It is easy to do with any tool you are unfamiliar with. I have spent a lot of money trying to learn different things. Education costs a lot no matter how you learn
I serviced a Z335e and after i was finished I was finished, i was driving it up to wash it off and it shut off. Nothing will work. I pulled the battery and its fully charged. After pulling the cover I found multiple wires damaged by mice. Do you suggest I follow your example and replace the harness ? I appreciate the video.
The harness is damaged very similar to the one you show in the video. They park it in a horse barn and the mice had made multiple nests under the cover.
It was all bedded up but nothing chewed luckily able to get away without further repairs. I believe with a tune up and all of the repairs/wiring harness and other parts it was around $1,000
good video! We have same wont start all sensors replaced relay replaced no bad wores we can find fuses are good we are thung a new harness. Pto switch is good also. Any ideas? Batterybis good also.
I would test voltage everywhere and see if you get anything at the solenoid before doing the harness. Do a full electrical diagnosis before but it is definitely possible
Mine is beginning to start intermittently. Any suggestions? Sometimes I turn the key it cranke other times it doesn't. Once its been started and warmed up its good. 5 years old. Battery??
If the battery is 5 years old I would definitely have it tested and check the connections at the battery / solenoid for corrosion and make sure they are tight
Mines went out on a job about a month ago. John Deere wants to charge half of the cost of the mower for repairs . Can you give me a list of the parts that you replaced and where you ordered it from. Thanks in advance!
One of the switches being bad on it will cause this issue. Parking brake must be down before pulling them in. Does it die if you let the parking brake off without pulling them in?
@@IndRepair mowermedic-1 is the only one that shows working on grASSHOPPERS. any and all would be greately appreciated for all grasshopper owners. just nothing out there. thanks. i have 2003 725 G2. with 3 cyl kubota gas water cooled engine. changed cap-rotor-wires last year...wow sure could have used a video...
Good Example of battery powered ratchet use. I am there now. But I busted a lot of stuff on the learning curve. Keep em coming !
It is easy to do with any tool you are unfamiliar with. I have spent a lot of money trying to learn different things. Education costs a lot no matter how you learn
Nice job I have the exact mower it's 5 yrs old now with approximately 288 hrs on it runs like a champ.
Awesome! Thanks for watching
Great video again. Your processes are very helpful.
Thank you!
Glad to help
Nice work, I don't like working on mice machines. Thanks for the video.
It sure gets that smell up your nostrils. It was even better when I got it sprayed all over me when pressure washing it!
Thank you so much , helped me out tremendously
Awesome news!
Thanks for the information. Very useful.
Thanks for watching!
Those dirty rats (mice)! Great video. Enjoyed watching!
Thanks for watching and for your comment!
Good work and diagnosis.
Thank you for watching and for your words of encouragement!
Great job! I have a new John Deere Z530M, looks like I need to be careful where I store it between use.
A couple bags of moth balls, one on the engine and one under the battery or storage compartment should do it
Thank you!
I would also recommend taking those plastic covers off for storage and leaving the seat up.
Good tip
New harness and a hungry cat...
Miss my Skil by Bosch 1/4" cordless ratchet. Was quite a bit smaller than current offerings.
For sure! I loved my Matco 1/4" ratchets but they keep having issues so I decided to replace them
I serviced a Z335e and after i was finished I was finished, i was driving it up to wash it off and it shut off. Nothing will work. I pulled the battery and its fully charged. After pulling the cover I found multiple wires damaged by mice. Do you suggest I follow your example and replace the harness ? I appreciate the video.
I would recommend this over repairing but sometimes you just got to do what you can do
The harness is damaged very similar to the one you show in the video. They park it in a horse barn and the mice had made multiple nests under the cover.
@@pastorchrisdavidson7153 Definitely replace the harness. They sure love this mower and it nooks/crannys
Nice job man. Did you find anything under the cover? Can i ask how much that cost with the new wire harness?
It was all bedded up but nothing chewed luckily able to get away without further repairs. I believe with a tune up and all of the repairs/wiring harness and other parts it was around $1,000
good video! We have same wont start all sensors replaced relay replaced no bad wores we can find fuses are good we are thung a new harness. Pto switch is good also. Any ideas? Batterybis good also.
I would test voltage everywhere and see if you get anything at the solenoid before doing the harness. Do a full electrical diagnosis before but it is definitely possible
Thanks I let them know to do continuity on the harness. No power to relay.
Hope they got it fixed up
Mine is beginning to start intermittently. Any suggestions? Sometimes I turn the key it cranke other times it doesn't. Once its been started and warmed up its good. 5 years old. Battery??
If the battery is 5 years old I would definitely have it tested and check the connections at the battery / solenoid for corrosion and make sure they are tight
Mines went out on a job about a month ago. John Deere wants to charge half of the cost of the mower for repairs . Can you give me a list of the parts that you replaced and where you ordered it from. Thanks in advance!
Brand new the pre 2023 jd 335 had a laundry list of issues !!! But hey all it has to do is cut the grass right.
Definitely!
I have a 335e, will shut down if you pull both steer handles, what should I look for
One of the switches being bad on it will cause this issue. Parking brake must be down before pulling them in. Does it die if you let the parking brake off without pulling them in?
do you work on grasshopper ?
Yeah quite a bit
@@IndRepair please show videos.....nothing much out there
For sure, anything in specific you are looking for?
@@IndRepair mowermedic-1 is the only one that shows working on grASSHOPPERS. any and all would be greately appreciated for all grasshopper owners. just nothing out there. thanks. i have 2003 725 G2. with 3 cyl kubota gas water cooled engine. changed cap-rotor-wires last year...wow sure could have used a video...
Those Kubota engines are rock solid and will run forever if taken care of. That's a job!
Nice job i hate mice.🤣🤣🤣
They sure make a mess!
Same thing has happened with mine. Goddamn rats. In the exact same spot
Crazy! Rat food! 🐀