THANKS DUDE!!!! For Ford Explorer 2014, put 2 programmed keyfobs near cupholder area. Close doors. Put 1 to program in the pocket inside center armrest console. Pointy side DOWN, buttons FACING FORWARD FRONT of vehicle. 3 unlocks 1 brake 3 locks 1 brake 1 START press Max is 4 keyfobs.
Wow....I am totally STOOPIFIED at how simply SIMPLE that was...I almost paid a silly amount of money to get it programed...crazy thanks man...crazy thanks.
We ordered aftermarket key fobs and we were able to follow this process to program extra fobs for both our 2014 Explorers. Everything works - lock/unlock/remote start/hatch. Done in 15 minutes. TY!!!
Best instructions out there. The most important step. replace the battery. On my 2013 Explorer the only difference is they fob need to have the buttons towards the rear of the vehicle.
I have a 2018 Ford Taurus Sel, followed your instructions and worked as you mentioned. THANK YOU! Purchased two keys from ebay for about $30 dollars, it programed both keys, now have 4. Thanks Again
Thank you so much! You saved us at least $100 and some time by not taking it to the dealer to reprogram. We were able to reprogram one additional key but then it said we reached the limit. Now we need to figure out how to remove the key that was on the fritz.
This worked on my 2017 Taurus on the first try. Very easy to do. On the 2017 Taurus the programming slot is in the left rear of the console and is vertical, just face the buttons toward the driver's side. Thank you.
Awesome...this procedure worked for my 2017 Expedition Limited...thanks so much for saving me the big $$$ the dealer charges for this so simple procedure of less than 5 minutes total to program two spare fobs.
I agree WOW! What a great video showing how to program the key. Once I found the slot to place the key and had in facing the correct way it worked perfectly and only took about 30 seconds to complete. In our 2016 Lincoln Navigator the slot was in the very back of the console and you need to place the new fob with the keys facing the back of the vehicle. Thank you VERY VERY much for making this video.
Thanks for saying @:12 that it won't work if you only have one working fob. Saved me a lot of frustration. I have to bite the bullet and pay the dealer $160 to program a fob, plus the cost of the fob.
I have a 2013 explorer limited. It took me several attempts and finally worked. The two working keys location is important. I placed mine right at the edge of the center console and i did get a message of a 3rd key programmed.
I did this in my 2013 Ford Flex this works 👍🏾 . My tip put the two key fobs in the arm rest too so it can be near the new fob you’re trying to program.
Agreed. Placing the existing Key fobs inside the center console worked for me. I wasn’t having any luck with the existing key fobs placed in the cup holder.
I had two remotes, one good....one inactive. I was at least able, with your instruction, to get the dead one to start the car independently but couldn't get the features to activated. No lock/unlock etc. I'm appreciative just the same and will keep playing around to see if I can figure anything out. Otherwise I suppose I'll have to learn how to use the number code on the door. Not as happy about that for safety/time reasons but at least I now have a backup to start it. Thankyou very much :-)
For the 2017 Ford Escape Titanium...the manual actually has the steps but the spot for the key is simply in the front console area where you plug your USB into under the AC controls -- just lay them down in there. You have to put both of your working keys in that spot one at a time and turn on and off using the start button and waiting 3 to 5 seconds each time (no unlock / lock like this video). The 3rd key you put in the tray will finally get programmed and work after a few tries but there didn't seem to be any message or indication -- mine just worked after a few attempts. There is another spot on the steering wheel that shows a key with radio signals but that's not where you program the key -- that is where you can start these cars if the battery on your key goes bad. Hope that helps others that are struggling with your 'unique' Ford that doesn't seem to match any of the videos or info out there. You do need both keys which is likely partly for security reasons but also another nice money making scheme in my opinion too. I love the other videos out there from locksmiths that show you need a special device to do this -- you don't. Its really a shame they try to make this so hard for the average person to do since to me a key shouldn't cost a fortune to replace.
