Have you ever seen Project Farm? He does reviews just like this. I just can't get enough of it. I'm glad I found this channel that also does actual real-world tests on tools.
The old corded tools were made to last my husband just had to get rid of a tool after 30plus years and it worked great he tried to replace a part but it was not available they need to go back to making quality
My Dremel corded is also about that old and still working great. It has a flex shaft that gets hot but other than that, it works. Cordless is handy though.
Good review. I chose the Milwaukee because I already have M12 and M18 tools. I also got it on sale for $78 (bare tool) so that really added to the value. I added the Dremel quick cap as it fits the threads on the Milwaukee perfectly and eliminates the need for the wrench.
@@marcowens3522 True. The $78 was also free shipping. FYI, when you purchase Milwaukee tools on Ebay there is no warranty. Despite that, I have purchased various Milwaukee tools on Ebay.
@@marcowens3522 That makes sense. I didn't realize there were any authorized Milwaukee dealers on Ebay. Like I said, I've bought from various sources. I don't worry too much about Milwaukee warranty. For any out-of-box failures I would expect the seller to step up.
Dremel all the way for me. I bought my corded dremel 50 years ago when I was a teenager and it is still going strong. I am retiring and moving to all cordless tools after we downsize so this was very helpful. I have milwaukee 12V but I will grab the 8260.
I'm new to Dremels, but this thing has been great. ruclips.net/user/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.
Excellent review! One suggestion, if I may, to have a consistent force applied, you can stabilize the tool itself (or affix it to a base) and lower a rebar of the same weight onto it without applying additional pressure.
Thank you for a great comparison. Yes, the 8260 uses Bosch brand green series (home and garden) 2 or 2.5 or 3 ah batteries. Dremel is also under warranty and service from the Bosch brand in Europe.
Good review with useful information. My Milwaukee 2460-20 burnt out after a few minutea of moderate use while cutting some aluminum down spouts. Total time on the tool was only a couple of hours. Now it just flashes when I turn it on. Looking online I saw it is a common problem. Replaced the 2460-20 with a Dremel 8220 because I need a tool that is reliable. What does not make sense is how the 2460-20 can have so many four and five star reviews.
Thanks! Intersting I haven't had any issues with the 2460-20 yet, I wonder what the % of units are defective. The 8220 seem like a good Dremel for the money.
@@Tools-Tested As near as I can tell the 2460 works fine up until it doesn't. The failures are usually instant, not gradual, and I do not know the percentage of these tools that fail within the warranty period. If the fault is a design flaw like inadequate heat-sinking then it could eventually affect 100% of the tools if they are used. Of course the term, 'defect", depends on the point of view. For tool owners anything that causes a premature failure is a "defect". For corporations anything that causes a catastrophic failure after the warranty has expired is a good way to increase sales. Search for "Phoebus Cartel" to see more information about premature product failures. It would be interesting to know how many people have experienced the 2460's four lights flashing three times and then dead failure.
I have the milwaukee and it's been great so far and having the m12 platform is what I think sets it a step above especially when you can put one of the bigger 12 volt batteries on it and it lasts forever
@@moshet842 My point is clear. Does Milwaukee have a planer and palm router for 12v? The answer is No. I own them and I use them all the time and I also own a lot of M12s, but still no planer and palm router.
@@ProxyFinal I didn't know you were referring specifically to the 12v line. Overall, Milwaukee has more tools, but you're right they are kinda deficient in the 12v line. But again, they have the excellent 12v palm nailer no one else has.
I have had my M12 milwaukee dremal for almost a year now. The 2amp battery barely lasts through a small job. But you slap a 6amp on there and it's a whole different animal. I have the M12 3/8 ratchet to. Soon I'll be getting the long neck 3/8 as well.
Nice comparison. I ordered the 8220 for $89. I haven't got it yet. It comes with an accessory kit, battery and charger. The Milwaukee 2460-20 is $99 just for the tool. Another $52 for 2 batteries, $17 for a charger and no accessories. That makes the Dremel a much better deal.
Thanks for taking the time to make this video. I have a Bauer from Harbor Freight and I don’t use it much. I charged it and tried to use it and it was dead. I think I will go to Home Depot and pick one out. Thanks, it was a interesting video.
perfect review .. my first rotary tool was a drimel.. I been use them since 20 years ago.. and I still use them till now.. many brands came and go.. but the best stills on..
the thing is, the ppl buying the Milwaukee, most likely already have a supply of batteries rated up to 6AH, and are only paying the price of a skin-only product. so in most ppl experience, the Milwaukee is going to have vast multiples of battery life over the other brands, AND they're going to be paying about 2/3s the price you listed. also, did you factor in the time it took you to change the disk on the Dremel when you applied way too much pressure (likely because the unit draws more power than is required to do the job efficiently) and destroyed an almost full wheel in a matter of seconds?
Thanks for the in-depth demo. All I can say is; you know your brand is the one to beat when the brand name becomes synonymous with the type of tool. So, “Dremel” is like “Kleenex!”
I was having a bad day, then saw this on the overhead and remembered that there was this brushless dremel I heard about. The fact that you showed Bosch batteries are finally compatible is a win for the brand and the consumer. The thing is a beast almost as if batteries nowadays are more powerful than corded tools. Even if Milwaukee announces a brushless rotary, I will stick with dremel/bosch and I will opt for the Ryobi 18v brushless rotary tool instead. I think Milwaukee really missed their chance. Good job, Bosch.
Thanks!, yep it’s about time with the battery, not a lot of options before. I definitely was not impressed with the Milwaukee after the testing even though I thought it was going to place atleast second
I was already using the M12, but bought the 8260 on sale because I also have Bosch 12V tools for which I can make use of the 3Ahr battery (my other Bosch batteries are only 2Ahr)
I just got the Milwaukee M12 as a free tool with a charger/battery package from Home Depot. They have and online only deal right now you get a charger and two batteries with a free tool for $129.99.
Good review. I have the M12 one, but haven't really put it through the ringer. Hoped it would do better, but like you said, I was getting into M12 overall so got this. But tool just by itself, Dremel is pretty nice. Something for you and your viewers if you didn't know already, some Dremel accessories fit on the M12. I got the Dremel keyless chuck, and put it on the M12. Fits and works great.
I have a corded knock off dremel thing, I have used it about 4 times in the ten or twelve years I’ve had it. Cost about £20 including loads of bits. Cost-benefit about right !
