An insane build a truely insane build, I agree. To watch it is to look into the abyss, peer into Heaven or perhaps Hell itself and come out forever changed, forever broken, forever seeing perfection hyperbole. I've only watched it once but it seems like I've watched it my whole life; every build I've seen, every structure, every part; every piece being built in real time in my mind. My mother, my late father; I their build, them my parts. When we are built we are truly complete, yet when we are replaced, thrown out like GARBAGE to the fucking curb for another to find anew; a lover, a larger world, or a new God??! Forgive me if I am perturbing, but this build? Unbroken.
The portability of this is insane too! I sometimes pack up my PC to bring it to my friend's house so we can game together and this would be absolutely perfect for that. So tiny, so clean, probably lightweight, likely fits into a backpack even...
@@JurgenSchober42 That is a very closed off system. There is open intake. But A case like this really wants some fans at the top exhausting the air out of the case. You could easily fry components that are too powerful, and you will almost certainly throttle anything you put in there that isn't on the lowest end of power draw. I have built a few SFF cases in this size range and the ones that have active exhaust at the top, especially for these sandwich style cases, perform drastically better than the ones that don't have active exhaust.
All intake is a good option, especially for SFF. I have a 3090 ti & 5900x in nr 200 (SFF), all intake(3 140mm), I'm not hitting any bottlenecks in tests and in gaming my temps are under 70C. I later added a 9mm exhaust, but that doesn't change anything. Now I speak from experience in in different scenarios might differ but my takeway was that in SFF with lots of air vents, the air will get out easy, and vortexes are less probable, also if you control the intake you can use filters and worry less about dust. All this and considering this build is mid range 4070 tops, I doubt there'll be any troubles with temps.
@@afanasieguler7833 It completely depends on the components and how the person chooses to run them (i.e. Overclock/undervolt, etc.) If you run hot components in a case with a closed top, then by all means, go with God. I can only tell you that with the Formd T1 that I am currently running, I can drop temps massively depending on how heavily I want to run the exhaust fans. This case is aesthetically amazing, but I'd definitely like to see some benchmarks before I trust how it performs thermally. The saving grace to me seems to be that the CPU side has a cut along the top for the hot air from the cooler to escape, but that GPU side looks totally closed and looks like it will have a harder time with how it handles the heat.
Case was made & designed by Chinese DIYER Xikii.The Maxsun MB H610 in this video was designed by another famous Chinese DIYER APE（We all call him Yuange）,and this strange specification was defined as YTX.U guys will see some awsome motherboards,gpus and cases which u cant find a single wire(even pcie wire) in front of cases soon😊
Nice to see that kind of plug being utilized, I've used that in a build 3 years ago and it provides simple and ease of use, especially when you constantly move your PC around which was also in my case that's why I chose the SFF life.
@@user-eu5ol7mx8y the connector is a powerCon, in that build the PSU is inside, you can see it when he/she opens the case, I believe it's a 1U power supply.
@@user-eu5ol7mx8y but if you want you can use a powerCon with DC voltage just make sure the polarities are correct, I built mine 3 years ago using an HDPlex with a DC power supply outside, but I moved to using a SFX PSU simply because the DC power supply was inefficient and the HDPlex was limited to 500W max which is below the required wattage for my CPU and GPU combo under high loads.
wau!😮 I keep coming back, pausing at each angle to see more and I just cant stop marvelling about this build. Wish you had 360° shot on a pedestal, or maybe not🤭 I really like the video☺
@@justinlikesme19 wym by that, look like a Rtx 2060 or 3060, and with a cpu collar like that, it has to be a i3-i5 or a Ryzen 5600 or 7600, and that’s a reasonable price for the both of em, not including the size of the man which is small, so it’s supposedly cheaper, two sticks of ddr4 or ddr5 ram, and a small itx case which is where I live, is cheap, so I see no problem here. Reasonable price for it.
