Just put my second flight on this jet and I’m blown away by the performance and handling! Super nice fan unit and motor. Running a Kinexis 30C 5000mAh li-po and it’s just about perfect. 👌🏼 Thanks y’all!
I’m on my 4th eflite plane I got P-39 F-16 F-16 again because I crashed it then I recently ordered this one I like quality and that’s why I keep on buying eflite planes you guys keep on producing high quality models as long as that doesn’t change you guys got a loyal customer thank you started flying in September of 2019
Could the flaps be reconfigured to work as full span ailerons like the Havoc? I think I’d just need to change the length of the pushrod so that the flap is retracted when the servo is centered, but will it deflect upward?
Awe man that thing is gorgeous. Fortunately I live next to a huge feild. Unfortunately there are complaints from the sound of edfs from residents nearby 😞
Hey Guys!!! LOVE THIS JET!!!! I've always kept an arms distance away from EDF jets (as Jason well knows, and I think I've even discussed this with Alex), but this one just might make me go to the dark side! A VERY nice rendition of a jet I grew up with, living not even 8 miles from Miramar NAS back in the 1970's. I LITERALLY saw these jets everyday back when I was a kid...GREAT JOB HORIZON 👍😎!!!
I do have an actual question that I don't think I saw on the manual or in your live video that I missed. Inherently the F4 needs up elevator, I didn't see anything in your instructions on that. Also I didn't see any indication of any flap to elevator mixing typically you need a little bit of up as well. But other than that so far it looks good to me just need to get someone who can actually test it on other places then you're frigid Midwest.
When I first saw the F-4, I thought it was a fiberglass composite jet like the old F-4 Phantom 32 DF 80mm jet. was a little disappointed to find out it is a foamy but id still buy one. speaking of composite Horizon, when are yall going to come out with another fiberglass/composite plane or jet? I know the Phantom 32 DF did not sale well, but I'm sure with a good choice or jet, yall will sale many. maybe a L-39 or Viper?
Hello. I would like to know if HH team is thinking or have a plan to put back in the inventory this amazing 80MM F4 Phantom again. I would like to buy one. Please, Please !!! Thanks
Nice model, it’s very tempting. Don’t listen to the dinosaurs complaining about it being foam, they can take their non scale looking and flying balsa planes back into the tar pits they crawled out of! 😁
I am new to RC airplanes. I like them. But I am wondering why RC airplanes are made of foam but drones are not foam and still able to fly very well. Have to be very careful with foam because foam are easy to break. Fragile. lol 😂👍
Blauer Elefant Ok thanks for explanation! I will start with foam airplanes. I am glad with SAFE technology for foam airplanes to avoid the crash. Foam parts are still cheap. Affordable lol 😂👍
Oh man, talk about a tease... You show the brand new E-Flite 80mm Phantom II and you stick a 'sale' bumper at the beginning of the vid, indicating a 'sale' on the umx micro planes, lol.
Beautiful plane. Ive contacted hh about making a beechcraft model 18 but i get the yeah sure someday reply, i really need everyone to call them and hound them until they make a beechcraft model 18 because its a truly beautiful plane. Thank you.
Any time an RC manufacture plans on making a particular model airplane the first thing the manufacture has to do is to ask the company that made the real life size airplane if they would grant them a license to produce the models. Case in point I have confirmed that Diamond Aircraft denied another manufacture a license to make the DA42. So from what I have seen there are no other Beechcraft models currently being made so there could be a chance that Beechcraft has not granted anyone a license that may have asked.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
F16, F15 and now the sexy F4. My kids have zero chance of going to college now.
Just put my second flight on this jet and I’m blown away by the performance and handling! Super nice fan unit and motor. Running a Kinexis 30C 5000mAh li-po and it’s just about perfect. 👌🏼 Thanks y’all!
I’m on my 4th eflite plane I got P-39 F-16 F-16 again because I crashed it then I recently ordered this one I like quality and that’s why I keep on buying eflite planes you guys keep on producing high quality models as long as that doesn’t change you guys got a loyal customer thank you started flying in September of 2019
H.H. Please bring this EDF back.
Could the flaps be reconfigured to work as full span ailerons like the Havoc? I think I’d just need to change the length of the pushrod so that the flap is retracted when the servo is centered, but will it deflect upward?
How could you discontinue this gorgeous icon????? I want it so bad.
Because they wanted to focus on non objectionable jets that’s wanted by the masses
Pulled the trigger on this one! Love the livery!!!
