Neutrik speakON XX Assemblierung

Assemblierung des neuen speakON XX

[@ashtree2372]

Nota bene : à voir cette vidéo on pourrait croire qu'Il faut environ 1000 € d'outillage pour câbler ce connecteur ! 🙂
En fait Neutrik devraient faire savoir au grand public qu'on a juste besoin d'un tournevis Torx T8 et d'une pince coupante, tout le monde n'est pas millionnaire !
Nota bene: watching this video, you'd think you'd need about $1120 worth of tools to wire this connector! 🙂
Neutrik should let the general public know that all you need is a Torx T8 screwdriver and a pair of wire cutters - not everyone is a millionaire! 🙂

[@theblackprophet1]

Well done Neutrik you have successfully produced a really good component that will loose you some customers because you feel you do not owe your customers anything. I for one will not be buying these. There are times on the road you may need to rework a cable for what ever reason and I do not want anything which will take time to disassemble due to a locking system without thought. I rather buy third party. RIDICULOUS

[@hibbasc1]

100%.

[@focadacian4120]

Lockable chuck and T8 torx will lose you a lot of customers.Imagine a wrong polarity connection and not beeing able to open the connector and fix that.These are terrible “improvements” for the new design.

[@ashtree2372]

I totally agree with you. Complètement d'accord avec vous

[@ianrever3955]

Can I get a list of all the tools used in this video?

[@poguzija74]

I believe the torque screwdriver is Wiha TorqueVario-S series 2852. This series has several models with different specifications, so pay attention if you decide to purchase. I still have not solved the question of the torque wrench.

[@bobby-brown]

the tools are listed at 0:05:
- Cable cutter is WIHA profesional electric series, not sure about the model.
- Wire stripper is KNIPEX 12 62 180
- Cable stripper is KNIPEX 16 30 135 SB (RS Pro 262-0151, Wetlink BR-100429 and Jonard Tools CST-1900 are pretty much the same tool)
- Torque screwdriver is WIHA 26462 with WIHA 27526
- Torque wrench is HAZET 3107-3CT

[@seanschwartz4875]

Get you cash ready, because my goodness the tools aint cheap! There are definitely cheaper, just as good alternatives.

[@EricDSalisbury]

Can these be hand tightened like the FX or is the torque wrench essential?

[@ashtree2372]

No, rest assured, you can easily do the tightening by hand. The only thing that can be annoying with this connector model is that, once assembled and the ring tightened, small internal non-return notches make disassembly very difficult.

[@frankjameseagles9670]

how to you remove the locking part if you're done the wiring wrong? it's locked!!!

[@ashtree2372]

In fact, it's very difficult, because the non-return notches on the inside of the cable clamp prevent from turn back (unscrewing). You need to use the Neutrik HTLACB and HTLACA tools, which in August 2023 are worth 80 and 70 euros respectively at low prices... It seems that the people at Neutrik don't care much about this or the cost of their products, since they have virtually monopolized the connector market and imposed their standards, with undeniable quality, but which should be accessible to non-professionals, because even for professionals it's still very expensive...
Without using the HTLACB and HTLACA tools (you can see them in the video), it's possible to use a pair of pliers or a suitable wrench, suitably tightened so as not to damage the plastic, and then unscrew with a fair amount of force, holding the whole front part, but it's true that it's still pretty hard to do. Neutrik should have thought that a connector should be removable, but maybe the next version will have this improvement. It's annoying to have to buy new connectors with new standards every time. Money machine and waste... When the Jack connector was invented, there weren't 50,000 versions...

[@tomasnovacek1533]

Bravo.. Now I need another 100€ to open the 6€ connector. Fail!!!

[@namezuruful]

HTLACA＆HTLACBが高額過ぎる、何時からノイトリックはボッタクリ企業になったんだ。

[@yanndj]

hello equipment good my no way to find the right plug to prevent disconnection and there are people to find the problem, I can also make video for demonstration to see the problem my I doubt that someone will help me I am in France thank you anyway

[@EricDSalisbury]

👍🏾

[@hibbasc1]

Terrible new design that requires expensive tools (HTLACB and HTLACA) to dissemble if/when needed. These tools are small and could easily get lost especially on a large job site.