Good communication ur an english about bsnl divise kerala hardware o n c port fiber cable tv operator r j eleven with phone connected make the calls in and out lan is out local net work lan two connect wire and wireless home page of divise laptop and mobile automatically ip address got google dpc net work configuration page ip address seen very good explanation about technical support brother and very well said I m watching full and I will be share this video to my yt family and my relatives friends 🙏
பெரியவர்களுக்கான சமையலையும் செய்து காட்டி பின்பு சிறுவர்களுக்கான சின்னச்சின்ன பானைகளில் சமையல் செய்து செய்து காட்டி அதன் பின்பு டெக்னிக்கல் ரீதியாகவும் ஒரு அருமையான பதிவிட்டமைக்கு வாழ்த்துக்கள் 💐
Thank you for sharing.. I tried in my iphone using the wave lite app as mentioned in the video and followed the same steps..but I am gettin ng 404 not found error when calling, plz assist
Q1.Have u configured the ont as mentioned in this video Q2. Do you have DBC ONT? Q3. Did u try from other android mobile. If not can u try Q4. Can u try from laptop Answer for these questions will help to find the issue .. can you please try those...
A lot of Thanks to you for giving voip configuration through mobile. It helped me a lot. I am also able to make bsnl ftth landline call through mobile.
On windows SIP is working using Zoiper5 but same config doesn't work on android phone using GS Wave or Zoiper. It gives error connection timed out. What changes we need to make while using SIP on mobile?
I configured everything which u have told in this video, VOIP status is also showing registered. But still not able to connect SIP UDP in Zoiper. Any help !!!
For people who have calls getting established but unable to hear voice, its an issue on the BSNL side of incorrectly configuring their NAT rewrite rules, the IP address of a non existent/inaccessible server is sent as the RTP server for voice during the SIP handshake, its pretty silly on their part, if you can capture the IP packets you can verify this information - but why would a customer know all this information and a service provider ignorant of BASIC NAT rewrite or it may be the ignorance and incomepetence of TATA communication whom I believe looks after the back end servers on contract. When you raise a complaint - they close it automatically after n number of days - atleast in good old days of copper wire the line man used to call and ask whether its resolved.
Muthuvel anna, superb video. can you explain why I can receive calls into my landline but not able to make outgoing calls? I am unable to fix that problem.
Sorry Aravind.. I don't have idea about jio as I haven't experienced..bsnl is good for me ..I. am using 50 Mbps speed..had 3 or 4 times line issue for few hours in 1 year...so good for me and in my location I don't have any other options other than bsnl 😁
@@muthuvelk7036 i saw , u said last configured device will get , I think Its only between Laptop and phone , the analog phone will always get incoming and outgoing calls right !?
@@premkxksorry that I was not clear..No. analog phone, laptop, mobile all are same.. your device (laptop/pc/mobile/analog physical phone( connected directly to ONT)) that you lastly used for outgoing call will get incoming call. So you may use multiple device to make outgoing but incoming will be received by the device that is used for last outgoing call.. that includes physical analog phone and even hard ip phone
Fiber optic cable is managed by local operator which I do not have any idea. DBC ONT model number is "IGD" "Hardware Version V1.0" . ONT price was rs2300.00 a year ago. Installation charges various based on local cable operator. could be Free/Rs500.00/1000.00/1500.00 so on.. ONT configuration , you can use this video
Thanks for the detailed video. Using the steps mentioned in this video I am able make and receive calls on my laptop using Zoiper but the same settings are working on GS Wave. Account doesn't turn green and hence unable to use it on phone! Any thing needs to be changed while using SIP on android phone?
@@muthuvelk7036 After trying lot of things I was able to make calls using zoiper android app. But only first call after connecting to internet gets successful. Rest all calls have one way audio issues (no incoming voice). To overcome this issue I have reconnect internet or restart zoiper services. Any solution to this problem?
@@SiddhuS212 I talked to my service provider for same issue. My service provider given a different vlan ID and DHCP setting.new IMS options will be.but problems I have 295 series no. It doesn't work for this. Bad luck.
broo am facing another problem that is when i connect my laptop or phone for caling my internet stop working .. plzz tell me the solution that both phone as well as internet work together....
