Your builds are absolute next level. So much time goes into the precision and fitment with tons of descriptive information. Easily one of the best RC channels on the tube. Both wheels look great, but those bronze ones really make the FJ. Keep em comin
Heck yeah success Build for sure again appreciate you sure I’ll be watching for the next one, want to see it out on the course. Well until next time peace and chicken grease 😁🤙🤙😎
Oh yeah, the bronze looks pretty cool but I think I Gotta say these just fit the rig look wise and everything much better I love it, gosh can’t wait to get working on my Willy’s truck
Man! I love that build. Awesome job. Your corner scale has another tuning option for your side-to-side biases as well. Each corner can be adjusted to achieve a 50/50 side bias by adjusting the shock collars accordingly.
Awesome build mate! The Barrage cage really finished it off nicely. I have nothing against Furitek, but I'm glad they finally have some competition! The Dinky RC and Rock Wolf should compare very closely, with only the form factor and BEC being the difference. My Rockwolf is in the mail so I'll compare them soon!
Good deal! I am the same, I love my Furitek ESCs, but dang they are $$. This seems like an incredible option for a great price. 6.5V at 3A aint too shabby for the BEC on it. No 8.4V like the Ultimate, but hey, that sucks battery faster. Can't wait to see more builds from you! Cheers mate!
Super impressed with it, plug and play with this Nano Bam motor. Just perfectly tuned for it. Just need to set the low voltage cutoff on it with the programmer/software.
Such a awesome build, just ordered three of those stands. I have the Willys Jeep truck, I do have a mofo RC ugly chassis, And FCX 24 axles I’m thinking to go with. Sure appreciate as always what you share still watching now 👍👍😎
I have the same motor and transmission and ESC rock Wolf just need links and rod ends, So I have most of the stuff Man she’s looking sweet dude I love it
You have always done awesome work, and appreciate everything you’ve shared through the years. Didn’t you have a white axial poison spider Some years back ago
You may have to modify the skids to work with the UAF chassis. I think that is a flat bottom, where the sliders are set up for that Injora chassis with the angled skid.
The sliders are set up for a slight angle to the chassis, so I’m not sure if they will jive with the UAF and keep it sitting level. Other than that, the front battery tray of the UAF would need to be cut down to fit the narrow front end of the cab. Probably have to use a tiny battery vs. a stock size one. That’s all I can think of that may hang you up. - oh, and thanks for the compliment on the FJ!
Great video ! What type of radio do you run and what types of receivers ? Just purchased the MOFO ESC and MOTOR as my first upgrade to nicer components
Right on thanks 🤙🏼 I actually just scored from what I can tell is one of the last cages on the planet that you used in this build video from a hobby town in toms River, New Jersey. They are shipping it out now. Super stoked !! Thanks for all the informative info on that build video.
You got the FF mount for that motor? I'm ready to select and purchase from mofo website, but i need to be shure what mount i need to go that way you mount your motor.
Thank you. They are WTMicro wheels as well. He used to only make wheels before he got into the bodies. Now you may have to contact him about wheels. I see them listed on his Etsy shop from time to time along with the various bodies. Thanks for watching.
Your builds are absolute next level. So much time goes into the precision and fitment with tons of descriptive information. Easily one of the best RC channels on the tube. Both wheels look great, but those bronze ones really make the FJ. Keep em comin
Thank you, I appreciate that! BTW, I’ve got a new FJ Cheat Code build almost finished. Keep an eye out! Cheers!
“Where does he gets those wonderful toys?!”👌😂👍man that’s one cool looking little truck! Nicely done!👌😎👍
Haha! Thanks so much! I’m working on another cab only build as I type…
@@bcochener awesome!👌😎👍I’ll keep an eye for it!
Great build, I just dremel'd out under and taken out some material and worked great
Appreciate that! Yeah, the Dremel can solve any problem…!
Heck yeah success Build for sure again appreciate you sure I’ll be watching for the next one, want to see it out on the course. Well until next time peace and chicken grease 😁🤙🤙😎
Oh yeah, the bronze looks pretty cool but I think I Gotta say these just fit the rig look wise and everything much better I love it, gosh can’t wait to get working on my Willy’s truck
Yeah I agree, the red rings feel right at home on it. I do think I like the look of the TPD tires on the bronze wheels a tad better though.
Man! I love that build. Awesome job. Your corner scale has another tuning option for your side-to-side biases as well. Each corner can be adjusted to achieve a 50/50 side bias by adjusting the shock collars accordingly.
Appreciate that!
Say it all the time this is one of the best rides out there
Yeah the Cheat Code is a great platform.
Super clean build once again, the silver wheels pop so good on this one.
Appreciate that! Yeah those wheels did push it over the top!
Wow love that cage that really sets it off 👍👍😎
It's the best part of the build I think.
another amazing build video, doing some crawling in the back yard and watching along
Awesome! Thank you!
I really enjoyed this video 🥊
Appreciate that!
Heck yeah I always learn something watching your videos 👍👍 Sure appreciate
Glad to hear it Andy! Cheers!