It’s beautiful!!! Definitely will buy
Awe man that thing is gorgeous. Fortunately I live next to a huge feild. Unfortunately there are complaints from the sound of edfs from residents nearby 😞
Hey Guys!!! LOVE THIS JET!!!! I've always kept an arms distance away from EDF jets (as Jason well knows, and I think I've even discussed this with Alex), but this one just might make me go to the dark side! A VERY nice rendition of a jet I grew up with, living not even 8 miles from Miramar NAS back in the 1970's. I LITERALLY saw these jets everyday back when I was a kid...GREAT JOB HORIZON 👍😎!!!
I do have an actual question that I don't think I saw on the manual or in your live video that I missed. Inherently the F4 needs up elevator, I didn't see anything in your instructions on that. Also I didn't see any indication of any flap to elevator mixing typically you need a little bit of up as well. But other than that so far it looks good to me just need to get someone who can actually test it on other places then you're frigid Midwest.
Hey Victor, Skip here. The AS3X model raises the elevator as you give throttle automatically to enhance take of and flight.
Been flying the F16 for a while now. The A10 as well. So.. this F4 is nexr! And...15% off until the end of the month (july 2020). Can't beat that!
When I first saw the F-4, I thought it was a fiberglass composite jet like the old F-4 Phantom 32 DF 80mm jet. was a little disappointed to find out it is a foamy but id still buy one. speaking of composite Horizon, when are yall going to come out with another fiberglass/composite plane or jet? I know the Phantom 32 DF did not sale well, but I'm sure with a good choice or jet, yall will sale many. maybe a L-39 or Viper?
Why did they discontinue it are they going to reissue it
This is a quality product manufactured by FMS. It’s very scale and just a tad smaller then the Freewing version. A must have for Jet guys.
We would love to see a scale 90mm next guys!
Buy Freewing them, available and better fitting quality
@@RCREVIEWS101 yeah because you have tested one already right . NOT !! typical keyboard cowboy . please dont reproduce
And then 100mm 12s
Hello. I would like to know if HH team is thinking or have a plan to put back in the inventory this amazing 80MM F4 Phantom again. I would like to buy one. Please, Please !!! Thanks
horizon take my money lol
@Horizon Hobby please make a Messerschmitt 262 or F 22 Raptor with thrust vectoring or SR 71 Blackbird, the coolest jets ever in my opinion
Nice model, it’s very tempting. Don’t listen to the dinosaurs complaining about it being foam, they can take their non scale looking and flying balsa planes back into the tar pits they crawled out of! 😁
I love it Racerx!
I am new to RC airplanes. I like them. But I am wondering why RC airplanes are made of foam but drones are not foam and still able to fly very well. Have to be very careful with foam because foam are easy to break. Fragile. lol 😂👍
Blauer Elefant Ok thanks for explanation! I will start with foam airplanes. I am glad with SAFE technology for foam airplanes to avoid the crash. Foam parts are still cheap. Affordable lol 😂👍
Blauer Elefant Thanks for your advice. Appreciate it. 👍
Great video! Now do one on the Fokker that was announced over two weeks ago...
Has the team looked into umx plane with retracts?
great review guys... now all you need to do is make draco!
YES! A Carbon Z 85in Draco!! Mike Patey would be proud...and probably give permission to model it...
Oh man, talk about a tease... You show the brand new E-Flite 80mm Phantom II and you stick a 'sale' bumper at the beginning of the vid, indicating a 'sale' on the umx micro planes, lol.
Cool video!!! Jet look's awesome!!! Thanks for the video!!!
Beautiful plane. Ive contacted hh about making a beechcraft model 18 but i get the yeah sure someday reply, i really need everyone to call them and hound them until they make a beechcraft model 18 because its a truly beautiful plane. Thank you.
Any time an RC manufacture plans on making a particular model airplane the first thing the manufacture has to do is to ask the company that made the real life size airplane if they would grant them a license to produce the models. Case in point I have confirmed that Diamond Aircraft denied another manufacture a license to make the DA42.
So from what I have seen there are no other Beechcraft models currently being made so there could be a chance that Beechcraft has not granted anyone a license that may have asked.
nice plane and bench review. Need to have Ryan Ramsey do the flight review, then you'll sell some planes
Your missing a pilot!!! One guy hopped in and took off ?
Why ONLY one pilot?? For the money asked they should have added a second few cents head!!! Nice plane, pity for the second pilot missing
You needs a twin 90mm F14 tomcat
Can you please make a Boeing Airliner.
tomcat
First