Tear down of the fantastic G305 Wireless mouse, in 4K. Join the Discord: / discord No added music Real time If you have any ideas for new videos, please comment below!
Thanks! I couldn't figure out the correct placement of that little spring on the clicky side of the mouse wheel and it was driving me nuts until I came across this.
Thank you SO MUCH. You're doing a service to all of us who want to mod or repair our mouse. This is the best kind of documentation and reference. Cheers!
Thank you, I was able to replace both of my double clicking switches. The disassembly was very tricky, but once you learn the methods, it's much easier.
@@siwiutki1987 Any new mouse switch will do, in fact, I have used smaller silent switches and they are perfectly working right now. I got a silent, properly working G305, it's amazing. www.aliexpress.com/item/32756151300.html?spm=a2g0s.9042311.0.0.27424c4d0JKMlx
@@siwiutki1987 Those are the silent switches, you can buy them from stores close by, not necessarily specific to the seller. Basic components really. The switches you bought will do as well, whichever fits your needs. I was happy with the original switches but how can both die on me, sadness. Had to replace. Worth it.
@@ChargedPulsar Well i bought new G305 today coz my old one after cleaning it lasted 3 days without double click, now im waiting for switches also gona get some grip tapes and new sliders, and if everything gona go smoothly my sister would get almost new mouse and i will keep moded one.
For anyone who first time attempting to disassemble their mouse, I highly suggest that you use something sharp to take off the mouse skates. Don't peel it by your nail or you will ruin it.
overall good tutorial but tips for anyone doing this -when taking out the wires of the mouse buttons dont just yank they might be glued in and will remove the isolation like mine -if you want to remove the thumb mouse buttons there are 2 more screws inside the little hole where the switches were -the latch at the beginning you want to push the plastic instead of the latch
@@ilhambintang7547 ionno honestly could try hair dryer to loosen up but if that don't work go in with a scalpel and sacrifice a little bit of the side isolation just be careful it's thin asf
The right click of my G305 was not working properly. I fixed it disconnecting it from the board and connecting it again. Sadly, after removing the mouse feet in order to access the screws you will have worse gliding experience, since it gets a little bit damaged.
Hey so I have this mouse and one of my mouse buttons just propped up and theres a lot of distance between it and the base of the mouse, making my cps lower. any way I can get the button back to it's normal height?
What is the size of the screwdriver for the pcb screws and the ones that hold the mouse clicks? I started to open it but I could only remove the first 4 that are under the sliders and the others were smaller and I want to know the size to buy a screwdriver. Thank you
My scroll wheel keeps activating randomly. I used a can of air and that worked for a while. Is it possible I tear this down and find dirt/hair and remove it I'm good? Sigh. Annoying cause I've only had it a couple months.
The tucked in cables from the clicks were the enemy on my model. Literally had to bend the plastic a bit because the cables were tucked so tightly into it and I didnt wanna damage the cables
For people who have issues with clicking and dragging (e.g. icons dropping while the button is technically still clicked), if cleaning doesn't help try lowering the report rate in Logitech's Gaming Software to 250 even 125.
The mouse is very good overall. However, both of my switches are double clicking now and I have to replace them. I wasn't expecting this. Also I had to modify the chasis to suit my hand better, it's slippery on the long run. Old g7 mouses had better shape.
wish anyone could help. i lost my dongle a couple of years back, was wondering if theres a replacement for its pvc chip that comes with its own receiver ? i tried contacting logi support but unfortunately they cant provide any replacement since the dongle is unique only to its unit. or make it wired i guess i dont mind so just i could use it again as a back up mouse. i was really hoping to encounter a thread where they discuss this nerdy mod.
