With the cover on you have to remove the rocker shaft to pull a few of the injectors. With the cover off it’s easy access to all 6. So whichever is simpler to remove in the chassis you’re working on. Either 9 times out of 10 one of them has to come off and this guys info is all bad. He reinstalled injector without evacuating cylinder. His information on torquing the hold downs was wrong.
Worst way to install the injector. No evacuation. No cleaning of the bore. You don’t go back and forth tightening the hold down bolts. You tighten the exhaust side first until it’s seated then torque the inlet side.
Looks easy when you take off the lower cover. Was hoping to see you do it with that on
With the cover on you have to remove the rocker shaft to pull a few of the injectors. With the cover off it’s easy access to all 6. So whichever is simpler to remove in the chassis you’re working on. Either 9 times out of 10 one of them has to come off and this guys info is all bad. He reinstalled injector without evacuating cylinder. His information on torquing the hold downs was wrong.
Worst way to install the injector. No evacuation. No cleaning of the bore. You don’t go back and forth tightening the hold down bolts. You tighten the exhaust side first until it’s seated then torque the inlet side.
As you said exhaust first. This is where the manual is helpful.
Hi good morning
Is there any way tobrelease oil o fuel pressure to chsnge fuel injector ?
Hello for everbody! I have injector 1830691 for c7 engine and i don't know is it fit for c7 engine
How many o ring come in it and whether there is a small o rang or not
What is the name of the injector lever lock.?
Thank. For inf
Otima dica valeu gringo
Kool
Bravo