Yup, works, but as others have said may need to put the old keys in the console tray close to the new one in the slot. Also, I'd make sure the when you hit the door unlock and lock that the first time of each sequence you hear that hard clank sound you hear when locking or unlocking the car. Hope that helps.
This worked just as described (I did have two working remotes already). I have a 2017 Expedition Ltd. Backup slot for key fob is in the back of center console. Remote had to be placed in there with buttons facing against the back (not facing out). Engine start/stop button did not flash, nor any message on the console. But key fob was programmed. Very helpful video.
Thanks I’m going to order one! eBay sellers are saying take to dealer/locksmith(?) Also nothing about Programming in my Ford manual.. why is it a secret?
so i have a 2014 edge with 2 keyfobs. they both work to open /close doors and trunk but only one remote start works. is there a way to reprogram the 2nd keyfob without taking to the dealer and taking out a 2nd mortgage to have it done . tks
Thanks. I had one programmed key fob. I had to get one of the keys I bought programmed and then I programmed the other one via your video so thank you for saving me 35 bucks because they charged me 70 for the one key. It says on the display that there are 4 keys programmed I would like to delete the one that's missing if possible.
So what do you do if only one fob works. I just ordered a new one from amazon. Now I’m worried . Can reprogram the original fob that works and the new one from Amazon?
Hello, OK I found your video both of my key fobs will not work if I order another one from Amazon what’s the chances of that working instead of paying $300 Or does the dealership have to program them if they’re not working at all I’m totally lost if you don’t mind answering my question thank you Michael
So I need 2 working keys? As in both can unlock the car? I only have one working key and wanted to buy 2 duplicates off Amazon to program using this method.
i tried it and it worked but in my case I had to put the other two key fobs inside the center console next to programming cradle. Thank your for shearing.
Great info I have 2 key fobs both with two new batteries, followed your directions as you said, fobs both work when I put both fobs in the charger both start 2013 explorer up. Just not communicating signals , if you have some advice as what I may not be doing , your input would greatly appreciated thanku.
Tried this on a 2021 Bronco Sport, did not work at all. The programming slot is in a different location, but was still able to find it. Regardless, this didn't work. Is this process unique to Explorer? Does it only work with that exact Key FOB?
@@caliveteranOIF you can often use your key by holding the fob next to the push button and it’s like a magnetic signal thatcc bc an start it if there’s no slot
Thanks for this very well-done video. We bought our 2017 Expedition with only one proximity key, and it’s acting erratically (will lock doors, but won’t unlock them). Just to be 100% clear, are you saying I can buy another one and I will be able to use this method to program it, or I will need two WORKING proximity keys in order to program the new one? Thanks again!
Hello Joe, i was in your boat. i bought a second refurbished key and an obdlink ex cable and used a free software called for scan and programmed it myself. You can’t follow the instructions in the video
Only have One key fob, lock button does not lock doors only if u press lock on door manually. Bought a new key fob from amazon, how to i program that ?
hello, my question is if you need the two original keys near the console to program a third one? I only have one original key that is giving me problems and the other one is missing. thank you very much.
Thank You!Your video was right on time.The rubber behind one key fob wore out and the lock and unlock wouldn’t work.I ordered the third keyfob from Amazon and just programmed it today.Thanks again!
Worked like a charm on my 2011 explorer but make sure the buttons are facing towards the engine in the programming slot and the other fobs are in the console with it. TyTyTy😅
Incredible but true. THANK YOU. I manage to program the key for my Ford Explorer 2014 and save about $400+ that the where charging at the dealer. My old remote was stuck and dry my battery… it was urgent to replace the remote. This is a win situation. Thanks a lot
I have the same key for my 2017 Ford Expedition Limited, two are from the factory, but I purchased the more square one, a bit more heavy duty, it has the same function as my factory one, however I’m trying to find out how to program it, it doesn’t fit in the slot in the console, Any ideas 💡????
