What NOT to do in an Excavator | Heavy Equipment Operator Training
HTML-код
- Опубликовано: 5 ноя 2019
- Excavator Training | Excavator Operation - Today we are covering what NOT to do in an Excavator. We cover the 5 basic mistakes we see from new operators regarding counter weight, squaring up to your tracks, trenching, loading and parking. Have a question or comment? Leave them below!
Related Videos:
Excavator Beginner Training: bit.ly/excavator101
Excavator Training Start to Finish: bit.ly/2NHMLCY
Komatsu PC210 info: bit.ly/3bsE9Ka
Notice: The views stated herein are those of Extreme Sandbox and/or the applicable individual only, and do not necessarily reflect the views of Komatsu or its personnel.
^^^^^^^SUBSCRIBE TO OUR CHANNEL^^^^^^
Heavy Metal Learning is designed to provide educational content on how to operate heavy equipment; a forum for operators and industry supporters to share their knowledge; an opportunity to get out in the field; and ultimately inspiring the next generation. Heavy Metal Learning is a strong advocate for bridging the skills gap as well as seeing the need for quality instructional content on heavy equipment.
Check out our website: www.heavymetallearning.com
Contact us: info@heavymetallearning.com 
Развлечения
I've been operating for almost 28 years! I've seen 4 accidents 1 was fatal! 3 very important points to consider when swinging. 1. Always keep your eyes 4 to 6 feet ahead of the bucket when swinging. This will enable you to see any danger before the bucket hits the object. #2, when possible, raise your bucket at least 6 feet above ground or higher than the tallest person on the site. In case someone walk by, you at least swing over them! I.e., it is also not good to swing over anyone head if possible!! #3 If you hear someone call out or a horn, stop and identify if that person or horn is directed at you before you move the machine. I work in sewer and water main, bulking, digging basement, road work, and more. Different ways to move the machine safely.
Sound advice mate
Good man
What did you start your career off as, like when you finished school and got certified what was your next step that you took?
@@darioguerrero4374 I attend university obtain a teaching degree in history and language. The history they want me to teach was all a lie. I always love machine, I didn't receive any formal machine training to become a machine operator! I started out using a front end loader to pick up scrap lumber after the carpenter finish building homes. After work I ask the operator to let me use the machine casting dirt. That how I get started.
Gday Guys.
Been an Operator/ Quarry Manager / Quarry Supervisor and National trainer/assessor for an Australian company called Boral for all of my working life.
Great vids and very good communication style used to express what your trying to convey here.
Well done guys.
As an operator of 20 years, two mistakes I always see new operators make are not leveling a place for the excavator to sit before working. And one that is a safety concern is to always look where your going before moving. Working water and sewer in residential areas where people/children are always courious what you are doing, looking first could save a life.
Good tips...thanks for sharing!
Yep, been there. Reminds me of a good point. If you dig a ditch you want your machine level so the ditch banks are straight up and down.
I ran excavators for 38 years before I retired. Saw the old cable machines fazed out as the hydraulics took over. One thing lots of guys never look for is the newer machines with the quick couplers. That coupler adds quite a bit of length to the stick. I've seen many machines damaged from operators getting to close to the cab with the bucket and driving the teeth right into it. Saw one idiot almost take his head off with a 400 Yutani with a 17 foot stick come into the cab, panic, hoisted up and took the top off like a sardine can. Always check spec sheets on the length of the arm and if there could be contact with the cab. Just my 2 cent.
Totally agree...I’ve come close to making that mistake myself. Thanks for the comment!
Are you sure he just didn't want a Convertible
Thanks ruclips.net/video/NQEV7CaFt5U/видео.html
Thought you were going to say I use to operate the brontosaurus like Fred Flintstone.
I just want to add my opinion on tip #4. When digging a trench, I have been taught to swing to the right (blind side) to place your spill pile. That way you have a full view of the ditch and the people in it while swinging back to dig. Sometimes it's out of the question, but its good practice for when you do have the option.
That's an excellent point. I have never heard that before but makes complete sense. I may have to add this to the "more than one way to skin a cat" list. Appreciate you sharing your insight!
I was taught this same thing by my stepdad.
