Car Trunk LED Light Strip | Colorful RGB Dynamic Flowing LED Strip

Поделиться
HTML-код
  • Опубликовано: 3 янв 2018
  • Review of Colorful RGB Dynamic Flowing Car Trunk LED Light Strip.
    PURCHASE LINK:
    bit.ly/2ApkcS4
    q.gs/E1Ygr
    goo.gl/bjhEkh
    Help And Support Me In Making More Interesting Videos Via Paytm👇🏻
    Rs-20/= p-y.tm/m-1vhgK
    Rs-50/= p-y.tm/33X-VJl
    PayPal👇🏻
    www.paypal.me/KaranBakrania

Комментарии • 78

  • @moranatal22
    @moranatal22 5 лет назад +1

    Hi
    Thanks for your video.
    Witch watch model you wear in this video?
    I like it.

  • @pankajwalia4864
    @pankajwalia4864 4 года назад

    Sir adopter may kon kon si tare lage gi

  • @hayzar4054
    @hayzar4054 4 года назад +1

    Can u help me how to install my car Honda Accord 2012

  • @selgrayyt282
    @selgrayyt282 5 лет назад +1

    hi boss is the positive (red) and the running light (pink) have same connection in the possitive wire of the park bulb?
    and the negative (black) is connected to the negative of the park bulb? is thst right? pls answer boss thank you

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      Yes its correct

    • @allzzizzwellzz5841
      @allzzizzwellzz5841 3 года назад

      @@KaranBakrania if i do that reverse light not working.... i don't know where to connect the steady blue light

  • @hectorvieyra6985
    @hectorvieyra6985 5 лет назад +1

    How do I connect the hazard lights? Now connect the directional lights. Regards

  • @prawny12009
    @prawny12009 4 года назад +1

    Red amber and white would be far more useful, especially if you could set the amber to act like indicator lights.

  • @Parkii14
    @Parkii14 5 лет назад +1

    Hello can you help me? I have passat cc 2008. I know where to connect every whire of led strip with no problem. But when it gets signal it just blinks and turns off. Do you know what is the problem? Do I need CANBUS?

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      Hello,
      Please try to connect the led strip direct with battery and check if the turn signal led is working properly. If the problem still exists then there is some problem with the LED Strip.

  • @dasfreakster
    @dasfreakster 5 лет назад

    Can you pick just one Dynamic Flowing option or does it rotate? Also, can this be trimmed to fit smaller spaces?

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      No, cannot pick one option in dynamic. It will keep rotating.

  • @mach350z6
    @mach350z6 Год назад

    If I want the daytime running late to work where do I hook up the wire to

  • @kirandasa8420
    @kirandasa8420 2 года назад

    Bro can u help me buying this product need 3 nos.
    Link which u have share says can’t be shipped to India. So where else can i get this strip to bangalore

  • @mendenos
    @mendenos 5 лет назад

    What kind of multi tester is that?

  • @CarlosRodriguez-ip1fs
    @CarlosRodriguez-ip1fs 6 лет назад +2

    Greetings as I can do to remove only the runnig ligth and leave the other functions is that no.I like how it looks the sky blue color all the time on. Thanks from now

    • @smidc
      @smidc 6 лет назад

      I'd like to know the answer to this as well. I like the idea of it being more subtle and not having the running light on. I was thinking that maybe the acc wire not being wired up might work.

    • @Belfree
      @Belfree 6 лет назад +1

      If you dont connect the wire thats for the running lights it'll work fine. In my country its a 480 dolor fine if you use RGB in the rear or front but the turn signals and the brake and reverce can be used no problem. Just dont wire in the running lights and done

    • @KaranBakrania
      @KaranBakrania  6 лет назад +2

      Carlos Rodriguez,
      Yes, you can remove the running lights just by removing or not connecting the running lights wires. According to my video i have pink and green wire as running lights(pink wire for ice blue lights and green wire for RGB lights). So by simply not connecting those two wires will cancel the function of running lights and all other function will be working fine.
      Thank You

  • @devilssouls221
    @devilssouls221 5 лет назад +2

    If i dont want rgb ( dynamique running light ) what should i have to do

    • @KaranBakrania
      @KaranBakrania  5 лет назад +2

      Simple don't connect the green wire. Leave it as it is.

  • @waqasbtm1
    @waqasbtm1 Год назад

    What is width lamp don’t under please explain

  • @amitsati3140
    @amitsati3140 3 года назад

    Hi Karan
    I want to buy this multicolor led but unable to by can you pls available this In pune

  • @pescaoPR
    @pescaoPR 5 лет назад +1

    Hey Karan, I buy a lights and I do not understand, please help me, I have a fiat 500x

  • @danyo5509
    @danyo5509 5 лет назад

    My light blinks while braking and then does the turn signal. So could I add a diode to the brake light wire going to the module? So it wouldn’t blink red when braking at the same time I’m using my turn signal?

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      Danyo,
      The break light will blink for 3-4 times and then it will glow constantly.

  • @austinsamuel4933
    @austinsamuel4933 5 лет назад +1

    Isn't running light(blue light) and dynamic rgb light have same connection which is parking bulb of tail light ?

