This was a great video really gets the idea across what you need to do in order to make one. Was trying to explain what needs to be done with words only to a person and they didn't get it. Amazing video
Hi The video is really helpful. I am working with 150 kg loadcell, but I am not getting proper output. The values I get keep increasing irrespect of weight i put. can you pls help.
Great job, but it is not advised to weld with the load cell in place. Welding current will damage a load cell. If necessary remove the load cell prior to welding. If you absolutely cannot remove the load cell, ensure you ground the welder as close as possible to the position where you are applying the weld, and not through the load cell
I need it until tomorrow bro I have my final year project tomorrow and I am facing some problems with the code I have it's not giving correct weight measurement and value for calibration factor of known weight is also showing variation
but i think if the platform length and wide chosen bigger then capability of the sensor ,it's may cause damage to sensor by applying load at corner of platform.
@@MakerMan i need to know one thing.... Is there is any chance for breaking load cell...( If we putting small load cell) and are you getting precise value
That was awesome, however I felt like I was watching some 80s television show like Miami Vice and you were rushing to finish it before the drug cartel bust into your room and stole your project. So when is the mini series coming out.
bro every thing is good including ur concept but i am gonna use it for my shop so i need a tare button ...can u please provide tare button connection and its code please
@@MakerMan can i use this code in arduino uno r3??? coz i have that module...and u used in the video was another.?? if not then can u give me codes for uni r3 pls??
MakerMan it's just that i have a load cell of 100kg and its excitation voltage is between 9v to 12v so i just wanna know if its gonna be a problem with the amplifier hx711 and arduino to give the right supply to the load cell ?
MakerMan that's why i tought becaise hx711 send a supplu btw 2.6v and 5.5v so its better to have a load cell with exctitation voltage of 5V to 10V its gonna work right?
Sir weighing Machine Ko Control Krny TareeQa Detail Se Btaa Den. It's Mean Jo Aap Ne (Screen+Module+Chipp) ETC Use Ki Hai Us Ke Connections Detail Se Bta Deen PleaSe
@@MakerMan Thanks I try what you did but the load cell is 150 kg I get from a bathroom scale and the Arduino is Uno when I run it the kg is shown but not the exact value I try calibrate with 1 kg then 5 kg still not shown exact result then I try to change the calibrate factor which is this " scale1.set_scale(-11410);" but I can't do It by this what shall I do? so much thanks am waiting your answer thank you
Bro you are expert in real field work...you have a clean hands
Your background music made me think that you making a time machine...
+joker3053 hehe
more like a bomb
Hahah
🤣🤣😎
Nice joke
This was a great video really gets the idea across what you need to do in order to make one.
Was trying to explain what needs to be done with words only to a person and they didn't get it.
Amazing video
Whats the name of that instrument for cutting the junction box for place the lcd ,,....
hello bro. your code link is error. can you fix your link please? thanks
Who else watches these videos but dosent do it
me here....I ain't capable of making big things...and doesn't wish to do the small and simple one
Have you ever heard of anybody actually doing the damn project tho? As long as wasent like one of those 5 min hack bullshits..
Wow! Awesome project and great video. You are very skilled, and this is inspiring! Cheers :)
Thanks buddy. I appreciate
do you have any alternative thing to use rather than arduino?
It is made at the home but is made by a professional skilled worker.
Thanks buddy
Hello Sir. How can I make the data from the load cell stable during calibration? It gives me a data (weight) but turns back to zero after a while.
Check with the code.
Just add some functions.
Where do you solder load cell wiring🤔 without solder how machine will shows weight.. Its not possible to show weight
Ya that part video didn't get recorded, but it is soldered to the Arduino with 2 data line and 5v/gnd.
@@MakerMan ok next time u shows all the details in video's
👍
What is the size of the metal box? Thank you
The code download is broken, can you give me the code, please?
So weighing scale use bending moment to calculate weight.?
Yes
awesome.. how it can be calibrated? and what is the function of the push button switch?
Best video ever seen on diy arduino homemade weighing scale
+Mukesh Kalra thanks buddy.
Brave man welds in flip fops.
Hehe
hi sir,
Can make a weight measurement device for the same size the length of truck????
English please?
@@MakerMan Can make a weight measurement device for the same size the length of truck????
Oh, yes it can be scaled up in to a size of a truck.
Hi? how do i know the out in serial.print? please notice me
Project reference is not working, it is possible to update
What type of arduino you used??
I have sim800l and arduino uno and hx711 I have scales but I can not forward data by sms. Could you help me please?
Yup, with a gsm module
If any one wondering about the background music. It is from the game Black Squad which often comes while match making.