@@prakhargupta34 actually after doing as in video my FXS indicator is out and when I call to landline number it says out of order before it was all fine
Appreciate the effort made here but it would have been better if you had scripted the steps and then illustrated them. Jumbled words made me more confused then helping.
Sooper👌. Bro, I have old bsnl modem router dslw200-sy. Its working and not in use. I want to configure to make it as a REPEATER. Not as switch or access point, where I connect cable from primary to bsnl dslw200. I want dslw200 to plug somewhere within range of primary wifi to boost signals. Please help 🙏🙏 Edit: I don't know if this model router supports my goal. But can we achieve this by updating firmware or something?
Nicely explained 👍 I have a question if I configure Voip service on my mobile phone will I stop getting calls on my telephone that is connected to the RJ11 port on the ONT?
i am using binitech modem i dont find such option like u said in video kindly help.. my viop is registered but line status is idle landline is not working
Hi , is it possible to register multiple devices? . When I trying to add mobile I'm getting "registered failed sip:bsnl" error. Is it because I have a landline registered to the voice server?
@@BeeWaks Are u getting voice when connecting a physical POTS phone to the router? I have a weird issue similar to yours, I have 2 set of FTTH one of them works as expected, second one the VoIP registers etc but voice is heard only when I make outgoing calls, incoming calls gets disconnected as soon as its answered. Local BSNL can't help, call center automatically closes complaint after 5 days.
I followed all the steps mentioned as such; except for one modification - I'm given a static IP for voice by BSNL. So instead of DHCP, I used the Static Mode. After setting up Voice, the WAN Info shows it as 'Enable' and 'up'. I'm able to ping to 10.187.7.12 from CMD as well. After this I added the 10.0.0.0 and updated the routing table as well. However, in Zoiper SIP UDP fails as "Not Found". Double-checked everything else you've mentioned. No ports are binded as well.
Dude I want to use the same connection provided from my isp from being away from home (Not connected to the home network) is it possible for me to do so?
Thanks for doing the work for BSNL :) I have the same box as yours, my voip status is registered on the box @ Status->VoIP Information. However when I try to ping 10.187.7.12 all packets are lost from 192.168.1.2, basically no route from my computer. My ONT's voip page has listed this as a SIP server address however when I ping from my computer its not going through. In your video you are showing that you can ping the sip server from your computer even before you add a route on the ONT. I am not able to ping even after adding the route on ONT. Can you let me know whether you have added any static routes on your PC
update: when I add the route on the ONT device, the route gets added to the list at the bottom, but when I click show routes it was not appearing on the routing table. Hence I decided to delete the added route, which went away only after a reboot. Then when I add the route now, it is not even listing at the bottom
Final update: It is working - add route - zoiper will say CONTINUE to say UDP is not working however when you register it registers and you can make a call
@@varnamq3 Excellent.. Finally you made it.. I have latest firmware which i got from DBC helpdesk. My only concern when I reboot ONT it is not in routing table however i can see in route section so i need to click the added 10.0.0.0 route and click "update" 3 times to brings that in to route table.. I dont reboot ONT so it is ok for me..
Dude do you know the Destination IP and Netmask for the voice connection of Meghbela broadband, Their customer support have no clue when I ask them these stuffs
31 Like. Wow Really awesome. It's so nice and helpful video. Fantastic work. I really like it. Thank you so much for sharing. Have a great day my friend
Hey I have the same BSNL connection I am not able to connect my smart bulb to my bsnl router 2.4 GHz But the same bulb is connecting easily to my Jio dongle. Can U help me with this? Do I need to make any changes in wifi setting in order to make it connect to wipro smart bulb💡
I tried everything as told by you, but it's not working. But SIP UDP is still failing in Zoiper. Any suggestion?? Is there a way to contact you personally??
Hi I am facing a problem with one side audio. Account settings shows green tick. But I try to make a call, I cant hear other side sound. Can you help me to solving this problem?
