The hole shot, torque and mid range acceleration on my 150 Optimax was just awesome. That thing just growled. Never had any trouble with it. But yeah, that thing was LOUD!!!! It got to the point that I wore ear plugs when running. Miss it though.
Had the same problem with bass pro. I changed to a local dealer. Now satisfied. Wish I had bought from them . Got a deal on a 2019 in January 2020 couldn’t pass up on $4,000 off and the boat was exactly the color I wanted. Agree with you on the trailer. My 1996 Astro had a lot better trailer than Nitro. Wish the new boats had a little more weight to them. My old Astro and my uncles old pro craft took rough waters better. I still like my Nitro. Good luck fishing .
hey love the boat just ordered the 2021 z18. took ur word on the 175hp pro sx. not sure if they had it in 2018 but the storage drawer ur looking for is called the under deck storage drawer . its in frt of the passenger side where the feet are resting. i ordered that as well cause i didnt want the second console. tight lines cant wait..
You’re gonna love it man! I’ve been eyeballing that storage compartment. They quoted me several hundred for it and I just haven’t bit the bullet on it yet. You won’t be sorry with the 175, congrats!
Something you might try with your two lowrance ti . Hook both to the down scan side scan. Then use left side scan on one unit and right side scan on the other. It makes it a little easier to see i have heard.
I have a z7 2014. Same boat just older. My mercury 175hp has had 3 oil res tanks on it. My experience if it’s not transferring oil make sure all lids on storage tank is tight tight. Also it could be the check valve letting it back flow. It’s brass on the oil line going into your small res. Oil filter small white clear inline filter before the brass check valve. My boat has been beat up for 7 years and it shows no cracks like everyone says. The boat runs 65-67 normal depending on load. No boat issues only motor
I was re-watching your vid again and the seat issue from what I heard is common on some of them, but what might help preserve that is use a leather conditioner for cars and that stuff. Might help it last a bit longer a stay in decent shape.
The oil tank issue is due to air in the system or a faulty sensor . You can fix yourself by urging the air from the system. . The sensor o's a tank replacement that is 3 or 4 bolts . Have them send you the tank put on and purge air . That's probably the cause of your issue
I suspected this for sure, they told me they already swapped the tank once...I don't believe them though since they told me during the same service that they re-carpeted my trailer bunks and it was obvious, they DID not. I cant believe a word they say now.
Nice vid! I would love to get a nice little upgrade from my 99 Tracker with a 50. I want a Nitro bc of their quality. On my first ride in a Z18 I was like what the heck this is pure luxury. I probably want a z17 or a z18. Both great. Nice vid man
My last boat was a 1986 bass tracker I had for 12 years. Almost upgraded with a 195TXW but when it came down to signing on the line I went with what I thought was a better built boat. As you mentioned, my first test drive was luxurious 🤩
Great video. I have a 2022 Z18 pro, quick question, do you have the PVS plugs in your prop? im having problems getting on plane, i have a hydraulic jackplate
I do not, mine did isn’t come with any 25p fury I believe, maybe 24… I never bothered to check nor did I really know about them at the time, my previous boat wasn’t that fancy haha. I get up on plane like a beast though, almost instant. Manual jack plate about 3.5” prop to pad.
Pretty solid for its size. Certainly not the comfort of a 21 footer though. Of course, speed and navigation abilities play a big part in your comfort level but I’ve have it out in some sketchy Okeechobee weather before and she’s up for the challenge any day, It can get rough but safety never a concern.
I run an aluminum Vexus. I’d describe it much the same. Get blown around easily though. And there’s no question. As good as it is for aluminum. Glass is just more comfortable absorbing impacts
I am not amazed about the customer service falling off big time. This is the first time I have ever been disappointed with bass pro shop. My issue isn’t a boat but an OX 400 19 months of ownership and it sit in repair for 9 of those months. Still not fixed. No answers to phone call from anyone from the store, to corporate. It’s really aggravating! Headed to BPS Springfield tomorrow on a drop in visit at corporate. Good luck with your mercury.
