Just over 1800 rounds through my CSX, and I've had no problems or complaints. My only advice would be, if you buy a new gun you should definitely spend the time shooting it to get to know each gun's personality.... As for me, great job Smith & Wesson I find it much better than my shield!
I’ve put around 700 rds through mine including 150 today alone. ZERO problems with the trigger. Just in case y’all missed that, ZERO PROBLEMS WITH THE TRIGGER. It’s very accurate, great feel in my hand. Love that it’s hammer fired, I carry cocked and locked. No issues with the back strap either. Excellent firearm!
I rented an extended range session with this gun against my Carry Shield. I suspected something was up when the rangemaster said if I liked it, he would make a screaming deal on it for me. I really wanted to like it, especially if I could get a deal on the gun. After putting several full mags through the gun, operationally, its fine, the accuracy was good, but that trigger presents a bit of an identity crisis. It should shoot like a hammer-fired single action (1911ish) but shoots like a striker-fired double action. I realize that is not operationally how it works, but to me it is how it feels, and therein lies the problem. In the end I just didn't like it, but that is why there are hundreds of different choices when it comes to guns.
Having went to school for gun repair and servicing about 50 years ago, and still keeping up with the current technology this article is spot on. This particular pistol is average and actually works very well. If you want the reset to feel better and smoother you can fire a thousand rounds through it and the trigger group will wear to a smoother release. If you want instant results take it apart and stone all rough parts and use a honing grease and this will solve your " I want it now." I have worked on four pistols of this type for people that purchase3d it and were concerned because of misinformation. That being said there are many self appointed experts on the internet as well as uninformed, unknowing critics. This particular gun is a good one. The information given in this post is accurate and factual! Please keep up the good work and excellent reviews. My hat is off to you.!
Thanks for this. Hogue has confirmed that they'll be making a grip mold for this gun as well, so that'll fix any grip issues anyone had. The false reset also goes away after some breaking in, reportedly.
@@CutandCleanTV It really should have. I really wanted to buy it but I bought the p365xl because I wanted a red dot and night sights from the factory. May I’ll pick up one after the performance center gets ahold of it.
Traction Grips has a set of grips for the CSX. It wraps around the front strap, covers the bare spots on the grip. Cost less than $10 and is applied in about 10 minutes.
I've shot the rental model at the range twice and haven't had any issues with it. I haven't noticed any issues with the trigger either. So far, I love it.
Good job of addressing the "so called issues" on the CSX. Every gun has it's own little quirks to figure out and get used to. EVERY gun. It's the owners responsibility to figure them out and learn what to do about them. My neighbor and I finally got to handle a CSX last week and it's an awesome gun. He's going to buy one. He SHOULD have bought the one we looked at because now they're out of stock. But, after watching your videos and handling one, he's ready to purchase. Thanks for everything you guys do.
Yup! I didn’t watch any reviews until after I shot my video. I didn’t notice the reset being as bad as some claimed until I did watch some other reviews. With all the hype, I’ll be excited to do some testing and evaluation of a performance center model that HAS to come out. Call me anytime if you guys want to borrow mine for a day!!
S&W CSX is designed for close body concealment. It is not intended for target shooting or ninnies who want to ride the trigger in an attempt to shave 1/10000ths of a second off their score. In a defensive situation it is doubtful that anyone would have the time to listen or feel for the false reset. There is not a firearm in existence that cannot be defeated by the operator's failure to fully release the trigger. Someone started the discussion which has become an obsession in these reviews. To be fair, it would be great to show a comparison of how any gun can be rendered useless by not allowing the trigger to reset.
All the "RUclips Pros" are playing games shooting at targets. None of targets can injure, shoot or stab them, or kill them. However, I believe shooting off of reset will not be an issue when the pressure of an actual self-defensive response is used.
To be on point , “ There are no serious problems with the smith and Wesson CSX” should have been the first words out of your mouth to launch your video. It’s a great little gun, you say that at the end and every thing is personal preference addressing in my opinion is addressing “ first time buyer syndrome “. People research cars, washing machines, tv and stereo equipment before they make an informed decisions but walk into a gun shop looking like a deer in the headlights, and more importantly “gun dumb” ! They want a gun but have never owned or shot a gun and buy on esthetics , impulse, and name recognition. They don’t understand us gun owners and collectors, they want a gun. Price wise they don’t calculate the gun safe , 200-500 rounds of ammunition, holster, cleaning supplies, or range time. Gun ownership is not an inexpensive hobby and the realization of you will spend more on ammo and needed accessories makes that $400.00 dollar gun with taxes, fees and needed accessories is now a $1000 to $ 1200 purchase. So when they get home they realize I should have bought a gun exactly for my needs and skill level. You can get what you want ( a gun ) and now you find your self in conflict with the unintended consequences of not doing your research before you made the purchase. And that’s no reason to blame the firearm for your being “gun dumb”. And moreover, no reason to soft pedal the truth of false claims of serious gun failures when in fact the truth is simple. Knowledge and experience is the key. The CSX is a great gun but when purchased by those who don’t understand it is built on a 1911 platform which is not recommended for beginners. The 1911 is 100 year old platform that is still the best defense/ offense handgun platform. But it takes range time and lots of practice ammo to understand and master a 1911. The CSX is an excellent version of the 1911 platform in a concealed carry class pistol. End of story
G4 I'm in the same boat as you. I purchased one when they 1st came out, never seen a review until long after. The "trigger issue" is (and I agree with you) a non issue. I never noticed it until I watched reviews. Something I have found, after shooting about 3000 rounds through it, is the false reset is nearly non existent. I think the S&W haters just had to find something to hang thier hat on with the new csx
Everybody who paid for shield plus last year are hating on this gun , Because now they have to pay for CSX, I got one when every body were talking shit about it and now after I did 200 rounds I love it , there are absolutely no issue with this gun
My son bought me a csx for Christmas. I couldn't wait to fire it. Now I'm used to shooting a 1911. My first shot l took...yes it is a little weird with the trigger on resetting. But after putting around 1000 RDS through it, it's not bad. You have to make adjustments from a 1911 to the csx. Or any other hand gun.Over all it is a nice gun.
