Thank, Question, my s1 you can rack lever in safe or fire mode. Also i can pull pin to take trigger pack out reguardless of positions is this normal ops
You’re welcome. This scorpion is my buddy’s so I asked him your question. Below is what he said. “Yes you can rack regardless of trigger position. And you can pull the trigger pack out with some manipulation It's like a puzzle piece around the extractor There's just less to fiddle with when the bolt’s locked back”. I hope this helps. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
Thank you for the great video, good step by step details. Great for a CZ Scorpion beginner. Curious what model and where did you get the aftermarket safety selector and magazine release?
I’m glad you liked the video. This one is Evo 3 pistol and both of them are from HB Industries. Thanks for watching and leaving a comment. Have a great day.
Hey West, I’m so glad you liked the video. You can’t co-witness the irons with the optic. The owner of this gun said he went with a quick release lever for the optic mount in case the optic failed. Thanks for watching and leaving a comment. Have a great day.
Don't apologize. This particular firearm has a stronger recoil compared to others, but I'm confident that you'll be able to handle it just fine. In my opinion, the best way to determine if you like a firearm is to rent it from a nearby place. This will give you a chance to try it out and see if it suits your needs.
I’m glad you liked the video. I swear by Break Free CLP. It’s a cleaner and lubricant. Congrats on the new pcc. Thanks for watching and leaving a comment. 🤜🏼🤛🏼
Hey there, it's hard for me to know what's wrong without seeing it in person. You should take it apart and follow the video again to put it back together. Maybe watch the full video first and then try to follow the video putting it back together. Let me know how you make out.
@UBRArsenal I have, and idk what part I'm missing.. it inserts fine, and it assembles perfectly, but when I put the lower part in and the release of the charging handle, the bolt is stuck and doesn't come forward..
I understand you don't want me to call this pistol a pistol but I'm not sure what you want me to call this pistol. If you look this pistol up, it’s categorized as a pistol. If this pistol didn't have a pistol brace on it, and it had a stock on it, then it wouldn't be a pistol anymore. Then it would be considered an SBR, not a pistol. Sorry, the word pistol was so triggering for you. Have a great day. “Pistol”.
If you’re not a firearms instructor, you should be. This is the best disassemble / reassemble video I’ve ever seen for any firearm. Thank you.
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
🤜🤛
I feel like a kindergartener could follow this guys directions
Ya I agree!! Great job Sir.👍
Congratulations, this was the best video about the disassembly and assembly of this weapon, greetings from Brazil
I didn't realize I had viewers from Brazil. I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Got this one saved. Everything you need and nothing you don’t.
That's awesome! I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
One of the best and most detailed field strip videos I’ve seen. Thank you for this my friend!
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
By far the best explanation of disassembling, the scorpion. Thanks for taking the time.
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
👍🏼🤜🤛
Excellent presentation! Clean gun, clear delivery, good coverage!
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Truly excellent video on how to field strip the CZ Scorpion EVO 3. A big thank you for making this video available.
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Thank you for this video. Very informative and very detailed instructions. Good job!
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Way easier than i thought it would be.
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Great video! Clear, concise and to the point. Now I can field strip my new scorpion without a time consuming read in the owners manual.
I’m so glad you liked the video and congrats on your new Scorpion. Thanks for watching and leaving a comment. Have a great day.
👍🏼🤜🤛
Well done, very simple yet detailed instructions!!
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
I love CZ scorpion 💪🏻🇨🇿
Me too 👍🏼🤜🤛
Very excellent explanation
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
You're a great demonstrator instructor 👍
Thank you! I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Well done- great level of detail and key points to look for. Solid work!
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
👍🏼🤜🤛
Very good video, right to the point and easy to follow along
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Great instructions ❤
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Great video!! Very thorough and great explaining👏👏
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
Nicely done. Thank you
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Thanks so much for this video. My CZ has been in storage and I completely forgot how to strip it down.
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
well done, thank you. great video!
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Great video! Very informative, detailed step by step instructions! Awesome!
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
CZ or Nexus should sponsor you. Great video
Thanks! I wish they would. Glad you liked the video.
Extreamly detailed! Thank you for taking the time to go through the whole process.
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
👍🏼🤜🤛
Great video!
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Thanks for posting this video. Merry Christmas!!!🎄🎁
Hey Bob, you’re welcome. Merry Christmas to you too bro! Thanks for watching and leaving a comment.
Just picked up my scorpion last night was curious how it came apart good video 😊
I’m glad you liked the video. Congrats on your new Scorpion. Thanks for watching and leaving a comment. Have a great day.
Very clear. Thanks!
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Very helpful, thanks
Hey Ira, you’re welcome buddy. Thanks for watching and leaving a comment. Have a great day!
great clear explanation thank you sir ! 👍👍
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@@UBRArsenal you too !
Good vid
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Very well done. Earned yourself a like, sub, and comment!
I’m so glad you liked the video. Thanks for watching, leaving a comment and especially subscribing. Have a great day.
👍🏼🤜🤛
Thanks for this! New sub!