And you can bring your pipe manholes in on the left keep the loader from trying to jump piles to get close enough the only time it's a pain is digging laterials you have one how digging main line and the backfill hoe digs laterials don't over load where the laterials are that only slows down production more pipe more money happy owner
Very true. Was a lucky escape for me looking into the trench while the machine was swinging left to offload but then he is blind to the trench on the way back hence almost took my head off when resuming the dig..!! Both of us were at fault. My head should not have been there and he should have known I was at that side of the trench.
Or you could turn the machine around and swing left like your supposed to
Having the idlers in front also has a really serious reason, if you have travel sticks and something comes into the cab by accident ( tree branches etc.) the machine will walk away from the hazard! If your working reverse and a tree or demo material come in thru the front of the machine, the travel sticks will push you into a certain death crush! It happens!!! Just be aware when doing demo or clearing forests!
I've heard this before, and I guess it's a valid concern but I just feel like that's a very remote probability. I guess if you were using one of these in a forestry application than absolutely, but don't most of the forestry excavators have cages in front of the glass for that very reason. I guess, safety first so never a bad strategy when safety is in play. Thanks for the comment!
If you have your drive motors up front you're also pulling the slack of the tracks in which is excess wear on the tracks and potential for a loose track to slip off.
I had a close one. Triying to pic a rock out of the sea and as it came up on the teeth nearly throw it throw the frunt windo and if it had it would have sent me tracking out to see 😂
Holy shit
@@HeavyMetalLearning yea it's really common that there's a cage or the glass is really thick almost bulletproof but people still use ones without any safety cages like your komatsu and then it's a valid concern.
Misjudging the swing radius and hitting the foreman's personal truck is a bad one. :-)
Yes...yes that would be very bad! Hopefully you’re not speaking from personal experience!
I didn't do it. ;-)
Honest, he didn't do it I saw him...
Personal experience ????
Closing the foreman's open door on his pickup .is also a bad one .the guy running the machine bent the door all the way to the front bumper .needless to say he was fired on the spot .but it was kinda funny .lol
A very important thing to remember is not to carry the boom boom to high. Not only can you hit overhead lines, but it changes the center of gravity and can make the machine unstable on uneven terrain or during loading/unloading operations.
Thanks for the comment!
Why am I watching this I make cheese for a living and I am on lunch right now.
Thanks a lot...now I want cheese!!!!
Maybe one day you will make so much cheese you need one of these dudes to move the wheel around.
Haha
You think big
That's why
"Blessed are the cheese makers!" (Life of Brian.)
1. Dig with the idlers towards the hole to prevent wear on the undercarriage. When you pull against the dig, there is a tremendous amount of force against the front of your tracks. Idlers have less wear surface and are easier and cheaper to replace than sprockets. 2. Pile your spoils farther away than you think you need to. Dirt expands and you don't want that pile near your excavation.
I'm an operator at a local scrap yard the biggest mistake I see most of the time is the other operator doesn't pay attention to everything around him when he's operating and he never parks it square plus the other thing I see is people coming up on the machine without getting the attention of the operator
Great list of Mistakes listed by experienced operators below! One that I've recently seen, was parking the Excavator overnight to close to the newly opened/unfinished trench and later that evening heavy downpour and the machine slid in on it's side. My takeaway from that one is park at a decent distance away from it. Thanks for everyone's tips...going to be useful, I'm just starting out and this is gold!
Wow...that would suck...thanks for the comment!
I’m guessing for a new operator that’s great advice,but after 37 years of operating I’ve seen my share of stupid things.??
I've got a compact track loader, and I've just ordered a mini excavator. I've never used one before, but have many projects on my residential property. Your videos are terrific, gives me a lot to think about. Maybe the best advice of all I've gleaned is to simply SLOW DOWN. Thumbs up!
I own 3 a mini midi & crawler. All different in how they operate and what you can and cannot do safely with them. I’m also self taught no online training resources available when I started. After safety the #1 item for me is how to be efficient without over stressing the equipment. I fix them too, so my logic is to try to wear my operators cap more than my mechanics cap I find slower is better for both longevity and efficiency, learn to plan and plan to learn, every job is unique. Biggest complaint is working along side operators who can’t hear anything over the tunes they’ve got cranked at full volume. Being audibly blind is not a great plan even when solo.
Mistake I see is them not watching this video . Awesome and informative thank you
Thanks for the comment!
I requested a vid like this a few months ago having purchased my first excavator. Looking forward to "What NOT to do - Vol. 2"
Like to also see excavator safety in things other than digging, like tree removal, lifting, other non-digging things.