;)
thank you. I was just looking for like this. Making diy devices looks really fun.
Thanks buddy
Surely where you stand on this scale will affect the leverage..... and thus the weight reading
Great video. How much did you spend ? And how precise it is the scale ?
Hi
The video is really helpful. I am working with 150 kg loadcell, but I am not getting proper output. The values I get keep increasing irrespect of weight i put. can you pls help.
i am having the same problem with 500kg load cell. managed to solve?
how to check if the wiring is properly connected or the Hx711 module is ok
maybe it's better to use 4 cell approach? it way more stable when the weight is placed not in the center of the platform
True but this works fine
Bhaiya I can download the code plz, give me the code
what materials did you use in making this weighing scale ? what kind of metal and platform ? please reply thank you..
+Beth Dela Torre meld steel and platform in stainless steel
i don't understand your connection ., please tell me connetion of lcd 16pin, arduino, & hx711. please reply
It's simple good it
can you send the code link of arduino again, the link didn't work with me
I need to check
Great! But where is the schematics?
i really love your work.. it really help me for my thesis. thank you
+Kareendahl DT great. Thanks buddy
خیلی عالی بود. کلیپ زیبایی تهییه کرده بودید.
English please?
How much does it cost to make
Sir, I got a project to make small digital weighing scale...maximum weighing capacity will be around 10 KG...😢
Possible
Hello sir how much is the total weight of the device? i mean the weight of the weighing scale which compose of bars and metals
+christian cantos the whole machine Will be around 15 kg.
thank you for the reply sir great info
Approved is the best take.
Thanks buddy
Good work 👌👍 your content amezing thanks sir
Bro plz re-upload the code in description i need it very urgently or directly send to me plz plz
Were can we download the library for using the load cell?
+Andrei in video description
Nice job but I wouldn't suggest welding with the load cell installed. Jay, A and A Scales LLC
+Jay A and A Scales LLC true, but I sheild it while welding
Great job, but it is not advised to weld with the load cell in place. Welding current will damage a load cell. If necessary remove the load cell prior to welding. If you absolutely cannot remove the load cell, ensure you ground the welder as close as possible to the position where you are applying the weld, and not through the load cell
+Jay A and A Scales LLC oh. Great advice. Thanks.
Satig
Can I get code for this because link is not working
I lost it myself somewhere in my pile of HDD backups. I will look for it. Give me some time.
I need it until tomorrow bro I have my final year project tomorrow and I am facing some problems with the code I have it's not giving correct weight measurement and value for calibration factor of known weight is also showing variation
what if 300kg didn't make any changes to the code
Just need to calibrat.
great work 👍👍👍👍👍👏👏👏👏
Thanks buddy
Hi .. Good day
what calibration did you use ? Please reply thank you.
+KdahL D.Torre I use another high quality weighing scale and calibrated with 1kg weigths.
Thank You :) Can you help me with the codes in arduino and others ? Please ? we are having hard time to do it
+KdahL D.Torre I have posted the code in the video description
ohh.. thank you.. sorry i did not see it XD
your video was really amazing. thank you
@makerman Can you tell me what kind? I want to measure 200 pounds with an accuracy of 0.001
+שלי מתן you will have to do some research. I don't know which model is need.
Drug dealer......
which weight sensor did you use?
+Jeffrey Redondo it's a 200kg load cell. Don't recall the model number.
can i do the accuracy 0f 0.001? how?
+matansheli12342 yes. Using different load cell
MakerMan Can you tell me what kind?
one that has less max weight, like 20kg
Yes
That was a nice project. I try to make it, but i can find the wiring diagram from load cell 200kg to hx711
I hope you can share the wiring diagram 🙏
www.flentas.com/assets/images/blog/real-time-graph-part1-pic3.png
@@MakerMan i have try that wiring too, but the there no happend. Always 0kg read hmm
May be the load broke?
Try serials monitor
@@MakerMan yes sir i have try in serial monitor, but the weight has not changed
Check again the wire and check with another load cell
what is the maximum weight can this scale measure?
+deedee htet 200kg
Muito bom o projeto, poderia disponibilizar o exemplo?
Link not work expire
how to program arduino
how about the wiring sir? thank you
Love from Bangladesh,💓
What is the maximum number of kg the scale can carry?
200kg
and why doesnt this have 20 million views???
how we can calculate platform dimension?
Not that important
but i think if the platform length and wide chosen bigger then capability of the sensor ,it's may cause damage to sensor by applying load at corner of platform.
Is a 200kg sensor and I kept the dimensions fairly smaller, it around 50 x 40 cm
okey , i'm working on 250kg scale project with obu-250kg sensor , but try a little( 1.3 ) bigger platform then it's recommended dimension.