I feel your pain. I will say, it looks like they cleaned house at my store and from my last conversation it sounded a little more promising that they’ll be getting their act together. Fingers crossed, good luck.
Thanks for the review - looks like an awesome boat. I have an Ranger RT188 and thinking about upgrading to a glass boat. How do you feel about the double latches on the center compartment? Seems like a pain to open and close. I love the center rod locker on my Ranger and I’m afraid of missing it!
The RT188 is a nice boat, I came from a tin tracker so I leaning towards an RT188 at one point. I go out with my kids a bunch and wanted as much floor space as possible for an 18 foot class boat. The RT seemed a little tight for me so it got eliminated. The dual latches do not bother me one bit. Everytime I open it it’s pretty much with two hands turning and pulling in unison. It’s not something you wouldn’t get used to in a hurry. The only other boat I still consider wanting is a Vexus 1989CC. I love in FL so naturally, it would make a good dual purpose boat. The lack of a recessed trolling motor foot pedal is probably why I don’t own one now. Love my my nitro tho.
@@FillALimitFishing Yeah you’re probably right about getting used to the center console quickly. It does look like Nitro gives you the most for your money when considering the major brands of 18ft fiberglass bass boat
I just got my Z20 pro, I got it from a local dealer who we have known for a long time, 2 questions does the boat have any problems with water going in the compartments and does the hull scratch easy?
My compartments stay bone dry actually which I’m very impressed with. I did have water in them one time driving through a absolute down pour here in FL but it wasn’t much. Not too impressed with the hull situation, but my hull is black and from what I understand a very common problem to scratch up by the trailer bunks. The rest of the hull is spotless after 2.5 years but where it slides up in the trailer bunk, no bueno, had it buffed out once and it was back 2 or 3 trips later. I live with it, not a huge deal.
One year after warranty fuel gauge went out as well as the Speed ometer and I had a bitch about putting oil in the reservoir should have came with a outside oil cap(fill) but over all I have the 175 runs great lot of room
I haven’t committed yet, but I may be there myself on Sunday. May go to poga, or back to the big O. If I go to placid I will be doing a lot of scanning looking for a group of pre spawners offshore around the southeastern and norther parts of the lake. If that fails I would peck around shallow and hit some docks along the way.
Masked Deplorable Do they have their 2021 season schedule available? My free weekends are so inconsistent with my wife’s night shift and my kids, makes tourney fishing tough. Typically Sunday’s my day.
15” per manufacturer. I’ve been up shallow but I don’t believe I’ve had mine in a foot of water to confirm or deny that…you may want to consider an aluminum rig or a flats boat if your getting super skinny?
I really appreciate the in depth review man! I keep looking at this boat, and the tracker 190tx, and also the ranger rt188. I’ve owned a tracker 175 in the past. Need something with a bit more motor. The nitro is the only fiberglass boat I’m really looking at. Do you have any opinions on the major differences that I would notice by going with either of those boats instead of the z18? The z18 is probably the sexiest. Also trying to keep price in mind. Thanks in advance for any help.
I came from an old Tracker Tx-17, Ever since the 195TXW came out I always thought I was going to own one, the boat is huge, takes the 150, and love the way it looks in white. I sat it in at my local BPS over the course of many weekends, it was always right next to this beautiful white Z18 I always eyeballed...when the day came I decided on the Z18. It felt like a better built boat and a better investment in my opinion. I’m sure I would have been just as happy with the 195. The 190 is a nice rig, I considered it for financial reasons, but it is a much narrower boat, i fort cramped in it. The nitro is very spacious. I felt the same way in a rt188, also another nice boat. I do miss owning a tin boat for a multitude of reasons but there’s no denying the nitros performs like a Cadillac. Love it, no REGERTZ! Whatever you can afford and works for you man, go for it and don’t think twice, you’ll love whatever you choose, don’t let anyone tell you otherwise.