@@justinlikesme19 there are more and more itx components nowadays, i think some more year when user base are large these custom itx thing should be cheaper
@@justinlikesme19 meh I’d pay why not, after all isn’t that what money is for? To show the accurate appraisal of one’s work in a means that justifies one to do said works. I say rock out and really give it your all because that work deserves the love. 👌🏽
@@justinlikesme19 It's not really expensive, It uses an dual 3060ti which is cheap for it's generation, It utilizes a i5-13400f which is cheap around 220$, Its 13th gen so it has some good power. The ram is a single 8gb HOF 3600 stick, 8gb because I cannot find a 16gb hof 3600 stick most come as 2x8 so two sticks instead of 1 which is around 190$ however it's hall of fame edition and can most likely be switched out with a different ram stick, The motherboard is the H610KING which I cannot find since I do not really have access to chinese internet so I can't really find all those websites, Asfor the ssd foni uses the PC005 which is 512gb and costs roughly 89$ and I'm guessing he's using the Samsung 980PRO since foni only listed 980PRO but for 1tb you pay roughly 99$ and for 2tb u pay roughly 160$, Foni is using the ENP 7660B power supply but I cannot find the exact plug he used so I'll make do with the regular plug power supplies come with which you would pay 145$ for the powersupply, The case I am not sure on price since it's chinese and listed as ￥2399 Which I'm guessing since its chinese uses the chinese renmibi as currency which means you would pay 345 usd for the case. Dual 3060ti costs around 430 orso, However I am unsure if it's possible to switch out with a Dual 3060 V2 OC edition since that has 12gb instead of 8gb and is cheaper for some reason coming out at around 360 and has pretty much the same speeds, Also pretty sure you can switch out the i5 with like an i9 13th gen since they have the same socket(The socket is LGA 1700 if I'm correct). Changing out the cpu does come at a higher price since cpu's tend to be way more expensive that the rest of a pc pretty much because it's what makes it work. So in total if u choose the 2tb 980PRO and this is excluding the motherboard since I cannot find the price then it all comes out at around 1579$ which for a pc is actually pretty cheap. Meaning not at all expensive like you were saying.
Greatest pc build pf all time. I always have to come back to watch this. I wish it was available in Canada. Would love to see you top this with a 4090 or something.
@@Legamerto "Für das fertige Produkt kann ich nur das aktuelle Modewort verwenden - Thai-Hose scharf!" Ich habe DeepL benutzt, um es zu übersetzen, aber ich verstehe die Bedeutung nicht lol
sick sick itx!!! i have built in a Node202 before and i also used the NH-L9i in silver-black which works incredibly well so great choice there! this build is on another level tho. the way the side panel perfectly fits around the gpu ... dude
Wow, I've never seen a case like this before. It looks very clean and unusual! 😳 Is there anything similar for Ryzen or more powerful graphics cards? Like 3080/4080 for example.
Unfortunately, this PC case is fully customized for selected PC parts and almost nothing you can change. That's why this PC case is so compact and beautiful.
А в чем необходимость была, ставить гриль поверх основного cpu кулера? Еще момент понравился с нестандартным коннектором питания. Обычно такие применяются в аудио оборудовании для последовательного запитывания всего массива. Нравится компактность. Еще очень интересны температуры cpu и в каком режиме ему предстоит работать.
Ну и шум интересно узнать, чую высоковат в нагрузке) Но визуально, конечно, ляпота лютая - лаконичный и компактный дизайн, смотрится как единое целое. Такой будет радовать глаз на столе каждый день
This is more a pc you're using in a cleaner environment like a laboratory. Or anywhere else you're not collecting tons of lint from clothing and furnishings
It's looking nice but sadly very restrictive in this form. You can't upgrade the motherboard (back panel molded into the case) and the GPU unless you're not mounting the side panel (or whatever that is) covering it. This could be adapted though to support more hardware so thumbs up.
If you are building something like this I don't think that upgrading is any less of your worries. You're just gonna buy a new one. you don't have to be very cynical and find a flaw, just enjoy the build and the video.