I was looking at the 8220 until I saw that you can use other batteries on the 8260. Both are very good tools but I went with the 8260 because of the brushless feature and the app. Great video and keep up the great work...thx
Dude!! 8220 kept up with the more expensive ones...should've won 🏆 as the best budget dremel....2nd fastest charger, 2nd fastest rebar cutter, top 31rpm etc etc
@@Tools-Tested thanks for the reply! HD has recently been dropping the price on the M12 rotary kit (tool, battery, charger, and case) down to $79 but have missed it both times. Great deal at that price point.
While I love Dremel Products, I will probably go Milwaukee since I am already in the M12 family. Have you tried the Milwaukee with the higher amp battery? I wonder if that makes any difference?
Yeah the higher ah battery’s make a huge difference, see test video. ruclips.net/video/MjmuRbTwCk8/видео.html FYI Milwaukees brushless version is set to hit shelves this month 2525-20.
Great Review as usual.. love your in depth analysis. I’m wondering if you put a CP2.0aAh or the HO2.5 battery on the M12 if the performance would have been better. Those 1.5Ah M12 batteries are pretty trash I only use them in my flashlight and Chalk Gun .. but I plan on getting the M12 version later on
Thanks, yeah I did an update video with 8240, 8250, Ryobi, Proxon. Just for fun I put a 6ah on the Milwaukee and wow did it ever wake up. I believe it actually did better then the 8260.... Hoping to do the M12 again with the 2.5 and 5.0 soon!
Great comparison, but one crucial test was missing- These tools’ ability to handle load under lower speeds. Torque is crucial in most applications, as performance is often improved at lower speeds.
Great review, it would be helpful if the warranty info was provided, esp since the Chicago Electric dropped & stopped working, I'm curious, would you be able to return for another?
Thanks for making the video, great info. For my use, I'm leaning towards the 8220, but am going to continue to look around some more to see if anything else turns up.
No problem, FYI the 8240 is coming out this week. Looks like limited Lowes stores have them in stock. It’s $99 like 8220. All I know right now is it uses the Bosch battery like 8260 and soon 8250.
I ended up going with the Dremel 8250. I didn't need it wasn't Bluetooth on my rotary tool.. The first unit I bought was faulty. It wouldn't turn back on after it was turned off unless the battery was taken out and put back in. I returned it to Lowe's and didn't have much confidence in the tool, but the second one has been working like a champ. I absolutely LOVE this tool. Thanks again!
As someone who has bought several non Dremel (only to regret it) rotary tools over the last two decades this seems to have just about what I have been wanting for the last decade. easily replaceable battery, brushless motor and a significant amount of torque. I have it already on order.
@@Tools-Tested Been using the 8260 hard for the last week and it performs better than my 4200 (the worst Dremel I have bought, with it's one off never to be used again chuck that has too much run out and requires special collets) with the added benefit of wireless (although if you use it hard get an extra battery) Think I'm going to buy a Bosch fast charger for it. Overall I would say the best Dremel I have bought. Now I'm off to do some routing.
So glad I found this video. Wanted a good comparison of the two Dremels. Was debating if the extra $60 was worth it, and after watching this, I feel comfortable saying it is. Thank you! I run the 12V Milwaukee tools, but the warranty of the Dremel is what is kind of drawing me towards it, that and the brushless motor. Definitely feel like a brushless motor is a great advantage to something like this.
No problem! Yep I run the 12v Milwaukee and was wondering how it compared to the “Dremel brand” and was actually quite shocked. I thought it would have been at least better then the 8220…
It's not worth the extra money, but if you get it and you have older 8220 batteries they will work with the 8260 but it requires forcing them in. From the outside they look almost identical but somewhere theres a difference that makes it difficult to force in. But I'd suggest getting the 8220 and a Versa and have $10 left over, I think you can even get the 8220 for $75.
Thanks for the video. I've always bought Dremel brand rotary tools, but I also own multiple Milwaukee 18v/12v tools and have 12v batteries from 1.5Ah to 4.0Ah so I thought what the heck. I bought the Milwaukee a while back and I have to say, It's probably the most disappointing Milwaukee tool I own. It's wimpy, loud, and vibrates like crazy. The loudness and vibration come from the poor quality and lack of precision. The exact same bit that runs smooth as glass in a Dremel, vibrates like hell in the Milwaukee. There is no comparison in quality between the two. I came here to find a comparison of the two Dremel's and I think I'm going to spend the extra and get the 8260. (Edit: I may get the 8250 as it's $20 cheaper and I have no plans of using the Bluetooth and couldn't care less about a lit up LED logo).
No problem! I will say the M12 seems to have a lot more power with the XC6.0 in my testing which is interesting. Yeah defiantly the 8250 over the 8260, I just wish the 8250 and 8260 could use the larger Bosch battery with the base (4ah+), sadly the base hits the tail on the tool.
Realistically, what can one expect in terms of battery life for the Dremel 8220 vs 8260? From your experience in heavy continuous use and occasional bursts/tasks? Maybe if you were to make a test for this, maybe keep them running non-stop with some "heavier" bit common to all and at least have a relative idea. Thank you!
They claim 2x the 8220. That being said the 8260 also comes with a 3ah vs the 8220 @ 2ah. Looking at the no load run time you can defiantly see a difference. Im hoping to build a dyno so I can actually get run time and load more accurately. But I would expect like they claim, almost double due to the battery and brushless motor.
Bought a Dremel 8220 in 2012 here in Canada... Used it a few times, was disappointed with the battery life, wasn't sure if it was the battery that was a dud or just normal(cost of oem batteries wasn't looking like a viable option to find out and availability was also an issue), was about to just accept the idea it was a bad purchase but took a shot at buying 3rd party Shentech(personally believe it was luck of the draw) branded batteries off amazon and those had about 3 times the battery life, completely changed the usability of the dremel for me..... ** there's these generic 1-1/2in(1/8 shank) grinder wheel attachments that can be purchased that are a great combo with it, used it to cut part of my muffler pipe off, far better than the oem dremel grinder cut off wheels:)
The max RPM on the 8260 only goes up to 30k when the battery is sufficiently charged. I just bought one and noticed there was no difference between 25k and 30k. The battery was low so I charged it, and the 30k stepped up to a higher speed. Maybe your battery wasn’t fully charged when you did the RPM test?
lol your previous generation Dremel is so much nicer then my cordless Dremel, not to mention how much nicer still the newest version is. I believe my cordless Dremel may be the very first generation of lithium powered cordless Dremel. Still works and serves me quite well honestly.