@@FillALimitFishing dude, appreciate you replying so fast. I’ve been looking at the 195 as well, noticed it was considerably wider. I definitely think I’m leaning z18. Especially after your vids! Subscribed to your channel man. Keep up the good work! Thanks again.
Actually was just thinking about doing a comprehensive 5 year review. Stay tuned. The boat has been flawless other than minor cosmetic issues. Replaced trailer bunks once but overall trailer has performed as it should, no major issues. Don’t believe all the negative comments you may hear. It’s an awesome rig and I have NO regrets. If anything wish I had more wallet so I could get a bigger one ☝️
@FillALimitFishing I hear ya. I been looking to buy a new boat, and I have been looking at the z18. I do tournament fish, so having a big enough livewell for myself and a co angler is a must. Do you think the livewell is big enough for 2 limits. I live in Florida as well, so I know these limits can be around 25-30 sometimes. I'm sure 30 gallons is enough, but I wanted someone's opinion. Thanks again.
@@JesseMcMillanFishing I’m in FL too. I weighted in 29 1/2 pounds last month on the Caloosahatchee River, all 5 alive. I did use both wells though, had 2 in one and 3 in the other. 20 pounds in each side no problem. 30 pounds in one side would be a little tight I think from experience but I’ve never tried.
@FillALimitFishing yea, well that helps a little. I think even if you had 28-30 in one side for 1-2hrs I would assume they would be okay. All day from 7am idk.. but than again, if my co angler only had 1 or 2 small fish I could always throw my biggest on there side.. I look forward to watching your new review if you do one. Thanks alot.
The Z18 is more than capable. I love my rig and can hang with the highest competition in the water with no worries. Being said, get the biggest boat your garage/wallet can handle. Speed is not an issue, but in a rough chop you won’t be sorry for having a bigger rig. I been though some nasty stuff and safety is never really a question but it will cut your tail when it’s really nasty out, then again, maybe all bass boats do. I’ve never been in rough waters in anything bigger so I can’t attest, I can only base that opinion for comments of others. No regertZ, love my Z18!
Hey couple quick comments and questions for you. I have a 2019 z18 150 proxs 4stroke. Sandwich tray is the deal for sure. Keys wallet go pro perfect for that. I also have the seat issue. Sucks bad. I have a 80# Fortrex trolling motor. Simple, strong, and reliable. Ultrex, ghost, and force have alot of electronics in them. They seem to have problems. Have 2 buddies with ultrex and both having hard time with them. They are awesome when working though. Did you do your graph installs? If so how hard was it installing the front graphs. Also what kind of speed are you getting out of z18. Overall Ive been throughly impressed with my boat. Ive had mine about 18 months. Great video and I will be checking out more. Thanks!
Hey, thanks for the trolling motor tip…I’m still rocking the dang maxxum, actually have repaired it twice myself already hah, it’s gotta go soon. I did install all the graphs myself with BAss Boat Technologies mounts. I think I have a mediocre video of me fighting the one at the console actually… that one was a little rough cause I was alone in a HOT FL garage, an extra set of hands would go a long way, same can be said for the keel guard but that’s another story! If your anywhere electrically inclined you should be okay, it’s not that difficult. I’m anal so making sure the graphs were centered and level were the hardest parts, after that all was good. The front graphs were easier for sure, good fish tape makes light work. I seem to top out in the low 60s, I typically keep her around 50 though so it’s plenty for me. Let me know if you have any specific questions, happy to help!
@@FillALimitFishing Thanks for the reply. I'm fixing to I install a carbon 9 at the console. And move the existing carbon 7 to the bow. I'm hoping the console one will not be much trouble being as how I already have one there. The front one I'm more worried about. I'm pretty electrically inclined. And hoping to have some extra hands. I'll let you know how it turns out. I top out in the upper 50s (58-59). I also have 12' talons. Which I feel like takes away a couple of mph's. Thanks against for the reply.
