Hi - Thank you for the video. Did you check to make sure you did not insulate the bottom channels at the base of the interior. Some of these are used to move water and should not be insulated or obstructed.
Good tip, I only insulated the side walls down to the base, so the bottom channel is unobstructed. Thinsulate is also hydrophobic, so should be all good. Thanks for watching : )
Can you give some insight as to the swivel base you added and why the trac needed cut shorter? I just bought a Ford Transit, so very curious about this
I installed scopema swivel seats for both the passenger & driver seats. It's not totally necessary, but trimming the seat rails prevents them from scraping the plastic of the doors and allows for a smoother swivel. Here's a great reference for the installation: faroutride.com/swivel-transit/. I followed this guide. It details it all pretty clearly. Good luck!
The legend is back. The work you’re doing is so impressive dude - keep it up! See you at 6:00AM
Thanks mayn
Hi - Thank you for the video. Did you check to make sure you did not insulate the bottom channels at the base of the interior. Some of these are used to move water and should not be insulated or obstructed.
Good tip, I only insulated the side walls down to the base, so the bottom channel is unobstructed. Thinsulate is also hydrophobic, so should be all good. Thanks for watching : )
Can you give some insight as to the swivel base you added and why the trac needed cut shorter? I just bought a Ford Transit, so very curious about this
I installed scopema swivel seats for both the passenger & driver seats. It's not totally necessary, but trimming the seat rails prevents them from scraping the plastic of the doors and allows for a smoother swivel. Here's a great reference for the installation: faroutride.com/swivel-transit/. I followed this guide. It details it all pretty clearly. Good luck!
@@crowlsyung awesome. Thank you so much. The detail and pics are great!!!