Easy Trick For Removing IPHONE 5 U2 IC
HTML-код
- Опубликовано: 8 сен 2014
- In this video we are using a simple but effective method to remove and replace U2 of iPhone 5.
First apply some heat and scratch the glue around IC,then take a soldiering iron with big bite and some extra led on it. Place the on IC and left it from bottom with the of a sharp and flat tool.
Next clean the extra led and glue carefully,with full of patience,place the new IC in a proper position and direction.take care of the processor or CPU besides it,because this lead to damage your phone. So cover it and apply heat just like showed in the video.
Thanks for watching our videos. For more updates subscribe our channel. Наука
Works super easy as in video. Cleaning the board and re placing the chip is no problem when removed like this. Thanks!!
awsome professional, cool just to sit and watch you work.
A professional, made this look easy without and heat tape and very confident, good 1 st class video thanks colin from Surrey
It's crazy, man. You Monster!!!
سلام الله عليكم و رحمة الله تعالى وبركاته اخي رحمان اشكرك شكرا جزيﻻ على هده تلمعلومات الطيب اخي الكريم ماهو اقوى مضاد للفيروسات تلفون سمسونج كلكس س4 ارجوا الإجابة بسرعة وشكرا
Still easier than removing this U2 songs.
+Fap Damage Damn U2 songs! lol
Hi.. Thanks for posting.. i will be carrying out this repair shorty... can I ask, how do you know what orientation the new chip should be placed? Many Thanks, Paul
Hi there, really like this video. not sure if that is the audio chip or not cause i am new to this but it is something id really like to try. I know it is risky etc etc...
What i was wondering was what sort of tools you used? like i could see a heat gun and a soldering iron but i was wondering what kind? and does the type matter as much or would any brand work? also what you did to clean the pcb?
I think you do really slick work man and i agree with someone else about a video where you talk with instructions and your own tips for how to do this.
thanks for the upload.
great videos!! very helpful!!
please tell me, what temperature do you use in hot air gun?
Very tricky! But still amazing!
your video is simply spectacular but I doubt that temperature and air flow using the heat gun?
You are good , please explain while doing the job .
You are great!!! Nice soldering. To what temperature do you work with the soldering station?
buena tecnica hermano. saludos desde cd. juarez chihuahua mexico
Tats some great work man.. bro my phone is getting heated up..and my battery is dying too fast even without using.. is it because of the u2?? should I replace it..
liked you video, do you know where is u2 ic for iphone 5s?
what video recorder you using?
Thanks for the video. It was very technical but please, can you explain the steps and tools you used. I think it will be helpful in term of understanding the whole process. Great video, carry on good work.
estan profecinal sus videos ...esperando tambiem los trasduscan en español....gracias
Repairing Tips superb. Thanks
Ashfaq, could you tell me what temperatures you use for the heat gun and the soldering tip please?
I have tried without any success...
Great Video!
Hello! What pins are you shorting with the tweezers to turn the phone on?
Hello, great job.
How did you find out that this U2 is malfunctioning? Service manual?, test points+scope?
(take my question in a general sense, not for this particular case)
Thanks Deep for This Video :)
Bro u just the man! can u tell me online what is the right temperature to remove a IC ? how many Celsius u leave the hot air?
Cool video, I would love to see how you clean the pcb.
Thanks great job , where do you buy these components?
congratulation for come back in youtube
first whit hot gun after whit thinner because check the apple 6 chip its clean already:)
very good job! please tell me which temperature was the hot air station.
Neat...never seen that trick!
hey thank you for your time and effort to put this together kinda makes me feel like "if you can do it i can do it" but i need someone to point me to the right direction i dont want to end up replacing 5 things lol QUESTION: Would this solve my iPhone 5c water damage battery drain even when is powered off problem?
Those asking for cleaning the PCB? seriusly guy this video is to guide your way to complete the replacement...after all if you dont know how to clean it dont bother to start fixing PCB for your own sake. cleaning the PCB? how can that question pop here my goodness.
What is the liquid that you put on the U2 ic in the minute 5:36?
Good work
Hello! Do you know where can i buy those chips for replacement?
deep fix ..
what type of soldering iron is that .That you take ic from mother board ..
Could you tell us what kind of temp. yu are using for your soldering iron and also for the heat gun?
impressive skill, congrats
you my friend is one skilled technician . how do you know that each board is fitted correctly without missing any of the pins , or even messing them with overheating , i'd love to learn your tricks
That temperura use to weld with air, graces
GOD bless man can you make a video removing the A6 proccessor in iphone 5
what is is temperature of the iron for removing the protector of the a6 and u2 ic? @deepfix
hi.. how much temperature hot air gun you have set for desolder grid metallic ?
Great work. Over here, no one would care to repair a board like this because the time/labour cost would be higher than putting in a new board or replacing the whole phone
+nrdesign1991 unless someone has priceless photos on their phone they need saved..
vary useful tip , good job ,
well done.great job.
