I make sure the truck is level or slight incline from the front. Let it idle long enough for the thermostat to open up. Make sure the heater is on and blowing inside the cab. Keep pouring coolant in until it's level with the neck of the radiator. Fill overflow tank to full level after driving on level surface.
You should show the process while you are actually removing them the parts one by one ,but you are showing the removed parts after you have removed them without us being able to see how you removed them step by step , just would be better to show all the details .
I watched several videos on doing this task, and by far, your guide was the best and most complete. Thank you for putting this great video together!
You are very welcome and glad it helped you out.
great vid. Thanks. Also glad you did not add annoying music that too many other vid makers do.
No problem! Thanks for watching. Hope it helped.
This video is really useful. TYSM.
You're welcome!
Really good and helpful video and instruction.
I appreciate that. I'm glad I could help.
Good job. Thanks for the video and good luck!
Thanks!
Great video! Thank you for sharing this information!
Glad it was helpful!
bel lavoro,grazie per il video
You are welcome!
Great video thanks!
You are very welcome.
Hi do you bleed the air from the system
I make sure the truck is level or slight incline from the front. Let it idle long enough for the thermostat to open up. Make sure the heater is on and blowing inside the cab. Keep pouring coolant in until it's level with the neck of the radiator. Fill overflow tank to full level after driving on level surface.
Excelent tks
Thanks!
how much coolant does it take
About 2 Gallons. Get 3 just to be safe. 50/50 mix
Annnnnnd after removing the skid plate, oh look! I can get to the lower hose now from underneath the car.......
Sure can.
Put hose and clamp on before mounting the thermostat to engine.
Good tip!
You should show the process while you are actually removing them the parts one by one ,but you are showing the removed parts after you have removed them without us being able to see how you removed them step by step , just would be better to show all the details .
Yes, I agree with you. I've been getting better at the videos from when I first started. I need to get a tripod as my extra helper.