Good call....thanks for the comment!
Number one mistake i would have in the list is mixing soils. Keep the black dirt separate from the clay, separate from the spoil. And I think you kind of covered my other choice, but not stressed enough.. ALWAYS, always, always be aware of your surroundings. Accidents happen and people can get killed.
Excellent advice...thanks for sharing!
Very informative video. Thank you.
I work in a limestone quarry and here are a few mistakes that I see operators doing:
Komatsu PC 490 loading haul trucks from a 90 degree angle. Tracks being perpendicular to the rear of a haul truck.
End of shift coming off a 20 to 25 foot pad and descending more or less a vertical drop instead of putting material in front to descend.
Have a great day.
Thanks for the comment!
"descending more or less a vertical drop"- Stunt Excavator operator!
Hey, thanks for this video.
I know that for old hands, it's probably a no-brainer, but for a fresh beginner, it's really informative.
Thanks again, and greetings from Melbourne, Australia.
I’m a new Excavator operator and I think this video will help me more. Thanks particularly to Mr. Randy, Am a fan of you
Those are extremely minor "Top mistakes". Mine would be:
- Swinging with a loaded bucket over a cab of a truck
- Not locking out the controls if someone is hooking up to your bucket
- Working too close to an unstable face
- Not using a spotter when working close to power lines
- Overloading the machine when lifting, especially in soft conditions
Thanks for sharing your tips...appreciate it!
Did them all just this summer. Bc I don't complain, I get all the nasty jobs.
VHM good points sir!
Digging with tracks side on*
I agree with you on those points for sure
(1) hitting counter weight- -- operator must have a spotter , (2) digging side ways off your tracks, you don't grab a full bucket to where you lift your track, pull your trench 6" -8" at a time. I sometimes dig like that due to maybe 5' to 8' wide trench. I go side to side to keep my edges clean and straight. (3) trenching in layers I agree and at a 45° angle. so your teeth will cut into the material. depends ground material. the deeper you go, bench or slope. 4' deep 2' bench. (4) loading, yes always swing left, but always have a spotter in front of your machine at a safe distance, in case someone is approaching spotter will give you the sign to stop until all clear. your spotter is very important. especially if your digging around live lines..... (5) parking... not line with tracks.. turn right about 2' on your bucket. easy step off and more space to step off to. I've been operating for over 30 years. I'm not perfect still learn a thing or two every day. have fun on your equipment but remember..... SAFTEY TAKES YOU HOME!!
Excellent advice! Thank you for sharing!
Not more wages sorry
a spotter? at all times? never seen anybody do that... grade man, yeah. or if it's something where you need somebody there watching. but somebody just standing there, watching you dig, all day.
I've never operated an excavator with a spotter outside of lifting or when I worked as a diesel mechanic with dozens of new machines, ordinarily the spotter would just get in the way.
Another thing to add to the under carriage set up in excavating is that the idler to the front also has a recoil spring in case of tracks being hit.. and another thing... in the case of an emergency and you need to get back out of the line of danger pulling back on the pedals will move the machine back as long as the drive motor is to the rear as mentioned when operating ...
cool videos man... HELLO FROM IRELAND
One mistake is hitting a track shoe with the bucket and breaking it. That happens sometimes.
Thanks for the comment!
Me too..Sometimes i didnt realize it while digging deep into soil/rocks.Greetings from Malaysia..
Been operating 25 years and I've never done that. You must be a shit operator.
@@simonchant761 its a shame your still running mini’s after 25 yrs/ maybe you can sneak on a bit bigger machine while the regular average operators are all off on corona so you can experience it for yourself .Blowhole !
That’s more of an accident
I'm still training and I like this instructor 😊
I've just started using an excavator and I think some of your tips are really useful. Thanks foraling the video.
You're welcome...thanks for the comment!
Thanks for teaching us 👍 I love excavators and now I will take the cpcs license(happy)
Thanks for the comment!
This channel is so helpful and I'm grateful of you for every single videos.
I been operagging over 40 years and you are right very helpful never thought of a lot of this
The way you share your knowledge really inspires. Thank you and very big thanks to all of your team.
Thank you! Appreciate that comment!
Have no wasted motion. Be fluid in your actions. Decide where you're going before you make the move to get there. It's a sure tell to see an operator swing back to the cut to then reach out to begin the next pull while having nothing obstructing their ability to preset the necessary bucket position while in swing on the return from spoil.
