I only heard of the hk417 because of bf3 and ghost recon future soldier, and it’s rarely mentioned in the video game world but it’s nice to see videos about it
First time I saw the HK417 was in SAS Zombie Assault 2. Gun easily shredded hordes of zombies in that game, maybe that's why I'm a huge fan of the 417 IRL 😂😅
Great video as always! Hate to break it to you, but the buttpad on it is wrong for the Hyena build if you compare it to the pic. 417s were issued with the concave pad, atleast here in Norway, and the convex one for the 416s. Our Rotex 3s are all going in the process of being replaced now as well. Too bad a couple hundred of them will be destroyed instead of being made available to the US. I have always hated it tho, 1kg of suppressor on the end of a 20" barrel totally ruins all balance. And your zero with it is ridicolous. 9:29 That dope chart is insane tho. Our 20" runs at ish 2690fps with 168gr
I’m an HK fanboy but I would have to say the SCAR17 is the better gun of the two in the “door kicker” roll. It weighs a pound and a half less and is a piston gun as well (13 inch barrel compared to 12) Now for a long range rifle the HK is more accurate AND precise along with the weight to mitigate the recoil. I have all 4 of the high end large frame rifles from HK, KAC, LMT and FN and they are all super fun. Great video!
“Probably” stacked a few bodies? Probably?? There is not a shadow of a doubt in my mind that those shorty blasters in the hands of our Nation’s best pipe hitters stacked a lot more then a few lol😅, I’m betting them stacks would be equivalent to firewood getting stacked by the cord in them cold northern states
If were getting literal, the M110A1 is a HK417. And thats general issue to army snipers, its not only a SOCOM gun. So yes its certainly stacked bodies lol
most definitely not forgotten its heavily used by the SBS, SAS and even sees some use by royal marines and royal rangers its a fire arm known to be used by us British special forces and many other countries i have never know a US SF squad to deploy with the hk417 when it comes to assault fire arms i have only seen the US SF use the M4A1, mk18, mk16 scar, mk17 scar, M16, m27 , mk14 and the hk416 (the 556 version of the hk417) i would not have even considered the US uses the hk417 i am very pleasantly surprised by this info great vid as well love the 417 carbine my favorite battle rifle by a long shot
Before I watch the video, I want to say I talked with a veteran recently who’d gone to Iraq once, and Afghanistan twice, around the late 00’s. As he relayed it to me, on one of the Afghanistan deployments when he was with the infantry he was in the heavy weapons group (I forget the terminology he used, I want to say company?), and they had an M110, a Barret, and an EBR. At least in that experience, the EBR was preferred over the M110. He said it was more accurate - I would hazard a guess it’s because of the ammo shortages they also dealt with, he spoke of de-linking 50 cal MG ammo. It wouldn’t surprise me if the m14 was more able to utilize big standard 7.62 than the more specialized M110.
In France we need to pay 150€ for a mag for an mr 308 😅. I love my mr 223 but man 308 is so thicc and beefy, it looks unbreakable. In 20" it is also pretty heavy, around 7kg...
All that money just for you to lay your weapons down as soon as someone invades your country😂 won’t be the first or last time your country will do that.
@110sassactual Hub assembly was sticking and not rotating, loosening untightening properly. Literally without shooting at all, just checking alignment with my guns, it was a pain and harder to come off then a carbon lock surefire
Have you had any FTE issues with 25 round Pmags in any of your AR 10 platforms? I've tried to tune my AR10 but still having issues when suppressed. (have adjustable gas block, switched springs, buffers, etc.) beginning to think its the 25 round mags, usually fails to extract on the last couple rounds.
