@waffanCC Nice job, looks amazing I want to do the front bumper and lights, grill And so on, Is it possible for you to send a link to where to buy it? Best regards
Ive got a brabus w211 and i recently bought a vito just for the rear seats abd was going to scrap it because it looks ruff however underneath its absolutely mint so now im think do i resurect it and make it look like a brabus one to sit next to my car 😂 i think with the state uts in it would make a great video. Yours is stunning
Thank you! 🙏🏻 By the sounds of it, it might be worth saving and like you said, it would make a great video and it’s a video I would happily watch 😊 By the way, Mercedes W211 is my fav shape E class. I’m still looking for an E55AMG Designo but it’s been 7 years and I still haven’t found one. A brabus W211 is a very rare car to see on the road!
@Sam_AMG hopefully I remember to start videoing if I do. I usually get stuck in then realise my mistake. And the w211 is my favourite e class too. I used to have a silver e55 many moons ago. Absolutely loved it. Its the reason I bought the brabus but unfortunately that was stolen and turned back up written off. The brabus is off the road currently as needs the gearbox swapping. It's the 722.6 5g one. I lost my unit so it's been sat in the car park awaiting nicer weather so I can get cracking. Today she finally went up in the air today. I've never done one of these gearbox so it will all be new to me. Anyways great work on yours bud. Do you still own it or did you part ways ?
@@MacijPolishFighter oh no I didn't get offended! I would have loved to get it that cheap and I knew what you meant.. Like you said the V6 is more expensive and the 2.1 would have been cheaper but I wanted some power too 😁. I've been told stage one remap takes this engines to 265bhp which would be nice
@@Sam_AMG HI Sam, did you go for a remap? I have a 2012 122cdi with 115k on clock, wondered how you got on! Also im fitting new bumper to mine, but need the grill, do you know what other merc models grills will fit?
Hi guys, i have problems with my viano w639 after i installed the eibach springs -3cm on front.. The car doesnt respons good and keep tracking to the left while driving.. ive been several times for the geometric but still doesnt solve the problem. Where should i look for?
Thank you! Yes, everything just bolts on. For the facelift conversion you'll need 2 front wings, front wings inner plastic arches, front grill, headlamps and front bumper. You'll also need adaptors for the headlamps, I bought the adaptors from Germany, if you want I can find the link for you or if you have a good electrician he'll know how to connect the old loom with the new headlamps.
@@angelaburman6179 you don't need any of those parts. The only thing you need are, front wings with the inner plastic mud guards, front headlamps with the adaptors, front grill and front bumper.
Hola buenas me podrías pasar el enlace para los adaptadores de las fichas de los faros estoy también haciendo el restilyng pero no encuentro lo de los faros
awesome job my friend. May i ask, have 20" wheels caused you any problems? like rubbing? or too rough of a ride? Where I live the roads are not great, so I am a bit worried about going with 20". What is the offset of those 20" Brabus wheels? Did you use spacers?
Thank you! I had to cut the wheel arch liners slightly as they would rub on full lock. I don’t remember the offset of the wheels, sorry. The ride was still great, if anything, it was better than before because with the eibach springs there wasn’t body roll like before
Hello, I never loaded the van. I done it up as I was going to open a detailing business but it didn't happen and I then sold the van. The wheels would turn fully without rubbing. The tyre sizes were 255/35/20 at the front but I did try 245/40/20 as well and that size also worked. If anything, the 245/40 filled the arches a bit more if you don't plan to lower the van. Mine was lowered and either of this sizes worked
Looks awesome🫡 I have the same shape Vito always wanted to know the size of the wheels I can put on my 2012
@waffanCC
Nice job, looks amazing
I want to do the front bumper and lights, grill And so on,
Is it possible for you to send a link to where to buy it?
Best regards
Ive got a brabus w211 and i recently bought a vito just for the rear seats abd was going to scrap it because it looks ruff however underneath its absolutely mint so now im think do i resurect it and make it look like a brabus one to sit next to my car 😂 i think with the state uts in it would make a great video. Yours is stunning
Thank you! 🙏🏻
By the sounds of it, it might be worth saving and like you said, it would make a great video and it’s a video I would happily watch 😊
By the way, Mercedes W211 is my fav shape E class. I’m still looking for an E55AMG Designo but it’s been 7 years and I still haven’t found one. A brabus W211 is a very rare car to see on the road!