Missed one by 30 minutes at my LGS last Saturday.Next one that comes in is mine.Watched everybodys vids,i know what to expect,and cant wait to get my mitts on it!Great reviews and content by the way.Love my P365,P238,Ruger Max380 but this is right to my liking of what all three of those have but blended together.
I am a left handed shooter so the ambi slide release, safety, and reversible mag release are the selling points for me. I haven’t seen another micro compact made to be used with both hands out of the box. I’ll do my time with it on the range and learn where the break and reset points are.
Didn’t even realize that the front grip wasn’t just glued to the front of the grip. Mine is totally solid, have had it since my wife convinced me to get it around Valentines day (better gift than flowers) and have taken it to the range most weekends. My wife likes it even better than I do.
To be honest and fair, those were his 1st shots and he did mention that every gun requires a little getting used to. He didn’t call it a crappy trigger. He just doesn’t see any point in a trigger safety on that kind of gun. I tend to agree, but I also agree that with training you can make it work. I would also point out that he shoots a lot of guns in those conditions with gloves on and doesn’t have that problem with any of them. I’m getting a CSX tomorrow, so I’m glad I’m aware of the false reset and I’m certain I can deal with it.
The “false reset” goes away. It’s an excellent pistol and in my experience, what I put in the sights at any distance I hit. Well balanced. I did have an issue early on where it had a defective component in the slide assembly that was corrected under warranty and I have shot over 1000 rounds through it since S&W replaced the slide and it has been trouble free.
Only a Glock shooter would be freaked out about the trigger. They are all dependent on the reset to overcome the ugly trigger on a Glock. I'm at 500 rounds through my CSX and I have not had any issues with my trigger.
I don't shoot off of reset. For me personally, If I need to defend myself, I can't imagine that I will feel that reset whatsoever. While I do want a gun that's trigger resets as forcefully as it should, this isn't a range toy, so I think that it's questionable to make a massive issue out of the reset. Not trying to seem like a jerk, just trying to keep a real world perspective on this.
I've had one since it was released I shoot it pretty darn good. My front strap is solid as of now and as far as the trigger goes I have no issues with it. There might be a false reset but honestly I've never noticed it when at the range. It's a close range carry gun it doesn't have to have a perfect trigger. It's definitely good enough as far as I'm concerned.
Your comment on the Performance Center version is spot on. That may he the ultimate version. Still, I'd like a standard model with an improved trigger and an optic. I love how this gun feels and I'm excited for its final form. What might be even crazier is if they used the same frame and made a DA/SA version...I know. Lunacy.
Just got this gun yesterday. Hadn't watched any videos over it beforehand. I love it. The reset on my trigger works just fine for me. 100 rounds of cheap laquer coated monarch 9mm just fine.
for being pretty much the first single action micro double stack. you would think the trigger should be the main attraction. that's why everyone is hating on it.
Issues? Not with mine! I think it’s great after 300 rounds. No trigger reset problem ( but it is a bit harder than I would like) But this makes it safer for self defense. I also had to adjust front sight. I find it very reliable and comfortable.
I'm a trigger reset snob, and those guys are straight up making sht up and need to stop riding their reset so hard. The Fake reset is OBVIOUSLY not a reset. The only actual problem with the CSX is the garbage 10 round mag that refuses to seat unless the slide is open. (therefore you have to use the 10 round as a backup mag, while the 12 can be used like any other mag)
They made this gun to look like a mini-1911 such as the Mustang, or P938 that uses P365's magazines, kind like best of both worlds. But unlike the other designs it doesn't do a good copy job: instead of 1911 style grip panels it uses M&P-like grip module, so the sides are completely slick when you use the small grip; and instead of tried and true front checkering, they glued a piece of rubber in there like an after thought. It's such an half-assed job that instead of homage it's more like insult to John Browning :)
I ride motorcycles, precise throttle actuation is a must, it's in constant use. My new gun, not so much, brought it for a specific reason, the guy sneaking in my daughter's bedroom! After that, fun toy to look at, with a great story. Sure hope it isn't my Son-in-law getting off early. ...then it's a bad Story.
So many You tubers have cited issues with the trigger. One with over 7 million followers made a great comment: It might get ya kilt! I would not want to stake my life on it
I have no idea why it became a "thing" to hate on this gun. I picked one up in the range kit for $400 at a local pawn shop and I love it - a micro-sized 1911 that holds 12 rds. Very easy shooting. Trigger issues? Seems exaggerated to me, never experienced any (maybe because I bought it used and it was broken in?) Yeah, would be nice if it had an optics cut and rail, but then it's not that kind of gun. It will fit in your pocket if need be.
Thank you for this video. I'm a new handgun owner and this is my first handgun. I bought it without looking at any reviews. I have not fired it yet and look forward to practicing with it.
I have a brand new one and if put 500 rounds through it and I have no issues with it whatsoever. I guess if you are a gun finesse type person or have to be just absolutely one-hundred-percent perfect it might not be the gun for them
If you take theag out you can actually look up it and see what the false reset is. It's hitting the ledge and just not going all the way and that is what the false reset it.
I've been shooting my G19 for 3 years, I'm used to that trigger. Went in to my local shop and tried the trigger on this and bought it right then. Got home and shot it. Night and day difference, in a good way. I still love my Glock, but this is my baby now. Im having a tough time getting the 12th round in the mag.
trigger reset is an important part of shooting fundamentals for beginners, once skills are refined, you focus more on the beginning of the trigger press. Ultimately, Trigger reset is not what aims the firearm and it is not what sends the round downrange. Some folks are too obsessed on something that ultimately does not matter in a gunfight. My 2 cents worth..