My factory trigger is ok, but i upgraded to the geissele and its leagues better. Theres only like 2 stocks that you can swap it to ans theyre both made by hk and wildly expensive. BCG is proprietary, and theres no good adjustable gas systems for them so normally bought into flow through. The M110A1 also runs the hux hxqd 762
@LevanDarratt oh for sure. Obviously a flow 762 is going to beat the hxqd when it comes to weight and suppression but mine does well enough that I'm not jumping ship to a flow yet even with being a dealer 🤷♂️
The most difficult parts to source when cloning these are the adjustable gas blocks and the chrome-lined barrels. One can chop an mr762 barrel but it will lack the chrome lining. You can modify the factory mr762 gasblock for use with a 12 inch barrel but obviously it will be overgassed with a non-flow through can.
@@henrygonzalez360 It’s a little lighter than my older POF, but balances better. Also, much more accurate. I’m getting 1-1/2” groups at 200y with 168g match ammo.
@@110sassactual 1250 can plus stamp 4000 gun with tax (for anorexic barrel) rail Stock Cut barrel to 12 and should be an LRP barrel Roll stamps Adjustable gas block Not to mention optic 💰 💰 So around 8-10k and a decent wait time Not mentioning how correct this build probably is if you want the 417 bcg vs the mr308 that’s more 💰 and the correct upper and this is the correct lower different than that of an mr308 of course it’s HK Edit: and good luck even finding any of it for low prices if at all
Holy shit look at the hair on that guy. Sass that’s a beautiful fucking head of hair bro. What kind of products are you putting in it? Your hair should have its own OF page. I would subscribe
I have the criterion 13" 7.62x51 barrel built on the MEGA Arm's upper and lower receiver. I'm using the Adams Arm's piston system and it's a tack driver.
@@Tyr1Outfittersthe suppressor has a feel of a flow thru. Super quiet. Feels way lighter than it is due to weight in the back. Really my favorite all around 30 cal suppressor atm. Thanks guys
Wondering if he can use these guns and ammo as a tax write off ? It’s all part of his business expenses right ? Like tires and oil and shit for truck drivers. Seems like he should be able to
@@rocco9216 lol what? I love trump so much I’ve spent over 3 grand in getting all of us books since 2015 signed (3 in total), I have all his kids signed books, and I even got Ivana trumps raising trump signed from the publisher! I adore that man. But sass is one letter short of so gay
Thanks to Kiran and the TYR1 crew for allowing us to work on this rifle. Re-lasering the text and pic rails was a highlight to the build. 😅 Great run through by 110 SASS 🫡
I only heard of the hk417 because of bf3 and ghost recon future soldier, and it’s rarely mentioned in the video game world but it’s nice to see videos about it
It's in a lot of games man, it's just called weird names due to copyright issues
Yup future soldier for me too lol
Video games are probably one of the contributing factors to my obsession lmaoo
First time I saw the HK417 was in SAS Zombie Assault 2. Gun easily shredded hordes of zombies in that game, maybe that's why I'm a huge fan of the 417 IRL 😂😅
Love seeing this platform getting more attention
I KNOW this is fun and for entertainment..cuz my heart came out of my chest thinking of all that match ammo getting dumped ;)
I do it for the KINGS!
Looks and shoots like a 5.56 , I came to see the hard rocking HK and stayed till the end!❤
“Everything is getting shorter” looks down aww
Hahahhahahah
Very similar to the M27, but just chambered in 7.62. Amazing platform overall! No matter 5.56 or 7.62. Hk knows their sh**
The intro 😩🤌🏻
❤️
The flow is strong with this one! Great content!!
Sponsored by hot girl shampoo 💅🏼💁🏼♀️😂
What a build man. Impressive rifle his Royal Sass, I believe if I could I would build it.
Great content as always!
Xoxo ❤️
Very much enjoyed the video. Thank you
Glad you enjoyed it
That vapor trail tho 👌😏🤤
You can actually watch the bullet drop in!
What a beautiful rifle
That it is!
Fantastic rifle, really enjoyed, thanks
Xoxo
Nice flow bruh
Please don’t make me blush
I believe POF has a revolution that’s 12.5 if I recall. Great vid
Great video as always! Hate to break it to you, but the buttpad on it is wrong for the Hyena build if you compare it to the pic. 417s were issued with the concave pad, atleast here in Norway, and the convex one for the 416s.
