Mine grey wires are not connected and in dual engine mode the scooter does not goes over 30kmH and this is rated to 50kmt. the dual speedcontroller is 48v 21a and engine is 1000w each, any ideas? i looked at a 50kmh version of the scooter and it has the same controllers and the grey wires are cut on this one as well. could the limit be in the display? it is a langfeite l8s type
Im planning on installing a wired 12v headlight on my thunder can you tell me what wire would be best to install it on and if you think I'll need a voltage reducer or if they're are wires that are already 12v. Thanks for the informative video!
Thank you very much for this Video! i have done the same but what i have to SET in my Scooter Settings(Menu) my Scooter has Value P7- 100////// P8- 0....... i think P8 is my P7.. but should i set it to 65 or 100 or 125 maybe? sorry for my bad english i hope you will understand me.
How do you know wich one is the speed limiting how did u found out? i have a scooter where there is not much info on internet, still it cost around 500$
Freopa The MT5e‘ s have two Sensor-Cables ... and the Dualtron has two cables for the braking-light / motor-off signal, too. Simply cut the original cable and connect (solder) them with the cables from the Magura Sensor Cables. In my case it was a blue to blue cable and a black to red cable to solder for rear & front brake
I just purchased a Dualtron 3, is it the same on that. Can u PLEASE do a video on that. Thanks
Very good informatic video!
How would you go about changing a LH-100 throttle display to a MiniMotors EY3 throttle display or is it even possible? Thanks
Mine grey wires are not connected and in dual engine mode the scooter does not goes over 30kmH and this is rated to 50kmt. the dual speedcontroller is 48v 21a and engine is 1000w each, any ideas? i looked at a 50kmh version of the scooter and it has the same controllers and the grey wires are cut on this one as well. could the limit be in the display? it is a langfeite l8s type
Big thx 🙏. I suppose the same procedure for dualtron mini 4 pro ?
Im planning on installing a wired 12v headlight on my thunder can you tell me what wire would be best to install it on and if you think I'll need a voltage reducer or if they're are wires that are already 12v. Thanks for the informative video!
Thank you very much for this Video! i have done the same but what i have to SET in my Scooter Settings(Menu) my Scooter has Value P7- 100////// P8- 0....... i think P8 is my P7.. but should i set it to 65 or 100 or 125 maybe?
sorry for my bad english i hope you will understand me.
How do you know wich one is the speed limiting how did u found out? i have a scooter where there is not much info on internet, still it cost around 500$
Hi i have the kuggo m4 do you know if this is possible for this scooter i don't think I have a grey wire tho
Grear information! Big THANKS!!!
are there 2 speed limiter grey cables to disconnect for a dual motor set up?
Roget Faust No. Not for Dualtron Models. They have two Motor Connectors, but still one Controller and Limitation-Cable.
Any idea what colour the speed limiter wire is on a gio e scooter ??
I have a G force scooter .. the throttle always doesn't work .. what should I do?
Is there any Hall sensor to the motor?
Es posible modificar el freno electrico de un dualtron ? Para tenerlos disponible cuando requiera usarlo en una emergencia ?
Thanks for the video, I have the MT5e disc brakes please can you tell me how to connect, what is each colour cable for
Freopa The MT5e‘ s have two Sensor-Cables ... and the Dualtron has two cables for the braking-light / motor-off signal, too. Simply cut the original cable and connect (solder) them with the cables from the Magura Sensor Cables.
In my case it was a blue to blue cable and a black to red cable to solder for rear & front brake
Simple explanation thank u
Informative bro.. 👍👍
Could you do something like this for the Speedway Scooters.
They are also Minimotors Models, so I assume, yes. But: never had a speedway open - so it is an assumption.
2:17 OH NOH! plug it in lol xD it will make your scooter ride longer distance.its awesome
Nooo it makes it go faster
@@E-supermoto yes and shorter distance. 35km in 80kph or 135km in 25kph and not keep trigger full allways down it rolls even up hill
How do I make citycoco scooter faster
disconnect the speed limit wire or change meter and controller
I have 3 steps I want to take my scooter 2 away. how???
So the reason this cable came into existance is politics, nice.
No such type of ware are there.