Hi, I am unable to ping SIP server despite following all the steps as per the video however, I can ping my default internet voice gateway address. Can you help to identify the issue?
followed the steps and configured everything. I'm able to make/receive calls on mobile & laptop. But i couldn't hear anything. No voice
Good communication ur an english about bsnl divise kerala hardware o n c port fiber cable tv operator r j eleven with phone connected make the calls in and out lan is out local net work lan two connect wire and wireless home page of divise laptop and mobile automatically ip address got google dpc net work configuration page ip address seen very good explanation about technical support brother and very well said I m watching full and I will be share this video to my yt family and my relatives friends 🙏
Can we add multiple devices to same number and use as parallel calling?
பெரியவர்களுக்கான சமையலையும் செய்து காட்டி பின்பு சிறுவர்களுக்கான சின்னச்சின்ன பானைகளில் சமையல் செய்து செய்து காட்டி அதன் பின்பு டெக்னிக்கல் ரீதியாகவும் ஒரு அருமையான பதிவிட்டமைக்கு வாழ்த்துக்கள் 💐
Can I use same configuration for grandstream ip phone? And how to make international VoIP calls?
Very different upload 👌watched full-time. Thanks for your effort and time. Amazing work.
keep going sister 👏
Can we use landline and mobile simultaneously with the new profile created?
Do you know where to get landline account password .
@@youtubepremium8289 I am also confused
Is it necessary to connect lan cable to laptop through router or we can do wirelessly
Thank you for sharing.. I tried in my iphone using the wave lite app as mentioned in the video and followed the same steps..but I am gettin ng 404 not found error when calling, plz assist
Q1.Have u configured the ont as mentioned in this video
Q2. Do you have DBC ONT?
Q3. Did u try from other android mobile. If not can u try
Q4. Can u try from laptop
Answer for these questions will help to find the issue
.. can you please try those...
Please install pingtools app and try to ping sip server IP using ping option..404 is basically app is not.able to reach the server..
@@muthuvelk7036 I am using DBC and followed the same provided in video with Android mobile also but same error
@@muthuvelk7036 and I want to use this in mobile alone not in laptop
@@sivanandhamkandasamy143 let's check as discussed in call...don't bind any ports for both voice and data wan interfaces
A lot of Thanks to you for giving voip configuration through mobile. It helped me a lot. I am also able to make bsnl ftth landline call through mobile.
Will you share your configuration
Do not bind any port for internet and voice
Make sure your voip configuration on ont status is registered, then go for sip configuration on mobile. Every things will be ok
Thank you for your comment which makes others to try in right way
On windows SIP is working using Zoiper5 but same config doesn't work on android phone using GS Wave or Zoiper. It gives error connection timed out. What changes we need to make while using SIP on mobile?
Good video. Pls make a video on how to use this ONT in bridge mode with a branded router.
I have been trying to work it out for a long time..now all credits goes to you.. thank you bro
Welcome
Are u configuration successful
@@muthuvelk7036 will this work with revo and syrotech router?
How can i find the SIP IPv4 server. Please help
தமிழ்ல போடுங்கண்ணே ... We always welcome it. Please do it as soon as possible... Thanks for your valuable video.
போட்டுடலாம் தம்பி 🙏🙏🙏விரைவில்
Is it possible to connect 1 laptop + 1landline + 1mobile simultaneously.
Need help I wanna connect lapto + landline parallelly at once.
ஆங்கிலம் எனக்கு புரியவில்லை இருந்தாலும் காணொளியை முழுமையாக பார்த்தேன் சகோதரி
Your Voice is nice and your work too.
Thank you sir🙏
I am not getting sound during call. What might be the problem as I am using a IP phone.
Which type of loan cable should I use with syrotech🤔
I configured everything which u have told in this video, VOIP status is also showing registered. But still not able to connect SIP UDP in Zoiper. Any help !!!
Something is wrong with the port number in my case. What should I do now?
For people who have calls getting established but unable to hear voice, its an issue on the BSNL side of incorrectly configuring their NAT rewrite rules, the IP address of a non existent/inaccessible server is sent as the RTP server for voice during the SIP handshake, its pretty silly on their part, if you can capture the IP packets you can verify this information - but why would a customer know all this information and a service provider ignorant of BASIC NAT rewrite or it may be the ignorance and incomepetence of TATA communication whom I believe looks after the back end servers on contract. When you raise a complaint - they close it automatically after n number of days - atleast in good old days of copper wire the line man used to call and ask whether its resolved.
