Had exactly the same pipe vice in my old workshop, although I preferred to use the chain vice as it gripped better without burring the pipe too much. Fantastic restoration, I'm sure they didn't leave the factory with such quality finishing!
This guys work is really something else. I don't know if I want to call it high level craftsmanship or art. Every piece he does looks like it could sit in a gallery. He has ruined other DIY channels!
He is not "restoring" anything here. He is repairing. It is misleading. Think about it. I am not at all saying that his "repairs" are bad; not in the slightest. All I am saying is that he thinks he's restoring when, in fact, that is not the case. Anytime you have or want to make a new part you lose the moniker of restoration. It is no longer original.
One thing I believe, some pieces were made. The rest is all doubts. The author made the piece rustier (easy for these guys make it). Did he bend some surfaces? Hammered it or applied heat to bend it easier? I don't know if he is the person doing the new pieces, he never shows his face. With so many scam videos, each day is harder to believe in really and true restorations, thanks to the scammers.
There are so many fake restoration channels out there, and I feel lucky to have discovered yours. You’ve truly shown me what genuine artistry looks like.
I know some people complain at times that your work doesn't always match everyone's concept of a "restoration," but I think it is something just as important -- perhaps what could be called a "masterwork transformation," an attempt to reach the ideal that was only approached by the original object or machine. Magnificent work.
Admiro muchísimo tu trabajo. Y una de las cosas que más me gusta es que, a diferencia de otros restauradores, mantienes tu espacio ordenado y tus herramientas impecables. Un placer ver tus videos!
I was so excited to get on RUclips and see a new video from you! I love how your stuff is so shiny you have to blur your reflection in it. Amazing job! Thanks for sharing it with us.
Yeah, I was concerned at first and thought it was for fear of being demonetized because he was squeezing them in the vice. It took me longer than it needed to realize it was the reflection.
I'm sure the original and most other intended users would chuckle over the excessive effort lavished on this utilitarian tool just to make it beautiful. But can't deny the stunning result or how satisfying it is to watch the process. It's like this pipe vise went to a luxury beauty spa ...
When I first discovered Meine Mechanicher's channel, I tought it was another channel of My Mechanics. I'm glad these are from different people as both channels shows great craftmanchip and talent in restauration.
Thanks for the new video! Awesome job as always. Until now I have never yelled at a RUclips workshop video. When you were cleaning up the jaws, I started saying “you better not blue them. They better get plated.!” Thankfully all is well - the jaws are plated and my blood pressure is down.
@@meinemechaniker Hi. Toll, dass es mal wieder ein Video zu einer Restauration gibt. Dachte Du kümmerst Dich jetzt nur noch um das Auto. Wobei ich diese Videos auch super unterhaltsam finde. Mach weiter so. Die Art wie Du alles präsentierst ist einfach nur perfekt. Danke!!!
Her zaman bu tür videoları başkası yapar biz izlerdik. Ürünleri görene kadar Türk olduğunu bile anlamadım.Yaptığınız iş çok profesyonelce. Emeğinize elinize saglık.İyi ki varsınız.
There was so much the do with that vice. That must’ve taken an incredible amount of time to restore. But, you cease to surprise. Beautiful job. I briefly thought there would be a problem when you started hammering on the heated casting to re-round the base. But, everything worked out. See you on the next project.
So, One thing I really like about your channel is that it's genuine... I see a lot of restoration videos where the person clearly made the piece they are restoring way worse just to make a video. It's very cheesy to me. Please don't ever do that! I'd rather not see a video and wait a while than see a bunch of videos that were clearly staged just to make a video. Don't ever change!!! Love your channel.... My interest is woodworking videos but your channel is really wonderful to watch!