There's a post about the trigger on the Smith & Wesson forums regarding the faux reset. It will more than likely break in, but if you're impatient I figured out a fix for it and put it up there. Just needs some internals polished up so they slide smooth across one another.
thanks sir this is more of what i thought after watching a couple other vidios and they both complained about it thank you for realy showing the whats actually happening sir
I always have to go in and modify triggers to get them how I like them anyway. In this case I might see if I could ditch the trigger safety if it bothered me. I just like the 1911 influences on this gun. I like hammers...I'm weird that way.
Someone needs to open up the pistol and examine the trigger and action movement to see if they can figure out what is causing the "bump" during reset. I would not be surprised to find out that it is a burr or rough spot in the action that can easily be stoned smooth!!!
@@g4outdoors Something must be hanging up but is getting worn down smooth if owners are reporting the click is gone after putting 500+ rounds through the pistol. I would love to see a teardown side by side comparison of a newer pistol and one that has been broken in.
I love my CSX. Crisp 5.5 pound trigger that feels better than the one on my Shield Plus. Lighter and much smaller too. Incredible build quality and value. My only complaints..and they are negligible..are the very light return trigger spring and the lack of factory night sights. And both of those will be fixed shortly..along with the wraparound traction grips I just ordered.
When Hickock tested it, he released the trigger completely and it did not reset at all. The problem was not a false reset. It was NO reset. several times. Maybe that was just the example he was using. Hope so.
Its the firing pin block.Smooth it,smooth the bar contacting it and clip 2 coils off the pin block spring and you will have one click reset with a 5lb consistent pull that will get even better with use.Fixed it the first day i had it.
My CSX "false reset" went away after about 200 rounds. My trigger breaks consistently at 4.5 pounds and that's fine because it has a thumb safety. My only concern was the three dot sights. I painted the front sight with fluorescent green paint and it helped a lot in target acquisition. Comparison with the Sig P365 created a conundrum. Took a while to decide that I was more accurate and enjoyed shooting the CSX more.
Watch Hickok45's second video on his sample. At one point he completely remove his finger from the trigger and even then the trigger doesn't reset. IMO there are two issues in play, a sub optimal design for the trigger group and variations in Manufacturing that make these pistols not worthy of consideration for Defense.
I went deep into the internals of my CSX and polished all parts that rub together to smooth it out without shooting hundreds of rounds. After careful inspection, I determined the so called "false reset" although there, was a result of what I will call the safety bar coming off the firing pin stop plunger (similar to the one found in a Glock). The bar snaps off the plunger and that manifests itself as a reset before the actual reset which happens when the trigger bar goes forward of the sear as the trigger is released. I blocked the firing pin stop plunger in the depressed position which is the operational position it takes when the trigger is pulled rearward. This took the plunger completely out of the operational picture, put the slide back on and tested for the false reset. It was completely gone. The spring under the plunger is quite robust which I think leads to the reset feel as the safety bar that depressed the plunger in the first place slides off of it upon reset. Polishing components did help, but minor altering of the plunger did the most good. The false reset is mostly gone and the firing pin safety feature still does its job by not letting the firing pin go forward unless the trigger is pulled.
This is a model that will probably disappear fairly quickly unless they can solve the trigger problem - and it is a problem. In fact, it can get you killed. Take this CSX, and give it a more traditional 1911 trigger and you'll have one of the absolute best micro 9mm on the market. I bought one, but I'll never carry it unless I can replace the trigger with a 1911 trigger. What the heck is the point anyway. You can't improve on the 1911 trigger. S&W missed the mark on this one.
The Ruger LCP, the Kel Tecs and many other very popular guns have false resets... and I think people were entirely unfair to this gun. I think if more people gave it a chance it could be a good, popular gun. It's a good CCW and in a self defense situation I really don't think the person's going to be short stroking the trigger. I hope they come out with a Performance Center version and/or a Version 2 and that more people give it a chance. I'm not a single action or manual safety kind of person when it comes to Concealed Carry... but I can see why a lot of people are. It's a good enough gun though that I actually considered buying one for my niece when she starts carrying.
I think some of the bigger reviewers have caused a lot of people to miss out on purchasing this great gun. I really enjoy shooting mine, but the more I shoot my buddies hellcat the more I’m starting to like it more. I guess you can’t have too many carry guns lol.
Some folks are saying they cant get more than 9 rds in the 10 round mag. Along with the 10 rd mag, the ones who can get 10 in it are saying the mag swells to the point where it wont fit into the magwell.
Some might be saying that, but that definitely is not a problem with ours. A lot of smack being talked about this gun by people that don’t even own or have shot one. Facts!
Exactly! I've seen the issue on another gun channel and they demonstrated exactly that point The magazine swells when fully loaded making it nigh on impossible to insert into the gun. The fault also was identified: Stripped the magazine and found that during production they did not affix the top of the magazine spring to the follower. Once they reattached abra-cadara no more issue!
If all else fails, that's nothing a toothpick and some glow in the dark paint can't fix. It's what I plan on doing with mine, until Trijicon or someone else comes up with a tritium set for it.
I couldn't get mine to false reset I tried to mine works fine my one main complaint it's the way you have to take out the slide pin for field stripping I can't think of any good reason they did it that way
Easily 60% of shooters probably wont notice that, when dry firing and doing that anyone can notice and i notice on mine, but when shooting mine i never noticed it
Same here I absolutely love this little gun. I prefer it over my glock 26 which is much heavier. This guy complains about everything he's the worst gun expert on RUclips...
I will wait till the bugs are worked out on the S&W CSX, if I really want a concealed carry in a larger capacity I will get the S&W Shield Plus it works with the 1.0 shield items I already own...
As some one who shoots to reset this will be a issue for me but I'll just have to treat this trigger as a double action revolver trigger like on my 629 and i do agree with with front strap its not that big of a deal mine has some play but im not worried
THERE IS NOTHING WRONG WITH THE TRIGGER!!! This is mass hysteria. Maybe I got a second generation as I bought it Aug 22. It’s the smoothest firing weapon I’ve ever shot. There’s not a false reset on my gun and the pull doesn’t feel any different from my Walther PPK/S.