The way of explanation is too gud Anna........ Thank u for sharing this useful information
Thanks da...created for my friends request ..🙏
Thank u so much dr❤️🙏🙏💗
Very good sir.appreciate your work
Can make videos how to configure sip account in xiaomi default dialer app with out usin zoiper app
bro i have a doubt can v make a cal through mobile phone by using landline number.. i am using binitech router neenga solra option not thr
I have ont router without phone slot in it, simple dbc ont router with fibre and wan port, will this work or we need ont router with phone port?
From where did you get the SIP server up?!
Muthuvel anna, superb video. can you explain why I can receive calls into my landline but not able to make outgoing calls? I am unable to fix that problem.
Hi, Which Fibernet is good performance? JIO Fibernet (prepaid) or BSNL Fibernet (postpaid) ?
Sorry Aravind.. I don't have idea about jio as I haven't experienced..bsnl is good for me ..I. am using 50 Mbps speed..had 3 or 4 times line issue for few hours in 1 year...so good for me and in my location I don't have any other options other than bsnl 😁
@@muthuvelk7036 ok sir 👍
@@aravindselvaraj1867 welcome brother
Jio best with low ping
Thanx bro ..I m already having working analog phone with this , now If I configure in phone also , do I get incoming calls in Phone only or both !?
Hi Prem, please watch end of this video .I have mentioned the same... See the description "some notes to know"
@@muthuvelk7036 i saw , u said last configured device will get , I think Its only between Laptop and phone , the analog phone will always get incoming and outgoing calls right !?
@@premkxksorry that I was not clear..No. analog phone, laptop, mobile all are same.. your device (laptop/pc/mobile/analog physical phone( connected directly to ONT)) that you lastly used for outgoing call will get incoming call. So you may use multiple device to make outgoing but incoming will be received by the device that is used for last outgoing call.. that includes physical analog phone and even hard ip phone
@@muthuvelk7036 i got the point
hi , your video is very informative,
but in my cases it not succeeded, so can you help me to fix my problem?
What type of fiber optic cable brand used for outer drop out and modem model No kindly update price with installation charges
Fiber optic cable is managed by local operator which I do not have any idea. DBC ONT model number is "IGD" "Hardware Version V1.0" . ONT price was rs2300.00 a year ago. Installation charges various based on local cable operator. could be Free/Rs500.00/1000.00/1500.00 so on.. ONT configuration , you can use this video
@@muthuvelk7036 Thanks for your valuable response feedback concern for detail information 👍🙏
Thanks for the detailed video. Using the steps mentioned in this video I am able make and receive calls on my laptop using Zoiper but the same settings are working on GS Wave. Account doesn't turn green and hence unable to use it on phone! Any thing needs to be changed while using SIP on android phone?
Have you followed all the steps specified in this video for Android.like port number etc..
@@muthuvelk7036 After trying lot of things I was able to make calls using zoiper android app. But only first call after connecting to internet gets successful. Rest all calls have one way audio issues (no incoming voice). To overcome this issue I have reconnect internet or restart zoiper services. Any solution to this problem?
@@SiddhuS212 same issue
@@SiddhuS212 I talked to my service provider for same issue. My service provider given a different vlan ID and DHCP setting.new IMS options will be.but problems I have 295 series no. It doesn't work for this. Bad luck.
Sir.. what password should we use for line 1 on VoIP page. ?
Very nice useful sharing 👍👍👍
Thank u so much ga friend 🙏
For those who cannot ping their voice server, try turning off all port bindings on internet as well as voice in network tab on router login page
broo am facing another problem that is when i connect my laptop or phone for caling my internet stop working .. plzz tell me the solution that both phone as well as internet work together....
@@MohitYadav-yd1ut May be router and firewall issues.
Thank you so much. After spending good amount of time I am able to enable calling on mobile.
May i have your help
yes
@@prakhargupta34 actually after doing as in video my FXS indicator is out and when I call to landline number it says out of order before it was all fine
@@pgbalaji Are you be able to call with physical landline phone?
@@prakhargupta34 nope after try out it all went block
Appreciate the effort made here but it would have been better if you had scripted the steps and then illustrated them. Jumbled words made me more confused then helping.