I have cmax 2016, it won’t start up today suddenly. When I opened the door, the click click sound appears, like water drops from the roof. The clicks last long time to stop. I tried your instructions “3 buttons on unlock, 1 brake, 3 on locks, 1 brake”, it does not work. Please help how to start up the car. Appreciate!
We just purchased 2013 flex, do you remember which one you purchased? There is so many option online with mixed reviews it’s hard to tell which is legit. Thanks in advance
THANKS DUDE!!!!
For Ford Explorer 2014, put 2 programmed keyfobs near cupholder area.
Close doors.
Put 1 to program in the pocket inside center armrest console. Pointy side DOWN, buttons FACING FORWARD FRONT of vehicle.
3 unlocks
1 brake
3 locks
1 brake
1 START press
Max is 4 keyfobs.
Thanks
Wow....I am totally STOOPIFIED at how simply SIMPLE that was...I almost paid a silly amount of money to get it programed...crazy thanks man...crazy thanks.
Glad it helped, have a good one
@@addismultitasking3504 many thanks
We ordered aftermarket key fobs and we were able to follow this process to program extra fobs for both our 2014 Explorers. Everything works - lock/unlock/remote start/hatch. Done in 15 minutes. TY!!!
Thats good to hear. Have a good weekend
Best instructions out there. The most important step. replace the battery. On my 2013 Explorer the only difference is they fob need to have the buttons towards the rear of the vehicle.
I have a 2018 Ford Taurus Sel, followed your instructions and worked as you mentioned. THANK YOU! Purchased two keys from ebay for about $30 dollars, it programed both keys, now have 4. Thanks Again
I'm glad it worked!
Thank you so much! You saved us at least $100 and some time by not taking it to the dealer to reprogram. We were able to reprogram one additional key but then it said we reached the limit. Now we need to figure out how to remove the key that was on the fritz.
glad it helped
You’re amazing! Thank you from the bottom of my heart! Your knowledge and experience is greatly appreciated. Please like and follow this man!!!
Glad it helped
This worked on my 2017 Taurus on the first try. Very easy to do. On the 2017 Taurus the programming slot is in the left rear of the console and is vertical, just face the buttons toward the driver's side. Thank you.
glad it helped
Awesome...this procedure worked for my 2017 Expedition Limited...thanks so much for saving me the big $$$ the dealer charges for this so simple procedure of less than 5 minutes total to program two spare fobs.
Glad it helped!
I agree WOW! What a great video showing how to program the key. Once I found the slot to place the key and had in facing the correct way it worked perfectly and only took about 30 seconds to complete. In our 2016 Lincoln Navigator the slot was in the very back of the console and you need to place the new fob with the keys facing the back of the vehicle. Thank you VERY VERY much for making this video.
Glad it helped!
Wow organized direct to the point no extra time wasted but slow enough you can follow along perfect presentation Thank you!
Glad it was helpful!
Worked like a charm for my 2018 Ford Flex. Thank you.
awesome
Worked like a breeze after i found my second admin key . Thanks a ton !
You're welcome!
Worked great for our 2015 Expedition on the 2nd try. I ended up putting all the keys in the storage compartment. Thx
Thanks for saying @:12 that it won't work if you only have one working fob. Saved me a lot of frustration. I have to bite the bullet and pay the dealer $160 to program a fob, plus the cost of the fob.
Glad the video helped you, You might be able to program your Fob with Forscan program and the obd to usb adapter..around 40.00 amazon
Thanks dude. Helped me a lot. Needed both factory keys with fresh batteries to program the aftermarket one. Worked well
glad the video helped, have a good weekend
Is there a way I can program the second one if I only received one when I bought it?
I have a 2013 explorer limited. It took me several attempts and finally worked. The two working keys location is important. I placed mine right at the edge of the center console and i did get a message of a 3rd key programmed.
I did this in my 2013 Ford Flex this works 👍🏾 . My tip put the two key fobs in the arm rest too so it can be near the new fob you’re trying to program.
Agreed. Placing the existing Key fobs inside the center console worked for me. I wasn’t having any luck with the existing key fobs placed in the cup holder.
