DIY Hand Palm Sander from 2x4 Wood (EASY Wood Working Tool Project)
HTML-код
- Опубликовано: 8 сен 2024
- In this video, learn how to create your own Hand Palm Sander using a simple scrap 2x4 wood plank and a bolt in an easy step-by-step guide. This DIY project is perfect for anyone looking to save a buck. Watch now and start sanding with your homemade sander!
Materials:
-2x4
-Bolt and Nut
-Sand Paper
Steps:
1.Cut your 2 by 4 to its desired palm sander length
2.Drill bolt hole in the center of the 2x4
3.Drill a hole big enough to make the bolt head sit flush
4.Cut a thin piece of 2x4
5.Drill center of the thin piece
6.Cut Sand paper
7.Fold sand paper over top of the 2x4 plank and sandwich under the thin piece
8. Tighten bolt
I like it, though personally I have the habit of sanding really vigorously, so I probably would've made some tweaks holding the sandpaper in place more tightly.
Hi Pherioxus thanks for the comment! I have the same issue sometimes when I put too much pressure the sides can slip out. However, I am enough of a hoarder to have extra scraps that I don't care about driving some wood screws through (short enough not to poke out the other end) and really fasten it down.