Thanks bro. The wheel spacers just came today. That was way faster than expected. Custom Offsets told me to expect 3 weeks. Only took like 5 days. I’m headed off on a vacation but when I get back in a few days I’ll put it on and do another video
I used 1.5 inch G2 wheel spacers with a 2.25 inch level kit to run 33x12.50 Stock 20's on a 2019 LTZ Z71. I had to do some serious trimming on that mud flap and took off the bracket that is set behind the mud flap. No rubbing at all. You should be fine after your SST Lift on there.
Thanks man. Appreciate it. Since then, I installed the lift and the 1/2” front hub centric spacers and everything is holding beautifully. It’s been about a year and the Recon Grapplers are wearing great and everything else seems fine too. Thanks 🙏🏼
1/4 inch wheel spacers for AutoZone I did quarter inch wheel spacers from AutoZone and had no problem with 35-in nano recon grasses 351150 20 on a high country and with a 3 1/2 inch leveling kit from rough country with a quarter inch spacer and still have plenty of lug nuts and never came loose I check in periodically for the last since 2021 or 2024 never had a problem I know what you're saying about not sitting on it which is sure why try to get you can't find a hub-centric wheel spacers only fit aftermarket rims not stock rims so make sure you check that out so you don't have to go through that as well cuz
Thanks for the advice bro. I found out that Bora makes hub centric wheel spacers for stock wheels that fit beautifully. They are carried by CustomOffsets.com. Great people over there. Also, the reason I had to run the wheel spacers is because of the Aftermarket Upper Control Arms that I am running. They are the replacements that I installed with my Ready Lift lift kit. The upper ball joint is a bit larger which caused a little bit of clearance issue between the upper ball joint and the inner sidewall of the tires on the front. Not too big of a problem to overcome but did require the spacers for more clearance. I love all of the modifications that I have done so far. Lift, tires, control arms, spacers and exhaust. All of them have worked perfectly. Thanks for the comment.
Looks good. i think I'm gonna do the same. I put on 1.5" hubcentric spacers from KSP. Would you recommend removing the factor mud flaps first? I'm thinking they may not rub if you took them off.
Thanks for review, looks great! I’m considering these on my TB but keeping stock height. I’m a highway driver, no off roading. That said would you go with same size or 295/60/20 (33.94 x 11.77)? Appreciate your thoughts.
I’m looking to go with 33x12.5 tires on my trailboss with the upgraded control arms and a level kit but the rims I’m looking at are 1mm offset compared to the stock wheels which are 28mm. Has anyone run anything similar and know if I’m going to have any fitment issues?
How good do you feel about them I just bought mine 2 weeks ago for my 21 ram 1500 and I don’t like them at all I feel the thread on the road and I have steering wheel vibration after 50 mph They’ve been balanced twice already in two weeks and still get the vibration
It is called Oxford Brown Metallic. Super nice color. I love it. It looks like copper when the sun hits it. In the late evening it looks dark gray or when it is overcast skies it looks almost black. Beautiful color.
Trying to do the same exact thing to my truck. Looking forward to your next video! I can’t believe there are not more videos like this.
Thanks bro. The wheel spacers just came today. That was way faster than expected. Custom Offsets told me to expect 3 weeks. Only took like 5 days. I’m headed off on a vacation but when I get back in a few days I’ll put it on and do another video
@@bamaknifeguy question can you install 1.50 leveling kit with out the upper control arm ?
I know I’m late, but that truck is beautiful 🤌🏼
I used 1.5 inch G2 wheel spacers with a 2.25 inch level kit to run 33x12.50 Stock 20's on a 2019 LTZ Z71. I had to do some serious trimming on that mud flap and took off the bracket that is set behind the mud flap. No rubbing at all. You should be fine after your SST Lift on there.
Thanks bro. I put the lift on and the 1/2” Bora spacers. Everything is good to go. 35x11.50 Recon Graps on stock 20”s. Lookin good. Thanks 🤘🏼
Wooiohoooo keeps coming brotha
She’s coming together. 🤙🏼
You nailed it buddy
Thanks man. Appreciate it. Since then, I installed the lift and the 1/2” front hub centric spacers and everything is holding beautifully. It’s been about a year and the Recon Grapplers are wearing great and everything else seems fine too.
