Mercedes Benz 190E W201 | Hood Pad Installation | Motorraumdämmung
HTML-код
- Опубликовано: 8 сен 2024
- What‘s up everybody? Welcome back to my channel!
For a long time, the ugly sight of the bonnet bothered me. The nightmares are finally over! I bought the insulation pad over a year ago but couldn't attach it due to the weather. I took advantage of the good weather and attached it. I hope you enjoy it.
Anough talk, enjoy watching!
Like, comment and subscribe, for more KUNIQUE Projects videos.
__________________________________________________________
Get a manual for your 190E: amzn.to/34IpIRG
Spare Parts:
Hood Pad: amzn.to/3wi2A8A
Tools & equipment used in this episode:
Glue: ebay.us/NRF92W
Plastic Spatula: amzn.to/3wiPebZ
Recording Setup:
Camera: amzn.to/38XtfNk
Tripod: amzn.to/351LBvD
Microphone: amzn.to/34sZD8G
Some of the links in the description are affiliate links. This means if you click on the link and purchase the item, I will receive an affiliate commission at no extra cost to you.
__________________________________________________________
Follow me also on Social media to keep up to date with videos and behind the scenes.
✘ IG ⇒ @kunique.projects
thank you for the tuto.
you are doing a great job
i was wondering on how to restaur the old car of my father, now i will watch all of your video!
thank you also for all the link you provide.
Many thanks Maxime. Appreciate your feedback and support!
This is extremely helpful as all ways is the case with this Chanel!
Thanks for the nice feedback Dan! I’m happy to hear that this was helpful.
Very useful since my car doesn't have the pad at all. Thanks !
I think for people doing this on their own, which how I prefer to work, the best option would be to remove the hood / bonnet, and lay it on some blankets to protect the paintwork. That way you can trial fit it without glue. I'd use a heat resistant spray glue to tack the bottom or top depending on preference, then work my way along. The trouble with working with somweone else is that whilst you know exactly what you want to do, the other guy is just doing what they're told - which can be problematic when you've only one shot with a quick setting glue.
Thanks for sharing other ways how it can be done! 👍🏼🙂
Ahhh, my next job🙃.
Hahaha. Nice introduction man. 😉 and as always nice cleaning tips. 👌
Haha thank you, John! 😃
I think the full pad is for the diesels. The Petrol modes had a smaller pad but it probably makes sense to put the big one on for the reasons you mentioned. My only concern would be that the temperature while running may get a little hot.
Thank you for sharing your information John! At the beginning, I was also a little skeptical, but I partly drove the car above 30 degrees Celsius and had no problems with overheating. I think the wind compensates the heat.
Я установил такую шумоизоляцию 3 года назад. Двигатель в жару не перегревается.
I did exactly the same but fitted the smaller replacement MB genuine pad, I read about the heat buildup issue but also I read that it wasn’t a problem either, it will be interesting to see overtime how are you get on with this full pad and whether you feel there are noise reduction benefits.
I have to take a look! So far, I haven't had any problems with overheating. Not even in warmer weather conditions. And I can already say that the noise has definitely become less. It feels like the car is running much quieter.
nice
I really need this video
thankyou so much👍👍👌👌
You are welcome, Arshia.
Thank you for the support!
You are welcome, Arshia.
Thank you for the support!
Love the intro 🤣
Thanks Dennis 😂
❤Sehr gut gelungenes Video, besonders den Anfang finde ich passend dazu 😂 Das seht mir noch bevor. Kann ich statt Acetone auch Isopropanol verwenden? Weil das ist sanfter an Oberflächen. Als Kleber wurde mir handelsüblicher Sprühkleber jeglicher Art empfohlen. Jetzt, nach diesem Video, bin ich ratlos was ich nehmen soll? Meine Dämmmatte hab ich bei Mercedes direkt bekommen, gibt es aber nicht mehr für alle Modelle. Weiß auch nicht was nun Vorder oder Rückseite ist weil die genau gleich aussehen? Übrigens, sehr gutes Englisch👏und Liebe Grüße
Hi Josinora, danke für dein Feedback! 😃
Ich habe vieles benutzt, was ich gerade zur Hand hatte. Also nicht davon irritieren lassen. Isopropanol sollte zum reinigen ausreichend sein. Beim Sprühkleber würde ich darauf achten, dass der Hitzebeständig ist, da es schon mal ganz warm werden kann. Wäre ärgerlich, wenn sich die Matte/Kleber wegen der Hitze löst. Puuh, ich weiß nicht wie das Original aussieht, deswegen kann ich dir dazu schwer was sagen. Frag doch mal bei Benz nach? Bis dahin und liebe Grüße
@@KUNIQUE vielen Dank für die Info und liebe Grüße
hahhah, funny intro! thanks for another great video. Plz share with us the part number or the link from where u purchased it.
