doing adds a lot in my opinion, especially when working with delicate (and expensive) gear.
is your knob skipping all over? i also watched this video to see if it was doable, as icom charges $125/hr + parts + shipping for out of warranty repairs, i didn't think nearly $200 was worth it for a knob.
Gracias por el vídeo! Icom sigue fallando en las pantallas 😬 Espero que el mio no se estropee, si no va directamente a la BASURA!!
Nice clear tutorial thankyou.
Had to replace mine due to the touch not working anymore.
dear Matt, a my friend make a mistake in the Firmware Update
and Icom IC-7300 does not open, what should I do about it.please help and
thanks.
Wow thanks for the video! I have the same problem but it on my ICOM 9700. do you think they have the same part number? thanks in advance
The version of 9700 service manual I saw online lists part number 5030004051. The 7300 service manual listed 5030004050, and Icom parts dept advised it changed to 5030004052. My guess is that they all three are form/fit/function equivalent and just revisions. Makes sense they would be the same. Check with whoever you buy from to be sure...
One of the common problems with the IC-7300.
well done!
Sir..can u help me where to get the screen. My touch screen not working.
Nice video, but I find it a bit disconcerting that there are so many views.
i watched it to see how to replace the multi knob, as they're in the same general place
How did your know you got it on exactly straight when its tape in place?
Hard to see in the video, but there are metal tabs sticking up to help align it on the top and sides. Basically just push it toward the top as you are placing it in the metal frame.
@@mattschrader7454 oh I see..thanks 👍🏻
I think this is the same screen as in the IC 705. Thats a worry.
I don''t think you will have the same problem in the 705 as it is only a 10w radio therefore the amount of heat generated is a lot less than the chassis of the 7300 has to deal with. Having seen this video i am nearly convinced that the screens give this trouble because its simply stuck onto the metal frame. The fan on the 7300 comes on with every transmission unlike other radios which makes me feel that there is so much heat that that's why they have set the fan to do this ? Maybe i am barking up the wrong tree...