Видео

thats not a sale its still 205 for the bundle scam

With the panda branch can i connect two ams lite to bambulab a1 mini????

its 10 a roll on aliexpress....

I got a bag of tea lights at the thift store for $2... ~ 40

no link to the sale

it didnt work for me

I just bought 2 4-packs of sunlu pla for a project, I’ll need more too, let’s have it!

I use to print on A1 mini and I had better results with 0.6 nozzle, because is more difficult to get a clogged nozzle, but the 0.4 gives better resolution.

Thank You for taking time to show this video! I would never figure this out without your video. Very interesting.

do the spools fit in the bambu amx?

yeah look, i love seeing baboons with full mask and hazmat suit for abs lol - look, if you had a pipe direct from the exhaust to your face, different story.

Thanks for the honest and well detailed review! I may have missed a note, but I was curious how long something like this would or should last? Can you only print once in a single area?

5:42 gas convection oven?

Just got my X1-c yesterday. I ran across your video to set up the camera to play on full screen. Thanks a whole bunch. You're right. It's a bit complicated for the novice computer user, but us command line folks found your explanation EXCELLENT. Again Thanks Yes, it works....The download was a newer version (7..1) but all works ok

What will happen if I use the ams? I’m asking because there is a support material made for PET-CF how am I going to use the support that is in the AMS and the PET-CF is on the spool holder?? This is quite confusing

The p1S comes with a filter box at the rear, so would it be necessary to do the bento box?

I've got an air fryer that goes down to 200 Fahrenheit. Think that will work?

Been fighting ASA Aero for over a week now. Bought for RC plane but cannot get consistent results with any settings. Do you have a trouble shooting help?

I have tried everything and it still doesn't work

Couldn't you have stacked the spools on top of each other to do both in the same 8h? Or is that no recommended? I'm brand new, just looking into buying the Bambu Lab X1C and am watching your videos to learn what I'll need.

Take a very small sewing needle, and poke the bubble. Then put it on the heat bed and work it out. I did the A1 mini last night and had zero issues aside from the Official Bambu jig file being incorrectly designed. Someone did a remix to fix it, but I didn't see it until after the stickers went on.

Sorry i missed this one. Nice prints happening out there👍

I’m using a generic flexible steel plate I got online somewhere. It used to have a self-adhesive PEI sheet on it (which worked great). After that PEI layer finally wore out, I just peeled it off, cleaned the adhesive goo off of it, sanded the steel plate with 400 grit sandpaper, sprayed it with hair spray and gave that a shot. I’ve used that ever since. I’ll never use anything else again. I usually have to wash the plate and reapply hair spray once every 20 or 30 prints…give or take.

@LenDizzleI I just got my panda branch, today and it got me thinking would it allowed you to run more then 4 AMS systems?

Would be nice if the AMS was able to function as a dry box

I ordered both and they told me they’re getting the smooth one in on the 17th, so just waiting for them to ship it. I got the smooth one specifically for all my PA prints. Also got the fan duct for my X1C. Supposedly it works a little better than the stock one. I only got the lower part, not the entire assembly.

are these plates that much better than the original plate that came with the A1 that justifies spending another $25?

The cryo grip frostbite is amazing. I have it on all my printers. And I have a set of glacier on order. I’m super excited for those and the houndstooth. 😅

Would like to see 45 degree PETG test

any opinion about Darkmoon ICE ? It's also low temp printing but it supports most materials.

This stuff is awesome. Goes on sale for $100. I used an old air fryer and worked great.

Gotta echo the "Creality" junk comment... I had a couple of them and they are machine for tweakers that really have no understanding of 3d printing and want to learn the ins/outs and make replacement parts for their printer... About all I got out of a couple of them.. Bambu X1 Carbon?? I have killed one or 2 prints is all... A printer for the masses...

I don't get the point of those Glacier Plates. What's the benefit in lowering the temperature?

The link for the Start/Stop Gcodes are no longer working. Page not found on Printables.

Would have loved to see these build plates tested with other materials.

I remember when the X1C was delivered to me from the kickstarter, it came with a cool plate and I could print pla and petg with it with less than 30c on the bed. I loved that plate. But nobody liked it, so Bambu quit selling the replacement stickers. Now BIQU releases the cryo plates and people are raving over it.

I am missing the 45 degree test with honeycomb plates. In my experience similar types have weak bed adhesion.

I’ve got the honeycomb one and it leaves the surface way too shinny and uneven surface finish like it’s dirty. I also have to bump up the bed temp 5-10deg to make it stick. The plate looks awesome but not print doesn’t.

i get this help sdp @ 000002dae78d55c0] Could not find codec parameters for stream 0 (Video: h264, none): unspecified size Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options Input #0, sdp, from 'ffmpeg.sdp': Metadata: title : No Name Duration: N/A, bitrate: N/A Stream #0:0: Video: h264, none, 90k tbr, 90k tbn nan M-V: nan fd= 0 aq= 0KB vq= 0KB sq= 0B

Not sure if you get affiliate money but used your link got both the frostbite and glacier well one was preorder and got the honeycomb also

I have the honeycomb build plate and every print is failing. Nothing want to stick to it. Which settings do you use?

Being new to 3d printing I absolutely needed this video, I havent done any customizing to infills yet and I started a 22 hour print of a leon kennedy figure thats about a foot tall using a .2mm nozzle and i walked away, its almost done and i just noticed its completely hollow because for some reason my infill was default to lightning T_T removing this supports is going to be terrifying

That was a terrible print, tons of warping.

Hi, I am trying to print PAHT-CF -15 with Bambu Lab X1E, but it leaks (oozing) from the nozzle during printing or when the nozzle is not moving. Although the filament pusher motor is not working, it is self-flowing under 260 C.The nozzle I use is 0.6mm.Can you suggest something about this? I reduced the flow rates, but that didn't work.

All these videos and I can't seem to find one with applying thermal grease?? Is it not necessary? Just bought a P1P and I have no clue why it was included, I can't find how and where to apply it properly.. just articles saying to put it on the thermoster and heat block but it doesn't seem right..

These are not difficult to do in the slightest. If anyone is hesitant, don't be.

21:39 big oof

Can PVA be run thru a .2mm nozzle?

Ernest Expressway

im bambu studio you can add primitives (cubes,spheres etc etc )