I feel like if you have funds to go aesthetic, you most likely have funds to be practical in the choices. If you go practical, aesthetic is probably least of your priority and if you want both, that's personal preference
This case was created by a content creator, it was inspired by the motherboard shown in the vid and it's basically a personal project, so it was made only for these specific hardware. if he really wants an upgrade he would just design a new case
Let's admit that it looks quite aesthetically pleasing and original. As for the cooling of the processor and the exhaust of a hot air stream, then there will be troubles.
GPU becoming a pc or a PC becoming a GPU.. It is not just a custom build but an art.
😂😂lol true
You're an art
@@pepito69 No you are
lol, is it what you call a "custom build" when they just put together things they can simply buy from the market?
All that dust
This is actually one of the most insane builds I've seen. Wow that's clean
You need to get out more.
@@gannicusnobody7782 seethe
@@gannicusnobody7782 People when they see other enjoying things.
@@gannicusnobody7782 cry
An insane build a truely insane build, I agree. To watch it is to look into the abyss, peer into Heaven or perhaps Hell itself and come out forever changed, forever broken, forever seeing perfection hyperbole. I've only watched it once but it seems like I've watched it my whole life; every build I've seen, every structure, every part; every piece being built in real time in my mind. My mother, my late father; I their build, them my parts. When we are built we are truly complete, yet when we are replaced, thrown out like GARBAGE to the fucking curb for another to find anew; a lover, a larger world, or a new God??! Forgive me if I am perturbing, but this build? Unbroken.
If there were a competition for a best looking PC built - I would vote for this without a doubt! It's so clean, beautiful, aesthetic and unique!
The portability of this is insane too! I sometimes pack up my PC to bring it to my friend's house so we can game together and this would be absolutely perfect for that. So tiny, so clean, probably lightweight, likely fits into a backpack even...
Visually, I love this. Practically... I am terrified by the lack of exhaust.
What exhaust? All vents are open.
@@JurgenSchober42
That is a very closed off system.
There is open intake. But A case like this really wants some fans at the top exhausting the air out of the case. You could easily fry components that are too powerful, and you will almost certainly throttle anything you put in there that isn't on the lowest end of power draw.
I have built a few SFF cases in this size range and the ones that have active exhaust at the top, especially for these sandwich style cases, perform drastically better than the ones that don't have active exhaust.
All intake is a good option, especially for SFF.
I have a 3090 ti & 5900x in nr 200 (SFF), all intake(3 140mm), I'm not hitting any bottlenecks in tests and in gaming my temps are under 70C.
I later added a 9mm exhaust, but that doesn't change anything.
Now I speak from experience in in different scenarios might differ but my takeway was that in SFF with lots of air vents, the air will get out easy, and vortexes are less probable, also if you control the intake you can use filters and worry less about dust.
All this and considering this build is mid range 4070 tops, I doubt there'll be any troubles with temps.
@@afanasieguler7833 It completely depends on the components and how the person chooses to run them (i.e. Overclock/undervolt, etc.) If you run hot components in a case with a closed top, then by all means, go with God.
I can only tell you that with the Formd T1 that I am currently running, I can drop temps massively depending on how heavily I want to run the exhaust fans.
This case is aesthetically amazing, but I'd definitely like to see some benchmarks before I trust how it performs thermally.
The saving grace to me seems to be that the CPU side has a cut along the top for the hot air from the cooler to escape, but that GPU side looks totally closed and looks like it will have a harder time with how it handles the heat.
Its open air no need for exhausts
Amazing design. I love how perfectly customized it is.
this build is beautiful 🤩
everyone's talking about the gpu side, but that motherboard side is just as pretty
it's maxsun. i have a maxsun motherboard. they are big in china. we don't get those, or SOYO
@@giorgio5789Maxsun is big in China, are you kidding?
Case was made & designed by Chinese DIYER Xikii.The Maxsun MB H610 in this video was designed by another famous Chinese DIYER APE（We all call him Yuange）,and this strange specification was defined as YTX.U guys will see some awsome motherboards,gpus and cases which u cant find a single wire(even pcie wire) in front of cases soon😊
Found it! ruclips.net/video/kyM4DvRB_f8/видео.html
Very interesting build! Extremely clean. That power cable looks very satisfying to plug in, great snap sound.
