Craziest SQ(L) System PART 2 - Midrange and Tweeter Installation in VW Amarok - Steg & ESB Audio
HTML-код
- Опубликовано: 10 мар 2022
- If you want to see behind the scene content and learn more:
/ pssound
Playlist of This Project:
• Craziest? SQ(L) System...
The 1st Tuning Video of This Van with the Previous System:
• SQ in Cars - PART 9. -...
Social:
/ pssounduk
/ pssound_uk
Website/webshop/contact:
www.pssound.co.uk/ 
Авто/Мото
I'm watching to this playlist and listening along on my cellphone (Google Pixel 8), and even through cell speakers I can grasp how well, open, and round this audio sounds 👌
Can't wait to finally delve into my own, by myself, as a total SQ and audio fabrication beginner 😅 (I've installed, but only using factory locations and pods, I'll be going crazy, I'm ready for the challenge 😬)
I have the passion. Always did. Started in the early 90's, took a break for 27 years but back in the industry and absolutely loving the results of modern equipment.
Your builds are highly motivating.
I am so glad you explained the time of labor, a lot of people do not understand that and when you give them a price for your labor they just think it is to much. nice job on the work!
Well in most simple installs there isn't a need to do all this
Bellissimo lavoro complimenti, un saluto dall'Italia.
Grazie mille
i didnt skip.. watched it full. 👍 always a good knowledge sharing peter
killer as always!
Another top install, I like these longer videos.
The sound wizards. sweet work on that dash man.
Great work guys!
Edy is the man and vacuum hero 😉
Glad I found the channel! Subscribed. I have a lot of videos to catch up on.
Du bist der beste
i totally agree. time lapsed made it look somewhat easy, but i understand how grueling and tedious they were doing such jobs yet look how beautiful the outcome then. and how magnificent they sound in the end. and that's absolutely you'll get what you had paid for, totally worth it imho.
if only i have the money, and living across the planet what made my dream to have those killer gears somewhat seems impossible.
keep on inspiring mate. cheers! 🇵🇭
SQ can be achieved with cheaper gear too. It just needs a great system design and great installation. Then of course the tuning. Where do you live? I can’t figure it out from the flag.
@pssound9749 yes, i have now a fairly decent setup which i did myself that sounds quite good and happy. but having those setup just like with yours is my ultimate dream though.
i'm your number 1 fan from the philippines :)
Epic
No Brasil ñ se ve montado num carro assim com todo esse nivel de cuidados
can you do a video how to make speaker rings? they look so good
Hi, i’ll keep it mind the next time, although these days we make rings with a CNC machine.
Caramba k trampo da hora
👏👏👏
❤
TWO EIGHTEENS
AWAAAAHHHHT
Impresionante estoy usando sinfoni opus grandioso, pero mi próxima instacion será steg mss ultra o esb 9000 con amplificadores puré o ultra 2.
I have midranges on same spot. on my car bad reflections start to build up 2.7k.
i've built a few pillars with mids in them, mostly on axis, and dealing with reflections off of the side windows is always an issue. for dash mounted mids like this, i suspect the relfections are so early that they're virtually indistinguishable from the point source, right?
Correct.
Is it "bad" to put the tweeters in the dash next to the mid? Is reflecting off the glass that bad for imaging?
Would dash build be a poor idea for a coax speaker like illusion C3CX? Same question for doing wideband application. Idk if having tweeter or high freq reflecting off windshield is ok? Great video Peter 👍
Widebands work well against windscreen, but haven’t done a coax/tweeter that way.
Hi Peter, thank you so much for all of your videos! You do a very good job on the builds as well as on educating your audience.
Since you’ve used Steg as well as Micro Precision in your builds, may I ask which one would be your choice for an active setup with the mids and twitters in the pillars? I’m looking to compare the Steg MSS line with Micro Precision’s 7 series mid-bass and twitters plus their 5 series mid-range.
The prices are pretty much similar, but the Steg look a bit better to my eyes. Also, the smaller magnets make the Steg more practical, especially on the mids. However, sound quality would trump any other advantage, so could you please compare the two?
Hi,
7.16 is slightly bit more accurate in midbass range, almost negligible, but MSS6 can have a bit more abuse. If you want any of them in 2way, then 7.16’s midrange is better.
MSS3 is a 4” midrange, so it’s not fair to compare to MP 3”. They are both grate in their own way.
Tweeters are rather different. MSS1 is more transparent and detailed, while 7.28 is more natural and smoother, more ideal for a 2way system too.
@@pssound9749 I think I'll go with the MSS from Steg. I'll do a 4-way active system with the three Steg MSS components and for bass I'll use Audison APS 8 D subs in the doors, below the mid-bass (in its own separate enclosure). Thank you very much for your input!
Hi Peter, why the Hertz tweeters (I guess ML serie) was replaced by steg ? wasn't they enough quality wise or just a matter of cutover point with updated Mids ?
We used the ESB 8.028 tweeters. Hertz ML is good, but we were looking at getting something that has more revealing power, more detailed and under £5-600 there is not much else.
@@pssound9749 thanks for the detailed answer, make sense. Love your vids and channel and I’m always amazed with your build ! A shame your so far … (Belgium here), All the best
Went to .25 speed and it was still fast. lol
Sanding filler past the green stage is the worst.
Hi Peter, what tweeters and mid bass have installed in this set.
ESB 8000 series tweeter with Steg MSS3 mids and Micro Precision 7.16 midbass
@@pssound9749 okay, whether going with ESB 8000 or MSS1, MSS3 & MSS6 are they good to go with, are they tonally warmer in nature?
LOL.. Make it pretty? When u first installed the speaker flush I was surprised how good that looked with no ring.. I would be tempted to leave that. Well if it was my daily driver. Not a competitive install.
Hi Peter, do you 3d print with PLA or ABS?
Strictly ABS for cars.
@@pssound9749 thanks