I’ve always wondered how these sound !!!! I’ve actually always steered away from them because of the blue color 🤷🏻♂️🤷🏻♂️🤷🏻♂️. They just looked super cheap too me. I’ll have to get some to try in my daughters car. Thanks for the video
I put these Recoil REM ECHOs 6.5 components in and the Recoil RCX 6.5 coaxials on the Recoil DI550.4 amp. I'm High Pass filtering them at 120hz that gives 12db roll off to their Fs of 60hz. The same High Pass filtering on the coaxials. I set the tweeter passive crossover to the lowest setting db on the 2 pin. Giving them about 60 watts of real power to them and the sound WAY better than I thought they would. The are clean, articulate, and accurately represent the music I'm play. I use all lossless recording from a USB drive and man price to performance they are amazing. I paired these up with a Stinger 12 inch subwoofer combo with it's Stinger ported enclosure which is set to 1ohm by their wiring. The box is tuned to 35hz and I set to manufacture's specification the subsonic filter to 30hz. I'm using the Stinger MT1000.1 amp also. This set up tuned and balanced correctly for sound quality but can hit over 100 SPL. It surprises even the pickiest of so called " street audiophiles " 😉 When I tell them I have $800.00 invested total cost they walk away shaking their heads...You don't need to invest thousands of dollars if you buy great price to performance audio gear and know how to specifically tune it in correctly to your vehicle!
I'm blind and I'm using speak to text, but I have a timpano tpt500.4 which is a 500 watt 4 channel amplifier. I plan to use it with a pair of Recoil REM 6.5 inch component speakers in the front and use recoil echo coaxial 6x9s in the rear. Also could be wrong but I think you've made a review on Amazon and responded to a few videos on RUclips regarding your setup with the recoil speakers and amp. I was curious if you could make your own video or if there was a way I could reach out to you and ask for your help with this setup because you seem to be very knowledgeable from what my voiceover has read to me. I have some technical knowledge, but I just want to make sure that I'm setting up everything right and that it'll sound really good.
Put a set of these in my winter driver. Front, stock location. Old alpine 50x4 pushing them now and they jam better than the $120 infinity components I have in another car. These are worlds better than the $50 alpine components(1751s) which are terrible. Have a set of RF components that are about $100 that sound great but they had a major workout for a year or so daily and these Recoils are very similar as far as the build on the mid and tweeter. These fosgates are more for running off a deck, not so much a good amp. The recoils sounded clear running off an alpine HU but the punch of the mods really came alive running a solid 50wrms thru them. I’d recommend a decent inexpensive amp to push them. I’m running just the alpine hu, little alpine amp for these components and a pair of 20 year old fosgate 12s in the back Sounds surprisingly good. The recoils do sound just fine off a deck that has maybe 15 watts but the mid bass driver really gets punchy for a little 6.5 with 50 watts moving it. You can definitely run them off a decent deck or factory HU/amp and the tweeters just get louder with an amp. You do get more kick and I could crank em louder with the amp when my deck would just run outta juice and you get distortion. That was still pretty dang loud on just a deck. They’re good quality speakers and outperform many that cost 4 times as much. I’ve been cranking em long enough now that if they had some defect it would have shown up by now. Can’t go wrong with these. Just buy em
@@gregvandy34 I agree. I also had some Infinity reference and I thought they were okay until I got these!!! Got them on a 100 w a channel amp and they get plenty loud for most people. Mine are still going strong after all this time
I got the echo plus version, which take double the power and im impressed by them so far. They're white and got a fiberglass woven cone, definitely feel like quality for the 65 dollars i spent. Beforehand, i had some 300 dollar morels and they died on me so quick.
What was the rms voltage that was applied when you burnt the coil? Burnt coils are typically a sign of signal clipping. Higher wattage being applied than what the speaker is rated for usually rips the spider apart before it smokes the coil. Not always the case, but usually. Can you replicate this and measure voltage signals with a labscope so you can have and show hard evidence that you are testing it properly? Also, the free air environment is completely impractical for product testing. You can pop any speaker that way when you start throwing operating voltage to it. TS parameters matter, young buck. Glad to see you are into this at such a young age. You're going to master this field if you stick with it. Kudos, homie.
If i didn't know any better. These look just like a set of Boston Acoustics 6.2 pros. Right down to the crossovers. Those speakers were around 150.00 in 1999. Lets hope they sound half as good as The Bostons. The crosses are exactly the same right down to the case.
That's a very interesting observation, I have no experience with those Bostons, but I do plan on doing a review on how these sound. just giving them some time cuz I wanted them to break in so I can give them an honest review ,but spoiler alert ...you can't beat them for the money! Tweeters are bright imo.
