i was thinking that they come pre-assembled ,not this in one particular but in general. lots of parts and step for a beginner.thanks for sharing your experience with the product
It's nothing too special... I tried running klipper on my minis and after installing it on one of them, I went back to stock firmware after a few days so I don't have to slice twice for that single printer... The raspberries were too expensive to run it on all of them so I still didn't automate them. I'll make a video about everything I did with 3d printers sometime in the future. I don't want this channel to be about 3D printing but electronics projects so I'll keep it as an idea until the time comes :)
Hey, sorry for a late reply. I use FYSETC dual drive extruders from Aliexpress. They are great but the parts come printed in PLA. I sent them a message and they sent me the STL files so I printed the parts myself in PETG and everything is okay now. I had to change E-steps and extruder direction but both settings can be changed in stock firmware without voiding waranty
@@jordanhogetoorn7996 You can change the extruder direction in the menu in stock firmware, you need to hold HW options to enter a special menu and you can do it from there
i was thinking that they come pre-assembled ,not this in one particular but in general. lots of parts and step for a beginner.thanks for sharing your experience with the product
Hi I would love to Know more about your 3D print farm and how your run it. Would you make a video about it.
It's nothing too special... I tried running klipper on my minis and after installing it on one of them, I went back to stock firmware after a few days so I don't have to slice twice for that single printer... The raspberries were too expensive to run it on all of them so I still didn't automate them. I'll make a video about everything I did with 3d printers sometime in the future. I don't want this channel to be about 3D printing but electronics projects so I'll keep it as an idea until the time comes :)
Thank you for share your experience with prusa mini clone. Just one question, Is it possible to update the firmware when Prusa release a new one?
Yes, it's possible! It's the same board as in the original
whats the extruder upgrade you did, did you need to change esteps?
Hey, sorry for a late reply. I use FYSETC dual drive extruders from Aliexpress. They are great but the parts come printed in PLA. I sent them a message and they sent me the STL files so I printed the parts myself in PETG and everything is okay now. I had to change E-steps and extruder direction but both settings can be changed in stock firmware without voiding waranty
@@Djambo57 extruder direction, by gcode or swap wires?
I orderd 1 kit to test first :D
@@jordanhogetoorn7996 You can change the extruder direction in the menu in stock firmware, you need to hold HW options to enter a special menu and you can do it from there
@@Djambo57 amazing... just installed it but looks like i have overextrusion. I followrd the 409 estep, did you or do you have something else?
@@Photograaf11 you will have to calibrate esteps yourself then... I didnt do anything else apart from that
Hey, Do I need to print the body my self or does it come included in the box?
You need to print all plastic parts, thats why its cheaper
@@Djambo57 Oh ok thank you
Hi, I was wondering, what 3d prints do you sell most of? I'd like to try it myself, and you look successful.
The problem is that the market is very saturated, and everyone can copy others' ideas, so you really have to stand out to make something of it