It is fixable. My CSX came with a disastrous reset issue and the worst trigger you can imagine. I disassembled the entire pistol, polished and honed the trigger transfer assembly that engages the sear. Polished all moving and contact surfaces. Removed the hammer and sear. Worked on that gun about 6 hours. Brought the 8.5 lb gritty, burred up trigger down to a glass break 4.5 lbs. The reset issue is gone, and it has a great trigger now. Come on Smith, no one should have to repair a new gun out of the box like this. Start sending in comments to S&W in a nice polite professional way and maybe they will improve it. In the meantime I bought a P365 to keep me really happy.
It seems to me the trigger is catching on the firing pin block when the trigger is released. If you remove the slide and carefully pull the trigger and let the hammer down then push the disconnected down(located on the right side of the pistol). Then the trigger will reset with out the false reset. Seem the part of the trigger that depresses the firing pin block when firing is catching in the firing pin release button when the trigger is released. Rounding off the back edge of the firing pin blocker MAY solve the problem. I don’t know. After about 250 rounds I have no problem with the gun as it is. I’m not a gun smith and this is only my opinion.
What's the big deal with the trigger? If you wanted this as your main edc gun wouldn't you drill and practice with it? I felt like if I had it I'd know subconsciously after two clicks the trigger was successfully reset and in a defensive situation I'd be fine as long as I practiced with it especially if you had practice with double action pistols and etc. But I really think this isn't a serious issue or a deal breaker. I think it's up to personal preference and comfort.
Great video brother...I have one I bought it primarily as a Concealed carry. love the balance for such a lil gun, after break in no issues with this lil gem from S&W
Have the gun it shoots well very accurate false reset went away with break in (rounds fired) but I’ll have to call bullshit on the front grip panel not acceptable I mean would you be ok with a car if every time you drive it the front bumper fell off I mean you could use duct tape and bailing wire to hold it on ….. but would you really be ok with it …. Don’t think all of them do it mine did and from the vids on here I’m not alone
One of the few times S&W produced a bad gun. The trigger is awful, and that reset is a problem. I got rid of mine and I don't believe S&W intends on producing a Performance Center version of this gun.
I am really excited about the possibilities for this pistol. I WANT it to be great. And certainly any trigger CAN be learned. But to me (I'm not a fan of striker fired triggers), the biggest selling point of single action is an awesome trigger. The trigger plus the grip strap weirdness plus several reports of full magazine issues are enough for me to wait and hope S&W comes out with an improved version. But I certainly get your point and the fact that you still like it so much says a lot.
Trigger issue works itself out the more you break it in by firing. I've seen a lot of owners say it goes away with a couple hundred rounds. Lots of youtube reviewers aren't gonna get that many rounds through a new pistol for a review unless they're really about it. If you think about it, time and ammo are more of a concern for a gun reviewer so there's gonna be a lot of people without broken in models because of it.
Thaks for the review that I have found to be much more informative & revealing of the CSX. I agree 100% with your findings. This is a great c/c pistol for me. It is not realy a tactial pistol as a Sig 226 or other tactial pistols that are set up for quick bumps/reset and tactial response. As for a good trustworthy c/c pistol with a 12 round mag , I find it very appealing. The trigger is what it is for genralized c/c pistol. It's all metal which I like, pin fired and very accomdating to a 1911 as I have been used to most of my life. Like another gentleman stated, I have ran about 2k of rounds using different manufactors ammo with only having 2 missfire being both times with crappy reloads.
Just over 1800 rounds through my CSX, and I've had no problems or complaints. My only advice would be, if you buy a new gun you should definitely spend the time shooting it to get to know each gun's personality.... As for me, great job Smith & Wesson I find it much better than my shield!
I like this gun much better than the Shield Plus I replaced it with
agreed. 2k rounds threw mine over the past year. absolutely 0 issues. my trigger is fantastic.
I love mine so far but the trigger could be a tad lighter. I always shoot low with it for some reason compared to my others too.
I’ve put around 700 rds through mine including 150 today alone. ZERO problems with the trigger. Just in case y’all missed that, ZERO PROBLEMS WITH THE TRIGGER. It’s very accurate, great feel in my hand. Love that it’s hammer fired, I carry cocked and locked. No issues with the back strap either. Excellent firearm!
I rented an extended range session with this gun against my Carry Shield. I suspected something was up when the rangemaster said if I liked it, he would make a screaming deal on it for me.
I really wanted to like it, especially if I could get a deal on the gun. After putting several full mags through the gun, operationally, its fine, the accuracy was good, but that trigger presents a bit of an identity crisis. It should shoot like a hammer-fired single action (1911ish) but shoots like a striker-fired double action. I realize that is not operationally how it works, but to me it is how it feels, and therein lies the problem. In the end I just didn't like it, but that is why there are hundreds of different choices when it comes to guns.
Having went to school for gun repair and servicing about 50 years ago, and still keeping up with the current technology this article is spot on. This particular pistol is average and actually works very well. If you want the reset to feel better and smoother you can fire a thousand rounds through it and the trigger group will wear to a smoother release. If you want instant results take it apart and stone all rough parts and use a honing grease and this will solve your " I want it now." I have worked on four pistols of this type for people that purchase3d it and were concerned because of misinformation. That being said there are many self appointed experts on the internet as well as uninformed, unknowing critics. This particular gun is a good one. The information given in this post is accurate and factual! Please keep up the good work and excellent reviews. My hat is off to you.!
Thanks for this. Hogue has confirmed that they'll be making a grip mold for this gun as well, so that'll fix any grip issues anyone had. The false reset also goes away after some breaking in, reportedly.
Can confirm, have put a few hundred rounds through mine and my trigger is night and day different.
Hogue makes the best weapon accessories love a few of their sig and hk knives as well
Just over 500 rounds and the trigger feels great 👍🏻 no problems with false reset.It just needs night sights!
For the price I wish I came with better sights
Same here. I’ve got 700 rounds through mine and about 500 dry fires. No issues, and the false reset is about gone. Great gun!