@@thebrokebasshead9984 I set the tweeters crossover to the lowest db in their passive crossover. Tames them down pretty good. These components image really good in my suv...I'm impressed by them and so are a lot of other audio enthusiast I hang out with...My favorite tweeters are the M-shape reverse dome tweeters that Focal make but I just can't justify to my self spending $800.00 on a set of their components.
I have JL 6x9 i was gonna install but if I sell them I can probably do almost my whole system in recoil and still have better than stock sound lol bass by sundown
The woofers look like the Dayton audio buyouts on parts express, which I have 4 of and just ordered this recoil set Going to be interesting to compare.
Hay if you want good deals on that brand or subs go straight to the main source it's even cheaper your looking for a guy named Patrick he build subs and he works with the guy that design recoil. Look up robot underground on RUclips. And let the system building begin. 🎵🎶✌️👍💯 Hope that helps you out
Idk how much cheaper he would of been.. As for subs..I hope to get one of his w7 based 10s or 13s in the future, but getting known isn't what he's about.
@@thebrokebasshead9984 probably only a little cheaper but he would put extra stuff in he usually try to out do Amazon. I would think if you found a blown w7 for cheap it would be to much to get sub off him or you could get everything off him and build it your self that would save you some cash as well👍✌️👌💯🎶🎵
Bought infinity reference, very bright and no bass. Replaced it with these right away after a week. Got no regrets yet
They look packaged way nicer than most speakers.
Wow...wasn't expecting that. Woofer is moving pretty good. I actually commented on Robot Underground to see if he tested the Performance Series.
Those speakers are sick! I got two pairs and a red 600.1 for my twelves! Mad respect for recoil! Also I got all my recoil by the underground!
I would LOVE to get my hands on those as well!
So far i love everything recoil makes.
I’ve always wondered how these sound !!!! I’ve actually always steered away from them because of the blue color 🤷🏻♂️🤷🏻♂️🤷🏻♂️. They just looked super cheap too me. I’ll have to get some to try in my daughters car. Thanks for the video
I put these Recoil REM ECHOs 6.5 components in and the Recoil RCX 6.5 coaxials on the Recoil DI550.4 amp. I'm High Pass filtering them at 120hz that gives 12db roll off to their Fs of 60hz. The same High Pass filtering on the coaxials. I set the tweeter passive crossover to the lowest setting db on the 2 pin. Giving them about 60 watts of real power to them and the sound WAY better than I thought they would. The are clean, articulate, and accurately represent the music I'm play. I use all lossless recording from a USB drive and man price to performance they are amazing. I paired these up with a Stinger 12 inch subwoofer combo with it's Stinger ported enclosure which is set to 1ohm by their wiring. The box is tuned to 35hz and I set to manufacture's specification the subsonic filter to 30hz. I'm using the Stinger MT1000.1 amp also. This set up tuned and balanced correctly for sound quality but can hit over 100 SPL. It surprises even the pickiest of so called " street audiophiles " 😉 When I tell them I have $800.00 invested total cost they walk away shaking their heads...You don't need to invest thousands of dollars if you buy great price to performance audio gear and know how to specifically tune it in correctly to your vehicle!
I'm blind and I'm using speak to text, but I have a timpano tpt500.4 which is a 500 watt 4 channel amplifier. I plan to use it with a pair of Recoil REM 6.5 inch component speakers in the front and use recoil echo coaxial 6x9s in the rear. Also could be wrong but I think you've made a review on Amazon and responded to a few videos on RUclips regarding your setup with the recoil speakers and amp. I was curious if you could make your own video or if there was a way I could reach out to you and ask for your help with this setup because you seem to be very knowledgeable from what my voiceover has read to me. I have some technical knowledge, but I just want to make sure that I'm setting up everything right and that it'll sound really good.
@@zekk98 Why do you need car audio if you're blind man?
Put a set of these in my winter driver. Front, stock location. Old alpine 50x4 pushing them now and they jam better than the $120 infinity components I have in another car. These are worlds better than the $50 alpine components(1751s) which are terrible. Have a set of RF components that are about $100 that sound great but they had a major workout for a year or so daily and these Recoils are very similar as far as the build on the mid and tweeter. These fosgates are more for running off a deck, not so much a good amp. The recoils sounded clear running off an alpine HU but the punch of the mods really came alive running a solid 50wrms thru them. I’d recommend a decent inexpensive amp to push them. I’m running just the alpine hu, little alpine amp for these components and a pair of 20 year old fosgate 12s in the back Sounds surprisingly good. The recoils do sound just fine off a deck that has maybe 15 watts but the mid bass driver really gets punchy for a little 6.5 with 50 watts moving it. You can definitely run them off a decent deck or factory HU/amp and the tweeters just get louder with an amp. You do get more kick and I could crank em louder with the amp when my deck would just run outta juice and you get distortion. That was still pretty dang loud on just a deck. They’re good quality speakers and outperform many that cost 4 times as much.