Circuit digram please
Where is code there is nothing please give me code
Good work
Thanks
@@MakerMan i need to know one thing.... Is there is any chance for breaking load cell...( If we putting small load cell) and are you getting precise value
That was awesome, however I felt like I was watching some 80s television show like Miami Vice and you were rushing to finish it before the drug cartel bust into your room and stole your project. So when is the mini series coming out.
Hahahaha I like your comments
What length and width u have taken
Can't remember.
But I guess 60cm x 40cm
Awesome Project !!! Can i get more details about the Circuit Connections or a Circuit Diagram Please...
sure. email me
can you send them to me?
i get more details about the Circuit Connections or a Circuit Diagram Please..., thank,
edward.udep@gmail.com
Read the video description please
stylé le fraté
दोस्त किया आप बता सकते हो इलेक्ट्रॉनिक्स काँटों का स्पेयर पार्ट्स दिल्ली में कहा मिलता हैं।
?
Ye Kit kaha milegi
It Arduino and other components not a kit
Nice job.
Thanks 👍
What about the circuit diagram for arduino
did you get it?
Your work is very interesting, for repair ing or homemade please state an address for maintaining the electrical components.Thank you
Ok
very nice video :) I like it
+firefighterml thanks buddy
bro every thing is good including ur concept but i am gonna use it for my shop so i need a tare button ...can u please provide tare button connection and its code please
There tare already in this
@@MakerMan can i use this code in arduino uno r3??? coz i have that module...and u used in the video was another.?? if not then can u give me codes for uni r3 pls??
where is the code man
can you do the scales to send data via SMS?
+Oleg Casapu yes. If u added a esp8266 module.
Excellent Video
Thanks buddy.
I appreciate your comment
Nice project. How to set in lbs in the code?
*2.20462
awesome video!!what arduino did you use?
+teo geo nano
Hello, Can I have the datasheet of the loadcell please ?
I sorry it was an old project. I made it when I came for vacation in India.
Just get 200kg load cell with 4 pin.
MakerMan it's just that i have a load cell of 100kg and its excitation voltage is between 9v to 12v so i just wanna know if its gonna be a problem with the amplifier hx711 and arduino to give the right supply to the load cell ?
Try with 5v it's should work
MakerMan that's why i tought becaise hx711 send a supplu btw 2.6v and 5.5v so its better to have a load cell with exctitation voltage of 5V to 10V its gonna work right?
Yes it should work
Is this a new workshop
+Ahmad Hasan na, i came to my home town. Its a small home tool room.
how many rupees 200 kg loadcell
70$
Nice sir
can Hx711 read 0.0001 gram? :)
@MakerMan how much did it cost u totally?
pls reply
+Abdul Aziz Khan Around 50$
Sir weighing Machine Ko Control Krny TareeQa Detail Se Btaa Den. It's Mean Jo Aap Ne (Screen+Module+Chipp) ETC Use Ki Hai Us Ke Connections Detail Se Bta Deen PleaSe
English ?
Haha you make some awesome shit! I love your videos :)
+Dejay Rezme thank you for ur awesome comments
Nice one
Thanks buddy
Great job
+Jesus Tellez thanks buddy
What is the price?
Hy Brother wow the project is fantastic please if you are there let me ask some questions Thank You
Sure
@@MakerMan Thanks I try what you did but the load cell is 150 kg I get from a bathroom scale and the Arduino is Uno when I run it the kg is shown but not the exact value I try calibrate with 1 kg then 5 kg still not shown exact result then I try to change the calibrate factor which is this " scale1.set_scale(-11410);" but I can't do It by this what shall I do?
so much thanks am waiting your answer thank you
Can u make scale for sale,i m a hole seller of weighing machine
I can
Load cell price for 1000kg
I don't know sorry
Sir please make new vedio to show wegingscale circuit diagram
Please sir explained thise
Sure
its accurate 100%??
Yes
bhai 200 kg loadcell ki kitni kimat h
English please.
What is full cost
Don't remember, long back.
30$-50$ I guess
kitne me banta he
English
@@MakerMan how much cost?
Around 25-35 $
pls send me the circuit connection
Just Google load cell with Arduino.
If still u not getting, let me know.
I cant figure out how you connected the lcd screen, tried googling but the parts are different from what you used in the video
Sorry the scale is in my home town and I don't recall the model number.
But it's super easy. Try with my code.
I only say, safety at Work ...
supercool!!
Thanks
Welcome
easy wala waiting machine Dikhao Na bhaiya
This is easy to do.