No, I have to lower them each time to pull in/out. Not a big deal honestly, unless you are the type of person who habitually forgets their drainplug, haha. Accidents can and will happen...The top of the poles are 7'-2" from the ground on my boat. Yes by door is a standard 7 footer.
@@FillALimitFishing lol I would be more concerned with the “pulling out of the garage at 3:00 AM thing and forgetting to lower them. Thanks for the reply.
Do you know if It is available on the 2018? I sure as hell would like one. I can’t ask my dealer because they are awful, BPS of course. I tried to get in touch with another dealer a little farther from me the other day and haven’t got a call back from them either, really struggling with customer service right now.
Just moved here from the Carolinas planning on hitting it Tuesday or Wednesday went last week nothing just trying to learn how to fisharound here getting tough tried to Cape Coral canals did okay not too many big ones
Masked Deplorable I moved from SC little over 3 years ago. Fishing can be fickle. I don’t go to the cape much anymore, I couldn’t connect with anything over a pound but I know some guys do catch seven to fish there. I fish Okeechobee a few times before a FLW college event years ago, haven’t been on it as much as I should probably since I’ve moved here though, navigating the big O has always been a concern for me but maybe I’m overthinking it. Scared to fudge up my boat haha! If I’m not fishing the caloosahatchee I’m in Sebring fishing those lakes.
@@FillALimitFishing haven't bee. To river get was scary at the big O but ganna learn it they said they hitting so ganna go don't wish to mess up my ranger either but got to give it a shot
Masked Deplorable I feel the same way, it’s too good of a fishery to avoid it. I’ll be launching from Harney pond when I do go, I’ll just take it easy, find an area and fish it thoroughly to get my feet to wet again. Water is high so it’s should be pretty safe now. I went a year or two aho during the dry season and got stuck 2 times. It wasn’t fun, been avoiding it since then haha.
😂 i putted around in a 1986 Tracker for over 12 years before this one so I definitely know what an old boat is, thing was practically held together by 3M 5200 😜
Haha yeah, I know it’s bad. When I watched it first time I said what the hell, sound like a high school teen with the word LIKE. Something to work on 😂. You won’t regret it, awesome fishing package.
@@FillALimitFishing Thank the good lord above that I'm not from Florida. I have been fishing shallow for almost 50 years and can do with a trolling motor what the same things y'all can do with those goofy things hanging off the back of your boat.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
The hole shot, torque and mid range acceleration on my 150 Optimax was just awesome. That thing just growled. Never had any trouble with it. But yeah, that thing was LOUD!!!! It got to the point that I wore ear plugs when running. Miss it though.
Had the same problem with bass pro. I changed to a local dealer. Now satisfied. Wish I had bought from them . Got a deal on a 2019 in January 2020 couldn’t pass up on $4,000 off and the boat was exactly the color I wanted. Agree with you on the trailer. My 1996 Astro had a lot better trailer than Nitro. Wish the new boats had a little more weight to them. My old Astro and my uncles old pro craft took rough waters better. I still like my Nitro.
Good luck fishing .
hey love the boat just ordered the 2021 z18. took ur word on the 175hp pro sx. not sure if they had it in 2018 but the storage drawer ur looking for is called the under deck storage drawer . its in frt of the passenger side where the feet are resting. i ordered that as well cause i didnt want the second console. tight lines cant wait..
You’re gonna love it man! I’ve been eyeballing that storage compartment. They quoted me several hundred for it and I just haven’t bit the bullet on it yet. You won’t be sorry with the 175, congrats!
Nice review and video. Keeping it real counts!
Something you might try with your two lowrance ti . Hook both to the down scan side scan. Then use left side scan on one unit and right side scan on the other. It makes it a little easier to see i have heard.
I don’t believe these is a feature of the Elite Ti’s. I think the Ti2’s can share mappping and 2D via wireless but that’s it.
I have the same issues with BP as well, as far as the boat goes I love my Z18. I went with spot lock most lakes I fish are to deep for poles.