@@bosiorne2292 G304/G305 ? i already contacted them and sent the details but unfortunately they can't ship here in the Philippines. theres also a similar case but they were sent a new unit instead, i dont think another dongle would work
Guys unless it's broken and you're trying to fix it, don't tear it down. It literally requires too much force to open and will never be put back together again as it's brand new. I opened it to do some stupid mod i found on reddit and now i turned it to a squeaky mess even if i undo the mod (before this process mouse was feeling rock solid). The screws and the shell are tightened with a special force in factory. And if you try to open it the risk of messing up it's tightness is almost inevitable and probably every part of it will start to squeak or crack. Now i'm just waiting for my mouse to die so i can get a new one cause i can't enjoy using it anymore, it's so squeaky.
this is great. have opened my G304 about 3-5 times but haven't remove the battery area part. I'm currently having a problem where the mouse turns off sometimes, especially if you bumped it a little hard (on the keyboard or the desk itself). Upon checking, trying to move the battery while mouse is on, it sometimes turns off. So a little electrical problem? I would have to check the wirings. Hopefully something that can be fixed without re-soldering because I don't have the tools. If you have any suggestion, I would appreciate it. :)
You can find cheap solder kits with everything you need, I can assure you, it's worth buying. You never know when you need them, but when you do you'll be happy you bought them !
try scrubbing some vinegar+baking soda on the contacts with a cotton swab first. it will eat off any corrosion which could be causing the battery to become unreliable. if the battery feels loose, put some tin toil at the end of the slot to make up for the space
Helped me a lot, but I should had watched whole vid before taking down my mouse lol Didn't realize the battery housing can also be torn down, which makes it way easier accessing the micro switch.
thanks. I tried to do the triple a battery mod with the tin foil and a small piece of tinfoil got inside the mouse and has been rattling inside. better now
they are original from my observation. if you're gonna replace them, get some kalih switches instead of garbage omrons, and all you need to do is desolder the old one and put the new one on. but if you're gonna do one switch, it can't hurt to do them all so you don't have to do it for a long time.
У кого дабл клик или "недоклик" приклейте что-нибудь к кнопкам мыши с обратной стороны, к той выпуклости с которая касается кликера, я наклеил пару слоев наклеек 4x4 мм, мне помогло, старая накладка прогнулась в месте соприкосновения с кликером.
fun fact on expensive mouse dpi change button is flat to buttons. any other mouse this shit sticks out 2 fuckin meters. thx logitech. i must disassemble mouse and cut that shit down
this is propably my fav unintentional ASMR video
Legend says that screw still bounces till this day
ure a legend too and we got the same name lol
Thanks! I couldn't figure out the correct placement of that little spring on the clicky side of the mouse wheel and it was driving me nuts until I came across this.
That's the reason why the middle click is so mushy
Thank you SO MUCH. You're doing a service to all of us who want to mod or repair our mouse. This is the best kind of documentation and reference. Cheers!
Thank you, I was able to replace both of my double clicking switches. The disassembly was very tricky, but once you learn the methods, it's much easier.
Hey where did you recived new switches ? Coz i cleaned mine and they are working right now but next time i think it wont be so easy :)
@@siwiutki1987 Any new mouse switch will do, in fact, I have used smaller silent switches and they are perfectly working right now. I got a silent, properly working G305, it's amazing.
www.aliexpress.com/item/32756151300.html?spm=a2g0s.9042311.0.0.27424c4d0JKMlx
@@ChargedPulsar Ty for answer i already ordered Huano Blue/Blue coz i was looking for something stiffer not hairtriggering 50days till delivery :)
@@siwiutki1987 Those are the silent switches, you can buy them from stores close by, not necessarily specific to the seller. Basic components really. The switches you bought will do as well, whichever fits your needs. I was happy with the original switches but how can both die on me, sadness. Had to replace. Worth it.
@@ChargedPulsar Well i bought new G305 today coz my old one after cleaning it lasted 3 days without double click, now im waiting for switches also gona get some grip tapes and new sliders, and if everything gona go smoothly my sister would get almost new mouse and i will keep moded one.
The glides has been through hard time
If anyone interested, this is how you make quality content and likable videos. 👍
For anyone who first time attempting to disassemble their mouse, I highly suggest that you use something sharp to take off the mouse skates. Don't peel it by your nail or you will ruin it.
consider the skates a lost cause. get a replacement set.
@@JessicaFEREM fortunately mine still works. the adhesive still sticks.
@@warnacokelat good good. I'm just saying that more often than not they end up broken.good for you tho
1:10 pick up that screw! 😄
Be careful while pulling out LMB and RMB triggers (plastic cover). I've twisted RMB trigger and now it has significant pre-travel
I can’t even pull the out:(
I fixed my G305. Thank you!