@@CutandCleanTV It really should have. I really wanted to buy it but I bought the p365xl because I wanted a red dot and night sights from the factory. May I’ll pick up one after the performance center gets ahold of it.
@@CutandCleanTV do you know if they make aftermarket sites for the CSX?
Thanks for the honest review.
Traction Grips has a set of grips for the CSX. It wraps around the front strap, covers the bare spots on the grip. Cost less than $10 and is applied in about 10 minutes.
@James I do not. I can't even find magazines for the CSX yet. I'm also waiting for someone to make night sights for it.
I've shot the rental model at the range twice and haven't had any issues with it. I haven't noticed any issues with the trigger either. So far, I love it.
Good job of addressing the "so called issues" on the CSX. Every gun has it's own little quirks to figure out and get used to. EVERY gun. It's the owners responsibility to figure them out and learn what to do about them. My neighbor and I finally got to handle a CSX last week and it's an awesome gun. He's going to buy one. He SHOULD have bought the one we looked at because now they're out of stock. But, after watching your videos and handling one, he's ready to purchase. Thanks for everything you guys do.
Yup! I didn’t watch any reviews until after I shot my video. I didn’t notice the reset being as bad as some claimed until I did watch some other reviews. With all the hype, I’ll be excited to do some testing and evaluation of a performance center model that HAS to come out. Call me anytime if you guys want to borrow mine for a day!!
Well said👍
My g23 has 0 qwerks.
best youtube intro i've ever seen
The gun community's level of hive-mind is unmatched.
subbed'
S&W CSX is designed for close body concealment. It is not intended for target shooting or ninnies who want to ride the trigger in an attempt to shave 1/10000ths of a second off their score. In a defensive situation it is doubtful that anyone would have the time to listen or feel for the false reset. There is not a firearm in existence that cannot be defeated by the operator's failure to fully release the trigger. Someone started the discussion which has become an obsession in these reviews. To be fair, it would be great to show a comparison of how any gun can be rendered useless by not allowing the trigger to reset.
All the "RUclips Pros" are playing games shooting at targets. None of targets can injure, shoot or stab them, or kill them. However, I believe shooting off of reset will not be an issue when the pressure of an actual self-defensive response is used.
To be on point , “ There are no serious problems with the smith and Wesson CSX” should have been the first words out of your mouth to launch your video. It’s a great little gun, you say that at the end and every thing is personal preference addressing in my opinion is addressing “ first time buyer syndrome “. People research cars, washing machines, tv and stereo equipment before they make an informed decisions but walk into a gun shop looking like a deer in the headlights, and more importantly “gun dumb” ! They want a gun but have never owned or shot a gun and buy on esthetics , impulse, and name recognition. They don’t understand us gun owners and collectors, they want a gun. Price wise they don’t calculate the gun safe , 200-500 rounds of ammunition, holster, cleaning supplies, or range time. Gun ownership is not an inexpensive hobby and the realization of you will spend more on ammo and needed accessories makes that $400.00 dollar gun with taxes, fees and needed accessories is now a $1000 to $ 1200 purchase. So when they get home they realize I should have bought a gun exactly for my needs and skill level. You can get what you want ( a gun ) and now you find your self in conflict with the unintended consequences of not doing your research before you made the purchase. And that’s no reason to blame the firearm for your being “gun dumb”. And moreover, no reason to soft pedal the truth of false claims of serious gun failures when in fact the truth is simple. Knowledge and experience is the key. The CSX is a great gun but when purchased by those who don’t understand it is built on a 1911 platform which is not recommended for beginners. The 1911 is 100 year old platform that is still the best defense/ offense handgun platform. But it takes range time and lots of practice ammo to understand and master a 1911. The CSX is an excellent version of the 1911 platform in a concealed carry class pistol. End of story
I bought one and absolutely love it! Anybody complaining about this gun would complain about money fer nothin and yer chicks fer free.
G4 I'm in the same boat as you.
I purchased one when they 1st came out, never seen a review until long after.
The "trigger issue" is (and I agree with you) a non issue. I never noticed it until I watched reviews.
Something I have found, after shooting about 3000 rounds through it, is the false reset is nearly non existent.
I think the S&W haters just had to find something to hang thier hat on with the new csx
Everybody who paid for shield plus last year are hating on this gun , Because now they have to pay for CSX, I got one when every body were talking shit about it and now after I did 200 rounds I love it , there are absolutely no issue with this gun
I totally agree with you about the trigger, this is not a competition gun.
I would like to thank you gentlemen for your series of videos covering the CSX.
They've been very informative and I have found them incredibly useful.
Thanks Jason!
No issues with my csx put 500 rounds through it
Love it
How did it handle hollowpoints?
The s**** in the slide between the slide and the receiver is totally unacceptable.
I 100% agree, I just seen one and bought it, I don’t feel that false reset and it’s not shit. I’m impressed so far. Thanks for the reviews.
I am really considering getting this.
My son bought me a csx for Christmas. I couldn't wait to fire it.
Now I'm used to shooting a 1911. My first shot l took...yes it is a little weird with the trigger on resetting.
But after putting around 1000 RDS through it, it's not bad. You have to make adjustments from a 1911 to the csx. Or any other hand gun.Over all it is a nice gun.
Missed one by 30 minutes at my LGS last Saturday.Next one that comes in is mine.Watched everybodys vids,i know what to expect,and cant wait to get my mitts on it!Great reviews and content by the way.Love my P365,P238,Ruger Max380 but this is right to my liking of what all three of those have but blended together.
I am a left handed shooter so the ambi slide release, safety, and reversible mag release are the selling points for me. I haven’t seen another micro compact made to be used with both hands out of the box. I’ll do my time with it on the range and learn where the break and reset points are.
Didn’t even realize that the front grip wasn’t just glued to the front of the grip. Mine is totally solid, have had it since my wife convinced me to get it around Valentines day (better gift than flowers) and have taken it to the range most weekends. My wife likes it even better than I do.
