What accessories do you really need with the Bambu Lab X1C and P1P?
HTML-код
- Опубликовано: 24 авг 2024
- Review of the available accessories for the Bambu Lab X1C and P1P
What I recommend you buy with the printer:
3 pack thermistors
3 pack ceramic heaters
Extruder bundle or
extra nozzle and hardened steel extruder
/ lendizzleprintz
Support the channel and buy a shirt:
www.lendizzlepr...
Maker Space Stuff:
Sewing/ Cutting Mat- amzn.to/3najNkv
Steel Rulers- amzn.to/3K89Ddn
Digital Caliper- amzn.to/40CyF9I
Nut Drivers- amzn.to/3LVb2oP
Hex driver- amzn.to/3zcuJkg
Tekton Screwdriver set- amzn.to/3FNfhiv
Sharpie - amzn.to/3ZUg4Fv
Filament I recommend:
eSUN PLA+ Filament - amzn.to/41YCnMl
Paramount PLA - amzn.to/3JuyfLI
Video Equipment:
Canon EOS R7 - amzn.to/40iHuFQ
Canon M50 - amzn.to/3ZUJKmx
Canon EOS R7 RF-S18-150mm F3.5-6.3 - amzn.to/3T3BKx3
Canon RF50mm F1.8 STM - amzn.to/3T0Shlj
Canon EF-S 24mm - amzn.to/3FwTtHR
SmallRig Cage Canon EOS R7 - amzn.to/3JNLAQA
SmallRig Cage Canon M50 - amzn.to/3LxfXMH
Label Maker:
Brother P-Touch Cube Smartphone Label Maker - amzn.to/3l3Q5gD
Refill - amzn.to/3JLUdvc
Lights:
Octagon Softbox - amzn.to/3YQB7Iw
As an Amazon Associate, I earn from qualifying purchases.
You forgot one thing: Tubing. According to Bambu Wiki maintenance they wear down, and they recommend checking the tubes after 10 kg print and 5 kg, if you use abrasive filament. You don't want more wear than necessary, it's not difficult to figure out where the dust and debris ends up.
They sent so much of that with the AMS I didn’t even think about that. Good point though.
@@lendizzle77 I have written to Stefan on CNC Kitchen. He is very good at testing things. It would be nice to know if there are different qualities of tubing. Hope he will/can test it.
Nice
Yes. I have had to replace all the PTF tubing inside the AMS. In some places the tubing was completely worn through. Mostly right after feeding in the AMS at the First Stage Feeder
@@andrewwoulfe6579 Was it easy to see the wear? Could you see light wear also?
Im amazed that nothing has broken in the last 400 hours of printing on my p1p. Thats like 2,000 hours of printing on my ender 3, which is equal to 200 repairs lmao
Hahahaha. So true
I thought I was going deaf on my left ear... Turns out your video only outputs right audio :) Great content nonetheless.
Sorry about that
audio is only right side
Another great video.
I also found if you are using the AMS the AMS Feeding Funnel is a point of failure in the AMS First Stage Feeder. You will know you have a problem if you are having trouble feeding filament into the AMS and getting a red light.
Just got a P1P last week to go with my X! Carbon. I will keep you up with my progress with the new printer.
Thanks for all you do
Thanks for the info!
Soooo, the X1C comes with some sample PLA-CF, but their stat sheet for it says you probably shouldn't use it with a nozzle smaller than 0.6mm. But the X1C only ships with 0.4mm nozzles. Which means 1/3 of the filament they include with the printer shouldn't be used with the printer out of the box. I've had it less than 24 hours and already buying new nozzles. It sounds like I'm unhappy but I'm really not, this thing is amazing and I'm happy I don't have to educate myself on the entire universe of new 0.6mm nozzles, I just buy theirs
It works with .4. All the benchys I printed with CF was with the .4. I wouldn’t recommend long term but if you just want to print the test spool, you should be alright
lol you're the victim of the marketing department. Just wait until you reach the "I need a storage space for this filament" stage.
This apply for the A1 with AMS lite?
It would be nice if you had a pinned item list of the parts you recommend buying with the X1c
It won't let me save a cart and share. I put a list in the description.
@@lendizzle77 Thank you 🙂
Very usefull information!
How does the printer do with switching between high temp materials like nylons, and low temp materials like pla? Is there a risk of high temp material leftover in the nozzle causing issues when trying to print low temp materials afterwards? Should you have a specific hot end for each?
Thanks LD. 👊🏽👽👍🏽 Been having a real struggle with PETG and the X1C. Any suggestions?
Its my go-to filament, no issues here. Whats the problem?
@@akren2482 - I can’t get the first layer to stay down. Using the PETG compatible side of the sheet and the standard X1C PETG settings in slicer. Doing all the pre print calibrations… I have never ran PETG in general, even with other printers, so I don’t know any of the nuances with it. I gave up pretty quick 😅 (within an hour) I saw a random blurb today print speeds for PETG need to be reduced and I was going to try fiddling more with those settings when I give it a go again. Every PLA print on X1C is very good to excellent. Any input is appreciated.
PS, I always run in standard mode to begin with…
Interesting. I have had the opposite problem. If you notice the scaring on the Wham Bam plate from the last video, it's from PETG. What brand of filament? Have you tried different brands?
@@lendizzle77 - It was a brand new sealed Overture black PETG. I’ve had great luck with their PLA, so I went for it. Haven’t tried any other brands yet. Perhaps I will do a little reading and try a couple other recommended brands. I would have guessed my WhamBam plate would have arrived yesterday, but now USPS says “Running late, moving through network”. Whatever that means. 🤣
Thank you for the video.
Is it possible to replace the hotends with brands other than Bamboo Labs? Perhaps the DyzeDesign.
I apologize if this is a basic question, but I'm not familiar with the process. Thanks
I haven’t tried but am looking in to them
@@lendizzle77 Great! I've been trying to reach out to them, but it seems like they're missing in action. Thank you for sharing the amazing video, and please continue to produce more content like this.
I remember seeing that the wiper is printable so that may be a pointless purchase imo.
I need that mousepad
where's the audio??????
what base plates do you recommend buying with the machine?
I have a ton of plates but really only use the cool plate it came with and the high temp plate. I rarely use the textured plate or the wham bam plate.
There is no sound in the video at all
What’s happened to the audio? Mono and not very clear
Really? I viewed on a few computers and my phone. Working great for me. Anyone else having audio issues?
Audio is fine 👍
Thanks for the feedback. I think I found the issue and have fixed it. Will re-render and upload again tonight
@@lendizzle77 Yes, only getting audio out of the right channel. I've confirmed it's an issue unique to this video. Others are fine, but not this one
Yeah. Sorry about that.
Good bless you
Thanks for watching!
Your microphone is mono right ear, center it
I think I found the issue and have fixed it. Will re-render and upload again tonight. Thanks for the feedback.
Man, what’s wrong ?!? All these replacements and 3packs … 🤯
I made more than 1500 hours of print in 4 years on my old Prusa and only one cable to table connection broke twice.
But what you say say confirm that bamboo printers are terrible quality.