Useful test, but I was hoping you'd be doing some torque testing. Two things disappointed me about my current 8220. First the plastic accessory mounting screw thread quickly got stripped making some of the accessories useless and second the torque is really poor at slow speeds meaning I often have to run at higher than ideal speed just to prevent stalling. The torque issue should theoretically be improved with a brushless motor. This would explain why the 8260 cuts the rebar faster despite slower maximum speed, but also throws shade on your maximum speed measurement. If the brushed motor machines immediately slow down when loaded, the no-load maximum speed is pretty irrelevant! Even some subjective tests of torque at low speeds would be useful. Also at the 8260 price point I would hope for a die-cast metal nose end to strengthen the mounting screw and stiffen the bearing mount to take side-loads better. From your pictures, it looks like it is still plastic, but maybe better quality plastic than the 8220?
Spot on. I don’t own Milwaukee anything(DeWalt/FLEX/Makita), still I’m considering the Milwaukee simply for the useful torque. I’ve seen them handle load very well.
@@WontSeeReplies Yes, since this I have replaced my 8220 with an 8260. I would have considered other brands as the 8260 is rather over-priced, but I had a lot of Dremel accessories which would have had to be replaced. The 8260 does have a plastic nose, but it seems to be better quality plastic, or maybe I just know to be more careful! It does however meet my expectation of much better low speed torque (and the speed is maintained much better as it is loaded). Strangely Dremel does not really emphasise this benefit, implying it is just a maintenance thing (no brushes to wear out). I only knew to expect this because I am an EE who knows the theory!
Bought the dremel 8250 for the brushless motor and bosch battery, the switch failed on the first day. Lifetime warranty is bogus, dremel says if the tool is defective it will fail in the first few months. If the tool fails after years of use it's not defective, it will be considered wear and tear therefore it won't be covered under warranty. Good luck
So, now that you have both the 8220 & 8260, which one would you advice I go for & why? being my first dremel tool and yes, I'll be cutting, polishing & the whole 9.
I would say the 8220, yes the 8260 has about 20% more power but here its currently almost double the price vs 8220. To me its no worth the extra money, and the 8220 was Dremel's top cordless unit for 10 years.
@@Tools-Tested What does it come in? the 8220 comes in a platinium package here with a proper toploader box with drawers in the front here in Europe, 1 charger, 2 batteries, 5 attachments and 56 accessories for $170 Now, what do you get in the 8260 package and for how much $?
@@Tools-Tested Accessories are drill bits, cutting discs mandrels, sanding drums etc, but you forgot to mention how many attachments do they come with? attachments like straight-line and circle cutter, router etc, you know what I mean?
I really think that the 8260 is the best option but when I made the search the model isn’t available in Mexico 🤦🏻♂️ the damn tool is made in Mexico but isn’t available! Only the 8220 and the Milwaukee, what’s the best option of this two?
That’s crazy, made there and isn’t available…. Right now if you don’t plan on owning other Milwaukee m12 tools go with the 8220. BUT I did just learn yesterday they are releasing a 8240 and a 8250 so if you can wait it might be worth it. Both use the new Bosch battery.
Interesting I will have to test that, Thanks for the info. Do you think they are the same as Ryobi? seeing TTI also owns them, they did just release a similar easy lock.
@@Tools-Tested I've tried only those 2. I had 6 cutting wheels 2 Milwaukee and 4 Dremel for a quick job using first the Milwaukee which cut half of it and I barely finished with the Dremel 🥺 I started to panic when I noticed the Dremel wheels durability.
Can i ask. I've a cheaper black & decker one. and she vibrates enough to bounce off. As far as smoothness of operation when you trying to sand delicate areas, or engrave etc. are all of these products on par?
Yeah they all have a good amount of vibration at high RPMs, only real alternative is to mount the tool and use a extension or something like the Ryobi power station amzn.to/3EKIHNE
Yeah it now works in 8240 8250 and 8260, Note thought the larger battery's (6ah) with the base only fit the 8240. The base hits on the 50 and 60 and won't go all the way in,
Sadly I think my 8220 bit the dust today...it no longer turns on even on a full charge, frequently have to pull the battery out and reseat it multiple times before it works. Wonder if I should just jump ship and get the m12 as I already have an m12 screwdriver with a pair of batteries. Faster charger too (30 minutes compared to 90, readily available spare batteries)
Seeing you have m12 already its worth a shot in my book. I will say if you have the higher AH m12 battery's they also help in performance of the rotary tool.
I know the 8220 comes with more attachments, but the battery basically only works with the tool. I did more testing with the M12 and found with a 6ah battery it performs better then the 8220. HomeDepot currently has a decent deal on a kit www.homedepot.com/p/Milwaukee-M12-12V-Lithium-Ion-Cordless-Rotary-Tool-with-One-M12-4-0-Ah-and-One-M12-2-0-Ah-Battery-Pack-and-Charger-48-59-2424-2460-20/317064263 At least with the m12 you can use the battery’s in other m12 tools if you want to expand and use the m18 charger.
I own 2 of the 8220 models (1 still in the case). I also own the M12 system but not the "dremel" (needed for a job so purchased what was available). I wish that batteries were for the 8220 were easily available.
the RPM might be limited to reduce wear on the bearings and dremel tools. If you watch recently youtube studies about abrasives, people determined a HUGE difference in run time with different cutting tools at low and high speeds. I think you sold me on the 8260, the milwakee is too loud and I feel like after two years its starting to get balance problems with the spindle. I have been waiting for a brushless one for a long time.
Watching this still have to go with the m12 because it’s still one charger I have to have and I have like 40 of those batteries. So I can run all day as with dremel I will have to buy all new batteries and have more chargers then I already have
@@Clemson-rc2yq Yep I think Dremel is more for hobbyists, batteries are hard to come by and are $$$ compared to Milwaukee. Really like to see Milwaukee release a brushless version.
Well played. I was going to go with Milwaukee, but since creme decide to shsre battery with Bosch, I already have batteries. Dremel sells more rotary tools than Milwaukee. Not sure who or why anyone would want chsnge rpm Bluetooth app. But ever since they legalized the grass, things have been just getting more awkward. Thank you.