Awesome build mate! The Barrage cage really finished it off nicely. I have nothing against Furitek, but I'm glad they finally have some competition! The Dinky RC and Rock Wolf should compare very closely, with only the form factor and BEC being the difference. My Rockwolf is in the mail so I'll compare them soon!
Good deal! I am the same, I love my Furitek ESCs, but dang they are $$. This seems like an incredible option for a great price. 6.5V at 3A aint too shabby for the BEC on it. No 8.4V like the Ultimate, but hey, that sucks battery faster. Can't wait to see more builds from you! Cheers mate!
The one I’ve been waiting for!
Very sweet man 😋💥
Thank you!
Good stuff! I’ve been wondering about the rock wolf!
Super impressed with it, plug and play with this Nano Bam motor. Just perfectly tuned for it. Just need to set the low voltage cutoff on it with the programmer/software.
@@bcochener keep up the good work. I always pick up something new when I watch your builds!
I take out one whole turn on the front and on the rear of the link on each side of the bottom length for the front end
Heck yeah Brian Love that cage, The whole rig is looking sweet 🤙🤙😎
Love you’re builds man
Appreciate that!
Very nice! I recently used a barrage cage on my 6x6. The meus multi function light bar clamps on the side of cage really neatly.👍👌🍻
Ooh nice. That’s sounds awesome.
Yes it is killer 👍👍😎
Such a awesome build, just ordered three of those stands. I have the Willys Jeep truck, I do have a mofo RC ugly chassis, And FCX 24 axles I’m thinking to go with. Sure appreciate as always what you share still watching now 👍👍😎
Who makes the stand
new vid lets go
So good mate! Waiting for WT micro to start printing again so I can have an FJ
Good deal, they are incredibly detailed little bodies!
@@bcochener just wish he or anyone would make an LC70 😍
@@timbertime738 That would be unreal!
You are the only one with the Rock Wolf Esc in a video. Can you please make a video programming it brushed/brushless and play with the settings?
Great idea. I will go over it a bit more in the next build... coming soon! Cheers!
I have the same motor and transmission and ESC rock Wolf just need links and rod ends, So I have most of the stuff Man she’s looking sweet dude I love it
Oh yes it could look a whole lot better if it was sitting over here at my house 😁😁😁😁
haha! nice try.
You have always done awesome work, and appreciate everything you’ve shared through the years. Didn’t you have a white axial poison spider Some years back ago
Appreciate that Andy. No, never had a Poison Spider, must have been some one else - SJTA! Haha!
Heck yeah that’s pretty stinking freaking sweet love it. I’m going to build a chassis for mine like this but probably with the mofo ugly chassis 👍👍😎
You may have to modify the skids to work with the UAF chassis. I think that is a flat bottom, where the sliders are set up for that Injora chassis with the angled skid.
This is so sweet, you would use the cab eventually, got any tips for mounting it to my UAF chassis?
The sliders are set up for a slight angle to the chassis, so I’m not sure if they will jive with the UAF and keep it sitting level. Other than that, the front battery tray of the UAF would need to be cut down to fit the narrow front end of the cab. Probably have to use a tiny battery vs. a stock size one. That’s all I can think of that may hang you up.
- oh, and thanks for the compliment on the FJ!
Yeah super sick, I just checked and my FJ cab will be painted in the same mica red lol@@bcochener
Great video ! What type of radio do you run and what types of receivers ? Just purchased the MOFO ESC and MOTOR as my first upgrade to nicer components
Thanks! I use a Flysky GT5 radio and FS2A-4CH as the micro RX - or I use the FSBS-6CH. All can be found on Amazon. Mofo all the way! Cheers.
Right on thanks 🤙🏼
I actually just scored from what I can tell is one of the last cages on the planet that you used in this build video from a hobby town in toms River, New Jersey. They are shipping it out now. Super stoked !! Thanks for all the informative info on that build video.
@@spheli-13 Ah, no way!! What good luck on that find. Cheers mate!
Love the build ❤ what size links are they?
Appreciate it. Gladiator length.
You got the FF mount for that motor? I'm ready to select and purchase from mofo website, but i need to be shure what mount i need to go that way you mount your motor.
Yes, that is correct, the FF mount. It can be rear facing if you flip your transmission backward as well.
Thank you! What spec. recommend for perform slow crawl? @@bcochener
@@montoyaesteban6 the Nano Bam is only offered In 3200kv. Not sure what spec you’re talking about.
My fault, I ordered the BAM 1900KV 18t. But i think i can run i to as well.@@bcochener
@@montoyaesteban6 it is quite a bit larger and heavier than the Nano version. It may fit… great motor though!
Love the build !
Where did you get the wheels ?
Thank you. They are WTMicro wheels as well. He used to only make wheels before he got into the bodies. Now you may have to contact him about wheels. I see them listed on his Etsy shop from time to time along with the various bodies. Thanks for watching.
What axles are you using
@5:32. CCxRC
@@bcochener Thank you I went back and looked after I already asked you. Great looking build
@@kevinraabe8643 good deal!