I wish these scammers would leave me alone!
To be honest and fair, those were his 1st shots and he did mention that every gun requires a little getting used to. He didn’t call it a crappy trigger. He just doesn’t see any point in a trigger safety on that kind of gun. I tend to agree, but I also agree that with training you can make it work. I would also point out that he shoots a lot of guns in those conditions with gloves on and doesn’t have that problem with any of them. I’m getting a CSX tomorrow, so I’m glad I’m aware of the false reset and I’m certain I can deal with it.
Thanks for review. I am southpaw and this pistol is friendly, easy slide and I like single action autos
The “false reset” goes away. It’s an excellent pistol and in my experience, what I put in the sights at any distance I hit. Well balanced. I did have an issue early on where it had a defective component in the slide assembly that was corrected under warranty and I have shot over 1000 rounds through it since S&W replaced the slide and it has been trouble free.
Only a Glock shooter would be freaked out about the trigger. They are all dependent on the reset to overcome the ugly trigger on a Glock. I'm at 500 rounds through my CSX and I have not had any issues with my trigger.
I don't shoot off of reset. For me personally, If I need to defend myself, I can't imagine that I will feel that reset whatsoever. While I do want a gun that's trigger resets as forcefully as it should, this isn't a range toy, so I think that it's questionable to make a massive issue out of the reset. Not trying to seem like a jerk, just trying to keep a real world perspective on this.
I’m not making a big deal of it, I’m just clarifying what other reviewers are complaining about. I don’t have any complaints with the CSX.
Nailed it..
Exactly right. Riding the reset in a self defense encounter is a recipe to get oneself killed.
I have ZERO issues with mine not 1 problem my opinion and I'm entitled to it. It is a great carry firearm
I've had one since it was released I shoot it pretty darn good. My front strap is solid as of now and as far as the trigger goes I have no issues with it. There might be a false reset but honestly I've never noticed it when at the range. It's a close range carry gun it doesn't have to have a perfect trigger. It's definitely good enough as far as I'm concerned.
Your comment on the Performance Center version is spot on. That may he the ultimate version. Still, I'd like a standard model with an improved trigger and an optic. I love how this gun feels and I'm excited for its final form. What might be even crazier is if they used the same frame and made a DA/SA version...I know. Lunacy.
Just got this gun yesterday. Hadn't watched any videos over it beforehand. I love it. The reset on my trigger works just fine for me. 100 rounds of cheap laquer coated monarch 9mm just fine.
Agreed, fix these issue and I’d buy one … until then will wait for the gen 2
I put a Talon Grip wrap on my grips and am happy with it, improved my grip on it.
for being pretty much the first single action micro double stack. you would think the trigger should be the main attraction. that's why everyone is hating on it.
Issues? Not with mine! I think it’s great after 300 rounds. No trigger reset problem ( but it is a bit harder than I would like)
But this makes it safer for self defense.
I also had to adjust front sight. I find it very reliable and comfortable.
I don’t have any problems with mine at all. Just addressing the gripes of other RUclipsrs.
If you know your gun, there is no problem. Every firearm is unique.
Seems fine. Thanks guys
I'm a trigger reset snob, and those guys are straight up making sht up and need to stop riding their reset so hard.
The Fake reset is OBVIOUSLY not a reset.
The only actual problem with the CSX is the garbage 10 round mag that refuses to seat unless the slide is open.
(therefore you have to use the 10 round as a backup mag, while the 12 can be used like any other mag)
Awesome comment!! That’s what long story short video is all about!! Thanks! 👊🏻
Well over 2000 rounds through mine, not one hickup, Zero issues!
They made this gun to look like a mini-1911 such as the Mustang, or P938 that uses P365's magazines, kind like best of both worlds. But unlike the other designs it doesn't do a good copy job: instead of 1911 style grip panels it uses M&P-like grip module, so the sides are completely slick when you use the small grip; and instead of tried and true front checkering, they glued a piece of rubber in there like an after thought. It's such an half-assed job that instead of homage it's more like insult to John Browning :)
I ride motorcycles, precise throttle actuation is a must, it's in constant use.
My new gun, not so much, brought it for a specific reason, the guy sneaking in my daughter's bedroom!
After that, fun toy to look at, with a great story.
Sure hope it isn't my Son-in-law getting off early.
...then it's a bad Story.
🤣
So many You tubers have cited issues with the trigger. One with over 7 million followers made a great comment: It might get ya kilt! I would not want to stake my life on it
Love this gun. I recommend Talon Grips
I have no idea why it became a "thing" to hate on this gun. I picked one up in the range kit for $400 at a local pawn shop and I love it - a micro-sized 1911 that holds 12 rds. Very easy shooting. Trigger issues? Seems exaggerated to me, never experienced any (maybe because I bought it used and it was broken in?) Yeah, would be nice if it had an optics cut and rail, but then it's not that kind of gun. It will fit in your pocket if need be.
500rds theough mine and not a single issue. Thinking on buying a second. Too many people want easy.
Thank you for this video. I'm a new handgun owner and this is my first handgun. I bought it without looking at any reviews. I have not fired it yet and look forward to practicing with it.
You are going to love it if this is your first!!
I have a brand new one and if put 500 rounds through it and I have no issues with it whatsoever. I guess if you are a gun finesse type person or have to be just absolutely one-hundred-percent perfect it might not be the gun for them
If you take theag out you can actually look up it and see what the false reset is. It's hitting the ledge and just not going all the way and that is what the false reset it.
agree 100 percent with your videos....if people are passing on this cuz of what the big names said they missing out
Yes sir!!
I've been shooting my G19 for 3 years, I'm used to that trigger. Went in to my local shop and tried the trigger on this and bought it right then. Got home and shot it.
Night and day difference, in a good way.
I still love my Glock, but this is my baby now. Im having a tough time getting the 12th round in the mag.
trigger reset is an important part of shooting fundamentals for beginners, once skills are refined, you focus more on the beginning of the trigger press. Ultimately, Trigger reset is not what aims the firearm and it is not what sends the round downrange. Some folks are too obsessed on something that ultimately does not matter in a gunfight. My 2 cents worth..