No problem, I will say the Milwaukee performance is a lot better with a 6ah battery. I did a updated video with the new 8240 and 8250. Yep really don’t understand the blue tooth…
I'm going with the 8220 when I get the money. hands down the best on the Market so far. also the only rotor tool of the type that has a brushless motor! this is key
You might want to wait, Lowes is currently getting the new 8240 in stock this week. Don't know much about it yet, other then it is priced the same as the 8220 but uses the new Bosch battery's like the 8260. The 8220 has a brushed motor, that's not as serviceable as the older Dremel's with brushes. 8260 is the only brushless, soon there will also be a 8250 which is 10 dollars cheaper without the Bluetooth.
using nickel oxide hydroxide and metallic cadmium as electrodes, they were used before Lithium. Charge times are typically higher and the amount of cycles you get before the battery starts to deteriorate is less then Lithium.
My dremel sucks , keeps on dying and stops working while using it hard , I have to shut it off and restart it constantly … also it takes 1 hour to 2 to charge … sucks big time … Buying the Milwaukee next cause I’m on the platform ..
So with the 5.0 HO the brushed Milwaukee will beat the 8260 see video ruclips.net/video/MjmuRbTwCk8/видео.html Because of the design the 8260 cant run the 4 and 6ah batterys sadly. Hopefully in a few weeks im going to dyno them against the new brushless Milwaukee.
Wow virtually no one does reviews like this! As an engineer I highly appreciate it. Real data, real comparison. Awesome . Thanks.
Thanks!
This was one of the first, I did like this.
I agree. Too many just compare specs. I can read the specs myself. I want to see how they equate in real world performance. Engineer as well.
Have you ever seen Project Farm? He does reviews just like this. I just can't get enough of it. I'm glad I found this channel that also does actual real-world tests on tools.
Quantitative real world tests are great. Project Farm and Torque Test Channel are both good too.
Totally agree great breakdown
My corded model 395 type 4 Dremel was one of the first tools I bought with my own money back in 1995. Still going strong close to 30 years later.
Nice, goes to show how things were built to last back then.
Mine also after 33 years, until today, when it finally died
The old corded tools were made to last my husband just had to get rid of a tool after 30plus years and it worked great he tried to replace a part but it was not available they need to go back to making quality
My Dremel corded is also about that old and still working great. It has a flex shaft that gets hot but other than that, it works. Cordless is handy though.
I have a 370-5 that still works great after 40-ish yrs. Would like a cordless though.
One of the best and most honest tool reviews. Thank you for being a straight shooter. This review helped me a lot
Thanks! Yep just my honest opinion, I'm not bias when it comes to tools.
I just callout as I see it.
Good review. I chose the Milwaukee because I already have M12 and M18 tools. I also got it on sale for $78 (bare tool) so that really added to the value. I added the Dremel quick cap as it fits the threads on the Milwaukee perfectly and eliminates the need for the wrench.
Yeah if you already have Milwaukee you. Can’t go wrong, that endcap makes it nice!
You can get it brand new on eBay for $75.
@@marcowens3522 True. The $78 was also free shipping. FYI, when you purchase Milwaukee tools on Ebay there is no warranty. Despite that, I have purchased various Milwaukee tools on Ebay.
@@eosjoe565 false if you get them from a milwaukee dealer on eBay you do get a warranty and that $75 is from a milwaukee dealer and free shipping.
@@marcowens3522 That makes sense. I didn't realize there were any authorized Milwaukee dealers on Ebay. Like I said, I've bought from various sources. I don't worry too much about Milwaukee warranty. For any out-of-box failures I would expect the seller to step up.
Dremel all the way for me. I bought my corded dremel 50 years ago when I was a teenager and it is still going strong. I am retiring and moving to all cordless tools after we downsize so this was very helpful. I have milwaukee 12V but I will grab the 8260.
Dremel has also been good for me, going on 25 years with the corded version.
FYI the new brushless M12 rotary tool is about to come out.
I'm new to Dremels, but this thing has been great. ruclips.net/user/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.
i was looking for a comparison video review and finally got the best one. great work mate
Thanks!, I also released an updated video adding the new brushless m12.
Excellent review! One suggestion, if I may, to have a consistent force applied, you can stabilize the tool itself (or affix it to a base) and lower a rebar of the same weight onto it without applying additional pressure.
Great point! I will have to look at trying that next time.
Instantly subscribed from just this video, the professional science method of the reviewing is remarkable. Thank you.
Thanks!
I purchased both the Milwaukee m12 brushless rotary and the Dremel 8260 , I love them both , Thanks for the review
No problem, I just tested the m12 brushless and it's an animal.
Thank you for a great comparison. Yes, the 8260 uses Bosch brand green series (home and garden) 2 or 2.5 or 3 ah batteries. Dremel is also under warranty and service from the Bosch brand in Europe.
No problem! Thanks!
Interesting Dremel is under warranty from Bosch in Europe.
Thanks for the info!
Mate thank You heaps for your Video ... I didn't have to go for a Lengthy research to choose for the Best Cordless Rotary Tool... you are a Legend
Glad I could help, no problem!
Good review with useful information. My Milwaukee 2460-20 burnt out after a few minutea of moderate use while cutting some aluminum down spouts. Total time on the tool was only a couple of hours. Now it just flashes when I turn it on. Looking online I saw it is a common problem. Replaced the 2460-20 with a Dremel 8220 because I need a tool that is reliable. What does not make sense is how the 2460-20 can have so many four and five star reviews.
Thanks! Intersting I haven't had any issues with the 2460-20 yet, I wonder what the % of units are defective.
The 8220 seem like a good Dremel for the money.
@@Tools-Tested As near as I can tell the 2460 works fine up until it doesn't. The failures are usually instant, not gradual, and I do not know the percentage of these tools that fail within the warranty period. If the fault is a design flaw like inadequate heat-sinking then it could eventually affect 100% of the tools if they are used. Of course the term, 'defect", depends on the point of view. For tool owners anything that causes a premature failure is a "defect". For corporations anything that causes a catastrophic failure after the warranty has expired is a good way to increase sales. Search for "Phoebus Cartel" to see more information about premature product failures. It would be interesting to know how many people have experienced the 2460's four lights flashing three times and then dead failure.
I have the milwaukee and it's been great so far and having the m12 platform is what I think sets it a step above especially when you can put one of the bigger 12 volt batteries on it and it lasts forever
Yeah if you have the milwaukee platform it makes it a easy choice, it might have less power, but like you said endless options for battery's.
@@Tools-Tested Yea, but Bosch has tools that Milwaukee doesn't have at the moment. You want better runtime...just slap a 6.0 on the dremel.