I LOVE this! It's beautiful, clean, minimalist. The building was so saisfying, and the way everithing is just fits together, is just amazing!
I really love how the GPU works with this case. Really cool!
That's way too clean. I like the GPU becoming a case intake as well. That was ingenious. Nice build!
just wow, everything looks custom made for this PC build... it's definitely aesthetically pleasing.
完美的客製化機箱，看到顯卡被完美包覆，連擋板都拆掉，只鎖中間的螺絲，真是神級的完美設計！
Its an asus mobo … hope it doesn’t explode.
@@trowawayacc No, it's not Asus. It's a Maxsun mobo.
没有显卡
@@user-bp5ik7hd2l 那外露的兩個風扇就是顯卡啊 下面不是寫了GPU:DUAL 3060TI
@@MikeChen-ez9gj 那是我看漏了，不好意思！
Nice to see that kind of plug being utilized, I've used that in a build 3 years ago and it provides simple and ease of use, especially when you constantly move your PC around which was also in my case that's why I chose the SFF life.
I've never seen this kind of plug before. Is the PSU outside of the case?
@@user-eu5ol7mx8y the connector is a powerCon, in that build the PSU is inside, you can see it when he/she opens the case, I believe it's a 1U power supply.
@@user-eu5ol7mx8y but if you want you can use a powerCon with DC voltage just make sure the polarities are correct, I built mine 3 years ago using an HDPlex with a DC power supply outside, but I moved to using a SFX PSU simply because the DC power supply was inefficient and the HDPlex was limited to 500W max which is below the required wattage for my CPU and GPU combo under high loads.
I didnt choose the sff life.. the sff life chose ME.
Impressive.
Simplistic and clean.
I'm not much of a fan of RGB leds everywhere so having this on the desk is nice.
This reminds me of that scene from Toy Story 2 where Woody is getting repaired
Look really clean, having gpu fit into pre-cut slot look really cool, if only there a way to stylize dust filters on to the case
Just keep your godam house clean 😂
@@Jadinandrews Thats not how dust work 😂😂😂
@@Jadinandrews dust is going to accumulate in there regardless.
@Jadinandrews you know you can't get rid of all the dust...right?
Am I the only one who found this oddly satisfying to watch, from the assembly, to just the way it was recorded
Clearly not my friend, look at all of those comments!
It's just so clean.
Horee chit this is awesome
That's the whole point of this style of videos...
it felt like asmr
Wow!!! I'be been building pcs for over 25 years and never have I seen such masterpiece!
wau!😮 I keep coming back, pausing at each angle to see more and I just cant stop marvelling about this build. Wish you had 360° shot on a pedestal, or maybe not🤭 I really like the video☺
I would love to see a video on how that case was manufactured, beautiful build ✌
That speakon power connector was sick among the rest of this amazing build.
He took “fits like a glove” to a whole new level 😂 congrats on the build 🍾🥂🏆🎉
我草 真特么的好看 除了不耐脏 简直是理想中的小机箱
This is the cleanest build I've ever seen.
very clean and creative, that's exactly what I want from a build. Swapping compnents for a better thing, so nice
That's not a computer. That's a cuddle pet you take to bed with you. 😂
This is an amazing design!!! I wish every PC would look this sleek and beautiful.
But are you willing to pay for an expensive pc like that?? 😂 remember having that kind of pc is too expensive because we’re paying for their work
@@justinlikesme19 wym by that, look like a Rtx 2060 or 3060, and with a cpu collar like that, it has to be a i3-i5 or a Ryzen 5600 or 7600, and that’s a reasonable price for the both of em, not including the size of the man which is small, so it’s supposedly cheaper, two sticks of ddr4 or ddr5 ram, and a small itx case which is where I live, is cheap, so I see no problem here. Reasonable price for it.