What you are referring to are the “fraudsters” who only want us to watch the adverts in their video and not what they are committing fraud with 😠, this restorer is genuine 🤗
Yes, I messed up! Sorry for that. But you too are great, the perfectionism of you both (besides the similar name) confused me. Congratulations from Minas Gerais and do not disappear, as he did. : )
Perfect Craftsmanship as always. Thank you dear friend , I had great time while watching. Especially the retro red color is stunning. Stay safe Gentleman, Cheers 🥃
How nice to see you my dear friend. You are so right about the color. A great retro red. Like tango women's shoes or tango women's red lips 💃🕺 cheers my dear friend 🥃
Outstanding!What you and your ultra-ego do, mymechanics, is pretty cool. Always impressed with your metallurgy, lathe and milling skills. As always, the attention to detail stands out. Well done Sir 👏
Very nice work M.M.... Its always good to see you post another video... I wish you made more, but i know it must take a great deal of time to put together a video of this quality.. Well you take care my friend and tell Old Hand I said hello....
Nice finish, but why did you pop a bolt into the hook side of the pipe vice? When I was an apprentice electrician we used to cut threads onto steel conduit and screw it together (I hear the young ones gasping, oh no hard work!!) and that hook end was always free to hook and unhook to hold and release the pipes.
I'm not sure you understand, the hook is on one side of the vise and will either facilitate the use of the hook or will just lock the head in place. It cannot be changed for left or right handed use.@@iwb316
İçerik ve akış, görüntü işleme harika. İşçilik harika. İlerleyiş harika. Yine nefis bir çekim olmuş. Sizin içerikleriniz bizim için özellikle Türkiye de bulabileceğimiz yerel markaları tanıtmanız açısından çok çok iyi. Bizim gibi amatörlere ışık tutuyor. Onlar yapar biz seyrederizin ötesinde. Çalışmalarımızın devamını dilerim. Çok keyifli ve öğretici.
This pipe vice went from (probably) functional to a work of art and a thing of beauty. I enjoyed the restoration.
I'm glad you liked it.
Had exactly the same pipe vice in my old workshop, although I preferred to use the chain vice as it gripped better without burring the pipe too much. Fantastic restoration, I'm sure they didn't leave the factory with such quality finishing!
Thanks a lot
Very interesting video
Always a good day when you have a new video out. Workmanship is incredible. Thanks for sharing your talents!
Thank you so much Dave
I'll never not be dazzled by the artistry of these restorations.
This guys work is really something else. I don't know if I want to call it high level craftsmanship or art. Every piece he does looks like it could sit in a gallery. He has ruined other DIY channels!
This guy deserves at least 1 million subs.
Thank you, I hope in time
one of your best, MM. As ever, a tribute to your skills but also to the people who designed and manufactured these excellent devices.
Thank you so much
There’s so many fake restoration channels out there that I am blessed to have found yours. You’ve shown me what real artistry is.
Thanks
He is not "restoring" anything here. He is repairing. It is misleading. Think about it. I am not at all saying that his "repairs" are bad; not in the slightest. All I am saying is that he thinks he's restoring when, in fact, that is not the case. Anytime you have or want to make a new part you lose the moniker of restoration. It is no longer original.
One thing I believe, some pieces were made.
The rest is all doubts.
The author made the piece rustier (easy for these guys make it).
Did he bend some surfaces? Hammered it or applied heat to bend it easier?
I don't know if he is the person doing the new pieces, he never shows his face.
With so many scam videos, each day is harder to believe in really and true restorations, thanks to the scammers.
Lol he ripped off the entire style of video, name and logo from the My Mechanics channel.
@@Nomzai ...I am unsure of the age of his channel, but I would tend to agree with you if this channel is younger.
There are so many fake restoration channels out there, and I feel lucky to have discovered yours. You’ve truly shown me what genuine artistry looks like.
Well come 🙏🏻
Some will say it now looks better than when new. Those people are correct. It's a piece of art, worthy to be on display at The Louvre. 👍👍👍
Thank you so much 🙏🏻
Great work by a master craftsman. Thanks!
Thanks Jim
That came out good, I saw it was made in 1971.....one year younger than me. If only I could be restored as well as those tools. Excellent work.
you are still new, best regards sir
I’m a ‘73 product and I said the same thing!!
