Bonus for the Poly-ash - Duration or any Boral trim, because it doesn't expand/contract you no need paint the ship lap or T&G edges prior to install. There won't be any "raw wood" showing when it shrinks, because poly-ashsh doesn't move. 1/32+ on 16'. Great Product. Heads up there is a learning curve in handling it to avoid breaking the mouldings etc.
Watch out for the electrical boxes with flanges, because they bulge the drywall. They're super important for the interior air barrier, as you described, so you gotta recess a section of the stud a bit for the electrician, or mount multigang boxes on blocking that's ripped to the right width. Most people wouldn't notice the flaring of the wall, but I do.
@@pjevans1830 I've been trying to guess what the video doc budget alone is ,,,, Then I got stuck on the changes in material for the utility hole gap foaming budget ,,,,
@Al S When you're building a home as complicated and detailed as that I think it would be impossible to have a hard budget. Estimate and then time and material is the fairest way to go in my opinion. I guess the other option would be tons of change orders.
When I like something, I focus on every little detail. And that is why I like this channel because the care, the love and the passion is here. I love watching it. Blesses to your team and work you guys do.
Looks so good! It’s like I have a ten page questionnaire to ask potential builders😅 “How do you do X? What method do you prefer for Y?” Question on this house: What are the in-line fans for? The laundry/dryer vent?
One of the houses I just worked on had the inline fans instead of having the loud traditional vent fans in the bathrooms, it was a really nice detail that I hadn't seen before 👍
That framing looks very nice. Do you do a full pan and drain in the 2nd floor laundry room? Linear drain done with Schluter on the back wall behind the machines is trick.
great job. i like the use of Rock Wool. stable, non-combustible, and i would assume inert. regarding the spray foam in the roof, and some of the new glues and chauling being used, has consideration for "off-gassing" toxic airborne chemicals. is there a way to measure that and since the house is so well sealed, that the captured gas does not impact residents health. also have the fire rating been checked. sometimes i like to subject a mockup of a component to on-site fire test to understand where the components are vulnerable.
Amazing attention to detail! I noticed you used quite a bit of flex pipe for your hvac system. Hard pipe is far superior to flex, any reason why you’re using flex over hard pipe? thanks!
Everything about this build has been beautiful, bespoke quality. It made me sad to see the hacking of the plywood to fit the load center. Of course it will look fine on finish, but shame on who ever cut it, and didn’t bother to keep the cut square and neat.
@@keithcoleman4800 from the CDC Fly ash is a very fine, powdery residue from coal-fired plants (like factories). Fly ash is captured in the stack. Onsite coal ash ponds should mainly consist of fly ash, which is made up of heavy metals (for example, mercury, arsenic, copper, and chromium). Fly ash may pose an inhalation hazard when dry. Dry fly ash can cause respiratory irritation similar to flu-like symptoms. Heavy metal poisoning is already well known
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
The attention to detail and the care in these houses is astonishing. All builders should strive to be at this level.
If they did nobody would be able to afford a house.
@@youtert hahaha true true.
I think construction cost of this house alone might be over 2M.
Oh my goodness why didn’t RUclips recommended earlier. I love this channel. So much to learn thank you.
Bonus for the Poly-ash - Duration or any Boral trim, because it doesn't expand/contract you no need paint the ship lap or T&G edges prior to install. There won't be any "raw wood" showing when it shrinks, because poly-ashsh doesn't move. 1/32+ on 16'. Great Product. Heads up there is a learning curve in handling it to avoid breaking the mouldings etc.
Watch out for the electrical boxes with flanges, because they bulge the drywall.
They're super important for the interior air barrier, as you described, so you gotta recess a section of the stud a bit for the electrician, or mount multigang boxes on blocking that's ripped to the right width.
Most people wouldn't notice the flaring of the wall, but I do.
Absolutely insane detail…can’t even imagine the budget on this
$500 / sq ft ? just guessing
No real budget. They might have a project ed budget but I bet they run way over.
@@pjevans1830 I've been trying to guess what the video doc budget alone is ,,,,
Then I got stuck on the changes in material for the utility hole gap foaming budget ,,,,
@Al S When you're building a home as complicated and detailed as that I think it would be impossible to have a hard budget. Estimate and then time and material is the fairest way to go in my opinion. I guess the other option would be tons of change orders.
When I like something, I focus on every little detail. And that is why I like this channel because the care, the love and the passion is here. I love watching it. Blesses to your team and work you guys do.
Collaboration: always seems to give the smoothest - Best jobs.
Thanks Nick i learn a lot from your videos.
Good forward thinking, love the attention to details.
what a beautiful home great work as usual!!
Appreciate the explanation to detail and fine homebuilding!
Looks so good! It’s like I have a ten page questionnaire to ask potential builders😅 “How do you do X? What method do you prefer for Y?” Question on this house: What are the in-line fans for? The laundry/dryer vent?
One of the houses I just worked on had the inline fans instead of having the loud traditional vent fans in the bathrooms, it was a really nice detail that I hadn't seen before 👍
Great video!
That framing looks very nice.
Do you do a full pan and drain in the 2nd floor laundry room? Linear drain done with Schluter on the back wall behind the machines is trick.
great job. i like the use of Rock Wool. stable, non-combustible, and i would assume inert. regarding the spray foam in the roof, and some of the new glues and chauling being used, has consideration for "off-gassing" toxic airborne chemicals. is there a way to measure that and since the house is so well sealed, that the captured gas does not impact residents health. also have the fire rating been checked. sometimes i like to subject a mockup of a component to on-site fire test to understand where the components are vulnerable.
Amazing attention to detail! I noticed you used quite a bit of flex pipe for your hvac system. Hard pipe is far superior to flex, any reason why you’re using flex over hard pipe? thanks!
Can you tell us about your close out SOP?
How would this compare in price to shingle siding?
Intentionality is the difference. Looks like Mike builds the job backwards from finish.
Everything about this build has been beautiful, bespoke quality. It made me sad to see the hacking of the plywood to fit the load center. Of course it will look fine on finish, but shame on who ever cut it, and didn’t bother to keep the cut square and neat.
Maybe exxplaine what a fly ash product is when when you explain what a fly ash product is
no scaffolding!
Someone tell the guy cutting that siding that fly ash dust is bad for your lungs
Untrue - It's a nusiance dust and is not dissimiliar from a wood dust. Like any dust, basic dust protection is still a good idea.
@@keithcoleman4800 from the CDC
Fly ash is a very fine, powdery residue from coal-fired plants (like factories). Fly ash is captured in the stack. Onsite coal ash ponds should mainly consist of fly ash, which is made up of heavy metals (for example, mercury, arsenic, copper, and chromium). Fly ash may pose an inhalation hazard when dry. Dry fly ash can cause respiratory irritation similar to flu-like symptoms.
Heavy metal poisoning is already well known
Why are all the nails exposed on the siding, is that a typical nailing procedure for that product?
talked about in the video ,,,
Wheres the materia videos. Theyre MIA