@@justinlikesme19 there are more and more itx components nowadays, i think some more year when user base are large these custom itx thing should be cheaper
@@justinlikesme19 meh I’d pay why not, after all isn’t that what money is for? To show the accurate appraisal of one’s work in a means that justifies one to do said works. I say rock out and really give it your all because that work deserves the love. 👌🏽
@@justinlikesme19 It's not really expensive, It uses an dual 3060ti which is cheap for it's generation, It utilizes a i5-13400f which is cheap around 220$, Its 13th gen so it has some good power. The ram is a single 8gb HOF 3600 stick, 8gb because I cannot find a 16gb hof 3600 stick most come as 2x8 so two sticks instead of 1 which is around 190$ however it's hall of fame edition and can most likely be switched out with a different ram stick, The motherboard is the H610KING which I cannot find since I do not really have access to chinese internet so I can't really find all those websites, Asfor the ssd foni uses the PC005 which is 512gb and costs roughly 89$ and I'm guessing he's using the Samsung 980PRO since foni only listed 980PRO but for 1tb you pay roughly 99$ and for 2tb u pay roughly 160$, Foni is using the ENP 7660B power supply but I cannot find the exact plug he used so I'll make do with the regular plug power supplies come with which you would pay 145$ for the powersupply, The case I am not sure on price since it's chinese and listed as ￥2399 Which I'm guessing since its chinese uses the chinese renmibi as currency which means you would pay 345 usd for the case. Dual 3060ti costs around 430 orso, However I am unsure if it's possible to switch out with a Dual 3060 V2 OC edition since that has 12gb instead of 8gb and is cheaper for some reason coming out at around 360 and has pretty much the same speeds, Also pretty sure you can switch out the i5 with like an i9 13th gen since they have the same socket(The socket is LGA 1700 if I'm correct). Changing out the cpu does come at a higher price since cpu's tend to be way more expensive that the rest of a pc pretty much because it's what makes it work. So in total if u choose the 2tb 980PRO and this is excluding the motherboard since I cannot find the price then it all comes out at around 1579$ which for a pc is actually pretty cheap. Meaning not at all expensive like you were saying.
I love this build so clean and not really overkill build like other channel does, love it can't wait for another videos
I can see this is aesthetically pleasing than any PC ever built by linus
以小型來說真的設計不錯，不過小機殼的防塵、散熱有很大的改進空間
很極限的設計 散熱扇都直接由外吸氣
不過我還是會想要有隔塵 空間再小 還是有需要放薄薄一層上去
只是好奇這個散熱量是不是就足夠日常應用...
neat af. 真心不错，这种设计缺点虽然非常明显，但是要是随便一想，多少普通人配完装机后 会选择修改主要部件的。更何况冲着这种设计去的人早就知道自己想要什么。
这种机箱真是在已经非常拥堵的itx机箱选择中 居然开辟了一个独占一旗的地方，而且还非常明显的特色，和非常不错的excution， 这点难能可贵。
靠 以为看到了自己的评论
我靠 居然一样的品味@@jyu5560
That is one cool looking & compact build. Love this! 🥰
I never thought electric screw drivers could be that handy in PC-builds
@2:16 when the cover perfectly fits with the gpu, so satisfying
Designer - How much airflow do you want on your gpu?
CEO - yes!
You're finally back. Keep up your good work, mate.
best pc build vid ive ever watched, keep it on!
好久沒看這樣喜歡的機殼了
显卡风扇和机箱融为一体的设计确实很独特，也很美观。但是风扇这样暴露，如果不小心碰到风扇容易损毁，建议加一些遮挡。
You might be the best Aesthetic PC builder RUclipsr right now.
This case sounds like it's made of ceramic! Fabulous!
This build is cleaner than my past and brighter than my future .!
That case looks amazing i wish i can buy something like that ... 10/10 ❤
Damn that looks clean! Even more minimal and white than my Fractal Torrent white with AERO motherboard.
Великолепная работа!
Я на работе также красиво всё делаю. Инженер хорошо запроектировал.