Thanks for the comment!
This is a big one I try to preach to new operators. As you’re coming around have that bucket ready to take the next cut. Nobody wants to see one motion at a Time
That's the difference between about operator & a want to be ,I was doing that move when I was learning on a three stick Case and on a excavator it's so easy
..
@@leeheard9922
I started back in 1961 on Draglines then Liebherr 360. 700/750/900. (Their first Hydraulic models). Have your full width of cut set in your mind b4 lifting bucket off ground. Straight wall.(Hard ground) Battered walls to suit (soft ground.) and all between. Always dig over idlers. Swing.boom down. Muck pole out. Curl bucket to suit IT'S digging angle to whatever ground, b4 you get to place on ground where you starting.And know where /how wide to leave "berms" when you digging ground not ditches. So you not double digging over same ground.
IE leave space between digs that you go back to and get all the area in 2 or three passes, rther than chasing the dirt.
The bucket ANGLE as it hits the ground IS the most imprtant thing of any digging. Whether on Chains (draglines with 300ton bucket on ends of ,or a 10 ton Hydraulic digger.
Clam shells are another experience again. We used them for digging around laid, backfilled pipes or ""Bell holes" (square)" for welders joining sections..
And remember. A large. (Over 100ton bucket, full. weighs a LOT. curl /hold muckpole IN when hoisting mainboom as you swing up to side of dump truck. Then push it out to get over side or scowback. Curling bucket out as it goes over.
Have fun.
Personally, I much prefer Draglines. Soooooo much more skill and balance involved
but at 80 my eyes gone. Side casting/overeaching your stick with a 100 ton bucket on the end and NOT going too far to dig the teeth in is an experience. or as a crane. Walking a 100ton load on your hook with a Cat 10 or big Terrex dozer blade shackled to your ballast block to hold your arse down. Work safety didn't exist in those days. Just work done. I've seen a few dead. and legs/arms chopped off. mainly on CJB and Murphy Pipeline sections. Usually Swinging in overloaded welded sections of 36in line. to bellholes. A mile of pipe with 3 or 4 Sidebooms running along it trying to control the balance at the end.
Your site is my newest guilty pleasure. I was looking for videos of how to logging equipment when I found Heavy Metal Learning. Such fun.
Lol...glad you found us! But I don’t think you need to feel guilty!!! Lol
Brilliant tutorial for me as I am about to start working with a small excavator trenching, thanks 👍
When iv given it a go operating an excavator to get a feel of them i also have made the mistake of bucket fully extended and trying to dig too much at once. Some good tips here for next time i get into one, bucket at 45degrres and scape of smaller layers.
Also noticed the bucket alone can do the dig if positioned well firstly, i found myself trying to do too much at once, eg, curling bucket while lifting and curling the two boom arms, too much at once lol
I'm software engineer but I love watching this coz I always wanted to drive one of these big machines one day!
Definitely should come out to one of the Extreme Sandbox sites. MN and TX, you can get to operate one!
I bought a mini, very fun to dig with. It really makes you think about how much power even the small machines have. Some of the chunks I pull out with my mini are 200+ pounds, and it does it with ease. I can only imagine what its like running these full size units.
I have just started to learn the skills but most the mistakes that we do, are general due to the instructors and as i looked into this video is amazing, i am picking things thoughtfully.
Thanks for the comment!
Just starting to learn thankyou for the advice
Good video very informative, you demonstrated it very well.
Thanks for the comment!
ExtremeSandbox your welcome.
I love the tip on having the drive motors to the back never really thought much of that. One thing I do when working on large rock piles I have the drive motors to the front, backing over the pile pulls the rocks to the idler wheel and keeps them from jamming in or by the drive motor.
thanks for the comment
I grew up on cable backhoes such as a Bucyrus 22-B. With those you kept your drive sprockets to the front. When you travelled forward (away from your trebch) your tracks and drive chains stayed flat on the bottom and it was easier on the machine. If you learned to operate on a cable hoe, in my opinion, it made you a better operator.
I always dig over the sprockets on my machines.
On my 21 tonner especially. If you’re heading down the kind of places I go the coil springs allow the idlers to spring in and out . Wearing things out quicker . The track then goes tight and slack .