Our Rotex 3s are all going in the process of being replaced now as well. Too bad a couple hundred of them will be destroyed instead of being made available to the US. I have always hated it tho, 1kg of suppressor on the end of a 20" barrel totally ruins all balance. And your zero with it is ridicolous.
9:29 That dope chart is insane tho. Our 20" runs at ish 2690fps with 168gr
What do you mean by ridiculous?
We need a g27k video. Keep up the great videos bro.
Thanks man!!
I love my Rotex iii can’t wait to complete my RAL8000 417d
I’m an HK fanboy but I would have to say the SCAR17 is the better gun of the two in the “door kicker” roll. It weighs a pound and a half less and is a piston gun as well (13 inch barrel compared to 12) Now for a long range rifle the HK is more accurate AND precise along with the weight to mitigate the recoil. I have all 4 of the high end large frame rifles from HK, KAC, LMT and FN and they are all super fun. Great video!
Me personally, I’d rather call in an air strike ❤️😂
Well the g27k is 13”
“Probably” stacked a few bodies? Probably?? There is not a shadow of a doubt in my mind that those shorty blasters in the hands of our Nation’s best pipe hitters stacked a lot more then a few lol😅, I’m betting them stacks would be equivalent to firewood getting stacked by the cord in them cold northern states
✨sarcasm ✨
Definitely a few cords and ricks 😂
If were getting literal, the M110A1 is a HK417. And thats general issue to army snipers, its not only a SOCOM gun. So yes its certainly stacked bodies lol
Literally my dream gun
That is a sweet HK for sure,oh yeah they've put in some work overseas.
No doubt!
most definitely not forgotten its heavily used by the SBS, SAS and even sees some use by royal marines and royal rangers its a fire arm known to be used by us British special forces and many other countries i have never know a US SF squad to deploy with the hk417 when it comes to assault fire arms i have only seen the US SF use the M4A1, mk18, mk16 scar, mk17 scar, M16, m27 , mk14 and the hk416 (the 556 version of the hk417) i would not have even considered the US uses the hk417 i am very pleasantly surprised by this info great vid as well love the 417 carbine my favorite battle rifle by a long shot
But the US forces seems to have forgotten it as the assaulter role
@@110sassactual ah I hear you brother
The US Army is adopting a 417 as the M110a1 as dmr
@@rustys.1070 been there since 2020
@@110sassactual thanks patriot 🫡
Before I watch the video, I want to say I talked with a veteran recently who’d gone to Iraq once, and Afghanistan twice, around the late 00’s. As he relayed it to me, on one of the Afghanistan deployments when he was with the infantry he was in the heavy weapons group (I forget the terminology he used, I want to say company?), and they had an M110, a Barret, and an EBR. At least in that experience, the EBR was preferred over the M110. He said it was more accurate - I would hazard a guess it’s because of the ammo shortages they also dealt with, he spoke of de-linking 50 cal MG ammo. It wouldn’t surprise me if the m14 was more able to utilize big standard 7.62 than the more specialized M110.
🇺🇸
@@Mrgunsngear 🇺🇲💪🏽🇺🇲
I have a 14.5" POF 7.62 and it's a hoot to shoot! Not the track record of H&K, but they're more available to the public. :)
Kelly enterprises does their own iteration of the POF. Dope gun
I really didn't need the quad rail for my MR762, but I guess now I do
YES!
Oh hey king.
Love me large frame guns, 308 is beloved
FAX
Fuck I need a 417 short barrel now. God damnit
Corn combat footage is a vibe
Corn combat 😂😂😂
HK417 is bae.
HK 417 do be high tier
HK417>Sig XM77
@@dariuswilliams7509 FAX
I see HK rifle… I want HK rifle.
