Good vid mate.I got my 2018 Grom last xmas.First mod was the exhaust.I changed my stock heavy box for a ScProducts low stainless steal system and save over 3Kg.Then the AirBox mod for more torque again.Then I pulled my fork caps out and wound the nut on the centre rod up One Inch for more travel,better riding position and much better froks,better and better..Ride safe,Ride Grom.
I didn't see the side cover mod on your motor. I have the kitaco side cover and I consider it one of my best mods. makes the throttle more snappy, and oil changes easier. definitely worth it.
Idk certainly not an aesthetic mod but I swear by the Takegawa high flow oil pump, its so cheap and since we all push these engine to the Max constantly I think its very worthwhile for longevity. Just my 2c
Faith Riding Johnny I have the basic plate and the fit was perfect. The LED Intergraded tail/fender eliminator looks a lot better but here in Québec they want the flashers at a distance from each other. I have the low mount MNNTHBX exhaust and it's a beast, the balance is amazing. I need to fiber pack the baffles cause my ears bleed 😂
thanks for watching. I have no personal experience, but my buddy has them on his grom and he said they're amazing. they're lighter then stock and still provide good traction on road and amazing off road traction.
Tough question but a fuel controller intake and exhaust will.help you get to top speed but to increase it you'll need a bbk and most importantly changing the gearing of your sprockets
I have a lot more mods then what i talked about. these are just my favorite or top mods you should do first. I have the ohlins front fork internals done as well as the CARD mnnthbx rear shock.
"I don't know what this clear cover is made of, but it's super hard. Maybe like polycarbonate." Polycarbonate and plastic are the same thing, calling it something else doesn't make it "high tec".
Nice. That clear cover is also great for checking the quality of the oil and if it needs changing.
ahh that is a good note. never really thought of it for that purpose lol
How can i do that mod?
Found one here, if that helps? www.drowsports.com/otb-prototypes-honda-grom-125-cam-gear-cover/
Good vid mate.I got my 2018 Grom last xmas.First mod was the exhaust.I changed my stock heavy box for a ScProducts low stainless steal system and save over 3Kg.Then the AirBox mod for more torque again.Then I pulled my fork caps out and wound the nut on the centre rod up One Inch for more travel,better riding position and much better froks,better and better..Ride safe,Ride Grom.
I didn't see the side cover mod on your motor. I have the kitaco side cover and I consider it one of my best mods. makes the throttle more snappy, and oil changes easier. definitely worth it.
I would love to do it but per my regional race rules I'm not allowed to run that side cover. If not for that i would have it on already lol
Can't wait till I get a Grom.... Good vid man!! Love that intro
get one soon! thanks man.
I just love your videos buddy.
The clear cover! I need one!
Idk certainly not an aesthetic mod but I swear by the Takegawa high flow oil pump, its so cheap and since we all push these engine to the Max constantly I think its very worthwhile for longevity. Just my 2c
I shouldn't have watching this because I cant even ride in the weather we have up here. Now im sad haha. Nice overview man!
Thanks man! i could imagine the weather sucks up there....dude you should come to the smokey mountain crawl!!
That's a hard one. I'd say my Over Racing swing arm, over racing bars, over racing exhaust, over racing rear sets, and over racing frame sliders.
Your Grom has the perfect look just as it is! (IMHO)
Maybe it's because I know you race it but it has such a warrior look. Very cool!
It looks way cooler with the number plate =] I have changed the paint scheme on it so be on the look out for it in the upcoming video =]
MNNTHBX Dual Underbody Exhaust!! They make a great integrated turn signal too.
without a doubt, i love their fender deletes, i think thats what i'm going to replace mine with.
Faith Riding Johnny I have the basic plate and the fit was perfect. The LED Intergraded tail/fender eliminator looks a lot better but here in Québec they want the flashers at a distance from each other.
I have the low mount MNNTHBX exhaust and it's a beast, the balance is amazing. I need to fiber pack the baffles cause my ears bleed 😂
I know video ancient but I think the front finder pretty cool with the teal color
+Careless Chip thanks man but I had to change that and update the color scheme =]
cool vids man. what dunlop tires were u running for the track and what sizes?
100/90 for the front and 120/80 for the rear
i feel footpegs deserve a mention too ! stock ones dont let you lean
true true, i just was doing mods for the general rider/everyday rider lol
what kind of pegs are you using?
OMG yeah its some scary stuff when you leaning and your foot peg catches or rubs...smh
you forgot this badass headlights on the side of the actual light :O legit badass
=[ i have so many mods lol
As of now,im saving up for a 2017 Grom :D cant wait to get this sucker
Yewwww! Slowly getting my Grom there, thanks for the overview man.
I really dig those tires. Would that rear tire clear the rear mud guard?
yes it does, i took it off just because i didnt like the look with it.
Cool video, what’s the business card looking thing on your tank?