Worked for me 2017 Taurus SEL Thank You Very Much btw manual says Dealer Only
Good to hear
Thank you much for the video!! Had to program another one today and thanks to you I was able to do it. Cheers!
Glad it helped!
I had two remotes, one good....one inactive. I was at least able, with your instruction, to get the dead one to start the car independently but couldn't get the features to activated. No lock/unlock etc. I'm appreciative just the same and will keep playing around to see if I can figure anything out. Otherwise I suppose I'll have to learn how to use the number code on the door. Not as happy about that for safety/time reasons but at least I now have a backup to start it. Thankyou very much :-)
You may try undoing the car's battery waiting 3 minutes hook it back up and then try reprogramming the remote
OMG thank you 😊. This worked for me to reprogram after a battery replacement with only one key. You saved me !
You're welcome!
You only had one original key ?
1 key fob works instead of 2? I only have 1 and need to program another will it work for me
Same question i have 1 original key will it reprogram the other one?
For the 2017 Ford Escape Titanium...the manual actually has the steps but the spot for the key is simply in the front console area where you plug your USB into under the AC controls -- just lay them down in there. You have to put both of your working keys in that spot one at a time and turn on and off using the start button and waiting 3 to 5 seconds each time (no unlock / lock like this video). The 3rd key you put in the tray will finally get programmed and work after a few tries but there didn't seem to be any message or indication -- mine just worked after a few attempts. There is another spot on the steering wheel that shows a key with radio signals but that's not where you program the key -- that is where you can start these cars if the battery on your key goes bad. Hope that helps others that are struggling with your 'unique' Ford that doesn't seem to match any of the videos or info out there. You do need both keys which is likely partly for security reasons but also another nice money making scheme in my opinion too. I love the other videos out there from locksmiths that show you need a special device to do this -- you don't. Its really a shame they try to make this so hard for the average person to do since to me a key shouldn't cost a fortune to replace.
Yup, works, but as others have said may need to put the old keys in the console tray close to the new one in the slot. Also, I'd make sure the when you hit the door unlock and lock that the first time of each sequence you hear that hard clank sound you hear when locking or unlocking the car. Hope that helps.
The secret handshake with the car made me laugh-but very glad this info is out there! No one should pay 300 dollars for that!
Thanks for watching, have a good week
Worked perfectly for my 2017 Expedition. Thanks for a great video and cost saving tips.
Im glad it helped, have a good week
This worked just as described (I did have two working remotes already). I have a 2017 Expedition Ltd. Backup slot for key fob is in the back of center console. Remote had to be placed in there with buttons facing against the back (not facing out). Engine start/stop button did not flash, nor any message on the console. But key fob was programmed. Very helpful video.
Glad it helped
I am ordering one right now, thank you 🙏🏾
This worked on my 2016 Ford Flex... thanks much
your welcome
What about for a 2017 Ford Escape? Where is the programmable slot for the Escape?
Thanks I’m going to order one! eBay sellers are saying take to dealer/locksmith(?)
Also nothing about Programming in my Ford manual.. why is it a secret?
Because they want your $$$.
OMG! THANK YOU SO MUCH! My buttons on my fob were breaking off & all I had left was my unlock button. Save me SOOOOOOOOOOOO much money!
Glad I could help!
My current situation now only unlock and hatch works the push start and lock button are broken
so i have a 2014 edge with 2 keyfobs. they both work to open /close doors and trunk but only one remote start works. is there a way to reprogram the 2nd keyfob without taking to the dealer and taking out a 2nd mortgage to have it done . tks
It worked on my 2015 Ford Expedition EL Limited! Thank you so much!
That's good to hear have a good rest of the day
There is no pocket under my lighter in the center console?
Would this work for my 2016 Ford Taurus? It has the same key you have.