I have a z7 2014. Same boat just older. My mercury 175hp has had 3 oil res tanks on it. My experience if it’s not transferring oil make sure all lids on storage tank is tight tight. Also it could be the check valve letting it back flow. It’s brass on the oil line going into your small res. Oil filter small white clear inline filter before the brass check valve. My boat has been beat up for 7 years and it shows no cracks like everyone says. The boat runs 65-67 normal depending on load. No boat issues only motor
My big oil reservoir has a crack in the install tube…problem took forever to find but once fix runs like it should, love my boat even the merc now 😀
I was re-watching your vid again and the seat issue from what I heard is common on some of them, but what might help preserve that is use a leather conditioner for cars and that stuff. Might help it last a bit longer a stay in decent shape.
The oil tank issue is due to air in the system or a faulty sensor . You can fix yourself by urging the air from the system. . The sensor o's a tank replacement that is 3 or 4 bolts . Have them send you the tank put on and purge air . That's probably the cause of your issue
I suspected this for sure, they told me they already swapped the tank once...I don't believe them though since they told me during the same service that they re-carpeted my trailer bunks and it was obvious, they DID not. I cant believe a word they say now.
Nice vid! I would love to get a nice little upgrade from my 99 Tracker with a 50. I want a Nitro bc of their quality. On my first ride in a Z18 I was like what the heck this is pure luxury. I probably want a z17 or a z18. Both great. Nice vid man
My last boat was a 1986 bass tracker I had for 12 years. Almost upgraded with a 195TXW but when it came down to signing on the line I went with what I thought was a better built boat. As you mentioned, my first test drive was luxurious 🤩
I was just in awe by how quick they were
Great video. I have a 2022 Z18 pro, quick question, do you have the PVS plugs in your prop? im having problems getting on plane, i have a hydraulic jackplate
I do not, mine did isn’t come with any 25p fury I believe, maybe 24… I never bothered to check nor did I really know about them at the time, my previous boat wasn’t that fancy haha. I get up on plane like a beast though, almost instant. Manual jack plate about 3.5” prop to pad.
How’s it handle big water / waves? I fish lake Champlain mainly. Which gets hideous much of the time
Pretty solid for its size. Certainly not the comfort of a 21 footer though. Of course, speed and navigation abilities play a big part in your comfort level but I’ve have it out in some sketchy Okeechobee weather before and she’s up for the challenge any day, It can get rough but safety never a concern.
I run an aluminum Vexus. I’d describe it much the same. Get blown around easily though. And there’s no question. As good as it is for aluminum. Glass is just more comfortable absorbing impacts
I am not amazed about the customer service falling off big time. This is the first time I have ever been disappointed with bass pro shop. My issue isn’t a boat but an OX 400 19 months of ownership and it sit in repair for 9 of those months. Still not fixed. No answers to phone call from anyone from the store, to corporate. It’s really aggravating! Headed to BPS Springfield tomorrow on a drop in visit at corporate. Good luck with your mercury.
I feel your pain. I will say, it looks like they cleaned house at my store and from my last conversation it sounded a little more promising that they’ll be getting their act together. Fingers crossed, good luck.
Thanks for the review - looks like an awesome boat. I have an Ranger RT188 and thinking about upgrading to a glass boat. How do you feel about the double latches on the center compartment? Seems like a pain to open and close. I love the center rod locker on my Ranger and I’m afraid of missing it!
The RT188 is a nice boat, I came from a tin tracker so I leaning towards an RT188 at one point. I go out with my kids a bunch and wanted as much floor space as possible for an 18 foot class boat. The RT seemed a little tight for me so it got eliminated. The dual latches do not bother me one bit. Everytime I open it it’s pretty much with two hands turning and pulling in unison. It’s not something you wouldn’t get used to in a hurry. The only other boat I still consider wanting is a Vexus 1989CC. I love in FL so naturally, it would make a good dual purpose boat. The lack of a recessed trolling motor foot pedal is probably why I don’t own one now. Love my my nitro tho.