Hello,
Nice video.
What temperature you use with your blower to remove the shield ?
I have an iPhone 5 which itself off, is that the replacement of the ic U2 can solve this probleme ? Now i can't get it to start.
What a pro!
I like the part what it said" يرجى اعادة تعبئة رصيدك" hahaha
Thanks for sharing!
Which hot air rework station do you use?
what temperature do you use on the hot fan
you are the best
where to buy a set of chips?
Did you reball New ic with leaded balls or did you use The non leaded balls?
Regards
puts,vc é o melhor mesmo
It's easy when you've done this many times, no heat tape used and a professional, what heat setting his your heat blower on and the tip size please 👍👏
What is the liquid he used towards the end? Is it silicon gel that he heated to hold the chip in place?
what paste you used b4 heating new IC ?
Very interesting video, great work. where are you located so that we can give you business for such repalirs
hey Deep thank you for the vid. think you can install a A9 chip in iphone 5 or impossible?
No you can not ..
salam, how do you clean the pcb board and which flux you use?
AOA brother mashallah its amazing how you make it look so easy but anyone who has ever tried to replace an IC knows how difficult this job can be and you make it seem effortless, koodo's for that......question: what temperature is you're heat gun set at brother?
Good job, well done.
i removed the chip without knowing which side it was. can you help please?
hello friend , I would like sanasse my doubts , my iphone 5 not this calling or when the charger plugs , already checked the software , however unsuccessfully , after opening saw the battery was discharged then gave shock to the battery and carried until reaching 3.7V after plugging the battery saw that the bass processor A6 where will this component heated up very much , letting the hot battery too, then quickly despluguei battery certainly Load Ic U2 circuit is shorted correct (remember that was the only component that reheated in the mother board )
Thanks dude...
عاشت ايدك فعلا خدعة روووووووووووووووووعة
amazing yarr good work
Hi I hope you help me to find solution for my case that’s recovery’s mode in iPhone 4
Can I extract the Mimori and put it in another iPhone 4 without losing anything if possible some tips routings waiting for you to reply and thank you very much
Hola, ¿cual hay que sustituir para cambiar el usuario de icloud en un iphone 5C ?
Is there any way to put an A7 or A8 processor in the 4S?
very good my friend , thanks
What camera did you use pls?
salaam, what glue do you use after you have heated the new ic and put it in? that brown glue, what is it?
What heat degrees do you use?
Km darajt harara enta este5dam?
فنان يا وديع
Hey)) you are the best!!)
Thank you but I'm not the best
can u plz tell the zoom camera which is used here
nicely done man that looks like some steady handed shit just bought a 5G for £20 an I'll bet my bollocks this is what's up with it cheers 4 the vid
Hello! What tools I need for this repair, and what is the name of glue?
mashallah keep good working!
impressive!
hi there, what is the best flux to use on iphone bga repair. I dont want bad stuff from china thats poison. Any suggestions? Thank you.
what temperature use?
Hi,
I have an iPhone SE which is not turning on after connecting it to an unauthorized charger when the battery was empty.
Replacing the battery should bring it back to life , at least until the battery is drained, even if it has a faulty U2 IC, right?
Already tried replacing the battery and the LCD.
Please help. Desperate for answers!!
Nice video! Can you tell us how did you turn on the phone without the power button tank you!!
the put the tweezer in the section ground and and the first pin that connect the power button section
thanks!!
Hi Whats the name of the paste flux and whats the shelf life of it.?
Hi.
Can you please tell me if it is the same problem when there is a constant 230mA current draw from the battery when the phone is turned off? It is an iPhone 5.
(the phone also keeps rebooting after about 1-2 minutes)
Thanks.
Can you change the A6 chip?
شكرا اخي ولكن هل الكاويه المستخدمه اثناء رفع الايسي مختلفة عن التي نستخدمها
ارجو التوضيح
which smd gun you used sir?
Can I upgrade my iPod touch 5g from slow a5 to a6?
Hi, thanks for your video.... to me the most important is to know where you can i buy the parts for iphone.... like ic and memory chip???????
AliXpress is your best bet
may i know what glue should i use when i remove the ic
what kind of glue u use?
Assalam walekum bhai nice work
very good................
can you help me what is the meaning the U2 IC, and can repair at what harm iphone
what is the temperature of hot air when soldering back new U2 chip?
actually now here is IC mounting machine for smart phone and iPad which can help remove and assemble IC, and for temperature already set that make repair more easy and convenient.
jenny can we marry pls
Nice
Ashfaq how do you test PMU with multimeter if its bad or not please reply soon
If you change the u2 chip on iphone 5s how can you be sure that it wont fail again in ablut 2-3 months or it will go on about 2 years ?
heatgun heat for iphone boeard plz ?