Wow the case fit for the gpu is so fucking cool
很舒服的一次不太完美的装机体验。舒服在于高度的定制化，完美搭配自己的选配。不太完美的地方是在最后居然没有整机的360视频而是放了一个开机动画，实在是不太理解😂
That is super cool build, love the white, and the SFF, really nice build
ART!!! ive been waiting years for this kind of case
Amazing, where dis you buy the case ?
i don’t speak the language of anyone in this comment section but i love this build
This is so absolutely satisfying. When the power cable twist locked I made an audible sound😩😂🖤
Greatest pc build pf all time. I always have to come back to watch this. I wish it was available in Canada. Would love to see you top this with a 4090 or something.
Looks like a portable air conditioner, I love it.
amazing build, absolutely stunning
Look how cute it is with how many components are packed in there!
What was the screw driver being used? Very satisfying video too 🙌
DIY 被玩出了品牌机的感觉
Linus Tech Tips has just released a vid about this case and I'm straight up remembering your channel
I only speak English but I want to say this is one of the most aesthetically beautiful builds I have ever seen
That is the sexiest build I have ever seen... thank you... This video made my life better.
对于这个成品，我只能用当下最热门的词语了--------泰裤辣！
抓到你了，快跟我一起回去
What the fuck do you mean thai pants are hot
In German pls.
@@Legamerto
"Für das fertige Produkt kann ich nur das aktuelle Modewort verwenden - Thai-Hose scharf!"
Ich habe DeepL benutzt, um es zu übersetzen, aber ich verstehe die Bedeutung nicht lol
@@user-jb8yv泰裤辣=太酷了=super cool
Потрясающе, все компоненты подогнаны просто идеально!
особенно h610 под 13400f
@@sxizures что тебя смущает?
@@varlaminik под таким кулером 13400 будет страшно кипитяриться
@@varlaminik лично меня смущает то, что ты не понимаешь, что смущает его.
@@autodystopia ахах, так если никто разгонять не будет его и играть в игры , сколько там будет тепла ?) Ну 60-70 ватт максимум) это много)))?
sick sick itx!!! i have built in a Node202 before and i also used the NH-L9i in silver-black which works incredibly well so great choice there! this build is on another level tho. the way the side panel perfectly fits around the gpu ... dude
Looks amazing. I would love to see the thermals.
I don't know about the practicality but I love the design ❤
plz specify the case, gpu and psu
What’s the case called ?
Really clever case, I wonder if there are other faceplates for different GPUs which wouldn't fit this one
Wow, I've never seen a case like this before. It looks very clean and unusual! 😳
Is there anything similar for Ryzen or more powerful graphics cards? Like 3080/4080 for example.
Unfortunately, this PC case is fully customized for selected PC parts and almost nothing you can change. That's why this PC case is so compact and beautiful.
@@NUberable It is a for fun project with limited production. Now it has sold out, not sure the designer has the will to produce again
nah bruh, wtf is that motherboard
like wtf that's a long ass itx motherboard
@@alistergoh9744 maxsun diy-ape h610 king, you literally can see it at 0:01
So smol so clean, it's even white!
超级直接的散热解决了itx的问题，太酷啦
невероятный корпус и подбор комплектующих!!!
@@Pepelnicza зимой в самый раз
Nice, extremely clean design.
Sometimes i don't like when building PC in super clean room like this since most people build it in average room with dust everywhere
PC building is getting smaller, smarter, and better.
Does only this GPU fit or how does it work with different size models?
only this GPU and MB
Это шедевр! Для этого корпуса используется только одна специальная материнская плата и видеокарта?
This is so clean i fell in love with this build
The most itx build I've seen. So clean
0:32 拿神之手來裝機這我真的頭一回見...