Same
Scar 17 has their 13 in barrel. I know you dont like scars but thats the shortest besides that hk417
Sig spear 13" 308, POF rogue, revolution DI, revolution PD, CMMG banshee and a few others make 12.5s as well
@@TheMikeshannon DD also does a 12.5 but as far as issued guns that list is pretty short.
Hk has a 13" and 12" for different models
Improved G3k.
Ironically this drops the day we got a package to put together.
Someone can be 90% there. Theyd just need the markings and optic.
WOOOOOOO
Have you done a Sig spear 7.62x51 review yet......will you?
Proprietary magazine always killed this for me.
It is an unfortunate downfall
Wilson Combat TTU-3 trigger will work
In France we need to pay 150€ for a mag for an mr 308 😅. I love my mr 223 but man 308 is so thicc and beefy, it looks unbreakable. In 20" it is also pretty heavy, around 7kg...
All that money just for you to lay your weapons down as soon as someone invades your country😂 won’t be the first or last time your country will do that.
@@jesuschrist8069 i hope not... Enjoy your horses vidéo look nice and sound like freedom ❤️
@@MHM0726 thank you, I hope not either for your case.
funny, in Belgium I imported the LMT MARS-H with 13.5 , still cheaper than this one, that is easy to get :-) how does it compare for you?
My Rotex was new and had to go back to B&T
They get you taken care of?
@@110sassactual been 8dys and crickets.....
@110sassactual Hub assembly was sticking and not rotating, loosening untightening properly. Literally without shooting at all, just checking alignment with my guns, it was a pain and harder to come off then a carbon lock surefire
I think : type A armament, KAC, LMT, H&K are the only ones making 14.5 and under
The new, A2 variant, is 13" (or 16.5 or 20"), so I guess H&K figured 12" just isn't quite enough.
Bro You look like the Fabio of 7.62x51 world
Gonna make me blush 💅🏼
Have you had any FTE issues with 25 round Pmags in any of your AR 10 platforms? I've tried to tune my AR10 but still having issues when suppressed. (have adjustable gas block, switched springs, buffers, etc.) beginning to think its the 25 round mags, usually fails to extract on the last couple rounds.
My factory trigger is ok, but i upgraded to the geissele and its leagues better. Theres only like 2 stocks that you can swap it to ans theyre both made by hk and wildly expensive. BCG is proprietary, and theres no good adjustable gas systems for them so normally bought into flow through. The M110A1 also runs the hux hxqd 762
G triggers are SOLID
I’m ready to try my OSS. Thing is twice as heavy as the hux 😂
@LevanDarratt oh for sure. Obviously a flow 762 is going to beat the hxqd when it comes to weight and suppression but mine does well enough that I'm not jumping ship to a flow yet even with being a dealer 🤷♂️
Good lord your hair is magnificent
Hair by hot girl summer shampoo 💁🏼♀️💅🏼💕
Think the Cz Bren2 comes with 10.9inch barrel option - wouldnt want to shoot that in a house :)
For in case you need a follow-up shot. You won't need one.
The most difficult parts to source when cloning these are the adjustable gas blocks and the chrome-lined barrels. One can chop an mr762 barrel but it will lack the chrome lining. You can modify the factory mr762 gasblock for use with a 12 inch barrel but obviously it will be overgassed with a non-flow through can.
It’s definitely not an easy one to clone!
I’ve never understood the ‘no lube’ life. I understand the no cleaning thing more, but like why not have the gun cycle easier/longer?
Yes. Always lube your guns.
Sweet! Are we ever going to see a Daniel Defense DD5 review?
Not Gucci enough 😂😂
@@henrygonzalez360 Haha! I’m just curious how it stacks up to other large frame semi-auto rifles. I’m loving mine so far.
@@wisco_guy
Heard it's a terrific rifle, and light for it's size. Can't go wrong with DD 👍🏽🎯🇺🇲
@@henrygonzalez360 It’s a little lighter than my older POF, but balances better. Also, much more accurate. I’m getting 1-1/2” groups at 200y with 168g match ammo.