Oh man, the wheel feels like new again. I'd forgotten that sensation.
Thanks for the video, it was helpful!
overall good tutorial but tips for anyone doing this
-when taking out the wires of the mouse buttons dont just yank they might be glued in and will remove the isolation like mine
-if you want to remove the thumb mouse buttons there are 2 more screws inside the little hole where the switches were
-the latch at the beginning you want to push the plastic instead of the latch
what did you do to remove the glue sir
@@ilhambintang7547 ionno honestly could try hair dryer to loosen up but if that don't work go in with a scalpel and sacrifice a little bit of the side isolation just be careful it's thin asf
isolation? it's insulation you clown
this is gonna help me when i shell swap my mouse
edit- shell swapping went really shitty but i at least figured out how to fix it
@@notTerabyte yo can u share a video or something and also will just changing the bottom shell be tedious. Thanks in advanced.
Bro never found that one screw again
Thank you! I really needed this =)
getting out/in the left and right click black/white buttons was a pain in the ass, that took the longest time (over an hour for me lol)
The right click of my G305 was not working properly. I fixed it disconnecting it from the board and connecting it again. Sadly, after removing the mouse feet in order to access the screws you will have worse gliding experience, since it gets a little bit damaged.
Hey so I have this mouse and one of my mouse buttons just propped up and theres a lot of distance between it and the base of the mouse, making my cps lower. any way I can get the button back to it's normal height?
i have the same issue, have u figured it out?
+
Thank you! 👍
Thanks a lot!!!
What is the size of the screwdriver for the pcb screws and the ones that hold the mouse clicks? I started to open it but I could only remove the first 4 that are under the sliders and the others were smaller and I want to know the size to buy a screwdriver. Thank you
Thank you for this tutorial, luckily i still have my double-click old 305
My scroll wheel keeps activating randomly. I used a can of air and that worked for a while. Is it possible I tear this down and find dirt/hair and remove it I'm good? Sigh. Annoying cause I've only had it a couple months.
how would one rip off the scroll wheel from the motherboard for replacement?
The tucked in cables from the clicks were the enemy on my model. Literally had to bend the plastic a bit because the cables were tucked so tightly into it and I didnt wanna damage the cables
For people who have issues with clicking and dragging (e.g. icons dropping while the button is technically still clicked), if cleaning doesn't help try lowering the report rate in Logitech's Gaming Software to 250 even 125.
f
WD40 in the clicker and the double click issue is fixed! thank you fore the video
The best mouse in the world
Not quite. Rather: The best (very) budget mouse in the world.
The mouse is very good overall. However, both of my switches are double clicking now and I have to replace them. I wasn't expecting this. Also I had to modify the chasis to suit my hand better, it's slippery on the long run. Old g7 mouses had better shape.
My IPS button on the G304 mouse is not perfectly centered which annoyed me. Haish.
Taking out the battery compartment makes removing the M1 M2 triggers easier
Can you remove those side buttons? Thx for the help :)
It's simple to remove the side buttons:)
If you see my other video where I 3d print a new shell for it, you can see the side Button PCB
@@Ananords thx man
You could disable them by software
Thank you, just finished to repair my left click. Peace !!
wish anyone could help. i lost my dongle a couple of years back, was wondering if theres a replacement for its pvc chip that comes with its own receiver ? i tried contacting logi support but unfortunately they cant provide any replacement since the dongle is unique only to its unit. or make it wired i guess i dont mind so just i could use it again as a back up mouse. i was really hoping to encounter a thread where they discuss this nerdy mod.
Nah bro they sent me free dongle just send the receipt and serial number
@@bosiorne2292 G304/G305 ? i already contacted them and sent the details but unfortunately they can't ship here in the Philippines. theres also a similar case but they were sent a new unit instead, i dont think another dongle would work
My G305 led just died today, any idea of how to fix this?
me too :C
only the led? the mouse still working?
@@estebannicolas6741 Yep, the mouse working just fine after a year. It just sucks the LED died and i still don't know how to fix it.
Why does Logitech use upgraded Kailh for every switch then use cheapo Omron switches for the main two?
