The ULTIMATE Underwater Housing Set Up Guide
HTML-код
- Опубликовано: 24 июл 2024
- Learn how to set up a Nauticam housing. This video covers underwater housing maintenance, installing your camera and lens, setting up a port system, and attaching underwater lighting. If you still have questions, make sure you email us at sales@bluewaterphotostore.com.
We have the best service in the industry and each purchase comes with a free zoom set up call!
Support our content and make your next underwater photo gear purchase at Bluewater Photo: www.bluewaterphotostore.com
Join one of 25 "Travel with Bluewater" trips we run every year, including diving, whale snorkel and safari trips - many with photo & video workshops: www.bluewaterdivetravel.com/g...
Check out our camera care kit: www.bluewaterphotostore.com/B...
Get your microfiber cloth-towel here: www.bluewaterphotostore.com/b...
Jump to a Section:
0:00 - Introduction
1:35 - Maintenance and Orings
7:00 - Opening and Closing the Housing
7:55 - Installing Your Camera
10:25 - Installing Your Zoom Gear
13:24 - Installing a Flash Trigger/Sync Cord
15:17 - Explaining The Leak Detection System
15:57 - Installing a Vacuum Valve
18:10 - Installing a Port System
24:32 - Running a Vacuum Test
28:00 - Setting Up Arms, Clamps, and Strobes
33:45 - Setting Up Fiber Optic Cables
36:39 - Adding a Lanyard
37:40 - Conclusion
#underwaterphotography #scubadiving #underwaterhousing #underwaterstrobe #underwaterphotogearsetup Развлечения
Thank you so much for this tutorial, it's a life saver 🙏🙏
always happy to help!
Great video Nirapam, thank you!
This is really helpful, though I have successfully puzzled my kit together and apart a few times, I just got a “new to me” zoom gear and this video helps a bunch with understanding setting things, up including the extra pieces.👍
I'm so glad this helped!
I need help. I have a flash trigger 26302 from Nauticam and Weefine WFS07 hybrid flash/video strobes. When I turn on my flash trigger it blinks green for a few seconds and immediately goes to red even though the batteries are new. And I can't get my strobes to flash mode, tried everything. What could be the problem?
It sounds like the flash trigger might be the issue. We have seen Nauticam flash triggers have this issue before out of the factory. It's usually because the contacts are having difficulty touching. Please try taking the batteries out of the flash trigger and adding them again. If it continues to turn red please give us a call at 310-633-5052 or email us at support@bluewaterphotostore.com and we are happy to help!
Other than fresh water soak and o ring clean and lube what other nauticam housing cleaning/ maintenance do you recommend? De-salting spray from boating store?
Hi! Great content but I have a question. Aren’t you concerned about getting grease on your lenses with using one towel to wipe down your system and clean o-ring grooves?
We recommend two separate towels for that! One for cleaning the o-ring grooves and one for wiping off ports....and probably another cleaning lenses :)