@@ProxyFinal And Milwaukee has a lot more Bosch doesn't. What's your point?
@@moshet842
My point is clear. Does Milwaukee have a planer and palm router for 12v? The answer is No. I own them and I use them all the time and I also own a lot of M12s, but still no planer and palm router.
@@ProxyFinal I didn't know you were referring specifically to the 12v line. Overall, Milwaukee has more tools, but you're right they are kinda deficient in the 12v line. But again, they have the excellent 12v palm nailer no one else has.
I have had my M12 milwaukee dremal for almost a year now. The 2amp battery barely lasts through a small job. But you slap a 6amp on there and it's a whole different animal. I have the M12 3/8 ratchet to. Soon I'll be getting the long neck 3/8 as well.
Yeah that 6ah really wakes the rotary tool up!
Nice comparison. I ordered the 8220 for $89. I haven't got it yet. It comes with an accessory kit, battery and charger. The Milwaukee 2460-20 is $99 just for the tool. Another $52 for 2 batteries, $17 for a charger and no accessories. That makes the Dremel a much better deal.
Thanks, yep if you don’t already run the Milwaukee m12 line it can be expensive.
Overall the 8220 is a good value.
Thanks for taking the time to make this video. I have a Bauer from Harbor Freight and I don’t use it much. I charged it and tried to use it and it was dead. I think I will go to Home Depot and pick one out. Thanks, it was a interesting video.
No problem! FYI the new Milwaukee brushless 2525-20 should be out soon.
perfect review .. my first rotary tool was a drimel.. I been use them since 20 years ago.. and I still use them till now.. many brands came and go.. but the best stills on..
Yep they seem to keep improving, while keeping the same quality.
the thing is, the ppl buying the Milwaukee, most likely already have a supply of batteries rated up to 6AH, and are only paying the price of a skin-only product.
so in most ppl experience, the Milwaukee is going to have vast multiples of battery life over the other brands, AND they're going to be paying about 2/3s the price you listed. also, did you factor in the time it took you to change the disk on the Dremel when you applied way too much pressure (likely because the unit draws more power than is required to do the job efficiently) and destroyed an almost full wheel in a matter of seconds?
Thanks for the in-depth demo. All I can say is; you know your brand is the one to beat when the brand name becomes synonymous with the type of tool. So, “Dremel” is like “Kleenex!”
No problem! yep when the tool is called by the actual brand, thats the one to beat.
I was having a bad day, then saw this on the overhead and remembered that there was this brushless dremel I heard about. The fact that you showed Bosch batteries are finally compatible is a win for the brand and the consumer. The thing is a beast almost as if batteries nowadays are more powerful than corded tools. Even if Milwaukee announces a brushless rotary, I will stick with dremel/bosch and I will opt for the Ryobi 18v brushless rotary tool instead. I think Milwaukee really missed their chance. Good job, Bosch.
Thanks!, yep it’s about time with the battery, not a lot of options before.
I definitely was not impressed with the Milwaukee after the testing even though I thought it was going to place atleast second
I was already using the M12, but bought the 8260 on sale because I also have Bosch 12V tools for which I can make use of the 3Ahr battery (my other Bosch batteries are only 2Ahr)
I just got the Milwaukee M12 as a free tool with a charger/battery package from Home Depot. They have and online only deal right now you get a charger and two batteries with a free tool for $129.99.
I recently bought a HF Braun on sale for 39.99.
I've yet to recharge it, after much use. Much more powerful than my old cordless dremel tool.
Yeah its a good value IMO.
Good review. I have the M12 one, but haven't really put it through the ringer. Hoped it would do better, but like you said, I was getting into M12 overall so got this. But tool just by itself, Dremel is pretty nice.
Something for you and your viewers if you didn't know already, some Dremel accessories fit on the M12. I got the Dremel keyless chuck, and put it on the M12. Fits and works great.
Thanks! The M12 preforms a lot better with a 6.0ah battery.
Yep definitely a nice benefit it can use Dremel accessories.
Do you have a part number for the chuck
I have a corded knock off dremel thing, I have used it about 4 times in the ten or twelve years I’ve had it. Cost about £20 including loads of bits. Cost-benefit about right !
I was looking at the 8220 until I saw that you can use other batteries on the 8260. Both are very good tools but I went with the 8260 because of the brushless feature and the app. Great video and keep up the great work...thx
Yep both tested really well, I agree the Bosch battery's working in the 8260 is a big deal, and it being brushless.
Thanks! Will do
@Jadel Labradoodle251 Ah..nope, the 8260 is the first brushless Dremel and I believe the first brushless rotary tool on the market as of now
I was looking at the 8260 until this review. It performed significantly lower on the RPM. Is it possible it was limited by the RPM setting in the app?
@@thedave1602 it may be..but it works great for what I need it for.
The 8250 is brushless
Great review. Didn’t know about the 8260. Looks like a winner to me. Thanks.
Thanks! Yep it’s only been out for a few months.
Dude!! 8220 kept up with the more expensive ones...should've won 🏆 as the best budget dremel....2nd fastest charger, 2nd fastest rebar cutter, top 31rpm etc etc
Thanks! I was on the fence and this really helped me decide what to go with.
Glad I could help!
Milwaukee has since come out with a brushless version. The old version is now on sale at Home Depot for $99 with a 2.0ah battery and charger
Yeah the new brushless is crazy.
What a great video. Well tested and nice with diagrams in the video
Thanks, I just did a update video with 8240, 8250, Ryobi and Proxxon
Great review video! I've been debating between the Milwaukee and the Ryobi One rotary tools. Have you reviewed any of the Ryobi rotary tools?
Thanks, I have not done the 18 volt ryobi yet, only the 4V and 12V. I would defiantly by the Milwaukee over both of them.
@@Tools-Tested thanks for the reply! HD has recently been dropping the price on the M12 rotary kit (tool, battery, charger, and case) down to $79 but have missed it both times. Great deal at that price point.
While I love Dremel Products, I will probably go Milwaukee since I am already in the M12 family. Have you tried the Milwaukee with the higher amp battery? I wonder if that makes any difference?
Yeah the higher ah battery’s make a huge difference, see test video.
ruclips.net/video/MjmuRbTwCk8/видео.html
FYI Milwaukees brushless version is set to hit shelves this month 2525-20.
These came about from dental lab handpieces, like I used in the 80s. They were much smaller around, and more powerful, but costly.