SIR PLESE MAKE A COMPLE VIDEO IN GS WAVE , IN MY POT PORT IN ONT ROUTER I USE TELIPHONE BUT GSWAVE IS NOT WORK IN MY HUWAEI ONT MODEM HOW TO CONFIGURE
Sir, My ONT interface is different.. I am not able to configure the SIP ,, please help me.
please email your mobile number .. we will work on it.. yalcookingchannel@gmail.com
you can try creating voice WAN interface one by one of the possible given connection type in your ONT. like internet/voice/voice_internet etc...
can use syrotech modem as wifi range extender wireless?
plzz help me out . what is sip server and port number for haryana ftth bsnl
Sooper👌.
Bro, I have old bsnl modem router dslw200-sy. Its working and not in use. I want to configure to make it as a REPEATER. Not as switch or access point, where I connect cable from primary to bsnl dslw200. I want dslw200 to plug somewhere within range of primary wifi to boost signals. Please help 🙏🙏
Edit:
I don't know if this model router supports my goal. But can we achieve this by updating firmware or something?
Configured on mobile but not getting any voice. But landline working fine.
Can u make a video on registration of bsnl selfcare portal please🙏
Very informative , could you also share a similar settings for Alphion router
Nice sharing 👍 stay connected👍👍👍
Is it possible to enable simultaneous use of landline phone and SIP through mobile phone/laptop?
Nice sharing dear
Nicely explained 👍
I have a question if I configure Voip service on my mobile phone will I stop getting calls on my telephone that is connected to the RJ11 port on the ONT?
Yes it will stop
@@Sanchsuraj For what reason will it stop?
i am using binitech modem i dont find such option like u said in video kindly help.. my viop is registered but line status is idle
landline is not working
Ping to 10.187.7.12 works, but could not connect using Zapier. Configured the routing entry as per video.
Hi , is it possible to register multiple devices? . When I trying to add mobile I'm getting "registered failed sip:bsnl" error. Is it because I have a landline registered to the voice server?
Can we configure Airtel voip in same way?
which DNS to use the google one or BSNL any cast for faster speeds ?
I would say Google
This video is actually more useful than the ones posted by Kerala Tripleplay
Thanks a lot...
I can now make calls to any number from SIP, but I could not make the voice to work, no sound at both ends :P
@@BeeWaks sip under ALG should be enabled in ont and proxy ip in app should be entered in all.pls check that
yes i already did that, calls in and out are fine, but no voice 😂 may be its the router... idk what else to suspect
@@BeeWaks Are u getting voice when connecting a physical POTS phone to the router? I have a weird issue similar to yours, I have 2 set of FTTH one of them works as expected, second one the VoIP registers etc but voice is heard only when I make outgoing calls, incoming calls gets disconnected as soon as its answered. Local BSNL can't help, call center automatically closes complaint after 5 days.
Sir, I couldn't able to connect the SIP UDP in zoiper5. I have followed ur instructions even though I didn't do. Kindly help me to connect
Generally it's TCP ip 5060.
Very nice sharing friend, useful upload.
I followed all the steps mentioned as such; except for one modification - I'm given a static IP for voice by BSNL. So instead of DHCP, I used the Static Mode.
After setting up Voice, the WAN Info shows it as 'Enable' and 'up'. I'm able to ping to 10.187.7.12 from CMD as well. After this I added the 10.0.0.0 and updated the routing table as well.
However, in Zoiper SIP UDP fails as "Not Found". Double-checked everything else you've mentioned. No ports are binded as well.
I tried in static and did not work out. DHCP is enabled in BSNL .. pls give try with DHCP option
@@muthuvelk7036 With DHCP option, IP is not getting assigned to voice. It is in 'INIT' status only.
@@microg5139 so are you calling from mobile now using fibrenet ?
@@muthuvelk7036 can you tell me how to know your vlan id from bsnl?
Hi the sip server is reachable from router but not reachable from phone or laptop please help
can the same method be used for BSNL wings?
Yah. You can try.
@@EMTMZ tried it out. It works quite well.
Why don't you use stock Android SIP dialer?
Dude I want to use the same connection provided from my isp from being away from home (Not connected to the home network) is it possible for me to do so?
Then we dont need sim cards😃😃
Great explanation!!
