Not bad. That looks like steel from a chain from a ship, which is good quality steel. Now you just need to spend a few hours finishing it up, polishing it, heat treating it, coating it with chrome, and selling it. You'll have done a good day's work, and you'll be making $5 to $10 for the day . . . or whatever a good wrench sells for in your area. Good luck! I hope you're able to sell it for a full day's wages. :) Just in case you're wondering, I just bought a set of 15 Craftsman combination wrenches for $40 at Lowe's. They were mostly smaller than this one though. A couple were bigger (as big as 22mm). I'm sure my Craftsman wrenches were made in a big factory in China, by workers using huge machines and furnaces bigger than a house. They probably make thousands of wrenches every day.
Интересно, а сколько в общей сумме часов ушло на эту работу? Это будет для продажи и окупятся все расходы как газ, электричество и заработная плата работнику?
It is not understood why a bent iron rod is cut and then it is being hammered to make it straight and flat ? Instead a square iron rod could be taken to make the tool more easily. Thank you for sharing.
As a mechanic I say, this key is trash, its place is in the scrap metal yard. Justification. The horns on the key should be absolutely even and parallel, this key does not have that. And the key will not work, it will slip.
That symbol existed in many cultures long before Hitler. A group of people do not need to give up their culture and history just because someone evil used their symbol once.
बहुत बढीया हाथ की कारिगरी हे। पर भाई यह 20-30 साल पहले काम आती। आज 200 से 250₹ किलो मे यह आराम से मिल जाते है। आप की महनत नही भी जोड़े तो भी कोयला, ग्राईंडर वील के खर्च मे भी महगा पड़ेगा। बाकी आप के हाथ मे बहुत सफाई है।
It does look like a lot of work, but it looked like it only took about an hour or so. If so, then that's a pretty good deal. Most wrenches cost a lot more than $2, and people in India get about $2 per hour (some far less - like $2 per day). I'm sure that wrench will work well for years to come, and be used to do lots of work. Simple tools like that help make the World a better place. :)
Not bad. That looks like steel from a chain from a ship, which is good quality steel. Now you just need to spend a few hours finishing it up, polishing it, heat treating it, coating it with chrome, and selling it. You'll have done a good day's work, and you'll be making $5 to $10 for the day . . . or whatever a good wrench sells for in your area. Good luck! I hope you're able to sell it for a full day's wages. :) Just in case you're wondering, I just bought a set of 15 Craftsman combination wrenches for $40 at Lowe's. They were mostly smaller than this one though. A couple were bigger (as big as 22mm). I'm sure my Craftsman wrenches were made in a big factory in China, by workers using huge machines and furnaces bigger than a house. They probably make thousands of wrenches every day.
How many views did you get for buying your wrenches from Lowe's? 🤔
به خاطر اس اس لایک ss💪
Love from pakistan
Top❤
Very strong , very stable , top brain 👍
Интересно, а сколько в общей сумме часов ушло на эту работу? Это будет для продажи и окупятся все расходы как газ, электричество и заработная плата работнику?
Well done master.👍
👍
Isn't it much easier to buy a wrench?
Good job 😊
👍👍🙂🙂
Why people use a cutoff wheel throwing sparks back themselves is beyond me. With that aside, nice job on the wrench. I’m impressed.
Altına yumuşak bir demir plaka koyarsan hem örs bozulmaz hem keski.Zenatkarlar bunu yapar.
It is not understood why a bent iron rod is cut and then it is being hammered to make it straight and flat ? Instead a square iron rod could be taken to make the tool more easily.
Thank you for sharing.
Привет от художника ремесленника выжиганиста подекаративна прикладного искусства как выжигание
Esse cara é show 👏👏👏
❤❤❤❤❤
Waw top
As a mechanic I say, this key is trash, its place is in the scrap metal yard. Justification. The horns on the key should be absolutely even and parallel, this key does not have that. And the key will not work, it will slip.
It's ok brother you are right, I am wrong.
Naturally talented, greetings, teacher, thank you
Eq
I wonder what size it ends up being bet some random in between size that doesn’t actually exist
Visto que é um excelente trabalho mais não perceberam o símbolo no verso da chave. Isso mostra que eles continuam atrasados.
That symbol existed in many cultures long before Hitler. A group of people do not need to give up their culture and history just because someone evil used their symbol once.
Mas, pode ser a suástica! Prove o contrário!
Good"
Good
I never seen you harden the steel bro
It looked like it was a piece of a spring so it probably is a pretty strong steel, but I still thought he would have treated it at the end
soft steel!!!! hardening???
👍🙏🙏🙏
hermosa llave
बहुत बढीया हाथ की कारिगरी हे। पर भाई यह 20-30 साल पहले काम आती। आज 200 से 250₹ किलो मे यह आराम से मिल जाते है। आप की महनत नही भी जोड़े तो भी कोयला, ग्राईंडर वील के खर्च मे भी महगा पड़ेगा। बाकी आप के हाथ मे बहुत सफाई है।
I wonder how a 'real' blacksmith would make one of these?
Why a swastika as a brand?
Incredibly talented but too much work for a wrench.
👍💖🌹💛💛💯💯
It does look like a lot of work, but it looked like it only took about an hour or so. If so, then that's a pretty good deal. Most wrenches cost a lot more than $2, and people in India get about $2 per hour (some far less - like $2 per day). I'm sure that wrench will work well for years to come, and be used to do lots of work. Simple tools like that help make the World a better place. :)
После пяти минут догадался что гаечный ключ.видно у человека времени много заниматься ерундой.
This was honestly painful to watch. Do you not own a drill?
Drill a hole in your ends, then cut to meet the holes you drilled
Delay nekhui
Неправильный ключ
He gets 30 cents a piece for making them
Взял отличную стальную какашку испортил...
Nazi symbol !?!?
Not good
😂😂😂😂😂писец, если суммировать все затраты, и его ,, труд", то можно купить ТРИ ключа. Идиотизм бля.
Maybe it's a hobby for him.
Этим надо заниматься когда совсем делать нечего. Сам сытый и семья а достатке