@@FillALimitFishing Yeah you’re probably right about getting used to the center console quickly. It does look like Nitro gives you the most for your money when considering the major brands of 18ft fiberglass bass boat
I just got my Z20 pro, I got it from a local dealer who we have known for a long time, 2 questions does the boat have any problems with water going in the compartments and does the hull scratch easy?
My compartments stay bone dry actually which I’m very impressed with. I did have water in them one time driving through a absolute down pour here in FL but it wasn’t much. Not too impressed with the hull situation, but my hull is black and from what I understand a very common problem to scratch up by the trailer bunks. The rest of the hull is spotless after 2.5 years but where it slides up in the trailer bunk, no bueno, had it buffed out once and it was back 2 or 3 trips later. I live with it, not a huge deal.
@@FillALimitFishing it would be great if u made a YT short about the hull issue it would help me and a lot of people out!
One year after warranty fuel gauge went out as well as the Speed ometer and I had a bitch about putting oil in the reservoir should have came with a outside oil cap(fill) but over all I have the 175 runs great lot of room
Fishing lake placid this weekend any ideas first time ever. Thanks.
I haven’t committed yet, but I may be there myself on Sunday. May go to poga, or back to the big O. If I go to placid I will be doing a lot of scanning looking for a group of pre spawners offshore around the southeastern and norther parts of the lake. If that fails I would peck around shallow and hit some docks along the way.
@@FillALimitFishing ganna try it will let you know how it goes also fishing lake june punishing myself lol
Are you fishing with the Cape Coral Bass Club? I noticed they are fishing both of those on Saturday and Sunday. I need to join.
@@FillALimitFishing yes signed up last night
Masked Deplorable
Do they have their 2021 season schedule available? My free weekends are so inconsistent with my wife’s night shift and my kids, makes tourney fishing tough. Typically Sunday’s my day.
Hey bro what’s your draft ? Considering this boat but I gotta be able to troll around in a foot or less.
15” per manufacturer. I’ve been up shallow but I don’t believe I’ve had mine in a foot of water to confirm or deny that…you may want to consider an aluminum rig or a flats boat if your getting super skinny?
I really appreciate the in depth review man! I keep looking at this boat, and the tracker 190tx, and also the ranger rt188. I’ve owned a tracker 175 in the past. Need something with a bit more motor. The nitro is the only fiberglass boat I’m really looking at. Do you have any opinions on the major differences that I would notice by going with either of those boats instead of the z18?
The z18 is probably the sexiest. Also trying to keep price in mind. Thanks in advance for any help.
I came from an old Tracker Tx-17, Ever since the 195TXW came out I always thought I was going to own one, the boat is huge, takes the 150, and love the way it looks in white. I sat it in at my local BPS over the course of many weekends, it was always right next to this beautiful white Z18 I always eyeballed...when the day came I decided on the Z18. It felt like a better built boat and a better investment in my opinion. I’m sure I would have been just as happy with the 195. The 190 is a nice rig, I considered it for financial reasons, but it is a much narrower boat, i fort cramped in it. The nitro is very spacious. I felt the same way in a rt188, also another nice boat. I do miss owning a tin boat for a multitude of reasons but there’s no denying the nitros performs like a Cadillac. Love it, no REGERTZ! Whatever you can afford and works for you man, go for it and don’t think twice, you’ll love whatever you choose, don’t let anyone tell you otherwise.
@@FillALimitFishing dude, appreciate you replying so fast. I’ve been looking at the 195 as well, noticed it was considerably wider. I definitely think I’m leaning z18. Especially after your vids! Subscribed to your channel man. Keep up the good work!
Thanks again.
Appreciate it, if you have any more detailed questions as you get closer, let me know!