Also when travelling up hills always have the idlers up the hill . That way the full weight of the machine is pushing the drive sprockets into the chain . Less chance of track jump .
I was always told good operators never take their hands off the sticks .
Use foot pedals all the time . Even loading onto low loaders .
Everyone’s got their ideas but In all the years I’ve owned worked machines , know the way I’d operate them .
These are some good tips for new operators and even some who were not trained properly. Another simple tip is to look down before exiting the machine. Stepping on a loose rock or piece can cause you to twist or sprain an ankle or you could step on or into something undesirable.
Excellent advice...thanks for sharing!
I'd be really interested to see some videos on issues that come sometimes when you have to work in far less than ideal situations.
Thanks for these videos; I was just thinking of going for a license.
You're welcome. Thanks for the comment!
@@HeavyMetalLearning Do I need some sort of license to rent one for use on my property?
Love the videos, i really enjoy watching them and hope to somehow learn how to operate a backhoe at somepoint
Glad you like them!
Really good vids for beginning operators! Thanks.
Glad you like them!
Super control over that machine bro I'm an excavator operator of a 320 DL long boom respect from Guyana great video
Thanks for the comment!
Glad I found this channel. Thank you for your time in making the videos. Would love one day to operate an Excavator!!
Thanks for watching!
Hello, I'm following your videos here in Brazil, I'm a Heavy Machine operator.
Thanks for the videos! have a blessed day!
Great video. I'm renting a larger than mini tomorrow. Will be rubber track. This really helped. I will be on flat ground in the woods. So swinging into trees is what I will have to watch out for.
Thx again!
Just found this channel.
Helpful and informative. Exactly what I was looking for to supplement school.
Awesome to hear....thanks for the comment!
Digging in layers of 6-12 inches will help trench wall stay stable
Good day,
One of the most important things i keep in mind since my work area is generally always in steep country is my drive motors always in the rear or down hill when digging, traveling or most any other actions because it is very hard on the drives if pulling uphill in reverse. Especially if tracks are a little loose or sprocket is worn. Thanks. Another is walking away from machine with the bucket left up in air.
Troy
Thanks for sharing!
I'm interested in becoming an excavator operator, and while the video here is awesome instructional material, the comments are a great wealth of knowledge. I'm looking forward to finding a way into the industry.
On point #2. One of the most important reasons for having your drives at the rear is in a panic situation your levers/pedals are correct for direction of travel. When your turned around your levers are reversed. Split seconds can make a difference as we all know. Also you need to be wearing your seatbelt at all times, even during training videos!!!
Sorry but I’m not waring a seatbelt in my excavator,if and I say that very cautiously if I was ever in a position that I needed to get out of my excavator and f**king seatbelt is not going to slow me down.!!!!
When _you're_ turned around your levers are reversed.
Never turn in reverse, you're more likely to through a track. Always turn forwards.
Im a new operator and i first found it difficult to work the pedals and the sticks at the same time takes a lot of practice
Yup...as with anything...practice makes perfect!
I’ll get ya right cuz. Come work onside me.
These videos are absolutely incredible.
Thanks. About to get a little PC18MR-3 to play around clearing my scrubby 7 acres in retirement. Bit slopey but not too bad I hope. Had one play with the salesman on slope , only time ive been in a machine, so hungry in searching for all and every tip. Appreciate your help. Pete in Tasmania
Hi from Texas - had to give a thumbs up for the snow =)
Yup...thanks for the comment!
The biggest problem I see recently is that the younger guys are refusing to learn how to run the machine and relying too much on automation and gps.
Thanks for the comment!
We call those shitheads on jobsites
@@razorsharp6120 no, us "old timers" simply don't need it.
Josh spot on ,a good eye is a rare thing these days ,
Love excavators. My old man had trucks bobcats and small excavators before he retired. He is 76 now and working again on an excavator. Operates with one arm as he always has. Only machine he ever owned I struggled with was the grader. Did my head in.
I have a interesting excavators and I learned from you thank you Mike Sacramento.
You’re welcome...thanks for the comment!
Nice video, you cover the basics very well, I wanted to add a couple things, first is personal preference, I like to, is circumstances permit, nose left track into a bucket of dirt, leave machine turned just enough to step out on the track and walk down the track and dirt pile, I used to jump off a track as a young fella, not any more.
