This helps me a lot, even for not native English, the steps are clear and convenience to follow. Thanks a lot Mr. Scott! This channel is underrated and deserve to gain more subscribers.
Im going through all of these videos for my new job as they want me to do a bit of Proteus work alongside my electrical schematics, just want to say a big thanks to you Scott this is so helpful.
@@ScottCard haha.. still a mission for a newbee, trying to make a template for a microchip Icd3 target board programming socket, will have to start again after a bunch of practice.
Thanks for the video. My question is about the final 3d appearance. I was looking at making an ic socket where an ic like ag3524 will be plugged in. But the 3d layout here appears like the ic itself is what you created. How can I make the switch
There are three ways to deal with the 3d portion: 1) import the file as package from Snap EDA or Synaptics 2) Create or locate the CAD model and import it as an IGS or STP model 3)use the text based creator. For your switch, I would recommend solution #2.
You can import the part directly from SamacSys but I will try to make a video soon on importing the SPICE model. The main issue is finding models that are compatible with Proteus. I will update you once I have something. ;)
Nice useful tutorial. Sir: Can you please create a tutorial how to create a custom component which We can use for simulation?? I will be very very helpful.
The default is through hole when you choose parts that have the correct pad style. When making parts, be sure that the pad has the correct diameter and pad size according to the datasheet.
Good afternoon, my name is Eugene. Please help me with my educational work in the PROTEUS program. In my project, there is a remote control with three buttons: 1. Short start. 2. Start 3. Stop. Each button consists of three contacts (common, normally closed, normally open). I was able to make a remote with one button and pass the simulation perfectly, but I can’t even get two buttons. I did on the basis of the switch (SW-SPDT-MOM). Please help me with my project. Your video is very useful, I need to build a lot of prints and a lot of contacts.
If this is a set of industrial controlles, I usually use the button. They can latch as NO or NC. I then use the switch to simulate things like a toggle. From what you are describing, these would be integrated into a set of contractors. There are relays in Proteus that work for this. Hope this helps, sorry for the late response.
We do not usually do this but, you could place a package (not a compoant) and connect the pins using track mode. This is not recommended however as you should first make your schematic.
Be sure that the footprint is associated with the part and...there is a part iddentifier (eg. U1). Otherwise, the part will be ommited from the PCB and BoM. Hope this helps!
Unfortunately, the only simulation library I know of if the one that comes with Proteus. You can add models from manufactures but, it is not easy and often does not work. You can ask Labcenter to create a model but, that often takes a long time if they decide to include it. What I will often do is to pick a similar model for simulation, then substitute it for the part I want. like the MAX4326. I do have a video planned for simulation but it is a big one and I need to do more research before I make it. support.labcenter.com/forums/ forums.ni.com/t5/Multisim-and-Ultiboard/Adding-SPICE-model-for-TLV3501-Issues/td-p/3683020
@@ScottCard My sensor is from Renesas Company , FS2012-1100-NG model. Actually I do not know which parts I need. ı just need to create the sensor order to do simutaion with hex file.
@@yesima8939 You can try something like a script. Here is a video on that but, this is an I2C device so, you may be better to use the I2C DEBUGGER. ruclips.net/video/zVxehuVZ39M/видео.html
This helps me a lot, even for not native English, the steps are clear and convenience to follow. Thanks a lot Mr. Scott!
This channel is underrated and deserve to gain more subscribers.
Thanks. So glad I was able to help. I appreciate the comment and praise. If you want to help, be sure to share and repost, it helps a lot. 😁
Im going through all of these videos for my new job as they want me to do a bit of Proteus work alongside my electrical schematics, just want to say a big thanks to you Scott this is so helpful.
That is great. I'm so glad it is a help! Good luck with the new job 👍 😀
Great tutorial. Easy to understand and follow. Thank you sir!
Glad to help!
@@ScottCard can u create a library of APDS9960 proximity gesture sensor
Cool part. I will try to use it for an example when I make the new version of this video.
Thank you very much sir! 🙏 Bless you sir❤
You are very welcome
Thank you, very useful!
I'm glad to help.
excellent explanation sir, easy to understand 👍
Thank you 😊
To the point and genuinely helpful, thanks so much!
😊 thanks!
you helped me very well..
Thank you. 😊 appreciate your comments!
Thanks man!
You are welcome. Thanks for the comment 👍
@ years ago, still useful, thank you
Thanks for the comment 👍
Best tutorial I have found so far on making a part. Ta..
Thank you for the comment 👍. I'm happy to help 😊
@@ScottCard haha.. still a mission for a newbee, trying to make a template for a microchip Icd3 target board programming socket, will have to start again after a bunch of practice.
Yes, restarting projects is a full time job it seems. haha!😜
Great!! Many thanks!
You are most welcome. A new, high definition version, is planned. Go Glad it helped.;)
Thank you sir
You are most welcome.
thank you, that was helpful.
Thanks for the comment. It is truly appreciated!
love it
Glad you liked it!
A new HD video to come soon. Comment for an update when available!
Thanks for the video.