Thanks for the video btw. Helped out big time....
yeah the half-red kailh switches as side buttons in the newer ones are much better
Anyone know what the scroll click microswitch is? mine starting to double clicking so i want to search for the spare parts for it
2 pin 7.3mm square switch
hey this tutorial has some jank in it, remove the battery compartment first BEFORE the mouse buttons
thanks for the vid!
Guys unless it's broken and you're trying to fix it, don't tear it down. It literally requires too much force to open and will never be put back together again as it's brand new. I opened it to do some stupid mod i found on reddit and now i turned it to a squeaky mess even if i undo the mod (before this process mouse was feeling rock solid). The screws and the shell are tightened with a special force in factory. And if you try to open it the risk of messing up it's tightness is almost inevitable and probably every part of it will start to squeak or crack. Now i'm just waiting for my mouse to die so i can get a new one cause i can't enjoy using it anymore, it's so squeaky.
this is great. have opened my G304 about 3-5 times but haven't remove the battery area part. I'm currently having a problem where the mouse turns off sometimes, especially if you bumped it a little hard (on the keyboard or the desk itself). Upon checking, trying to move the battery while mouse is on, it sometimes turns off. So a little electrical problem? I would have to check the wirings. Hopefully something that can be fixed without re-soldering because I don't have the tools. If you have any suggestion, I would appreciate it. :)
You can find cheap solder kits with everything you need, I can assure you, it's worth buying. You never know when you need them, but when you do you'll be happy you bought them !
are you sure it's not the battery nor the springs?
aluminium foil on battery slot
try scrubbing some vinegar+baking soda on the contacts with a cotton swab first. it will eat off any corrosion which could be causing the battery to become unreliable. if the battery feels loose, put some tin toil at the end of the slot to make up for the space
Is it possible to adjust the actuation force of the main mouse buttons
I think it is possible to buy other switches and replace them, so yes
Thank you
They can make the screw not in the feet, but hey goota do planned obselesence
THANK YOU ❤❤❤
Anyone knew what's the wheel's microswitch?
Helped me a lot, but I should had watched whole vid before taking down my mouse lol
Didn't realize the battery housing can also be torn down, which makes it way easier accessing the micro switch.
🙌
thanks. I tried to do the triple a battery mod with the tin foil and a small piece of tinfoil got inside the mouse and has been rattling inside. better now
is it easy to assemble them back ? and where is the switch for the wheel button ? thanks.
the scroll wheel switch is soldiered onto the main pcb
Are those switches original?
thanks for this video btw.
If they are not original, do you plan to do a tutorial to show how to do it?
they are original from my observation.
if you're gonna replace them, get some kalih switches instead of garbage omrons, and all you need to do is desolder the old one and put the new one on. but if you're gonna do one switch, it can't hurt to do them all so you don't have to do it for a long time.
Thanks
I did this to try and fix my mouse cause the right click button was broken, safe to say I had no clue how dirty it could get in there!😅😱
i spilled water on the wireless usb , am i dun goofed, i just bought it today , im mad as hell
RIP
Muy bueno, gracias
ghost click issue still there sadly
bro love u sm
GOD video brooooo ty
can i reuse the feet again
If you are careful when you remove them you can glue them back on
Ananords thanks
Get some hyperglides from aliexpress for cheap my guy
You could do that too, that would be better
Can you say all the parts plsss
I need to know the name of the clicker thing
Gracias
desmontar e facil quero ver montar agr kkk
Rojo izquierdo arriba
Just finished with 2 srews more SML
yeah guess im just gonna buy a new one lol
im no engineer but i can say for sure that this mouse is way too over engineered
Replace Battery
makes these mice feel so cheap 😂(and they prolly are.)
У кого дабл клик или "недоклик" приклейте что-нибудь к кнопкам мыши с обратной стороны, к той выпуклости с которая касается кликера, я наклеил пару слоев наклеек 4x4 мм, мне помогло, старая накладка прогнулась в месте соприкосновения с кликером.
fun fact on expensive mouse dpi change button is flat to buttons. any other mouse this shit sticks out 2 fuckin meters. thx logitech. i must disassemble mouse and cut that shit down