Thanks. I had one programmed key fob. I had to get one of the keys I bought programmed and then I programmed the other one via your video so thank you for saving me 35 bucks because they charged me 70 for the one key. It says on the display that there are 4 keys programmed I would like to delete the one that's missing if possible.
just found this video THANK YOU it really saved the day🎉
You saved me 300 dollar thank you so much your video works for me the others make lil mistakes your so awesome 👏
Glad it helped
I have 1 working FOB, will this work with just the one working one?
Does it program just remote or it can program also chip for car start?
So what do you do if only one fob works. I just ordered a new one from amazon. Now I’m worried . Can reprogram the original fob that works and the new one from Amazon?
I bought a 2015 navigator, it came with one fob is there a work around
Hello, OK I found your video both of my key fobs will not work if I order another one from Amazon what’s the chances of that working instead of paying $300 Or does the dealership have to program them if they’re not working at all I’m totally lost if you don’t mind answering my question thank you Michael
So I need 2 working keys? As in both can unlock the car? I only have one working key and wanted to buy 2 duplicates off Amazon to program using this method.
Hi, if we have one main key and have to make a spare then how do we do it, go to the dealer? Thanks
Can this be used for a second hand ley progroammed
To a scrapped car ?
Hi! I have one key with a 13 escape push button start. This wouldn’t work correct? If not what do you recommend? Thank you!!
Here's my question. I bought a used 2019 Ford Explorer XLT. It only came with one key. Will this method work if there is only one key present?
It works, Thank You Had to get a new fob for my mom's sonic used RUclips saved $140. Thank you utube.
awesome
Can I do this if I buy two new fobs after my wife lost the only one we had left?
i tried it and it worked but in my case I had to put the other two key fobs inside the center console next to programming cradle. Thank your for shearing.
glad the video helped you
Thanks, life saver, greatly appreciate you man!
thanks for watching
If only I had known this before my husband lost the spare key. Is there no other way with only one fob?
What should I do if I only have one key how can I program a new key?
Take it to the dealer. That is all. You’ll be looking at $500ish
Have a 2013 Ford Taurus. Followed the steps exactly (including new battery), but it didnt take.. Suggestions?
Great info I have 2 key fobs both with two new batteries, followed your directions as you said, fobs both work when I put both fobs in the charger both start 2013 explorer up. Just not communicating signals , if you have some advice as what I may not be doing , your input would greatly appreciated thanku.
Thank you very much 😊
just out of curiosity why do you have to have two working keys it didn't seem like you did anything with them?
Worked!! You save me $100's
awesome
Tried this on a 2021 Bronco Sport, did not work at all. The programming slot is in a different location, but was still able to find it. Regardless, this didn't work. Is this process unique to Explorer? Does it only work with that exact Key FOB?
Hi, does this work on a 2011.or 2012 Ford explorer model
Can you do this on my 2014 Ford Cmax Energi??
does this work for all ford cars as well? I have a 2016 c-max hybrid and what should the key be, 434 MHz or 315 MHz?
Will it work if both my keys are mykey? I need to make an admin key
I have a 14 edge with two fobs one works perfectly the other works but irregularly. Will that be ok to program the third new one? Thanks.
yes it should
Ok, great. ...Thanks.🙂@@addismultitasking3504
New one in Pocket under Lighter
Two WORKING FOBs at Canter Console!
Unlock=3 Times
Brake pedal=1
Lock=3 Times
Brake pedal=1
(Sound right?)
So this should on my 2014 ford cmax right
your the best lil brother. Thank you .
Glad to help
For Ford Explorer limited 2013 and have one key remote, will it work sir?
Do you need to have 2 working keys? 1 won't work?
Does this work on the 2022 focus models
No spot for key fob on my 2014 ford focus titanium ☹️. Please help
It’s in your glove box
The Focus most likely doesn’t have the same programming procedure. Any luck finding a way to do it?
@@caliveteranOIF you can often use your key by holding the fob next to the push button and it’s like a magnetic signal thatcc bc an start it if there’s no slot
@@fvictor77 ok…
@@caliveteranOIFdid you figure out how to do it?
Will this work on a 2021 Ford Escape with remote start?