There's a post about the trigger on the Smith & Wesson forums regarding the faux reset. It will more than likely break in, but if you're impatient I figured out a fix for it and put it up there. Just needs some internals polished up so they slide smooth across one another.
Is this gun pocket carry able? Good review!
thanks sir this is more of what i thought after watching a couple other vidios and they both complained about it thank you for realy showing the whats actually happening sir
My pleasure!! I’m not the biggest or best gun channel on the RUclipss, but I like to give as much information about products as possible.
My CSX is a nice pistol, no complaints.
Bought one when the "fix"happened and have to say, I tried it before I bought it, and I don't have the false safety reset on the trigger.
I always have to go in and modify triggers to get them how I like them anyway.
In this case I might see if I could ditch the trigger safety if it bothered me.
I just like the 1911 influences on this gun. I like hammers...I'm weird that way.
My CSX is amazing. I have no issues.
Most won’t unless they watch the big channel reviews.
Someone needs to open up the pistol and examine the trigger and action movement to see if they can figure out what is causing the "bump" during reset.
I would not be surprised to find out that it is a burr or rough spot in the action that can easily be stoned smooth!!!
I wouldn’t call it a double reset, but that is what it is. The first reset is the trigger safety the second reset is the sear reset.
@@g4outdoors Something must be hanging up but is getting worn down smooth if owners are reporting the click is gone after putting 500+ rounds through the pistol.
I would love to see a teardown side by side comparison of a newer pistol and one that has been broken in.
I love my CSX. Crisp 5.5 pound trigger that feels better than the one on my Shield Plus. Lighter and much smaller too. Incredible build quality and value. My only complaints..and they are negligible..are the very light return trigger spring and the lack of factory night sights. And both of those will be fixed shortly..along with the wraparound traction grips I just ordered.
Others have reported fully loaded 10-round mags sticking. Any issue with yours?
When Hickock tested it, he released the trigger completely and it did not reset at all. The problem was not a false reset. It was NO reset. several times. Maybe that was just the example he was using. Hope so.
Bought one this morning nice size with enough power 9mm
Those complainers are reset shooters. Most people don’t shoot to reset. If you love revolvers, you always let trigger all way out to refire
Its the firing pin block.Smooth it,smooth the bar contacting it and clip 2 coils off the pin block spring and you will have one click reset with a 5lb consistent pull that will get even better with use.Fixed it the first day i had it.
Could you further explain the process on this in detail, what sandpaper grit did you use to smooth it? And by clip you meant cut off?
I appreciate the display! I will wait to see when the performance center will do some tweaks!
Well the p365 sucked at the beginning and they fixed it so hopefully smith and Wesson fixes the csx problems
My CSX "false reset" went away after about 200 rounds. My trigger breaks consistently at 4.5 pounds and that's fine because it has a thumb safety. My only concern was the three dot sights. I painted the front sight with fluorescent green paint and it helped a lot in target acquisition. Comparison with the Sig P365 created a conundrum. Took a while to decide that I was more accurate and enjoyed shooting the CSX more.
Watch Hickok45's second video on his sample. At one point he completely remove his finger from the trigger and even then the trigger doesn't reset. IMO there are two issues in play, a sub optimal design for the trigger group and variations in Manufacturing that make these pistols not worthy of consideration for Defense.
I went deep into the internals of my CSX and polished all parts that rub together to smooth it out without shooting hundreds of rounds.
After careful inspection, I determined the so called "false reset" although there, was a result of what I will call the safety bar coming off the firing pin stop plunger (similar to the one found in a Glock). The bar snaps off the plunger and that manifests itself as a reset before the actual reset which happens when the trigger bar goes forward of the sear as the trigger is released.
I blocked the firing pin stop plunger in the depressed position which is the operational position it takes when the trigger is pulled rearward. This took the plunger completely out of the operational picture, put the slide back on and tested for the false reset. It was completely gone.
The spring under the plunger is quite robust which I think leads to the reset feel as the safety bar that depressed the plunger in the first place slides off of it upon reset.
Polishing components did help, but minor altering of the plunger did the most good. The false reset is mostly gone and the firing pin safety feature still does its job by not letting the firing pin go forward unless the trigger is pulled.
This is a model that will probably disappear fairly quickly unless they can solve the trigger problem - and it is a problem. In fact, it can get you killed.
Take this CSX, and give it a more traditional 1911 trigger and you'll have one of the absolute best micro 9mm on the market. I bought one, but I'll never carry it unless I can replace the trigger with a 1911 trigger. What the heck is the point anyway. You can't improve on the 1911 trigger. S&W missed the mark on this one.
I polished my trigger bar and it’s super clean now.
The Ruger LCP, the Kel Tecs and many other very popular guns have false resets... and I think people were entirely unfair to this gun. I think if more people gave it a chance it could be a good, popular gun. It's a good CCW and in a self defense situation I really don't think the person's going to be short stroking the trigger. I hope they come out with a Performance Center version and/or a Version 2 and that more people give it a chance. I'm not a single action or manual safety kind of person when it comes to Concealed Carry... but I can see why a lot of people are. It's a good enough gun though that I actually considered buying one for my niece when she starts carrying.
Thank you. Love mine and functions fine. You were spot on.
I think some of the bigger reviewers have caused a lot of people to miss out on purchasing this great gun. I really enjoy shooting mine, but the more I shoot my buddies hellcat the more I’m starting to like it more. I guess you can’t have too many carry guns lol.
Great review
Thanks!
Some folks are saying they cant get more than 9 rds in the 10 round mag. Along with the 10 rd mag, the ones who can get 10 in it are saying the mag swells to the point where it wont fit into the magwell.
Some might be saying that, but that definitely is not a problem with ours. A lot of smack being talked about this gun by people that don’t even own or have shot one. Facts!
Exactly!