You're welcome. Thanks for subbing. You're the man. 👍🏼🤜🤛
perfectly done..
Hey, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
Thank, Question, my s1 you can rack lever in safe or fire mode. Also i can pull pin to take trigger pack out reguardless of positions is this normal ops
You’re welcome. This scorpion is my buddy’s so I asked him your question. Below is what he said.
“Yes you can rack regardless of trigger position. And you can pull the trigger pack out with some manipulation It's like a puzzle piece around the extractor
There's just less to fiddle with when the bolt’s locked back”.
I hope this helps. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
Thank you for the great video, good step by step details. Great for a CZ Scorpion beginner. Curious what model and where did you get the aftermarket safety selector and magazine release?
I’m glad you liked the video. This one is Evo 3 pistol and both of them are from HB Industries. Thanks for watching and leaving a comment. Have a great day.
@@UBRArsenal Thanks!
Well done! Very clear. Does your Holosun green dot scope co-witness the iron sights?
Hey West, I’m so glad you liked the video. You can’t co-witness the irons with the optic. The owner of this gun said he went with a quick release lever for the optic mount in case the optic failed. Thanks for watching and leaving a comment. Have a great day.
Is it all everything you need to do if you wanna clean it? Thank you
Great job. Thanks so much. Has your Scorpion been reliable ? I heard that some had out of battery discharges.
We haven't had any issues with this Scorpion. Thanks for watching and leaving a comment. Have a great day.
@@UBRArsenal thanks for your reply. Much appreciated
You're welcome 👍🏼
@@UBRArsenal sorry, one more question. How is the recoil on the carbine ?
Don't apologize. This particular firearm has a stronger recoil compared to others, but I'm confident that you'll be able to handle it just fine. In my opinion, the best way to determine if you like a firearm is to rent it from a nearby place. This will give you a chance to try it out and see if it suits your needs.
Is it normal for the bolt to be chipped near where the hammer gets slammed? Mine looks exactly like yours, I'm just afraid it'll explode on me
Wheres the mag release from? HB industries?
Dudeee, just wow, i got the carbine, by the way, what oil do you use, i need to break mine in, its dried up, just got it from the store jan 14.
I’m glad you liked the video. I swear by Break Free CLP. It’s a cleaner and lubricant. Congrats on the new pcc. Thanks for watching and leaving a comment. 🤜🏼🤛🏼
Sweeeeet!!
Hey Pete, thanks for watching and supporting the channel. 👍🏼🤜🏼🤛🏼
Now I can’t load it when I have the mag inside, what did I do wrong?😖
Hey there, it's hard for me to know what's wrong without seeing it in person. You should take it apart and follow the video again to put it back together. Maybe watch the full video first and then try to follow the video putting it back together. Let me know how you make out.
I put the bottom in and then press the pin, but when I release the charging handle, nothing happens.. idk what I'm doing wrong
I would say take everything apart again and try to follow the video step by step again to see if you missed a step. Let me know how you make out.
@UBRArsenal I have, and idk what part I'm missing.. it inserts fine, and it assembles perfectly, but when I put the lower part in and the release of the charging handle, the bolt is stuck and doesn't come forward..
Same issue, did you figure it out?
The problem is the hammer needs to be pulled back and seated in the holding pins before putting the lower back in.
@joeyk19801 yeah lol it took me an eternity to figure it out! Had me swearing to nvr clean this gun again lol
I did everything you did and re assembled it but now my charging handle is not racking my gun
I would take it apart and follow the video again. I’m guessing something isn’t connected to the recoil spring.
Same problem. I've taken it apart and put back together multiple times. Won't work after I put the lower back in
Figured it out. You need to make sure the hammer is cocked back and seated in the holding pins before you put the lower in.
My Cz scorpion trigger group is wobbly is mine fucked?
Anyone else find this from google?
You found this video from a Google search?
Brought here by Google as well
Gotcha, I'm just glad you guys were able to find my videos. 👍🏼
Here too
Found from Google
"How I do that."
Forget the safety crap! Just to please YT. Let’s get on with it.
Ok again wrong video 😂🤣!
I am just trying to disassemble my AIRSOFT scorpio evo
It's like you did it as fast as you could to ensure nobody was able to actually understand what you're doing. 😂
Omg stop saying pistol every 2 seconds. Its not a pistol.
I understand you don't want me to call this pistol a pistol but I'm not sure what you want me to call this pistol. If you look this pistol up, it’s categorized as a pistol. If this pistol didn't have a pistol brace on it, and it had a stock on it, then it wouldn't be a pistol anymore. Then it would be considered an SBR, not a pistol. Sorry, the word pistol was so triggering for you. Have a great day. “Pistol”.
@@UBRArsenal11 times in 6 sentences. Nicely done, sir. 😂
@@UBRArsenal😂😂
Thanks! 😂
@@UBRArsenal 😍
Excellent almost PMS card details.
PMS?
@@UBRArsenal US Navy: Preventative Maintenance System
Ahhh ok, gotcha. Thanks for explaining. 👍🏼🤜🤛
Crvena zastava, Srbija.. Haug
Excellent video. Thank you.
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.