Thanks for this video.. I learned a lot from this YT video! PS. I presume from your accent you are in England with a UK spec car... If you are in a country with righthand drive you will find the reversing lamp/bulb in the same handed fitting (righthand looking at the rear of the car) that you took off. If you are replacing the reversing lamp in a UK model (the reversing lamp is only on one side of cars now) and it is in the left hand fitting. Thanks again 👍👍👍👍
Need some help so I did this and changed my led bulb however when it came to putting it back on the tail light now seems to not go in properly it’s slightly out and isn’t in the same position and the other side anymore
Headlight and high beam are two separate H7's. I did a LED Conversion no space for most have to have the bendable copper strap heat sink type to bend in to fit. Also need to go on Alixpress and buy a new rubber cap that sticks out like a cup. The reverse light and front and rear blinkers are all BAY15D
Need some help so I did this and changed my led bulb however when it came to putting it back on the tail light now seems to not go in properly it’s slightly out and isn’t in the same position and the other side anymore
Thanks without this I would of struggled!
Thank you.I was able to change mine with the help of this video.
Thanks, glad it helped.
Thanks for this video.. I learned a lot from this YT video!
PS. I presume from your accent you are in England with a UK spec car... If you are in a country with righthand drive you will find the reversing lamp/bulb in the same handed fitting (righthand looking at the rear of the car) that you took off. If you are replacing the reversing lamp in a UK model (the reversing lamp is only on one side of cars now) and it is in the left hand fitting. Thanks again 👍👍👍👍
Amazing video bro
thank you so much man
Surely you can remove carpet by removing trim and not cutting?
the cut is already half there from factory, you just need to finish it off
Need some help so I did this and changed my led bulb however when it came to putting it back on the tail light now seems to not go in properly it’s slightly out and isn’t in the same position and the other side anymore
Thanks bro
String is genius
Do you need to push that spring screw in and turn it?
No, just turn it, all the spring does is keep it in tension.
what fittings are all the bulbs? thinking about changing mine to LED
sorry, can't remember!
Could you please the fitting and let us know what reverse light bulb and indicator bulb look like. Thinking of changing to LED.
Headlight and high beam are two separate H7's. I did a LED Conversion no space for most have to have the bendable copper strap heat sink type to bend in to fit. Also need to go on Alixpress and buy a new rubber cap that sticks out like a cup. The reverse light and front and rear blinkers are all BAY15D
How to get the white spring back its fall down in the chassis?
Did you find a way mine fell down also
@@Erkiiii good luck have fun buying new white spring there is no way you get that out unless you pull of the rear bumper best for you is to buy it
Where’s the best place to order a replacement white spring? (Uk based). Thanks for the video.
did u find out where to get a replacement? mine fell also
Need some help so I did this and changed my led bulb however when it came to putting it back on the tail light now seems to not go in properly it’s slightly out and isn’t in the same position and the other side anymore