Great Video, I recomand a small safe Electric screw driver will add that ASMR effect that feels satisfying when a build is bieng done. The manual scre driver screaches a bit but just a sugestion as a viewer awsome build. Just found your channel.. Subscribed.
Revenant from SFFN here. Very, very clean build. I like it a lot. I've featured it as a Build Profile on the main page and in the SFFN forum. Do you have 2.5 drives in rig?
How did you manage to get the cabling so organized, is that a custom loom 7660b? My standard 7660b PSU has a lot of cabling that it's impossible to hide as you did
I "made" it myself. It is noctua fan frame (sawed) from this mod. www.reddit.com/r/sffpc/comments/n1vid8/nothing_perfect_but_maybe_this_gpu_fan_mod_is/
One of the nicest cases out there, but expensive. Even used it's around the £100 mark. Do you think using AMD would drop the thermal demand and thus the noise?
100 used is reasonable because shipping from china and tax cost about 50.. I think AMD changes nothing. It is actually not really too loud when gaming.
Can you bend a l12 ghost edition (66mm height) to fit in this? Like people used to bend the original l12 to fit in the ghost s1 I also thought that by not using a screwsocket for the mobo, and using a cardboardbox instead, you would save 1 precious centimeter
Nice video mate. Question: Would be nice to see how to you made the custom cables inside the PSU. I have done a few cables myself on a normal SFX PSU but never on a FLEX PSU. Any guides or something out there? I went with a SilverStone SST-FX350-G cause that's what was sold in my country. Looking forward to more videos from you!
Really nice build and awesome filming, you're going to be big someday.
Thank you.
Really cool, the build and the video itself, so many thoughtful cuts and great work with light. ❤
Very nice!!! I love your videos! Can’t wait for the next one!
Great Video, I recomand a small safe Electric screw driver will add that ASMR effect that feels satisfying when a build is bieng done. The manual scre driver screaches a bit but just a sugestion as a viewer awsome build. Just found your channel.. Subscribed.
Thank you. Yes I bought new screw driver.
0:29 What frame is that? I'm using Noctua pads right now.
Never mind. I see you made it.
Blown away by ur videos 😅
Revenant from SFFN here. Very, very clean build. I like it a lot. I've featured it as a Build Profile on the main page and in the SFFN forum. Do you have 2.5 drives in rig?
Wow thank you very much for that. Yes there are 2x 2.5 drives in there ( 2:20, pre-attached to big frame).
Definitely a bit noisy, but the underclock + undervolt makes it reasonable.
Awesome build !
What CPU cooler and heat radiator you use ?
Thanks. CPU cooler is Black Ridge.
wow, this build is just amazing. +1 subscriber. And just a little question, has the graphics card been modified ?
Yes, custom with Noctua fans.
@@MillouwzBaby You just changed the fans or everything else too
Thank you. Only noctua fan replacement. www.reddit.com/r/sffpc/comments/tnoyvm/another_gpu_noctua_fan_mod_and_case_fan_natively/
@@RelaxingSFF ok, thanks for the link
How did you manage to get the cabling so organized, is that a custom loom 7660b? My standard 7660b PSU has a lot of cabling that it's impossible to hide as you did
I shortened and trimmed unnecessary wires.
Hey, cool build, love the space utilization. You got a link to that fan frame?
I "made" it myself. It is noctua fan frame (sawed) from this mod. www.reddit.com/r/sffpc/comments/n1vid8/nothing_perfect_but_maybe_this_gpu_fan_mod_is/
@@RelaxingSFF ah, gotcha
One of the nicest cases out there, but expensive. Even used it's around the £100 mark. Do you think using AMD would drop the thermal demand and thus the noise?
100 used is reasonable because shipping from china and tax cost about 50.. I think AMD changes nothing. It is actually not really too loud when gaming.
Awesome job!
i just wish i could get hands on that motherboard, any msi itx is way too damn expensive
awesome build and 4 ssd's?? damn
Thank you. That board is now about 100EUR/USD on ebay.
Can you bend a l12 ghost edition (66mm height) to fit in this? Like people used to bend the original l12 to fit in the ghost s1
I also thought that by not using a screwsocket for the mobo, and using a cardboardbox instead, you would save 1 precious centimeter
Impossible. People bend to gain a few mm, but in this case are 20mm.
Nice video mate. Question: Would be nice to see how to you made the custom cables inside the PSU. I have done a few cables myself on a normal SFX PSU but never on a FLEX PSU. Any guides or something out there? I went with a SilverStone SST-FX350-G cause that's what was sold in my country. Looking forward to more videos from you!
Thanks. I shortened wires and re-crimp all connector.
Damn i wish i could have this..
What was the flex psu?
where to buy fan bracket for reduce turbulence noise in black ridge?
That is noctua fan frame, the rest from this mod. www.reddit.com/r/sffpc/comments/n1vid8/nothing_perfect_but_maybe_this_gpu_fan_mod_is/
watched! 👌👌
Quality video
what about the specs?
Is this A4S V3 ?
It is.
Optimum Tech
subbed!
The cuts are a little to fast for me to be relaxing. Maybe you could also give us a little more time to read text?
Thank you for the feedback. Sure, next video.
Is the psu’s fan swapped? Asking for noise.
No. The original fan is already quiet. Fan swap is not worth.
that gpu looks weak
Yes, it is a OEM card in a prebuilt PC, they must optimize production cost.
Don´t like the power supply
the temperature is quite high tbh........
Not for pushing 140+ watts under Prime 95.
You're looking at high 70's low 80s in Cinebench R23 at that wattage.
Excellent temps.