A little concern, won't the engine bay heat weaken the glue and make the hoodpad start sagging? I once changed the cloth of my CLK headliner since the other was quite dirty and that was the end of it, on sunny days it was always sagging, which was annoying for a car that I used to love soo much.
Thanks Victor! 😃
I shared the link of the pad and the glue in the description.
The glue I have used is usually heat resistant (as per personal experience). There is no problem so far and it sticks perfectly to the hood. I don’t think the heat will weaken the glue. But I will keep an eye on it.
@@KUNIQUE Thanks a lot brother, sorry I had not checked the description before. Less than 50€ seems to be a fair price, it's not as expensive as I thought.
Time now to go get a germany-english dictionary, Lol 😁
@@KUNIQUE Hey, which glue is it? The link doesnt work anymore...
What glue did you use? How well does it handle high temperatures?
Hi Julio, the glue is linked in the description box. So far it sticks very well and I have no problems with high temperature.
I am curious how it this after 1 year? I am scared to install one because of the heat i can melt.
Hi Cristi, the condition is still good. These insulations are made for high temperature. They shouldn’t melt easily. You can watch the status update episode which I have posted 2 months ago. There you can see the condition.
What is the glue called you used on the bonnet hood and door card repair ? Regards cliff
Hi Cliff, you can find the link in the description box of the door card episode.
Make a video cleaning the water reservoir!!!!
Soon or later, that will also come :)
@@KUNIQUE I just got my 190E three days ago and I’m doing the same fixes as you except for the dashboard :) Great channel
Thank you Sharon and congrats to your new car! 👍🏼
Does the absence of this lining cause cold heating in cold and rainy weather???
Sorry, I didn't understand the question
Welchen kleber verwendet er?ich hab aktuell die selbe Baustelle nur fehlt mir jetz der kleber?gerne für tipps.
Hi Martin, du kannst den Link zum Kleber in der Beschreibung finden. Hoffe das hilft!
where do you buy a hood pad from ? what does it cost ? what clue was that ? what does that cost ? what did you clean the hood with at the begging ?
Hi Mickey, all links can be found at the description section. Cheers
Clean the radiator
Excuse me, where do they sell them, I'm from Costa Rica
Hi Alberto, I have share the link in the description section. You can check it there. But I’m not sure if they offer shipping to Costa Rica.
@@KUNIQUE thanks a lot
Hallo, welchen Kleber benutzen sie hier bitte?
Brauche auch Dankeschön.
Mfg.
Hallo, ich habe den Kleber von Bonaterm benutzt. Den Link dazu habe ich in die Beschreibung gepackt. Beste Grüße
@@KUNIQUE Danke sehr.
👍🏻👍🏻👍🏻👍🏻
How long did all this take you?
I would say approximately 3 hours.
@@KUNIQUE thank you for the reply my friend.
Perfect 👍
Part number ? 😊
Merhaba Caner. Teşekkür ederim. Linki videonun açıklama kısmında bulabilirsin 😊
@@KUNIQUE çok teşekkür ederim,sıkı takip ediyorum yeni videolarını bekliyorum 👍
Rica ederim ne demek. Desteğin için ben teşekkür ederim. Hayırlı akşamlar
Привет! А где ты заказывал такую защиту?
Здравствуйте, Юрий, вы можете найти ссылку на него в описании
🐓🐓🐓