Thanks for giving the country of manufacture. That matters, but I hope one day the USA will be back in that mix. It’s such a crying shame it’s not.
No problem, yep all we seem to do is import....
Thanks for the incredibly detailed review man!
Glad it was helpful!
Great Review as usual.. love your in depth analysis. I’m wondering if you put a CP2.0aAh or the HO2.5 battery on the M12 if the performance would have been better. Those 1.5Ah M12 batteries are pretty trash I only use them in my flashlight and Chalk Gun .. but I plan on getting the M12 version later on
Thanks, yeah I did an update video with 8240, 8250, Ryobi, Proxon. Just for fun I put a 6ah on the Milwaukee and wow did it ever wake up. I believe it actually did better then the 8260....
Hoping to do the M12 again with the 2.5 and 5.0 soon!
Great comparison, but one crucial test was missing- These tools’ ability to handle load under lower speeds.
Torque is crucial in most applications, as performance is often improved at lower speeds.
Yep currently working on an dyno, so hopefully soon we can see the torque vs rpm and also Watts.
Great review, it would be helpful if the warranty info was provided, esp since the Chicago Electric dropped & stopped working, I'm curious, would you be able to return for another?
Great suggestion, I was able to return it and they exchanged it no questions asked.
Thanks for making the video, great info. For my use, I'm leaning towards the 8220, but am going to continue to look around some more to see if anything else turns up.
No problem, FYI the 8240 is coming out this week. Looks like limited Lowes stores have them in stock. It’s $99 like 8220. All I know right now is it uses the Bosch battery like 8260 and soon 8250.
I ended up going with the Dremel 8250. I didn't need it wasn't Bluetooth on my rotary tool.. The first unit I bought was faulty. It wouldn't turn back on after it was turned off unless the battery was taken out and put back in. I returned it to Lowe's and didn't have much confidence in the tool, but the second one has been working like a champ. I absolutely LOVE this tool. Thanks again!
I wonder if you turned them all down to the 25000rpm the 8260 had would they be quieter and would have cut as quick
I use the Milwaukee m12 equipment and they make different amp hour batteries.
I am sure you can do better run times with a larger battery.
Yeah I tested it again with the 6ah and it actually outperformed the 8260. I posted a update showing the difference.
As someone who has bought several non Dremel (only to regret it) rotary tools over the last two decades this seems to have just about what I have been wanting for the last decade. easily replaceable battery, brushless motor and a significant amount of torque. I have it already on order.
Nice I really think you will like it.
@@Tools-Tested Been using the 8260 hard for the last week and it performs better than my 4200 (the worst Dremel I have bought, with it's one off never to be used again chuck that has too much run out and requires special collets) with the added benefit of wireless (although if you use it hard get an extra battery) Think I'm going to buy a Bosch fast charger for it. Overall I would say the best Dremel I have bought. Now I'm off to do some routing.
So glad I found this video. Wanted a good comparison of the two Dremels. Was debating if the extra $60 was worth it, and after watching this, I feel comfortable saying it is. Thank you! I run the 12V Milwaukee tools, but the warranty of the Dremel is what is kind of drawing me towards it, that and the brushless motor. Definitely feel like a brushless motor is a great advantage to something like this.
No problem! Yep I run the 12v Milwaukee and was wondering how it compared to the “Dremel brand” and was actually quite shocked. I thought it would have been at least better then the 8220…
It's not worth the extra money, but if you get it and you have older 8220 batteries they will work with the 8260 but it requires forcing them in. From the outside they look almost identical but somewhere theres a difference that makes it difficult to force in. But I'd suggest getting the 8220 and a Versa and have $10 left over, I think you can even get the 8220 for $75.
Best review ever! I wish you could do this with corded too. Like Dremel 4300 vs 8260. Thanks.
Thanks! hopefully at some point I will also do corded.
You should check out the German made Proxxon rotary tools.
I will have to check them out, never heard of them. Thanks for the info!
Thanks for the video. I've always bought Dremel brand rotary tools, but I also own multiple Milwaukee 18v/12v tools and have 12v batteries from 1.5Ah to 4.0Ah so I thought what the heck. I bought the Milwaukee a while back and I have to say, It's probably the most disappointing Milwaukee tool I own. It's wimpy, loud, and vibrates like crazy. The loudness and vibration come from the poor quality and lack of precision. The exact same bit that runs smooth as glass in a Dremel, vibrates like hell in the Milwaukee. There is no comparison in quality between the two. I came here to find a comparison of the two Dremel's and I think I'm going to spend the extra and get the 8260. (Edit: I may get the 8250 as it's $20 cheaper and I have no plans of using the Bluetooth and couldn't care less about a lit up LED logo).
No problem! I will say the M12 seems to have a lot more power with the XC6.0 in my testing which is interesting.
Yeah defiantly the 8250 over the 8260, I just wish the 8250 and 8260 could use the larger Bosch battery with the base (4ah+), sadly the base hits the tail on the tool.
The Dremel can charger faster if you use a bosch 12v charger too!
You are like Todd from @ProjectFarm but without all that caffine. He talks so fast but i love it. Great channel
Thanks!, yeah this was one of my first test videos. I have speed things up some since then.
Realistically, what can one expect in terms of battery life for the Dremel 8220 vs 8260? From your experience in heavy continuous use and occasional bursts/tasks? Maybe if you were to make a test for this, maybe keep them running non-stop with some "heavier" bit common to all and at least have a relative idea. Thank you!
They claim 2x the 8220. That being said the 8260 also comes with a 3ah vs the 8220 @ 2ah. Looking at the no load run time you can defiantly see a difference.
Im hoping to build a dyno so I can actually get run time and load more accurately.
But I would expect like they claim, almost double due to the battery and brushless motor.
Bought a Dremel 8220 in 2012 here in Canada... Used it a few times, was disappointed with the battery life, wasn't sure if it was the battery that was a dud or just normal(cost of oem batteries wasn't looking like a viable option to find out and availability was also an issue), was about to just accept the idea it was a bad purchase but took a shot at buying 3rd party Shentech(personally believe it was luck of the draw) branded batteries off amazon and those had about 3 times the battery life, completely changed the usability of the dremel for me..... ** there's these generic 1-1/2in(1/8 shank) grinder wheel attachments that can be purchased that are a great combo with it, used it to cut part of my muffler pipe off, far better than the oem dremel grinder cut off wheels:)
The max RPM on the 8260 only goes up to 30k when the battery is sufficiently charged. I just bought one and noticed there was no difference between 25k and 30k. The battery was low so I charged it, and the 30k stepped up to a higher speed. Maybe your battery wasn’t fully charged when you did the RPM test?