Second, if your in an a earthquake prone area, leave the arm extended out all the way, this lowers the center of gravity some and a point of contact might prevent the machine tipping or sinking out of sight due to soil liquifacation
don't know for sure if that works but a guy I worked for in Alaska said it did in the 64 Easter 9.0 quake.
Thanks for the tips!
6: Do whatever you have to with the excavator, to avoid digging a grave by hand 😄⚰️
I feel ya brotherrr❤️❤️❤️❤️💪🏻
Great video, thanks much.
Very helpful. Thank you sir.
Typically, I tend to notice the little things. Finesse not force. Precision then speed. Pattern, rhythm, consistency, machine placement is key. Machine placement dictates entirely its ability. Know when you leave your cut to spoil where you're coming back to grab another bite. It's always a tell when I see an operator searching for their next bucket.
Good points
Any machine, operated efficiently, will almost seem alive.
Yes. This comment is gold. Know where you’re headed before you get there!
It would be good to see a "What not to do with an excavator video" that explains what can damage or shorten the life of an excavator. Great videos thanks!
I like that idea...definitely will see if we can do that!
@@HeavyMetalLearning Great, look forward to it
This is the most helpful comment section I've seen so far. Thx guys. 👍
Very educational video thanks for sharing.👍
Great ideals to aim for when operating! What year is that Komatsu? It’s a awesome looking machine
Thanks. That is a 2017 unit. We love our Komatsu!
I agree with your teaching points. I teach Army Engineers and have a couple of extra tips. When trenching, prior to doing the first layer cut, do what I call a ghost run. That is a pull just above the ground. The reason for this is you may have a marked trench line and you can check you are inline. Second tip is don't place the spoil two feet away. Always take into account the Angle of Repose and the Zone of Influence. You should place the spoil at least 45 degrees away from the invert of the trench. This lessens the chance of a trench collapse.
These are excellent points...thanks for sharing!
Thanks
Great advice, nice info.
Not having toilet paper in the cab for when you need to squeeze out a shit.
Didnt your mother teach you to wear a t shirt under your regular shirt for the day!!! It serves so many purposes!!! 😉
Lmao
actually, shop towels make the best tp... and you ALWAYS keep a box. no matter how careful you are with grease, it still gets everywhere. and obviously, they're handy for so much more. like electrical tape and zip ties/bailing wire. any operator worth a damn oughta have all of em.
So i took a class for this right... And let me tell you ive got more info watching your videos then the course I took. I mean clearly explained. Thank you. Amd the comments too i mean i operated a few different ones but i same concept. Thank you.
Awesome to hear....thanks for the comment!
Very informative, thank you sir
Now I can apply for License 😉, so easily explained
My counterweight is scratched up from working in very tight spaces. Sometimes you have to do what you have to do to get the job done.
Same, our counterweights get scratched up from tree branches. I usually snap them off but the homeowners freak out. One time a client was getting upset with us for not wanting to drive a machine through an area unless the trees were cut back. He said it wont scratch the machine. I told him ill test his theory by rubbing a tree ranch against his car... he shut up after that.
It happens...but key is to know BEFORE it happens, so if you are in a tight space it is understandable as long as you are planning for it to happen.
Yep, been in many tight spots.
@Kimmo Piirainen no scratches on my Cat 375 counterweight either. However, the heavy carriage bolted to it does. It holds 3 pair of large crusher jaws and 1 pair small to offset 84 ft of boom, stick, and bucket. It's been drawing a crowd in the pit I'm working in. Was thinking of selling ing tickets, ha ha.
@@anthonythorp7291 That's certainly not always a bad thing by any means. Lol
Thank you for your thoughts on these. I would like to give you a couple of fairly common errors I've run into with newbies. first and foremost for me is incorrect fuel. More time than enough guys are told to fuel the machine at the end of the day, go to the first tank they see and fill it full of gas. Another operator starts the morning shift, does his checks, starts the machine and you know what happens. I've seen this 5 time in my 45 years operating. The last may be more of a pet peeve is guys not cleaning their track out. I live and work in frozen country 6 months of the years, froze up mess in the tracks is an issue! Cheers, Billy in B.C., Canada
Excellent points...thanks for sharing!
Oh yeah i clean my tracks at lunch time and at the end of the day especially in the winter time. 8 months of winter where im at.
@Billy proctor how would you suggest someone becoming an operator in BC?
