thank you for this video; although I followed all the steps, when I try to simulate with vijeo designer, there is an error : com port open failed everytime, am I missing something ?
Hi Siaci Maissa! I will need to check your programs (HMI and PLC) otherwise is complicated. Can you upload those project in the next box folder? schneider-electric.app.box.com/f/c28473281e2c489093fe72cdb037243c
Thank you for this excellent tutorial! I'm working with HMISTU and M221 connected over ethernet. As far as I can tell I have the settings set correctly but I get an error on the HMI that the PLC returned with error code (01H). I don't know what that means. Also should I be using crossover cable to connect the HMI and M221?
Hi Mistry! standard cable should work. For more information about the error code you can check the next FAQ: www.se.com/ww/en/faqs/FA386843/ Try to remove the cable to see if you get the same message, if yes then the cable is the problem. Please check the ip address and subnet of the device using PING from cmd probably that is the problem.
Hi Sajek! As far as I know we do not that function but you can make something like this to control one output using one input based on the status of the output: schneider-electric.box.com/s/u1cjwfc6wurk3hpynm0foifjzcg6homi
Hi @@LeTomasAHUMADA Thanks for the answer. I just created a combination of NO / NC contacts. Works with what I am happy. But I will check the link you provided. Maybe your option is simpler. I'm just starting to learn M221. Your videos are very helpful. I have to start watching from the beginning. Regards, keep on going!
Thanks for this helpful tutorial , can you upload the fils program in lesson 9.7 part 2 , please
Hi Hichem! You can try it now with the original link. The option to download files was disabled :)
@@LeTomasAHUMADA Done , I'm really grateful Mr AHUMADA
thank you for this video;
although I followed all the steps, when I try to simulate with vijeo designer, there is an error : com port open failed everytime, am I missing something ?
Hi Siaci Maissa! I will need to check your programs (HMI and PLC) otherwise is complicated. Can you upload those project in the next box folder? schneider-electric.app.box.com/f/c28473281e2c489093fe72cdb037243c
How to communicate real value from plc to hmi .should I use %mf in vijeo also
Hi there! If you are using esme basic then you can import the variables as it is shown in the video to avoid thinking about the addresses.
Thank you for this excellent tutorial! I'm working with HMISTU and M221 connected over ethernet. As far as I can tell I have the settings set correctly but I get an error on the HMI that the PLC returned with error code (01H). I don't know what that means. Also should I be using crossover cable to connect the HMI and M221?
Hi Mistry! standard cable should work. For more information about the error code you can check the next FAQ: www.se.com/ww/en/faqs/FA386843/
Try to remove the cable to see if you get the same message, if yes then the cable is the problem.
Please check the ip address and subnet of the device using PING from cmd probably that is the problem.
@@LeTomasAHUMADA thank you for the reply. I'm able to ping both devices. I get yellow triangles on any elements I have on the screen, like buttons etc
@@5nov1988 can you upload both projects in the next link? schneider-electric.app.box.com/f/c28473281e2c489093fe72cdb037243c
@@LeTomasAHUMADA I will do that as soon as I get my virtual machine up and running.
@@LeTomasAHUMADA Done. I think I uploaded the correct vijeo designer files.
Is Flip Flop available? Controlled by one input. To change pump operation. Thank you. Regards
Hi Sajek! As far as I know we do not that function but you can make something like this to control one output using one input based on the status of the output:
schneider-electric.box.com/s/u1cjwfc6wurk3hpynm0foifjzcg6homi
Hi @@LeTomasAHUMADA Thanks for the answer. I just created a combination of NO / NC contacts. Works with what I am happy. But I will check the link you provided. Maybe your option is simpler. I'm just starting to learn M221. Your videos are very helpful. I have to start watching from the beginning. Regards, keep on going!
I checked 😉 the function is definitely simpler 👌. I need to do my homework 😉