Thanks for this very well-done video. We bought our 2017 Expedition with only one proximity key, and it’s acting erratically (will lock doors, but won’t unlock them). Just to be 100% clear, are you saying I can buy another one and I will be able to use this method to program it, or I will need two WORKING proximity keys in order to program the new one? Thanks again!
Hello Joe, i was in your boat. i bought a second refurbished key and an obdlink ex cable and used a free software called for scan and programmed it myself. You can’t follow the instructions in the video
Does this work with a 2018 Escape Titanium?
Thanks.I have the same car,edge limited
I only have one key fob if I by one off Amazon will
I b able to reset my key settings I’m on a restriction of 80 mph .
is this the same for a 2013 ford cmax car?
I bought the car and got only one key! What supposed i to do in this case? Should I buy 3 keys and do a reprogram?
Pls assist.
Only have One key fob, lock button does not lock doors only if u press lock on door manually.
Bought a new key fob from amazon, how to i program that ?
hello, my question is if you need the two original keys near the console to program a third one? I only have one original key that is giving me problems and the other one is missing. thank you very much.
Did you solve your problem with only one?
Some one stole one of my Fob key, is there a way to reprogram my Fob Key myself?
Thank You!Your video was right on time.The rubber behind one key fob wore out and the lock and unlock wouldn’t work.I ordered the third keyfob from Amazon and just programmed it today.Thanks again!
Glad I could help
I have a 2013 Ford Explorer and we cannot get this to work. Any advice?
We do this with the car on or off?
I dispose only one remote, I think is secondary one because I have some options fixed like speed limit and volume. Can I make this programming method?
Your saying you only have a mykey not admin key
@@oczkowski8 yes, but now I fixed that issue. I clone a new one as a prior remote and everything was reset after that 🙋♂️
Worked like a charm on my 2011 explorer but make sure the buttons are facing towards the engine in the programming slot and the other fobs are in the console with it. TyTyTy😅
awesome
Incredible but true. THANK YOU. I manage to program the key for my Ford Explorer 2014 and save about $400+ that the where charging at the dealer. My old remote was stuck and dry my battery… it was urgent to replace the remote. This is a win situation. Thanks a lot
your welcome
I only have one main key and an amazon key can i program the amazon key
So can I program one I ordered the used car dealership only had a single key no fob or spare key
Does this work for 2014 Taurus? I've tried it multiple times but it's not working, if not, is it even possible without the dealership?
I ordered a 2016 escape from carvana and it's only coming with one fob. Why do you need to have the two original fobs to get a third to work?
Give it a try, but thats the way it works in an edge
I have the same key for my 2017 Ford Expedition Limited, two are from the factory, but I purchased the more square one, a bit more heavy duty, it has the same function as my factory one, however I’m trying to find out how to program it, it doesn’t fit in the slot in the console, Any ideas 💡????
I have cmax 2016, it won’t start up today suddenly. When I opened the door, the click click sound appears, like water drops from the roof. The clicks last long time to stop. I tried your instructions “3 buttons on unlock, 1 brake, 3 on locks, 1 brake”, it does not work. Please help how to start up the car. Appreciate!
Why did you have to have 2 working key fobs to program the 3rd
Excellent, thank you. Had one FOB go through the washer and still works for starting, doors, but not hatchback or remote start...buy another I guess
So did it work when you bought a spare
I cannot find the slot that you are talking about. 2017 Escape.
Same times it’s in the glove bottom or ask your dealer
Could not find slot in my 2023 Escape Titanium !
My escape has the programming notch on the right side of the steering column covers. I will have to perform more research.
Worked for me on a 2013 for flex
also
Cool
We just purchased 2013 flex, do you remember which one you purchased? There is so many option online with mixed reviews it’s hard to tell which is legit. Thanks in advance
Second attempt on my 2014 Taurus Limited, bingo, thanks!
Nice work!
I have a 2018 F150 lariat, do I need to program key fobs to do this or can I reprogram with one?
You must have 2 working and programmed fob's to program a new one
What pocket you mean ?