Interesting, I thought it was fully charged but I guess that's a possibility.
Thanks for the info!
Harbor Freight has one from Bauer now. $50. I'll give it a shot. I only need to cut lite wood and cardboard.
Already tested it ruclips.net/video/zLmcOzoU-qU/видео.html good value for the money in my option.
Can you review aftermarket 8220 batteries please?
Nice day. If there's a manufacturing defect, or something (dremel 8260) with rpm's ? Is there anyone here who has a similar situation with this tool ?
lol your previous generation Dremel is so much nicer then my cordless Dremel, not to mention how much nicer still the newest version is. I believe my cordless Dremel may be the very first generation of lithium powered cordless Dremel. Still works and serves me quite well honestly.
Nice!
Hello! I don’t see where you’ve made a video of the best rotary sander. Am I missing it? If not, I’d sure like to see your opinion on this!
Hello I haven't yet, I know Project Farm did a video on them I believe about a month ago.
So for the dremel 8260 did you connect to it via Bluetooth to max out rpms to full power? Since apparently everything is Bluetooth now
Yeah it was connected, Kinda strange. Hope to retest it later in the year. Once I get a dyno built for rotary tools.
Great comparison. Thanks!
Thanks! No problem!
Regarding the cutting disc the Milwaukee brand cut faster and last 3 times longer,downside is the screw to attach it to the tool.
Interesting, yeah I do like that easy change disk. Looks like ryobi has a version now, I’m curious how they compare.
Such a pity they still don't have the 8260 standalone available anywhere.
Yeah really is a shame.
@@Tools-Tested Also, they don't have the 8250 (same device, but without BT) available in Europe at all.
I’ve had multiple Dremels
All failed with in 6 hours to half hour. Never will I but them again. Try a longevity test you will find out. IMO
I have a couple of Milwaukee M 12 and M 18 tools so I will be buying Milwaukee Rotary tool
Its nice to see you can use Bosch battery's in the 8260, but Milwaukee offers more tools then Bosch.
man REALLY curious what the deal was with RPM that HUGE ding.
Useful test, but I was hoping you'd be doing some torque testing. Two things disappointed me about my current 8220. First the plastic accessory mounting screw thread quickly got stripped making some of the accessories useless and second the torque is really poor at slow speeds meaning I often have to run at higher than ideal speed just to prevent stalling. The torque issue should theoretically be improved with a brushless motor. This would explain why the 8260 cuts the rebar faster despite slower maximum speed, but also throws shade on your maximum speed measurement. If the brushed motor machines immediately slow down when loaded, the no-load maximum speed is pretty irrelevant! Even some subjective tests of torque at low speeds would be useful. Also at the 8260 price point I would hope for a die-cast metal nose end to strengthen the mounting screw and stiffen the bearing mount to take side-loads better. From your pictures, it looks like it is still plastic, but maybe better quality plastic than the 8220?
Spot on. I don’t own Milwaukee anything(DeWalt/FLEX/Makita), still I’m considering the Milwaukee simply for the useful torque. I’ve seen them handle load very well.
@@WontSeeReplies Yes, since this I have replaced my 8220 with an 8260. I would have considered other brands as the 8260 is rather over-priced, but I had a lot of Dremel accessories which would have had to be replaced. The 8260 does have a plastic nose, but it seems to be better quality plastic, or maybe I just know to be more careful! It does however meet my expectation of much better low speed torque (and the speed is maintained much better as it is loaded). Strangely Dremel does not really emphasise this benefit, implying it is just a maintenance thing (no brushes to wear out). I only knew to expect this because I am an EE who knows the theory!
Bought the dremel 8250 for the brushless motor and bosch battery, the switch failed on the first day. Lifetime warranty is bogus, dremel says if the tool is defective it will fail in the first few months. If the tool fails after years of use it's not defective, it will be considered wear and tear therefore it won't be covered under warranty. Good luck
That's crazy, its really hard for me to trust manufactures warranty's nowadays.
I back up milwaukee any time.all my tools are milwaukee for life the best tools.
So, now that you have both the 8220 & 8260, which one would you advice I go for & why? being my first dremel tool and yes, I'll be cutting, polishing & the whole 9.
I would say the 8220, yes the 8260 has about 20% more power but here its currently almost double the price vs 8220. To me its no worth the extra money, and the 8220 was Dremel's top cordless unit for 10 years.
@@Tools-Tested What does it come in?
the 8220 comes in a platinium package here with a proper toploader box with drawers in the front here in Europe, 1 charger, 2 batteries, 5 attachments and 56 accessories for $170
Now, what do you get in the 8260 package and for how much $?
8220 is $99 here and comes with 30 piece accessory kit.
8260 is $169 and comes with 5 accessories.
Both only have one battery
@@Tools-Tested Accessories are drill bits, cutting discs mandrels, sanding drums etc, but you forgot to mention how many attachments do they come with? attachments like straight-line and circle cutter, router etc, you know what I mean?
I really think that the 8260 is the best option but when I made the search the model isn’t available in Mexico 🤦🏻♂️ the damn tool is made in Mexico but isn’t available! Only the 8220 and the Milwaukee, what’s the best option of this two?
That’s crazy, made there and isn’t available….
Right now if you don’t plan on owning other Milwaukee m12 tools go with the 8220.
BUT I did just learn yesterday they are releasing a 8240 and a 8250 so if you can wait it might be worth it. Both use the new Bosch battery.
This is greatness! Thank you!
No problem!
The Milwaukee cutting wheels last up to 4 times longer than Dremel the downside is Milwaukee doesn't have the ez lock.
Interesting I will have to test that, Thanks for the info. Do you think they are the same as Ryobi? seeing TTI also owns them, they did just release a similar easy lock.
@@Tools-Tested I've tried only those 2. I had 6 cutting wheels 2 Milwaukee and 4 Dremel for a quick job using first the Milwaukee which cut half of it and I barely finished with the Dremel 🥺 I started to panic when I noticed the Dremel wheels durability.
The 8260 comes standard in the app set at 2500 , you must go in the app and select the higher speed.
Great comparison. Was wondering if the Waukee was any good.
Thanks, I personally thought it was going to do better, but if your running M12 you can't go wrong!