認真查了一下，這個機箱能用的主機板，散熱器等等選擇不多，所以會買的人基本上都是機箱+零配件整個套裝買回來裝，如果自已選零件很有可能裝不上。顯卡直接綁死了沒得選。而且這個機箱裝機難度很高，要去看機箱的裝機教學影片才有辦法裝好。
可能有人認為這個機箱不實用，不能選擇自已想要的零組件。但對不在意零組件彈性，玩遊戲不會把效能開到最高，又超級在意機箱美觀的人來說是很棒的選擇。像我公司有個美術妹子想玩PC遊戲但他們用的都是Mac，她想要的PC能玩遊戲，效能一般即可，又不能忍受機箱太醜太大，就很適合。反正這機箱是全客製化的，過陣子大概又會出性能好一點的版本吧？
顯卡的設計我是覺得很不錯，一直覺得小機箱直接把顯卡散熱器直接露在機箱外面就好了，管它幾槽設計，散熱又好，但不適合家裏有小孩有寵物（尤其是貓）的。
@@kevinlantw 有客户跟作者提过想要适配ASUS dual 4070 显卡的版本，但是最终作者会不会制作暂时还不知道。。。
这种机箱， 放一个半年里面全是灰尘，不太实用， 需要定时清理机箱内部 非常麻烦， 大的机箱几乎都会有防尘网，只需要抽出清洗即可，方便又省时， 虽然还是会有少许的灰尘进入机箱内部，但是清理机箱内部的周期肯定比这个机箱来得少
@@TheLietliet 也还好，这种只要手固定风扇，空压机直接吹就行。关键是一般用这机箱的家里不会有空压机
做成套裝電腦賣 噱頭性十足
А в чем необходимость была, ставить гриль поверх основного cpu кулера? Еще момент понравился с нестандартным коннектором питания. Обычно такие применяются в аудио оборудовании для последовательного запитывания всего массива. Нравится компактность. Еще очень интересны температуры cpu и в каком режиме ему предстоит работать.
Ну и шум интересно узнать, чую высоковат в нагрузке)
Но визуально, конечно, ляпота лютая - лаконичный и компактный дизайн, смотрится как единое целое. Такой будет радовать глаз на столе каждый день
@@max70gtr снаружи пыль протереть быстро, на кулерах она будет скапливаться с внутренней стороны, т.е. не будет видно
It is so stylishly put together.
There is no better looking PC in the world at this time.
Il est magnifique ! Tellement équilibré dans son design.
Wow this looks amazing
I'd need my dust filter covering the GPU fans otherwise it would turn into a dirty mess 😅
Overall the whole case is non practical.
It's only good for show piece 😀
This is more a pc you're using in a cleaner environment like a laboratory. Or anywhere else you're not collecting tons of lint from clothing and furnishings
Amazing and compact mini Itx build!!! Great job thanks for share
really astonishing pc build you made, next time can you make a small one with an exhaust ❤❤
What the hell? This is amazing. Why aren't more cases integrating the gpu like this?
omg that case and gpu
And mobo
合身和完成是驚人的!
excellent compact design, but some mesh filters would be helpfull for dust protection
這個集成度太狠了 yyds
It's looking nice but sadly very restrictive in this form. You can't upgrade the motherboard (back panel molded into the case) and the GPU unless you're not mounting the side panel (or whatever that is) covering it. This could be adapted though to support more hardware so thumbs up.
If you are building something like this I don't think that upgrading is any less of your worries. You're just gonna buy a new one. you don't have to be very cynical and find a flaw, just enjoy the build and the video.
@@burntsouffle I'm very much practical rather than cynical.
I feel like if you have funds to go aesthetic, you most likely have funds to be practical in the choices. If you go practical, aesthetic is probably least of your priority and if you want both, that's personal preference
you dont need to upgrade the motherboard if it were amd
This case was created by a content creator, it was inspired by the motherboard shown in the vid and it's basically a personal project, so it was made only for these specific hardware. if he really wants an upgrade he would just design a new case
That was very satisfying to hear. I really liked the sound of the metal.
Isn't this that crazy compact pc i saw on LTT? This thing is insane, great job!
Let's admit that it looks quite aesthetically pleasing and original. As for the cooling of the processor and the exhaust of a hot air stream, then there will be troubles.
It looks like you could cook eggs on it.
🤍🤍🤍🤍🤍