⛵️How to build the Albatros 01 - ✅ Model ship building
HTML-код
- Опубликовано: 5 авг 2024
- #craft #craftwork #modelling
✅ Learn and enjoy building the OcCre Albatros.
Kit Albatros: www.occre.com/albatros.html
Join our beautiful community!
RUclips: / @occre
We begin the construction of the Albatros. A project in collaboration with: @AlexModeling 🤝
His first wooden ship.
Follow him:
RUclips: / alexmodeling
Facebook: / alexmodeling583
Did you know...
SCALE - 1:100
HEIGHT - 410 mm
WIDTH - 210 mm
LENGTH - 570 mm
Schooners were ships used for different purposes, including coastguard work and the control of smuggling along the coast, as well as carrying out the functions of a small warship.
See how, step by step, you can replicate a model down to the finest detail and faithful to the original ship. We invite you to let yourself get carried away and set up spaces for creative leisure in which you can enjoy this marvellous model ship.
Ideal for beginners in the world of ship modeling.
See how, step by step, you can replicate a model down to the finest detail and faithful to the original ship. We invite you to let yourself get carried away and set up spaces for creative leisure in which you can enjoy this marvellous model ship.
We hope you enjoy your hobby of naval modeling with this splendid model ship that will provide you with long periods of creative leisure.
To build this model it is recommended:
- Workshop Cabinet: www.occre.com/mueble-taller-p...
- Tools: www.occre.com/complementos/he...
- Paints OCOLORS: www.occre.com/complementos/pi...
- Pack dye + Varnish: www.occre.com/pack-tintes.html
#modelling #modelismonaval #kit #model #model #hobby #navalmodeling #naval Развлечения
Thank you so much for this video. I, too, love your attitude. These videos were incredibly helpful for me, a novice. Much appreciation! Blessings to you.
Thank you so much for your kind words!! :)
I cut some scrap lumber the same shape as the deck for the bulworks. This way I could bend the wood into shape without breaking it at the first opening ( had to order new ones as I broke them on the first attempt without a mold). Between light steaming and a heated plank bender, got a very good fit. I then fit the inner planking on the bulworks while it’s still in the mold-that way it kept the same shape.
I also did the same sort of mold for part 24- the curved piece at the stern.
Both ideas worked out great.
Hope this helps.
For a first timer on wooden ship models, you have a grate attitude and confidence in your approach. Keep it up and good luck.
First try
Hello Alex. I am following your Albatros build on your channel.
I have ordered the kit and will receive it the first week of january
2022😎
Oh!!! Great, you will enjoy it a lot 😉
A tip on the bulwark bending at 21:30 is to let the bulwark soak in hot water about 8 minutes, then use the side of a drinking cup or glass to gently bend the forward section until it closely approximates the curvature of the hull. I wrapped the bulwark around the cup a little section at a time, but working quickly. I didn't crack the wood at all and once dry it held the shape nicely.
Belo trabalho boa continuação abraços muita saúde beijinho
Obrigado!!!
Choosing a smaller wooden ship model is actually much harder than choosing a large one. Imagine how tight the rigging gets on a small model trying to keep the same level of detail as a larger one, and you get the idea.
Ich habe noch nie ein Holzschiff gebaut, nach Deinem Video versuche ich es mal
Buen video... El audio no lo entendía, estará estropeado.
Hola Jose Manuel.
Muchas gracias, nos alegra que le guste el video :)
El video está en inglés!
The video is from "Alex Modeling", unfortunately the construction error can also be seen here. At 11:28 he cuts out the recesses for the frames on the deck, but they have to remain. He also did not move the indicated joints of the deck planking correctly. Otherwise thanks again to Alex for his great videos.
Next time write 11:28 (colon) :
Then we can click and find it immediately 😀.
So you have built the Model, I will receive mine in 14 days.
Some people on the net claim the instruction is only in spanish
Is that true?
Hi. The instructions are mainly in Spanish, but the parts are also translated into English and German. But the pictures give enough clues. It is important to think three times before drilling, gluing or anything else ...
@@elcaputo5931 👍
@@Captain-Nostromo mine are on English, Spanish, Rússia and French
Absolutly right on the deck! My mistake