    • @KaranBakrania
      @KaranBakrania  5 лет назад +1

      Yes both can be connected to parking bulb. but both cannot be connected at the same time you have to choose any one option. Either only blue running light or RGB dynamic lights.

    • @austinsamuel4933
      @austinsamuel4933 5 лет назад +1

      @@KaranBakrania thanks for your prompt reply subscribed your channel👍

    • @elcheapoluzman5380
      @elcheapoluzman5380 5 лет назад

      austin samuel should consider the rgb to its own on off switch that way you can power it whenever and wherever even if the cars is parked locked and off seems more logicall that way to me

  • @pranshu0904
    @pranshu0904 3 года назад

    For i10 car its difficult, you cannot fit like this. the main wire you have to take from battery or from the tank connection wire (it will work only during switch on). its not so easy as shown in this one.

  • @irsansaputraris
    @irsansaputraris 5 лет назад

    I don't want the blue led glowing while my running light on, and also intend the all system only works when my running light on (at night). If I connect the positive cable to the running light (not to battery) is it ok ?

    • @KaranBakrania
      @KaranBakrania  5 лет назад +1

      Don't connect the pink wire and connect the positive wire(+) to the parking bulb of the tail light.
      By doing this the blue running lights will not glow but all other functions will work as it is.

    • @irsansaputraris
      @irsansaputraris 5 лет назад +1

      @@KaranBakrania thanks for prompt & clear instructions, best regards from me

  • @cartoonindian2.020
    @cartoonindian2.020 4 года назад +1

    Sir boot light kitna fit lamba he please batae

  • @kaleeswarans7775
    @kaleeswarans7775 5 лет назад

    I need detail connection for my i10 magna car

  • @solitariomanzano2869
    @solitariomanzano2869 5 лет назад +1

    Where i can take 12v for the red wire

  • @TugaemBristol
    @TugaemBristol 6 лет назад +1

    to which light of the rear lights should i connect the red wire? thats my only problem... i dont know where i should connect the red wire :(((

    • @mattchumoore4214
      @mattchumoore4214 6 лет назад

      Tuga em Bristol it can be connected to positive battery terminal

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      Tuga em Bristol,
      Red wire is of positive supply. It needs to be connected to any one of the rear parking bulb (bulb which constantly glows when lights are switched ON).

    • @danyo5509
      @danyo5509 5 лет назад +1

      Connected mine to my tail lights that need to be on at night, not the brake lights. Also the black (-) wire to that tail light black wire. Hopefully this is right

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      @@danyo5509
      Yes correct

    • @coolmen3570
      @coolmen3570 5 лет назад

      @@KaranBakrania plz can you help how can I install this light in crv 2017..

  • @11thgenerationcorolla57
    @11thgenerationcorolla57 3 года назад

    Where else to connect the positive and negative wires? Didnt want to ran a wires all the way to the front and connect it to the battery terminal. Is there anyway i could do that?

    • @KaranBakrania
      @KaranBakrania  3 года назад

      There will be positive and negative wire coming in tail lights. You can connect it with it.

  • @maxbur5439
    @maxbur5439 3 года назад

    Спасибо за видео

  • @manjeetHR15
    @manjeetHR15 3 года назад

    Bhai meri led strip me multicolor nhi h iceblue h

  • @atillahancer8697
    @atillahancer8697 5 лет назад

    Slm arkadaşım bu ledin kodu varmı neden aldın bankada atabilirmisin

  • @hamdan9532
    @hamdan9532 5 лет назад

    Harga nya berapa mdn beli nya dimana

  • @jozsefjozsef5103
    @jozsefjozsef5103 6 лет назад

    Ok

  • @mendenos
    @mendenos 5 лет назад +2

    Ahhh I see it's just a 12V power supply I just got it on Amazon

  • @itzyahmanjm8859
    @itzyahmanjm8859 5 лет назад

    where can i buy this stuff?

  • @chetankurle4174
    @chetankurle4174 6 лет назад

    price? and purchase link please

    • @KaranBakrania
      @KaranBakrania  6 лет назад +1

      chetan kurle,
      Please see the description box, you will find the link there.
      Thank You.

  • @XoxVilOkZxoX
    @XoxVilOkZxoX 6 лет назад

    I need help.

    • @KaranBakrania
      @KaranBakrania  6 лет назад

      Victor J Castillo,
      What help you need?

  • @rajdeep8317
    @rajdeep8317 5 лет назад

    What is the positive wire ???

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      Red wire is Positive wire. It needs Direct supply for the LEDs to work

    • @rajdeep8317
      @rajdeep8317 5 лет назад

      Plzz make a video i want to install it on my car...

    • @rajdeep8317
      @rajdeep8317 5 лет назад

      Make a nice video of a car

  • @atozvlogs5585
    @atozvlogs5585 5 лет назад +1

    I dont no where connect green wire

    • @KaranBakrania
      @KaranBakrania  5 лет назад

      Connect Green wire with(tail light) the bulb which glows when you turn on the parking lights.

    • @atozvlogs5585
      @atozvlogs5585 5 лет назад

      @@KaranBakrania thanks