Sounds like they don't know diesel from gasoline
To be an operator get richer first
Thanks for the video. I learned a lot from you
Thanks for this lesson
My pleasure!
Interesting stuff! Greetings from Scotland.
Thanks for the comment!
Yes it’s harder to dig off the side however when you live where I live (Pennsylvania) we do a lot of work where we have to work off the side you for example when your laying rip rap (for those who don’t know rip rap is large rocks or Boulders that are laid on a stream bank to prevent erosion of the streams bank) you are forced to work off the side, so to prevent the digging with the stick out, we dig as close to ourselves as possible to keep the weight of the machine balanced
Thanks for the comment
Good video, thanks for sharing!
Thanks for the comment!
Thank you for your shering
Extreme Sandbox, you say digging when fully squared with drives under the counterweight won't let you lift the back of the machine under most conditions. Letsdig18 does this quite often while digging up tree roots, and lifting trees he has pushed over. While the setup does make it less likely there are many times the job will have the needed punch to actually do so.
Ohhh...it will absolutely still lift the machine however still way more stable when squared to your tracks. Love Letsdig...he definitely has way more experience than me so always great to learn from an even more experienced operator.
He said it's less likely dumbass. I've had the tracks of an 80 ton machine 6 feet in the air trying to get frost to pop.
Man I’m so excited to get into being a heavy equipment operator. Been applying to the operators union in illinois and haven’t received anything yet! Going to apply again in 2021
Good luck man. Also could just look for a smaller operator and get on a shovel. Got to start somewhere!
Regrettably your local union will not risk putting someone in the machine with limited or no expierience, the exposure to liability is off the charts, maybe try going non union to get some seat time
@Often Offends And _you're_ getting ahead of yourself calling yourself an operator.
Great lesson! And judging by the comments, it's cool that a bunch of people strive to develop
Great all very valid points
Great video! any recommendations for those looking to learn these skill sets part time while working full time. I'm in the Los Angeles area and really would love to learn heavy Equip Op.
Thanks for the comment. Tough to do part-time but I’m sure there’s a way. I would maybe try and find a smaller local landscape or excavation company and see if you could do some part-time work with them. Depending on your skillset, prob would start as a laborer but I’m sure could work in some stick time eventually.
@@HeavyMetalLearning thank you for the prompt response! I'll see what I can find.
20,000 plus hours on excavators and the biggest problem i have is people driving / walking up to the machine on the blind side, inside the swing area. I have crunched 2 vehicles because people have done that ( then they abused the crap out of me) i tell people, if you're gunna come see me, pull up on the left way out there and make sure i've seen you before you approach.
Wait...you crunched vehicles? Accident or on purpose???
Good advice on all points. Be nice if all operators had this much common sense
3rd time I've watched this video very informative great help can't wait to start I'm confident
I see a lot of new operators racking the buckets and sticks to full extension. That beats those bushings all to pieces and puts a lot of unneeded wear on the machine.
Good point...thanks for the comment!
@@HeavyMetalLearning Any time love your instructional vids I share them with new operators on my jobsites to help them get better and more proficient at their jobs. Thank you for the resources you provide.
@@smokethornburg4780 Love reading comments like this! Glad that we are able to help. Keep offering tips and tricks, that definitely helps others!
Positioning of tracks is very important in trenching or digging deep holes. You should always have your final drives in the rare and your idlers in the front. For emergency purposes of the machine falling in the hole. Operating is all muscle memory and if something happens you will automatically push backwards, if you have the tracks the wrong way you will drive yourself into the hole.
Good advice...thanks for the comment!
Your final drives are at the back to save the sprockets and so the drives take less abuse. If you are falling into your hole you should probably watch more videos on operating hoes.
Awesome tips,thanks!
You’re welcome
Very good thanks.
Welcome!
Close your doors and windows when you leave your machine.
Your water truck driver will appreciate it.
& you might avoid flooding your cab.
Agreed!
Good video, I have several thousand hours on an excavator, when parking especially in built up areas always park with your bucket all the way open and your arm out, that way vandals cant damage your bucket ram after hours, just a tip for anyone who is interested.
Was taught to make sure to park up with as little of the rams showing. The other thing was to grease up before parking up and everything was warm
I always had some sort of equipment and I’ve learnt a long time ago, anyone can dig a hole, it’s items like this that will make you so much better.
Great job thank you
You're welcome!