The Milwaukee has the option of a 6 amp hour battery.
Yeah I tested it in a updated video, and it lead to huge gains in performance.
Can i ask. I've a cheaper black & decker one. and she vibrates enough to bounce off.
As far as smoothness of operation when you trying to sand delicate areas, or engrave etc. are all of these products on par?
Yeah they all have a good amount of vibration at high RPMs, only real alternative is to mount the tool and use a extension or something like the Ryobi power station amzn.to/3EKIHNE
@@Tools-Tested Thanks for the helpful advice. I will look into what you suggested.
Will a Bosch battery fit a Dremel 8240 or only the 8260?
Yeah it now works in 8240 8250 and 8260, Note thought the larger battery's (6ah) with the base only fit the 8240. The base hits on the 50 and 60 and won't go all the way in,
@@Tools-Tested Thank you for your quick reply. Your videos are very helpful and well done! Keep it up.
Sadly I think my 8220 bit the dust today...it no longer turns on even on a full charge, frequently have to pull the battery out and reseat it multiple times before it works. Wonder if I should just jump ship and get the m12 as I already have an m12 screwdriver with a pair of batteries. Faster charger too (30 minutes compared to 90, readily available spare batteries)
Seeing you have m12 already its worth a shot in my book. I will say if you have the higher AH m12 battery's they also help in performance of the rotary tool.
I’m stuck between the 8220 and Milwaukee because I have the m18 line but that 8220 has more punch and comes with way more attachments for the $
I know the 8220 comes with more attachments, but the battery basically only works with the tool.
I did more testing with the M12 and found with a 6ah battery it performs better then the 8220.
HomeDepot currently has a decent deal on a kit www.homedepot.com/p/Milwaukee-M12-12V-Lithium-Ion-Cordless-Rotary-Tool-with-One-M12-4-0-Ah-and-One-M12-2-0-Ah-Battery-Pack-and-Charger-48-59-2424-2460-20/317064263
At least with the m12 you can use the battery’s in other m12 tools if you want to expand and use the m18 charger.
I own 2 of the 8220 models (1 still in the case). I also own the M12 system but not the "dremel" (needed for a job so purchased what was available). I wish that batteries were for the 8220 were easily available.
Yep that’s really the only drawback I see to the 8220, but at least they did fix that on the 8260.
You can actually hack the bosch 3.0 batteries to fit the 8220, but that's as far as you can go as far as runtime goes.
hi. could i use the 8220 dremel to cut a hole for a vanity bahroom sink in a laminate countertop???
the RPM might be limited to reduce wear on the bearings and dremel tools. If you watch recently youtube studies about abrasives, people determined a HUGE difference in run time with different cutting tools at low and high speeds. I think you sold me on the 8260, the milwakee is too loud and I feel like after two years its starting to get balance problems with the spindle. I have been waiting for a brushless one for a long time.
May be worth pointing out the 8260 has a "limited lifetime" warranty (the 8220 has a 2 year warranty).
Yes that's a good point! Thanks!
Watching this still have to go with the m12 because it’s still one charger I have to have and I have like 40 of those batteries. So I can run all day as with dremel I will have to buy all new batteries and have more chargers then I already have
Understandable, I did find in later test the higher AH battery's give this tool a massive boost in performance.
@@Tools-Tested I have. A bunch of m12-18 batteries I’m a contractor so I have a lot of tools.
@@Clemson-rc2yq Yep I think Dremel is more for hobbyists, batteries are hard to come by and are $$$ compared to Milwaukee.
Really like to see Milwaukee release a brushless version.
@@Tools-Tested yes they need to. I just ordered one
Very valuable, thank you sir!
No problem!
Does it hold 3/32 collet?
Yes you can buy a collet set amzn.to/3UyKNYb
Excellent review!
Thanks!
the rpm on the dremmel increases when the load is increased to save battery life
The 8260 had a 12v 3ah battery while the Milwaukee had a 12v 1.5ah battery?? In what world is a tool with DOUBLE the amperage a fair test?!?
The m12 is great
I am surprised that you did not include the Bosch.
The Bosch version is not very common in the US, only place I can order it is from Amazon coming from the UK.
Well played. I was going to go with Milwaukee, but since creme decide to shsre battery with Bosch, I already have batteries. Dremel sells more rotary tools than Milwaukee.
Not sure who or why anyone would want chsnge rpm Bluetooth app. But ever since they legalized the grass, things have been just getting more awkward.
Thank you.
No problem, I will say the Milwaukee performance is a lot better with a 6ah battery.
I did a updated video with the new 8240 and 8250.
Yep really don’t understand the blue tooth…
I'm going with the 8220 when I get the money. hands down the best on the Market so far. also the only rotor tool of the type that has a brushless motor! this is key
You might want to wait, Lowes is currently getting the new 8240 in stock this week. Don't know much about it yet, other then it is priced the same as the 8220 but uses the new Bosch battery's like the 8260.
The 8220 has a brushed motor, that's not as serviceable as the older Dremel's with brushes.
8260 is the only brushless, soon there will also be a 8250 which is 10 dollars cheaper without the Bluetooth.
@@Tools-Tested I meant the 8260 my bad
Good point though thanks
The problem with dremel is the bit changing hold button
Much better to buy a flex shaft rotary tool from Foredom or the much cheaper but still good quality Winsa.
You shoulda used a bigger battery with the Milwaukee
I did in later videos, and the performance boost was impressive.
What is a nickel clad battery
using nickel oxide hydroxide and metallic cadmium as electrodes, they were used before Lithium. Charge times are typically higher and the amount of cycles you get before the battery starts to deteriorate is less then Lithium.
My dremel sucks , keeps on dying and stops working while using it hard , I have to shut it off and restart it constantly … also it takes 1 hour to 2 to charge … sucks big time …
Buying the Milwaukee next cause I’m on the platform ..
I retested the Milwaukee with the 6ah battery and it outperformed the 8260.
@@Tools-Tested
Cool, thks ….I have all those battery’s also .
dremel makes the best dremel. who wouldve thought. am a bit surprised that the milwaukee didnt do better. maybe with the 2.5 ho?
So with the 5.0 HO the brushed Milwaukee will beat the 8260 see video ruclips.net/video/MjmuRbTwCk8/видео.html
Because of the design the 8260 cant run the 4 and 6ah batterys sadly.
Hopefully in a few weeks im going to dyno them against the new brushless Milwaukee.
Why the milawakee charger gotta be so big