Thanks 🙏🏼
1/4 inch wheel spacers for AutoZone I did quarter inch wheel spacers from AutoZone and had no problem with 35-in nano recon grasses 351150 20 on a high country and with a 3 1/2 inch leveling kit from rough country with a quarter inch spacer and still have plenty of lug nuts and never came loose I check in periodically for the last since 2021 or 2024 never had a problem I know what you're saying about not sitting on it which is sure why try to get you can't find a hub-centric wheel spacers only fit aftermarket rims not stock rims so make sure you check that out so you don't have to go through that as well cuz
Thanks for the advice bro. I found out that Bora makes hub centric wheel spacers for stock wheels that fit beautifully. They are carried by CustomOffsets.com. Great people over there. Also, the reason I had to run the wheel spacers is because of the Aftermarket Upper Control Arms that I am running. They are the replacements that I installed with my Ready Lift lift kit. The upper ball joint is a bit larger which caused a little bit of clearance issue between the upper ball joint and the inner sidewall of the tires on the front. Not too big of a problem to overcome but did require the spacers for more clearance. I love all of the modifications that I have done so far. Lift, tires, control arms, spacers and exhaust. All of them have worked perfectly. Thanks for the comment.
Nice Brother, Lee🔥💕🙌🏼!!
Thanks buddy.
Looks good!
Thanks bro
I wonder if you do the mud flap delete if it would work. The part you pointed to where it was rubbing looked like the mud flap
I’m putting the Ready Lift 1.75” level on the front and going with 1.5” spacers and nitto recon grapplers 285/75 18
Hell yea man. Sounds good. That’s a sweet setup.
How did you end up liking the Recons? Im stuck between them and the Toyo AT3'S. Mileage is a big deal
Looks good. i think I'm gonna do the same. I put on 1.5" hubcentric spacers from KSP. Would you recommend removing the factor mud flaps first? I'm thinking they may not rub if you took them off.
Yea I think you’re right
I know I’m late but I had a question about the gas mileage. Have you seen a big difference in average mpg or is it still decent.
Thanks for review, looks great! I’m considering these on my TB but keeping stock height. I’m a highway driver, no off roading. That said would you go with same size or 295/60/20 (33.94 x 11.77)? Appreciate your thoughts.
If you keep stock size it’ll make for better fuel economy but I like the look of a bigger tire
Then why the fuck did you buy a trail boss….? Go buy a mini van….
How do you like them now
I’m looking to go with 33x12.5 tires on my trailboss with the upgraded control arms and a level kit but the rims I’m looking at are 1mm offset compared to the stock wheels which are 28mm. Has anyone run anything similar and know if I’m going to have any fitment issues?
How good do you feel about them I just bought mine 2 weeks ago for my 21 ram 1500 and I don’t like them at all I feel the thread on the road and I have steering wheel vibration after 50 mph They’ve been balanced twice already in two weeks and still get the vibration
I’ve had no problem with mine balancing or staying that way. Mine are great.
I'm thinking of something similar maybe level as well, how tall is the truck at the highest point now after the tires?
You mean like the highest point of the roof ? I haven’t measured yet but I can if it’ll help you
@@bamaknifeguy Ya, trying to figure out how tall it'll be and if I can clear under my garage door. Thanks!
@@ooVIDAR Word. I gotcha. I’ll go measure it now. It’s outside my office.
@@ooVIDAR You on Instagram? I can message you there. My IG name is the same as it is here. BamaKnifeGuy
@@bamaknifeguy Just made one I'll hit you up, thanks.
What colour is this?
It is called Oxford Brown Metallic. Super nice color. I love it. It looks like copper when the sun hits it. In the late evening it looks dark gray or when it is overcast skies it looks almost black. Beautiful color.
Will a Chevy pull a 35?
😆😆
2" spacers
Running a Rough Country hub-centric wheel spacers on my 2020 trail boss. Leveling kit installed, Have 35’ Nitto Ridge Grapplers on them and love them!
@@matthewcriner8062 what is the size tire? 285/70? Stock wheels?
295/70/18 comes it to about a 34.8 inch.
I had to do a minor trim on the splash guards but it was minor. Other wise fits with minor trimming.
Gerry baker it is stock wheels