Very detailed and very clean restauration! Great video, cut and editing, too! 👍
Thank you so much 🙏🏻
Nice, made in sweet home Pennsylvania. Right around the time I was too.
🙏🏻thanks sir
I know some people complain at times that your work doesn't always match everyone's concept of a "restoration," but I think it is something just as important -- perhaps what could be called a "masterwork transformation," an attempt to reach the ideal that was only approached by the original object or machine. Magnificent work.
Thanks
What an artist! Absolutely perfect on every detail!
🙏🏻
I agree. This is more than just high level craftsmanship, this guy is an artist. He has directly influenced me with his eye for detail.
Admiro muchísimo tu trabajo. Y una de las cosas que más me gusta es que, a diferencia de otros restauradores, mantienes tu espacio ordenado y tus herramientas impecables. Un placer ver tus videos!
You are sensitive and meticulous enough to see some details. Thank you.
Thanks for restoring a piece of Erie history.
Appreciate it!
Awesome resto work on a great old tool! Great skills! Cheers! 😀👍🛠️🔧
Thanks a lot
Like, just how many different kinds of files DO YOU HAVE?!?!?!
Great resto!
I think I have more than 100 files that are not the same.
I think I have more than 100 files that are not the same.
I was so excited to get on RUclips and see a new video from you! I love how your stuff is so shiny you have to blur your reflection in it. Amazing job! Thanks for sharing it with us.
Thank you so much
Yeah, I was concerned at first and thought it was for fear of being demonetized because he was squeezing them in the vice. It took me longer than it needed to realize it was the reflection.
Que buen episodio. En restauración y filmación. Mis respetos y admiración.
Muchas gracias Guataco ✋
WOAU! This was like magic! Absolutely amazing work!!!
🙏🏻
Stunning restoration. Incredible attention to detail. Thanks for sharing.
🙏🏻
I have consistently been growing more and more suspicious of the idea that you and My Mechanics are just the same guy... 😂
:=)
Same outrageous, galactic level of mechanical knowledge and skill.
"I make another"
My mechanics would never unnecessarily wear gloves😂their names are suspicious tho
Came here for this comment 😂 reckon the gloves are so people can’t compare hands 🤔
I believe it’s his dad
I'm sure the original and most other intended users would chuckle over the excessive effort lavished on this utilitarian tool just to make it beautiful. But can't deny the stunning result or how satisfying it is to watch the process. It's like this pipe vise went to a luxury beauty spa ...
It’s amazing what some elbow grease and patience can do
Wow, another perfect rebuild!!!
Thanks
Your hard work has rendered the vise to be a show piece
A pure Master class restoration ❤
Thank you
Üstad yine mükemmel bir işçilik 👏👏👏
Teşekkür ederim 🙏🏻
This project was exceptionally good. You have the best tools.
Thanks sir
The work and pride of a Renaissance Guild craftsman shows in every restoration you do.
Thank you so much
Elinize sağlık. Mükemmel bir video daha.
Çok teşekkür ederim çok sağolun eksik olmayın 🙏🏻
OUTSTANDING JOB . Thank You for sharing .
🙏🏻
Show peice vise no doubt. Beautiful finishing as always!
Thanks Matt
Another great result MM. 😊
Datsun 👌
Absolutely fantastic and amazing end result as usual
Thanks sir
We've MISSED YOU!!
Sincerely, work.
Thank you Truman
great job!
Thanks
I did a similar pipe vice restore. Nice work!
I’m glad you found it interesting
Great restoration, looks brand new.
Thanks
I have a couple of these vises. I grew up in Erie not too far from the Reed factory, they are actually still in business.
Better than new! Waiting for more of the Mazda restoration videos. I could watch this guy all day! Lol
I guess that car wasn't a Mazda. And I guess I'm not that guy either. I am sad.
My mechanics Datzun 240Z
You'll also note that he didn't do a taste test of a beer in this video --- I'm kidding, I'm kidding! ;-)
When I first discovered Meine Mechanicher's channel, I tought it was another channel of My Mechanics. I'm glad these are from different people as both channels shows great craftmanchip and talent in restauration.