My question is about the final 3d appearance. I was looking at making an ic socket where an ic like ag3524 will be plugged in. But the 3d layout here appears like the ic itself is what you created. How can I make the switch
There are three ways to deal with the 3d portion:
1) import the file as package from Snap EDA or Synaptics
2) Create or locate the CAD model and import it as an IGS or STP model
3)use the text based creator.
For your switch, I would recommend solution #2.
Check out the new video to address this.
ruclips.net/video/kFPv2XT-MIk/видео.html
hello sir
thank you for your share video
but I can't use 2d graphics cloud path mode to draw the same why?
That is interesting. Are you sure that you are making a closed path?
@@ScottCard yes teacher now i can you tool 2D graphics, thank
This a great video. I can never find information about adding a spice mode so that the part can simulate. Can you help ??
Video on that topic is coming but just have not got to it yet. Sorry, but I will post a link when I get to it.
@@ScottCard Thank you for your reply. Really do look forward to that one.
Hi I would like to create an LTC2449 ADC on proteus for my project as this component does not have a simulation model. Could you help?
You can import the part directly from SamacSys but I will try to make a video soon on importing the SPICE model. The main issue is finding models that are compatible with Proteus. I will update you once I have something. ;)
@@ScottCard Thank you for the reply I will try it
can i to create a electronic board (like arduino for example) thanks
Yes you can. As a matter of fact there should be one in the library for the Arduino.
Can I somehow put a circuit into that component so i can use it for simulation.
You can add a spice model, but another option could be to use a similar device and modify it. For example, use a generic opamp to build a specific ic.
@@ScottCard subcircuit did the job, thank you for your advice
@@coldguy you are welcome!
Nice useful tutorial.
Sir:
Can you please create a tutorial how to create a custom component which We can use for simulation??
I will be very very helpful.
Yes, soon. Not an easy topic and several solutions (some better than others).😏
Thanks you sir for your reply.
I have learned successful how to create a simulatable component.
But your tutorial is helped me a lot.
I have successfully created a component of TSOP 1738.
ruclips.net/video/vQ4Fq8B73Uw/видео.html
How can I design pcb using through hole technology (THT)
The default is through hole when you choose parts that have the correct pad style. When making parts, be sure that the pad has the correct diameter and pad size according to the datasheet.
Good afternoon, my name is Eugene.
Please help me with my educational work in the PROTEUS program.
In my project, there is a remote control with three buttons:
1. Short start.
2. Start
3. Stop.
Each button consists of three contacts (common, normally closed, normally open).
I was able to make a remote with one button and pass the simulation perfectly, but I can’t even get two buttons.
I did on the basis of the switch (SW-SPDT-MOM).
Please help me with my project.
Your video is very useful, I need to build a lot of prints and a lot of contacts.
If this is a set of industrial controlles, I usually use the button. They can latch as NO or NC. I then use the switch to simulate things like a toggle. From what you are describing, these would be integrated into a set of contractors. There are relays in Proteus that work for this. Hope this helps, sorry for the late response.
Can I just add a footprint in software parts ?
I am not sure what you mean. You can add footprints to schematic parts.
Sir can u tell me how to draw line in the pcb design and how to connect one ic to other ic direct in pcb layout??
We do not usually do this but, you could place a package (not a compoant) and connect the pins using track mode. This is not recommended however as you should first make your schematic.
I created a custom component but it doesnt appear into pcb layout any idea what might be the cause of it?
Be sure that the footprint is associated with the part and...there is a part iddentifier (eg. U1). Otherwise, the part will be ommited from the PCB and BoM. Hope this helps!
@@ScottCard may i have yr email address.
Sorry, I do not use email in this form. You can always join me on Titter at twitter.com/DguyThe
Many thanks. Skillful work .Please help. Where can I find downloadable Proteus component libraries eg TLV3501 simulation libraries
Unfortunately, the only simulation library I know of if the one that comes with Proteus. You can add models from manufactures but, it is not easy and often does not work. You can ask Labcenter to create a model but, that often takes a long time if they decide to include it. What I will often do is to pick a similar model for simulation, then substitute it for the part I want. like the MAX4326. I do have a video planned for simulation but it is a big one and I need to do more research before I make it.
support.labcenter.com/forums/
forums.ni.com/t5/Multisim-and-Ultiboard/Adding-SPICE-model-for-TLV3501-Issues/td-p/3683020
@@ScottCard Thanks for the quick response. I wish you a successful job from Hungary
Hi, I need to create a mass flow sensor for my project but I do not know how to create it for Poteus. Could you help me ?
*Proteus
I will try. Do you need the schematic, PCB, Simulation or all three. Do you have a part number?
@@ScottCard My sensor is from Renesas Company , FS2012-1100-NG model. Actually I do not know which parts I need. ı just need to create the sensor order to do simutaion with hex file.
If you could help me, I would be very appreciative and thank you for your fast response, sir.
@@yesima8939 You can try something like a script. Here is a video on that but, this is an I2C device so, you may be better to use the I2C DEBUGGER.
ruclips.net/video/zVxehuVZ39M/видео.html