Hey I really liked the video and decided to subscribe. My one question is where did you buy the first 3
Do that rare finder mode stop the rain from shooting up you back.
my favorite mod is the koso cam upgraded valve springs and finbro ecu with 12.5k rpms.. my bike is 80+ mile an hour and im 190
How would you get more power out of the Grom? I want faster acceleration but also a bit higher power. Best thing for that?
hmm do a -1 sprocket in the front, and intake and exhaust. and if you have the coin to do so, get a pcv or bazzaz and get that sucker tuned.
MEATHEAD Sell this toy and buy real motobike,anything will be faster.
lol i did 800km on vrubs then went to pirelli's, i like em need to get me some pmt's for the track :)
thanks for the video bud. do you have experience with the maxxis 6024 tires? im considering going that route
thanks for watching. I have no personal experience, but my buddy has them on his grom and he said they're amazing. they're lighter then stock and still provide good traction on road and amazing off road traction.
Faith Riding Johnny thanks for the reply!
that os the direction that i am leaning towards. Anything must be better than stock!
I saw that wheelie bwah.
the only good recorded wheelie =/
JOHNNY!!! SUH DUDE
SUHH BRUHHHH!
Hey man! Any chance you still got those front halo signal lights?
I do not as I sold the bike a few years ago 🫣
So what I’ve heard is stock groms go 45 and I’d like it to go 50-60 if possible, and suggestions thx
You didnt talk about the OTB shift level...
how is it, worth the money ?
Would you recommend a new 2017 grom or a used 2015 cheaper model?
What's the highest speed a grom can do? I've tried to look it up SOL bro- new sub btw
The wheels are powder coated? also what was used to paint the fearings?😃 sick bike!:D
no those were just rattlecanned. thank you dennis!
I don't think I have a favorite mod I guess it's my or Grom just love them
all mods matter =] lol
I like the fender
nice bike bro 👍👍
Thanks Perro!
Man clean up that yard :D sexy bike by the way
Yeah just found your RUclips Channel :)
+Meddes eyy dude thanks 😁🖐
I own a Grom Clone \(^o^)/ paid 2000 for is, all the parts are direct bolt ones for Grom parts! But mine is Carb instead of Fuel Injected.
I know i know a buddy that owns one =] Unique little things lol
What you recommend as the best mods for improving top end speed?
Tough question but a fuel controller intake and exhaust will.help you get to top speed but to increase it you'll need a bbk and most importantly changing the gearing of your sprockets
I drive with the Vee Rubber, now. but in 1 - 2 Weeks i change on the Michelin because I´m Scared of the Vee Rubber! xD
my goodness, get rid of those quick!
How can I find the parts under your bike?
My favorite mod i have done HAS to be the dunlops, they are soooo sticky.
with out a doubt if i had to choose one mod to live with forever it would be those tires.
What type of chain do you have? With those sprockets?
did 420 with a -1 in the front and a +2 in the rear
How did you get the blue accents? Paint or decals or whuuut?
+hello chickenor paint =]
How many miles have you got on your Grom? I'm at 6,000. Good mod is s new chain.
i'm at 5k, and i changed my chain at about 2500, the stock chain kept stretching...
Are you using stock forks? or you changed to ohlins kit?
i am using the ohlins front springs and valve kit.
ty
Why not a smaller sprocket in the back?
What are those foot pegs called? Where can I get them?
Theyre just some raised pegs from ebay
Sah duuude
sahhh braaaaa
Which pro taper handle bar you are using ?
Honda mini
That’s not a stock seat is it?
How do I subscribe the video
Where did you get the seat?
I want Honda grow 💙
Whats the top end speed now with the -1/+2?
i think it ends up being around 65....
Faith Riding Johnny is that with a speedo healer or no?
Top speed?
I meant I guess it's my bbr exhaust
what do you think your top speed is
with the gearing probably around 67
Faith Riding Johnny but groms do 55 stock right?
Mihir Bhoir I've seen anywhere from 55 to 73. A bike that small, the weight of the rider is going to do allot to its top speed
Also I subbed... Obviously
What bars do you have ?
honda mini by pro taper
My favorite is my yoshimura exhausted
Those are pretty sweet little systems
My 2018 grom came with vee rubber:(
No front fork mod?
Mushy front forks seems to be the most common complaint in the mags.
I weigh 200 lbs, 6'2" so maybe its just me ;)
I have a lot more mods then what i talked about. these are just my favorite or top mods you should do first. I have the ohlins front fork internals done as well as the CARD mnnthbx rear shock.
I want a grom but I'm only 15. I need to save up for a few years
+Albert Hoelting keep saving man it'll be worth it !
bbk+turbo
"I don't know what this clear cover is made of, but it's super hard. Maybe like polycarbonate."
Polycarbonate and plastic are the same thing, calling it something else doesn't make it "high tec".
so...i should of called it a plastic cover?
I love ❤️ moto bro 💙💛
2:10 i think i just came in my pants
Is this rice🤔
Never understood why people cover license plates lol
Best mod ? Trade it for anything else !
Psh that's the worst thing you could do
best mods for grom step 1 buy a bike worth moding
2:15 fart can
Rich much?
For money you spend on this crap you can buy real motobike.