@@LelianWeatherwax, me too, I totally assumed he had two channels!
Brilliant as always.
🙏🏻
Hello mister beautiful restoration beautifully restored good job well done
Thanks sir
As good as new maybe better. Thank you for sharing.👍
Merci Dennis
Marvellous - you couldn't buy a new one that is that attractive and functional.
The best restoration channel. 10/10
Thank you so much
Amazing, absolutely beautiful. You are a master. You are very talented.
Thanks
Watching this from Erie PA
🤗
Thanks for the new video! Awesome job as always. Until now I have never yelled at a RUclips workshop video. When you were cleaning up the jaws, I started saying “you better not blue them. They better get plated.!” Thankfully all is well - the jaws are plated and my blood pressure is down.
It's nice to be of the same opinion as you.
Herzamanki gibi büyük emek sonucu ortaya mükemmel bir iş çıkartmışsınız hocam. Ellerinize sağlık .
Çok teşekkür ederim
Outstanding resto on this pipe vise. I’ve fitted a few miles of pipe with a vise like that but none as nice as yours. 👍🏼
🙏🏻
Itd nice to have all the tools to do that not cost affective but great work and its a nice show pice great video
Thanks sir
Stunning!
🙏🏻
Spectacular! Better than new!
🙏🏻
Great work with precision
Thanks a lot
Beautiful, wow!
🙏🏻
He's back! 👏
Hi alex
@@meinemechaniker Hi. Toll, dass es mal wieder ein Video zu einer Restauration gibt. Dachte Du kümmerst Dich jetzt nur noch um das Auto. Wobei ich diese Videos auch super unterhaltsam finde. Mach weiter so. Die Art wie Du alles präsentierst ist einfach nur perfekt. Danke!!!
@@alex.germany Ich bin kein Schweizer 😉
@@meinemechaniker 😂 Oups. Ist das Zufall mit den Kanalnamen 🙂. Egal. hab sie beide aboniert...
@@alex.germany Mich hat das Wort Feinmechaniker inspiriert
Beautiful...as always.
Thanks
What a delicate job!...
Your work with the mill and lathe is awesome, attention to detail, and a passion for craftsmanship unsurpassed. Well done
Thanks a lot
Awesome restoration!
Thanks Frick
Absolutely fantastic restoration you made it brand new vise great work bro 👍💯
Thanks mate 🙏🏻
Her zaman bu tür videoları başkası yapar biz izlerdik. Ürünleri görene kadar Türk olduğunu bile anlamadım.Yaptığınız iş çok profesyonelce. Emeğinize elinize saglık.İyi ki varsınız.
Teşekkür ederim eksik olmayın
Finally something from my favorite channel! Regards! 👍😊
Thanks Sarka
How is working with Datsun going? Will we see something?😊
@GWN_Garage I thought Meine Mechaniker and My Mechanics were one owner's channel 🤦😁 PS The quality of workmanship is very similar.
Amazing and detailing job my friend congratulations
Thanks mate
There was so much the do with that vice. That must’ve taken an incredible amount of time to restore. But, you cease to surprise. Beautiful job. I briefly thought there would be a problem when you started hammering on the heated casting to re-round the base. But, everything worked out. See you on the next project.
thanks. This product is cast steel. so you don't need to worry. I'm glad you liked it.
Please make more videos I really enjoy them,thank you…
I'm glad you liked it
The level of detail...I'm very impressed. Thank you 👏👏👏👏👏
🙏🏻
So, One thing I really like about your channel is that it's genuine... I see a lot of restoration videos where the person clearly made the piece they are restoring way worse just to make a video. It's very cheesy to me. Please don't ever do that! I'd rather not see a video and wait a while than see a bunch of videos that were clearly staged just to make a video. Don't ever change!!! Love your channel.... My interest is woodworking videos but your channel is really wonderful to watch!
I have paid attention to what you said for 5 years and in my 40 projects. By the way, it is a pleasure to see people like you who know what they want.
