Hyundai i10 Changing Oil and Plugs
HTML-код
- Опубликовано: 29 окт 2024
- Hyundai has grown in leaps and bounds over the years, especially here in Cape Town,
It's compacts have become very popular with the constant increases in our petrol prices.
In this video I will show you how to do an oil and spark plug change on a Hyundai i10, enjoy the video,
LIKE, SHARE and SUBSCRIBE for more such useful videos, until my next video, Safe Motoring. 
Авто/Мото
Since we are in a lock down and the oil in my 2009 i10 needed changing, I did it myself after watching your video. Thank you for posting it, very helpful.
For non mechanics or new diys this was such an easy thing to follow, well presented.
Thank you very much for your support and positive feedback, it is really well appreciated.
Good video sir.. I got one i10, now feeling confident about doing the same myself. Only worry is lack of required tools which I will procure soon.. thank a lot for the video.
Thanks for supporting the channel with your visit Moncy, when you acquired the proper tools go for it.
@@vehiclemaintenanceandrepai3790 sure, thank you..
It can't get any clearer than this.. well presented thanx man
Thanks for supporting my channel George I am glad you found value in the videos.
Did my own service today, the oil filter gave me a run for it I had to go buy a wrench. With doing so I picked up lots of missing bolts from my car. Thank you but I must say they sure know how to super tighten some bolts was worried about my threads😔
Thank you so much for posting! im going to service my Hyundia as soon as im allowed out!
Thanks for supporting the channel with your visit Marc, all the best with servicing your Hyundai.
Very Helpful informative video. Nice and simple. Like to see some more videos on Hyundai i10. Big ThnX to u Sir.
Well explained sir and looking forward to see more videos on i10.
Thanks for the support Mallen, I am glad you found value in the video. Gary
@@vehiclemaintenanceandrepai3790 thanks Gary sir for making such a wonderful video. I have seen many videos on RUclips but your video covered all tips and tricks how to do the job professionally. I have an Hyundai i10 AT and love to see more videos from you.
There is more on the i10 in post-production, Mallen, so keep an eye out.
excellent easy to follow instructions
Hi. I would like to service my own car. Is it safer to buy steel ramps or the ratchet type jacks that i see u use
Great video cheers
Thanks for the support Clive I am glad you found value in the video. Gary
Great video!
Good video, one question, except using engine flush i believe you can use diesel, is this true and whats the procedure?
One could use diesel John, but I never believed in it, nor tried it so I could not tell.
My love to RSA!!!
Thanks we can always do with more love.
Nice work
Thanks for the support Shaik, check out my website here
www.vehiclemaintenanceandrepairs.com/
Sir, do you know where to locate the camshaft sensor? Got the same car but i am not sure where to find it and keep getting p0340. I want to try cleaning the sensor with contactspray. And is it a DIY thing to do?
The camshaft sensor is located next to the exhaust manifold (to the right when standing in front of the car ), cleaning it may help, it is just a 10 mm head bolt holding it in, be careful not to break or damage when you remove it as it has been there a while and may be stuck. It is a sealed unit, so a good wipe with a cloth would do just fine, you can use carb cleaner too. Good luck DoltLikeATruck
@@vehiclemaintenanceandrepai3790 Thanks a lot!!
@@vehiclemaintenanceandrepai3790
Got myself more tools. Cant reach it with mine. Ok cheap tools but i hope it does the trick.
www.hbm-machines.com/producten/gereedschap-en-toebehoren/doppensetsgereedschaptoebehoren/hbm-108-delige-12-doppenset?channable=e13762.TVBOODQ1MQ&gclid=CjwKCAjwxLH3BRApEiwAqX9arWwQ_8aSpGrm_udD6qYxHhv51HUYp3paCEYPKZc-OmkBqKFpXepenxoC0bsQAvD_BwE
Thanks a lot!
Thank You !!!
Great to see you like the video Israel, thanks for the support
After adding the engine flush, can I drive the car for a day before draining the engine
No, no ,no, Tseke, the oil is diluted by the engine flush, idle for up to 15 minutes only, then drain the oil as in the video.
Thanks you sir ! Please tell me what Part Number off Spark Plugs Hyundai i10 2011.
NGK PLKR7A 4, is the ones I use, Quang, hope this helps.
can also use BCPR6ES-11 if it is not a 1.2 engine
@@vehiclemaintenanceandrepai3790 thanks you very much sir
Sir ngk lk6F10 and ngk lk6d10e are same in my city market ngk lk6F10 are not available and ngk lk6d10e are available spark plug ,sir problem are not problem in my ertiga petrol car please Ripley me
How many miles/years til you replace the plugs?
If you are using long life Iridium Spark Plugs, it gets replaced every 60 to 70 thousand kilometres, using normal Spark Plugs, around 15 to 20 thousand kilometres.
Hi sir. What oil is suitable for the 2013 i10 1 1 gls motion?
Thanks
Katlego
Hi Tseke, 15w40, I normally use Shell Helix Hx5.
Hi what is the viscosity of the oil for i10 5w40?
15w40 Craig
Before I watched this video, I accidentally loosened a bolt near the oil filter of my 2010 Hyundai i10 1.2 (shown in the photo at drive.google.com/file/d/1OekkLWTHBKKuaWwLAcVSsa902JBo77so/view?usp=sharing). What is the function of the bolt and does it need to be torqued correctly?