With it being 2024 what's your opinion on the boat and trailer. Love the review. Thanks,
Actually was just thinking about doing a comprehensive 5 year review. Stay tuned. The boat has been flawless other than minor cosmetic issues. Replaced trailer bunks once but overall trailer has performed as it should, no major issues. Don’t believe all the negative comments you may hear. It’s an awesome rig and I have NO regrets. If anything wish I had more wallet so I could get a bigger one ☝️
@FillALimitFishing I hear ya. I been looking to buy a new boat, and I have been looking at the z18. I do tournament fish, so having a big enough livewell for myself and a co angler is a must. Do you think the livewell is big enough for 2 limits. I live in Florida as well, so I know these limits can be around 25-30 sometimes. I'm sure 30 gallons is enough, but I wanted someone's opinion. Thanks again.
@@JesseMcMillanFishing I’m in FL too. I weighted in 29 1/2 pounds last month on the Caloosahatchee River, all 5 alive. I did use both wells though, had 2 in one and 3 in the other. 20 pounds in each side no problem. 30 pounds in one side would be a little tight I think from experience but I’ve never tried.
@FillALimitFishing yea, well that helps a little. I think even if you had 28-30 in one side for 1-2hrs I would assume they would be okay. All day from 7am idk.. but than again, if my co angler only had 1 or 2 small fish I could always throw my biggest on there side.. I look forward to watching your new review if you do one. Thanks alot.
Looking to start fishing some BFL's and maybe some Toyota Series, do you think the Z18 Pro is a good fit for that level?
The Z18 is more than capable. I love my rig and can hang with the highest competition in the water with no worries. Being said, get the biggest boat your garage/wallet can handle. Speed is not an issue, but in a rough chop you won’t be sorry for having a bigger rig. I been though some nasty stuff and safety is never really a question but it will cut your tail when it’s really nasty out, then again, maybe all bass boats do. I’ve never been in rough waters in anything bigger so I can’t attest, I can only base that opinion for comments of others. No regertZ, love my Z18!
Bass Pro is kinda the Autozone of the fishing industry.
Hey couple quick comments and questions for you. I have a 2019 z18 150 proxs 4stroke. Sandwich tray is the deal for sure. Keys wallet go pro perfect for that. I also have the seat issue. Sucks bad. I have a 80# Fortrex trolling motor. Simple, strong, and reliable. Ultrex, ghost, and force have alot of electronics in them. They seem to have problems. Have 2 buddies with ultrex and both having hard time with them. They are awesome when working though. Did you do your graph installs? If so how hard was it installing the front graphs. Also what kind of speed are you getting out of z18. Overall Ive been throughly impressed with my boat. Ive had mine about 18 months. Great video and I will be checking out more. Thanks!
Hey, thanks for the trolling motor tip…I’m still rocking the dang maxxum, actually have repaired it twice myself already hah, it’s gotta go soon. I did install all the graphs myself with BAss Boat Technologies mounts. I think I have a mediocre video of me fighting the one at the console actually… that one was a little rough cause I was alone in a HOT FL garage, an extra set of hands would go a long way, same can be said for the keel guard but that’s another story! If your anywhere electrically inclined you should be okay, it’s not that difficult. I’m anal so making sure the graphs were centered and level were the hardest parts, after that all was good. The front graphs were easier for sure, good fish tape makes light work. I seem to top out in the low 60s, I typically keep her around 50 though so it’s plenty for me. Let me know if you have any specific questions, happy to help!
@@FillALimitFishing Thanks for the reply. I'm fixing to I install a carbon 9 at the console. And move the existing carbon 7 to the bow. I'm hoping the console one will not be much trouble being as how I already have one there. The front one I'm more worried about. I'm pretty electrically inclined. And hoping to have some extra hands. I'll let you know how it turns out. I top out in the upper 50s (58-59). I also have 12' talons. Which I feel like takes away a couple of mph's. Thanks against for the reply.
Where can you find the VIN on the Nitro
Mines engraved onto a small metal tag on the transom, starboard side.
Does the boat fit in your garage without lowering your power poles? Is it a standard 7 foot garage door?
No, I have to lower them each time to pull in/out. Not a big deal honestly, unless you are the type of person who habitually forgets their drainplug, haha. Accidents can and will happen...The top of the poles are 7'-2" from the ground on my boat. Yes by door is a standard 7 footer.