What you are referring to are the “fraudsters” who only want us to watch the adverts in their video and not what they are committing fraud with 😠, this restorer is genuine 🤗
Great restorations, more videos please.
🙏🏻
Absolutely brilliant 👍👍🙏🙏
Thanks sir
That was a great restoration! Your attention to detail is second to none! I wish we could get that great Hammerite paint here in the USA.
Thank you. I heard there is no hammerite america. But this red hammerite is not available in any country other than England.
Excelente, como siempre! Abrazo!
German, Lomas de Solymar, Uruguay
Thanks sir
Pixelating your reflection out of some of the shots, was a nice touch. Must keep up the mystery!
Rất thích xem kênh của bạn , kỹ năng phục hồi đồ cũ của bạn rất tuyệt vời nhưng video của bạn ít quá , mong bạn ra nhìu video hơn nữa❤❤❤
Wow! This was a beautiful job.
Thanks sir
Lovely work, as usual. Man, after you bought that beautiful vintage car you just forgot us, yours long term fans.
I'm not him, I guess there was confusion. And as for that car. I think he got into trouble.
Yes, I messed up! Sorry for that. But you too are great, the perfectionism of you both (besides the similar name) confused me. Congratulations from Minas Gerais and do not disappear, as he did. : )
Lovely work! Really sensitive restoration!!!
🙏🏻
The fasteners you made were brilliant!
Thanks sit
Perfect Craftsmanship as always. Thank you dear friend , I had great time while watching. Especially the retro red color is stunning. Stay safe Gentleman, Cheers 🥃
How nice to see you my dear friend. You are so right about the color. A great retro red. Like tango women's shoes or tango women's red lips 💃🕺 cheers my dear friend 🥃
01:26 oh my goodness 😮
🤗
Wonderful work.
Thanks a lot
Outstanding!What you and your ultra-ego do, mymechanics, is pretty cool. Always impressed with your metallurgy, lathe and milling skills. As always, the attention to detail stands out. Well done Sir 👏
Thanks sir
Wow…. Well done. 10/10
Thanks Mr.Nicovandyk
Very nice work M.M.... Its always good to see you post another video... I wish you made more, but i know it must take a great deal of time to put together a video of this quality.. Well you take care my friend and tell Old Hand I said hello....
Thank you my friend, I will convey your greetings.
Muito bom resultado, parabéns!!!
Obrigado
Great job.
Gut gemacht 🙌
Danke
Nice vise!
👌
Made right here in my home town, Erie PA
bravo beau travail soigné !
Thanks sir
Nice restoration 👏👏
Thanks
Nice 🏴👍
Thanks kevin you are here again
Nice finish, but why did you pop a bolt into the hook side of the pipe vice? When I was an apprentice electrician we used to cut threads onto steel conduit and screw it together (I hear the young ones gasping, oh no hard work!!) and that hook end was always free to hook and unhook to hold and release the pipes.
What you describe makes sense for a quick move. but when I do it it makes sense for slow motion. In short, both are correct.
And having the two holes was so you could have either left or right hand opening.
I'm not sure you understand, the hook is on one side of the vise and will either facilitate the use of the hook or will just lock the head in place. It cannot be changed for left or right handed use.@@iwb316
Even the very first photo shows there's no bolt next to the hook and one is never needed.
Going to drive somebody nuts trying to use it that way!
Best restoration, five stars
Thanks
İçerik ve akış, görüntü işleme harika. İşçilik harika. İlerleyiş harika. Yine nefis bir çekim olmuş. Sizin içerikleriniz bizim için özellikle Türkiye de bulabileceğimiz yerel markaları tanıtmanız açısından çok çok iyi. Bizim gibi amatörlere ışık tutuyor. Onlar yapar biz seyrederizin ötesinde. Çalışmalarımızın devamını dilerim. Çok keyifli ve öğretici.
Teşekkür ederim eksik olmayın. Reklamla ilgili söylediğiniz şeyi anlamadım.
Very lovely❤
Can't be my mechanics, this guys sandblaster's powerswitch is pristine.
Hey guy
Классный ролик. Немного в японском стиле в конце:))