@Sam_AMG hopefully I remember to start videoing if I do. I usually get stuck in then realise my mistake. And the w211 is my favourite e class too. I used to have a silver e55 many moons ago. Absolutely loved it. Its the reason I bought the brabus but unfortunately that was stolen and turned back up written off. The brabus is off the road currently as needs the gearbox swapping. It's the 722.6 5g one. I lost my unit so it's been sat in the car park awaiting nicer weather so I can get cracking. Today she finally went up in the air today. I've never done one of these gearbox so it will all be new to me. Anyways great work on yours bud. Do you still own it or did you part ways ?
Don't forget rearview mirror
Great work, from a £2,000 looking van up to £9K.
Thank you!
I wish I paid £2k! 🙂 I paid £7000 for the van plus modding it. It has costed about £12000 in total
@@Sam_AMG Sorry I didn't consider that this is a V6 CDI in mint condition. But you get the point :) Good work !
@@MacijPolishFighter oh no I didn't get offended! I would have loved to get it that cheap and I knew what you meant.. Like you said the V6 is more expensive and the 2.1 would have been cheaper but I wanted some power too 😁. I've been told stage one remap takes this engines to 265bhp which would be nice
@@Sam_AMG HI Sam, did you go for a remap? I have a 2012 122cdi with 115k on clock, wondered how you got on! Also im fitting new bumper to mine, but need the grill, do you know what other merc models grills will fit?
Hi guys, i have problems with my viano w639 after i installed the eibach springs -3cm on front..
The car doesnt respons good and keep tracking to the left while driving.. ive been several times for the geometric but still doesnt solve the problem.
Where should i look for?
Very nice done !! Did the fenders fit inmediatly fitted? Any points where to pay attension when do a conversion?
Thank you!
Sorry just seen this comment. Yes the fenders bolted straight on. The only thing you need is the wiring adapter for the facelift headlamps
Question can the W639 be upgraded to the W447?
Good job with your ur conversion!
Thank you!
There is a conversion kit but I don’t think it looks very good in my opinion
@@Sam_AMG hi Sam, I wouldn't mind checking it out... Please share a link if you can... Gracias 🙏
Awesome work !
Am I correct to assume that the facelift parts are plug& play? Consisting of front fenders, lights and bumper?
Thank you!
Yes, everything just bolts on. For the facelift conversion you'll need 2 front wings, front wings inner plastic arches, front grill, headlamps and front bumper.
You'll also need adaptors for the headlamps, I bought the adaptors from Germany, if you want I can find the link for you or if you have a good electrician he'll know how to connect the old loom with the new headlamps.
@@Sam_AMG hi, in the kits available they always show slam/front panel and bumper rienforcement, are these really need to do conversion ? thanks
@@angelaburman6179 you don't need any of those parts. The only thing you need are, front wings with the inner plastic mud guards, front headlamps with the adaptors, front grill and front bumper.
Hola buenas me podrías pasar el enlace para los adaptadores de las fichas de los faros estoy también haciendo el restilyng pero no encuentro lo de los faros
awesome job my friend. May i ask, have 20" wheels caused you any problems? like rubbing? or too rough of a ride? Where I live the roads are not great, so I am a bit worried about going with 20".
What is the offset of those 20" Brabus wheels? Did you use spacers?
Thank you! I had to cut the wheel arch liners slightly as they would rub on full lock. I don’t remember the offset of the wheels, sorry. The ride was still great, if anything, it was better than before because with the eibach springs there wasn’t body roll like before
Che tipo di dischi freno hai usato?
Do you put load in your rear? Do your front tires turn all the way? What size is your rubber?
Hello,
I never loaded the van. I done it up as I was going to open a detailing business but it didn't happen and I then sold the van. The wheels would turn fully without rubbing. The tyre sizes were 255/35/20 at the front but I did try 245/40/20 as well and that size also worked. If anything, the 245/40 filled the arches a bit more if you don't plan to lower the van. Mine was lowered and either of this sizes worked
Thanks Sam for your time! Nice ride!
@@Sam_AMG hello I just buy a van like this and I can’t find any info What kind of wheels I put it on,Maybe you remebere max et and j ????