Thanks a lot 🙏
Thank you
Please Help as I'm unable to Find Domain Sip Server Number
Thanks for doing the work for BSNL :) I have the same box as yours, my voip status is registered on the box @ Status->VoIP Information. However when I try to ping 10.187.7.12 all packets are lost from 192.168.1.2, basically no route from my computer. My ONT's voip page has listed this as a SIP server address however when I ping from my computer its not going through. In your video you are showing that you can ping the sip server from your computer even before you add a route on the ONT. I am not able to ping even after adding the route on ONT. Can you let me know whether you have added any static routes on your PC
update: when I add the route on the ONT device, the route gets added to the list at the bottom, but when I click show routes it was not appearing on the routing table. Hence I decided to delete the added route, which went away only after a reboot. Then when I add the route now, it is not even listing at the bottom
For any one else who is viewing this from NON cooking channels the subnet mask in the static route has to 255.0.0.0 and not as shown in the video
After adding the static route, I can ping the SIP server but still sip UDP data is not recognised using zoiper5
Final update: It is working - add route - zoiper will say CONTINUE to say UDP is not working however when you register it registers and you can make a call
@@varnamq3 Excellent.. Finally you made it.. I have latest firmware which i got from DBC helpdesk. My only concern when I reboot ONT it is not in routing table however i can see in route section so i need to click the added 10.0.0.0 route and click "update" 3 times to brings that in to route table.. I dont reboot ONT so it is ok for me..
Very informative sharing..superb 👌
the laptop connected through wifi or lan?
Amazing video and stay connected😊😊
Bro in my router sip address not in number it's like a email how do I know the address?
very useful and helpful sharing, lk 25
Thank u friend 🙏
Great upload thanks for sharing 👍
Dude do you know the Destination IP and Netmask for the voice connection of Meghbela broadband, Their customer support have no clue when I ask them these stuffs
They are just customer care they do not know the network engineering.
Can I make or receive calls using GS app on my mobile phone when I am not at home?
No
Very useful and informative about voip
Thank u 🙏
Can I do this airtel Xtreme too?
i was not ale to add a ten network manually. after following tvideo, making all changes, finally there is no change in the table
31 Like. Wow Really awesome. It's so nice and helpful video. Fantastic work. I really like it. Thank you so much for sharing. Have a great day my friend
Useful information for all, thanks for sharing
Like 33 Nice sharing..... Stay connected
Hey I have the same BSNL connection
I am not able to connect my smart bulb to my bsnl router 2.4 GHz
But the same bulb is connecting easily to my Jio dongle.
Can U help me with this?
Do I need to make any changes in wifi setting in order to make it connect to wipro smart bulb💡
same
not working, grandstream shows 404 error when dialing
It working for me in DBC ont
@@muthuvelk7036 how can you setup mine plz .
@@asadvice4660 I just did the steps as per video.. some times I need to update route to routing table..nothing else...
@@muthuvelk7036 can you do the setup.
By taking my pc on remote please.
👍 thanks 🙏 finally working
I tried everything as told by you, but it's not working. But SIP UDP is still failing in Zoiper. Any suggestion?? Is there a way to contact you personally??
Nice video
Thank you for sharing
Stay connected
Thank u friend 🙏
Wow nice information super
Great sharing👌
Useful video
Thanks 💕👌
So no need to contact landline device
How to setup sip server?? From Tamilnadu
I think this guy is a network engineer 👍😅
Hi I am facing a problem with one side audio. Account settings shows green tick. But I try to make a call, I cant hear other side sound. Can you help me to solving this problem?
Same problem
@@captainfedric2934 I was updated firmware and the problem was solved.
Bro I have done same process as yours. But still sip UDP not found😭
Hi, I am unable to ping SIP server despite following all the steps as per the video however, I can ping my default internet voice gateway address. Can you help to identify the issue?
Did you solve it? I have the same problem.
Great upload
Thanks for sharing
Stay connected ❤️
Hi I was able to make calls but from my part the audio is not working
Informative & Interesting
Thank u ga 🙏
Useful information dear thanks for sharing
Very nice sis
Nice explanation
Thank u friend 🙏
I tried but couldn’t get success
Can you help me
Very nice useful vedio❤️🌺❤️🌺