I've seen the issue on another gun channel and they demonstrated exactly that point
The magazine swells when fully loaded making it nigh on impossible to insert into the gun.
The fault also was identified:
Stripped the magazine and found that during production they did not affix the top of the magazine spring to the follower.
Once they reattached abra-cadara no more issue!
One of the best micro 9mm on the market period 👌 my only gripe is no night sights
Inevitably, they will come out with a performance center model that will be crispy. Hopefully with tritium.
If all else fails, that's nothing a toothpick and some glow in the dark paint can't fix. It's what I plan on doing with mine, until Trijicon or someone else comes up with a tritium set for it.
I couldn't get mine to false reset I tried to mine works fine my one main complaint it's the way you have to take out the slide pin for field stripping I can't think of any good reason they did it that way
Easily 60% of shooters probably wont notice that, when dry firing and doing that anyone can notice and i notice on mine, but when shooting mine i never noticed it
Same here I absolutely love this little gun. I prefer it over my glock 26 which is much heavier. This guy complains about everything he's the worst gun expert on RUclips...
I will wait till the bugs are worked out on the S&W CSX, if I really want a concealed carry in a larger capacity I will get the S&W Shield Plus it works with the 1.0 shield items I already own...
As some one who shoots to reset this will be a issue for me but I'll just have to treat this trigger as a double action revolver trigger like on my 629 and i do agree with with front strap its not that big of a deal mine has some play but im not worried
Can't believe they screwed this up. I've been waiting for a single action high cap micro 9mm since the p365 first came out.
Held 2 different ones at the gunshop today. No false reset. I think it's hype from people that don't like the gun.
That was my sole purpose for making this video. I’m glad that’s what you took from it. Thanks for the comment!!
THERE IS NOTHING WRONG WITH THE TRIGGER!!! This is mass hysteria. Maybe I got a second generation as I bought it Aug 22. It’s the smoothest firing weapon I’ve ever shot. There’s not a false reset on my gun and the pull doesn’t feel any different from my Walther PPK/S.
Great gun. Love mine!
I like this pistol.
Have a CSX, like it shoot it and carry it, no problems or complaints It is a good thing that I'm not a professional operator .
It is fixable. My CSX came with a disastrous reset issue and the worst trigger you can imagine. I disassembled the entire pistol, polished and honed the trigger transfer assembly that engages the sear. Polished all moving and contact surfaces. Removed the hammer and sear. Worked on that gun about 6 hours. Brought the 8.5 lb gritty, burred up trigger down to a glass break 4.5 lbs. The reset issue is gone, and it has a great trigger now. Come on Smith, no one should have to repair a new gun out of the box like this. Start sending in comments to S&W in a nice polite professional way and maybe they will improve it. In the meantime I bought a P365 to keep me really happy.
Love my CSX installed Ameriglow front sight much better
It seems to me the trigger is catching on the firing pin block when the trigger is released.
If you remove the slide and carefully pull the trigger and let the hammer down then push the disconnected down(located on the right side of the pistol). Then the trigger will reset with out the false reset.
Seem the part of the trigger that depresses the firing pin block when firing is catching in the firing pin release button when the trigger is released.
Rounding off the back edge of the firing pin blocker MAY solve the problem.
I don’t know. After about 250 rounds I have no problem with the gun as it is.
I’m not a gun smith and this is only my opinion.
What's the big deal with the trigger? If you wanted this as your main edc gun wouldn't you drill and practice with it? I felt like if I had it I'd know subconsciously after two clicks the trigger was successfully reset and in a defensive situation I'd be fine as long as I practiced with it especially if you had practice with double action pistols and etc. But I really think this isn't a serious issue or a deal breaker. I think it's up to personal preference and comfort.
Great video brother...I have one I bought it primarily as a Concealed carry. love the balance for such a lil gun, after break in no issues with this lil gem from S&W
It's probably the softest shooting micro. I love mine!
Have the gun it shoots well very accurate false reset went away with break in (rounds fired) but I’ll have to call bullshit on the front grip panel not acceptable I mean would you be ok with a car if every time you drive it the front bumper fell off I mean you could use duct tape and bailing wire to hold it on ….. but would you really be ok with it …. Don’t think all of them do it mine did and from the vids on here I’m not alone
One of the few times S&W produced a bad gun. The trigger is awful, and that reset is a problem. I got rid of mine and I don't believe S&W intends on producing a Performance Center version of this gun.
I am really excited about the possibilities for this pistol. I WANT it to be great. And certainly any trigger CAN be learned. But to me (I'm not a fan of striker fired triggers), the biggest selling point of single action is an awesome trigger. The trigger plus the grip strap weirdness plus several reports of full magazine issues are enough for me to wait and hope S&W comes out with an improved version. But I certainly get your point and the fact that you still like it so much says a lot.
A second version of this comes out and hands down I’m buying
Trigger issue works itself out the more you break it in by firing. I've seen a lot of owners say it goes away with a couple hundred rounds. Lots of youtube reviewers aren't gonna get that many rounds through a new pistol for a review unless they're really about it. If you think about it, time and ammo are more of a concern for a gun reviewer so there's gonna be a lot of people without broken in models because of it.
Thaks for the review that I have found to be much more informative & revealing of the CSX. I agree 100% with your findings. This is a great c/c pistol for me. It is not realy a tactial pistol as a Sig 226 or other tactial pistols that are set up for quick bumps/reset and tactial response. As for a good trustworthy c/c pistol with a 12 round mag , I find it very appealing. The trigger is what it is for genralized c/c pistol. It's all metal which I like, pin fired and very accomdating to a 1911 as I have been used to most of my life. Like another gentleman stated, I have ran about 2k of rounds using different manufactors ammo with only having 2 missfire being both times with crappy reloads.
I hear what you're saying but Smith should not have put this out like this. It's a flaw that should have been considered and corrected before release.
I like mine… the aftermarket will sort it out shortly if you don’t like the stock trigger… that said mine smoothed out after a couple hundred rounds
These videos make me happy...
Trigger happy 🤣😂🤣