i was stuck in 000 mode in 685C, but after i change file name (From yn685c_offical_fm_v204.dfu to 685_204.dfu) and it works, i'm very happy to share this.
Dear Maxwell. I updated the flash´s firmware but I'm curious about this thing. I´ve seen several videos about pairing yn685 and the controller in Canon. They can change not only the power and modes with the controller but the zooming as well dynamically. You can see how instantly the parameters change on the flash´s screen as they change them in the controller. I cannot get these features in Nikon. Can you?. I was hoping to achieve it by updating the firmware in both devices. Thanks for sharing your knowledge.
@@VisionGuy After many hours of research, I discovered that those manufactured before 2016 with Firmware 1.2.2 cannot be updated by the user, only by the factory in China.
Found the problem... I had to update the YN622 in first place. After that, installing firmware 1.4 on the 685 was no problem at all, on bowth flashes (win10).
Try taking the batteries out and try it again. I think I had an issue when I did it the first time too, but it worked fine the second time. I have several
@@VisionGuy as mentioned in my comment above it was the old firmware on the trigger. Had to hold down "mode" + switching on. After the update it changed to "group" + switch on.
@@VisionGuy i successfully update it.. But the HSS still now working if the camera is onCam with my Nikon Z50. .. But if i use a 622N-TX trigger the HSS at 1/320 shutterspeed works just fine. Weird
That is weird. Maybe see if it will let you update again? Maybe something got corrupt? I have 3 flash units and one if them failed the update. I had to do it a 2nd time.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
i was stuck in 000 mode in 685C, but after i change file name (From yn685c_offical_fm_v204.dfu to 685_204.dfu) and it works, i'm very happy to share this.
Thanks! Good to know.
GRACIAS!!!!!!! IDOLO!!! MILLON DE GRACIAS!
Dear Maxwell. I updated the flash´s firmware but I'm curious about this thing. I´ve seen several videos about pairing yn685 and the controller in Canon. They can change not only the power and modes with the controller but the zooming as well dynamically. You can see how instantly the parameters change on the flash´s screen as they change them in the controller. I cannot get these features in Nikon. Can you?. I was hoping to achieve it by updating the firmware in both devices. Thanks for sharing your knowledge.
muy bueno, en windosw 7 es igual la forma de actualizar el firmaware? que mejoras trae el firmware?
Tks man
Hello... I press "mode" + "power" botton but no enter in update menu.
Can you help me?
I'm not sure. Did you try to hold the buttons for a few seconds?
@@VisionGuy After many hours of research, I discovered that those manufactured before 2016 with Firmware 1.2.2 cannot be updated by the user, only by the factory in China.
@@EduardoPasqualini wow, that's unfortunate. Thanks for the update
I can't get my YN622N-TX into upgrade agency mode. It's just starting as usual. Any idas?
Found the problem... I had to update the YN622 in first place. After that, installing firmware 1.4 on the 685 was no problem at all, on bowth flashes (win10).
Try taking the batteries out and try it again. I think I had an issue when I did it the first time too, but it worked fine the second time. I have several
@@VisionGuy as mentioned in my comment above it was the old firmware on the trigger. Had to hold down "mode" + switching on. After the update it changed to "group" + switch on.
thank you!!
HI! Can you help me? The flash never reboot and I try it several times and now the flash is not working. Firmaware Version 000
Maxwell Lorenzo Thank you! I resolved using Windows 7. The first time
I uses Windows 10.
Sorry on my appears version: 0000 what can I do?
use fully charged batteries.
That link doesn't work anymore
They might be discontinued. Try to search on google
the link is broken, DO you have any other links?
I'm not sure. This was the link directly to their website. Maybe they changed it?
@@VisionGuy i successfully update it.. But the HSS still now working if the camera is onCam with my Nikon Z50. .. But if i use a 622N-TX trigger the HSS at 1/320 shutterspeed works just fine. Weird
That is weird. Maybe see if it will let you update again? Maybe something got corrupt?
I have 3 flash units and one if them failed the update. I had to do it a 2nd time.
hello to me I keep the firmware in 000 that I can do thanks
use fully charged batteries.
Help.... Any suggestions. I upgraded the TX no problem, but when trying to upgrade the flash at the end it never restarts, and is stuck in 000