Lube your guns
What was the name of the company that did the conversion? Sigwell? Me likey!
Sigwo Arms
0:59 And that is why no one has the balls to invade rural America
Hahahaha militia of the corn
Why all the knockoff lasers and nods?
Where are you finding these $40 mags? Asking for a friend.
Primary arms has them on sale for $45 right now
Gotta look. They pop up often on sale
So this replaces 5.56 but still is only good to about 600 yards?
It delivers 2-3 times the energy at those distances
Bro, what's your issue with the 416? Why the face?
I feel the 416 doesn’t solve any real problems and its cons outweigh any of of it’s positives
Any idea the cost of that build?
I’d say 3500 for gat
800 can
Barrel chop and rethread 200
Lower remark 250-300
Rail 500
Optic 2k
@@110sassactual
1250 can plus stamp
4000 gun with tax (for anorexic barrel)
rail
Stock
Cut barrel to 12 and should be an LRP barrel
Roll stamps
Adjustable gas block
Not to mention optic 💰 💰 So around 8-10k and a decent wait time
Not mentioning how correct this build probably is if you want the 417 bcg vs the mr308 that’s more 💰 and the correct upper and this is the correct lower different than that of an mr308
of course it’s HK
Edit: and good luck even finding any of it for low prices if at all
Holy shit look at the hair on that guy. Sass that’s a beautiful fucking head of hair bro. What kind of products are you putting in it? Your hair should have its own OF page. I would subscribe
Bro, I haven’t had a hair cut in ~7 months 😂😂🤌🏼
I have the criterion 13" 7.62x51 barrel built on the MEGA Arm's upper and lower receiver. I'm using the Adams Arm's piston system and it's a tack driver.
And?
What kind of velocity are u getting
KAC and LMT > HK all day and all week, the m27 wasnt all that for the weight and bulk.
Direct impingement is better than piston driven?
Both have benefits and draw backs
Always was ❤️
Did anyone catch the name of the company that’s doing the 417 D conversion kit?
Sigwo arms
theres no sound :(
Holy mother of overgassing batman
while it may appear that was there really isn't much coming back. Rifle runs super smooth.
VERY smooth shooter
@@Tyr1Outfittersthe suppressor has a feel of a flow thru. Super quiet. Feels way lighter than it is due to weight in the back. Really my favorite all around 30 cal suppressor atm. Thanks guys
Well fawk me for some reason mine says made in Georgia on it 🤣
Where those rounds tumbling. During the slow motion the rounds looked like they were tumbling.
At 400 yards, they shouldn’t have been
@@110sassactual What if the barrel was shot out?
are you sure it is not a 13 inch gun ?
Correct
😎🤙🏻🇺🇸
Just because a gun can run without oil doesn’t make it a good idea..
I definitely agree lol
🤤
Xoxo
12 inches on soft...
Tehehehe
Wondering if he can use these guns and ammo as a tax write off ? It’s all part of his business expenses right ? Like tires and oil and shit for truck drivers. Seems like he should be able to
It wouldn’t matter because you have to make money in order to write off profit 💀💀😂
Haenel CR308 the best!
Just stopped by to say SASS is one letter short of spelling gay.
You will be so upset when trump wins
@@rocco9216 lol what? I love trump so much I’ve spent over 3 grand in getting all of us books since 2015 signed (3 in total), I have all his kids signed books, and I even got Ivana trumps raising trump signed from the publisher! I adore that man. But sass is one letter short of so gay
Sass said he would only be gay with you and he is pitching and you are catching. 👀
😂😂😂
@@frankcastle4435 Guess he better oil up his mitt then. lol
Trash
Thanks to Kiran and the TYR1 crew for allowing us to work on this rifle. Re-lasering the text and pic rails was a highlight to the build. 😅 Great run through by 110 SASS 🫡
Xoxo