@@FillALimitFishing lol I would be more concerned with the “pulling out of the garage at 3:00 AM thing and forgetting to lower them. Thanks for the reply.
I would get an ultrex 80# 45'" over the ghost unless you are going to upgrade to live or FS units in the future.
Go back and get the snap in sandwich tray for the cooler.
Do you know if It is available on the 2018? I sure as hell would like one. I can’t ask my dealer because they are awful, BPS of course. I tried to get in touch with another dealer a little farther from me the other day and haven’t got a call back from them either, really struggling with customer service right now.
I do not really plan on FS or live in the near future at least. I’ll prob end up with the ultrex and save some cash. Thanks!
The tray is available, I will get the pet number for you when I go back to work on Tuesday
Awesome, thanks!
How fast does it run with that setup?
60 all day tournament load, 64 and she starts walking on me. She scoots!
Have you been on oakachobee lately.
No! It’s been a while...I plan on going in the next week or two though, fingers crossed.
Just moved here from the Carolinas planning on hitting it Tuesday or Wednesday went last week nothing just trying to learn how to fisharound here getting tough tried to Cape Coral canals did okay not too many big ones
Masked Deplorable
I moved from SC little over 3 years ago. Fishing can be fickle. I don’t go to the cape much anymore, I couldn’t connect with anything over a pound but I know some guys do catch seven to fish there. I fish Okeechobee a few times before a FLW college event years ago, haven’t been on it as much as I should probably since I’ve moved here though, navigating the big O has always been a concern for me but maybe I’m overthinking it. Scared to fudge up my boat haha! If I’m not fishing the caloosahatchee I’m in Sebring fishing those lakes.
@@FillALimitFishing haven't bee. To river get was scary at the big O but ganna learn it they said they hitting so ganna go don't wish to mess up my ranger either but got to give it a shot
Masked Deplorable
I feel the same way, it’s too good of a fishery to avoid it. I’ll be launching from Harney pond when I do go, I’ll just take it easy, find an area and fish it thoroughly to get my feet to wet again. Water is high so it’s should be pretty safe now. I went a year or two aho during the dry season and got stuck 2 times. It wasn’t fun, been avoiding it since then haha.
Nice video.
Got a 1987 Stratos with a 150 that’s all I could afford working mans boat and I guarantee you it’ll do just as good
I owned a 1986 tracker for 12+ years. It was a great little boat, really all one needs. Whatever it takes to get on the water, all that matters!
“Older boat”… as I putt around in my 2002 lmao
😂 i putted around in a 1986 Tracker for over 12 years before this one so I definitely know what an old boat is, thing was practically held together by 3M 5200 😜
I love this boat... lol except everything about it
To each their own, i believe it’s a fine vessel.
Get the hot foot you will never go back I have the same boat with a 150 proxs 4 stroke.
I know I know! I will eventually add it.
I disagree. I have a hotfoot and rarely use it.
Say "man" just one more time.....
Just messing with you. Thanks for an honest review. I'm looking to order one soon.
Haha yeah, I know it’s bad. When I watched it first time I said what the hell, sound like a high school teen with the word LIKE. Something to work on 😂. You won’t regret it, awesome fishing package.
Let them keep talking crap on Nitro. Keeps the price down so a normal guy can afford to get into a glass boat.
Amen, I love my boat!
Power poles are the biggest waist of money and space ever invented.
You obviously are not from Florida or do any sort of effective shallow water fishing. Sorry you feel that way.
@@FillALimitFishing Thank the good lord above that I'm not from Florida. I have been fishing shallow for almost 50 years and can do with a trolling motor what the same things y'all can do with those goofy things hanging off the back of your boat.
my favorite is when someone makes a rude, pompous comment but doesn't even know how to spell.
@@ccalxr Seems yo gut yer fill-ins hert
You have no idea what you’re talking about. I wouldn’t own a boat without raptors/power poles