I’ve been cranking em long enough now that if they had some defect it would have shown up by now. Can’t go wrong with these. Just buy em
@@gregvandy34 I agree. I also had some Infinity reference and I thought they were okay until I got these!!! Got them on a 100 w a channel amp and they get plenty loud for most people.
Mine are still going strong after all this time
Thanks for the video. I just ordered some.
They are fantastic for the $$$.
I hope to post a review soon, gotta trim the tweeters a bit for a flush fit. They are HUGE
I got the echo plus version, which take double the power and im impressed by them so far. They're white and got a fiberglass woven cone, definitely feel like quality for the 65 dollars i spent. Beforehand, i had some 300 dollar morels and they died on me so quick.
How do they sound compared to the morels?
@@thebrokebasshead9984 honestly bro, they sounds just as good for 20 percent of the price. I'm totally satisfied.
What was the rms voltage that was applied when you burnt the coil? Burnt coils are typically a sign of signal clipping. Higher wattage being applied than what the speaker is rated for usually rips the spider apart before it smokes the coil. Not always the case, but usually. Can you replicate this and measure voltage signals with a labscope so you can have and show hard evidence that you are testing it properly? Also, the free air environment is completely impractical for product testing. You can pop any speaker that way when you start throwing operating voltage to it. TS parameters matter, young buck. Glad to see you are into this at such a young age. You're going to master this field if you stick with it. Kudos, homie.
I've been doing this since 93.
If you're looking for a technical channel, you're in the wrong place. No test equipment here.
If i didn't know any better. These look just like a set of Boston Acoustics 6.2 pros. Right down to the crossovers. Those speakers were around 150.00 in 1999. Lets hope they sound half as good as The Bostons. The crosses are exactly the same right down to the case.
That's a very interesting observation, I have no experience with those Bostons, but I do plan on doing a review on how these sound. just giving them some time cuz I wanted them to break in so I can give them an honest review ,but spoiler alert ...you can't beat them for the money! Tweeters are bright imo.
@@thebrokebasshead9984 I set the tweeters crossover to the lowest db in their passive crossover. Tames them down pretty good. These components image really good in my suv...I'm impressed by them and so are a lot of other audio enthusiast I hang out with...My favorite tweeters are the M-shape reverse dome tweeters that Focal make but I just can't justify to my self spending $800.00 on a set of their components.
Boston Pro is still the best imo. Wish I would have kept a set I had.
Can you do a review on the recoil 4 inch speakers?
I would, but I don't have any use for a 4".
Where did you get the plugs for the wires that go to the speaker? I have a set of the 5.25 inch ones and I’m trying to figure out how to install them
I have JL 6x9 i was gonna install but if I sell them I can probably do almost my whole system in recoil and still have better than stock sound lol bass by sundown
I listened to the sound test with my beats ordered 2 pairs lol
They’ve gone 7$ up since then not that bad
What is the beat setting for the crossovers
I have used 2 of the amps and they do more than rated power
I bought 4 sets of HIPHONICS COMPONETS 37.99 A SET VERY SIMILAR
The woofers look like the Dayton audio buyouts on parts express, which I have 4 of and just ordered this recoil set
Going to be interesting to compare.
Nope not the buyouts
Component set sounds great, mostly the tweeters ! But very great for what I paid!
How are these holding up?
They are still rocking in my car!
Is this a good deal on a stock head unit
I feel like they would definitely be an improvement
Hay if you want good deals on that brand or subs go straight to the main source it's even cheaper your looking for a guy named Patrick he build subs and he works with the guy that design recoil. Look up robot underground on RUclips. And let the system building begin. 🎵🎶✌️👍💯 Hope that helps you out
Idk how much cheaper he would of been..
As for subs..I hope to get one of his w7 based 10s or 13s in the future, but getting known isn't what he's about.
@@thebrokebasshead9984 probably only a little cheaper but he would put extra stuff in he usually try to out do Amazon. I would think if you found a blown w7 for cheap it would be to much to get sub off him or you could get everything off him and build it your self that would save you some cash as well👍✌️👌💯🎶🎵
@@josephsaucedo8691 Good idea. They also work in small boxes.
6x9 sucked. No bass at all. Factory speakers sounded better. Returned and bought sonys.
You found recoil 6x9s?
@@thebrokebasshead9984 they have 6x9 4ways on Amazon.
You can increase the bass by adjusting the EQ's.
These are component speakers for mids and highs only
ROBOT!!
Ya I'll have to hit him up next time I need some recoil stuff.