I turned my Diamond Play Button into a Gaming PC
HTML-код
- Опубликовано: 7 апр 2021
- Check out the DROP ENTR Mechanical Keyboard at dro.ps/ltt-entr-april21
Get up to 30% off your order and free shipping at: vincerocollective.com/techsale
We put a PC into our Diamond Play Button - and it's sooooo sick... and of course also a bit janky.
Even more machining footage! • CNC Machining the Diam...
Check out SS CADCAM: sscadcam?h...
Check out SimplyNUC: simplynuc.com/
Buy Intel NUC Kit - i7-10710U (PAID LINK): geni.us/bRu3a3
Buy ASRock DESKMINI (PAID LINK): geni.us/F5CI2v
Purchases made through some store links may provide some compensation to Linus Media Group.
Discuss on the forum: linustechtips.com/topic/13240...
►GET MERCH: www.LTTStore.com/
►SUPPORT US ON FLOATPLANE: www.floatplane.com/
►LTX EXPO: www.ltxexpo.com/
AFFILIATES & REFERRALS
---------------------------------------------------
►Affiliates, Sponsors & Referrals: lmg.gg/sponsors
►Check out our podcast gear: kit.co/linustechtips/lmg-podc...
►Private Internet Access VPN: lmg.gg/pialinus2
►Our Official Charging Partner Anker: lmg.gg/AnkerLTT
►MK Keyboards: lmg.gg/LyLtl
►Nerd or Die Stream Overlays: lmg.gg/avLlO
►NEEDforSEAT Gaming Chairs: lmg.gg/DJQYb
►Displate Metal Prints: lmg.gg/displateltt
►Official Game Store: www.nexus.gg/ltt
►Epic Games Store (LINUSMEDIAGROUP): lmg.gg/kRTpY
►Amazon Prime: lmg.gg/8KV1v
►Audible Free Trial: lmg.gg/8242J
►Streamlabs Prime: geni.us/cOHCiHh
►Our Gear on Amazon: geni.us/OhmF
FOLLOW US ELSEWHERE
---------------------------------------------------
Twitter: / linustech
Facebook: / linustech
Instagram: / linustech
Twitch: / linustech
FOLLOW OUR OTHER CHANNELS
---------------------------------------------------
Techquickie: lmg.gg/techquickieyt
TechLinked: lmg.gg/techlinkedyt
ShortCircuit: lmg.gg/shortcircuityt
LMG Clips: lmg.gg/lmgclipsyt
Channel Super Fun: lmg.gg/channelsuperfunyt
Carpool Critics: lmg.gg/carpoolcriticsyt
MUSIC CREDIT
---------------------------------------------------
Title: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro Screen Music Credit: Approaching Nirvana - Sugar High / approachingnirvana
Monitor And Keyboard by vadimmihalkevich / CC BY 4.0 geni.us/PgGWp
Mechanical RGB Keyboard by BigBrotherECE / CC BY 4.0 geni.us/mj6pHk4
Mouse Gamer free Model By Oscar Creativo / CC BY 4.0 geni.us/Ps3XfE 
Наука
Part 4: Gaming on my Diamond Play Button PC with my Solid Gold Xbox controller! #FLEX
...mining ancient debris in Minecraft
and with the all metal keyboard
@@agnieszkarajder2821 xd
don’t give ideas
@@Plormby Well I want to see that. So yes give them ideas
Stoners looking at anything: "Huh. That would make a great bong."
Linus: "You pronounced 'custom PC case' wrong my red-eyed friend."
Haha heart go brr
Iam wondering what comes next. Maybe a Raspberry Pi in a Mouse or something or in a Keyboard...
@@mrn234 well there's a raspberry pi in a keyboard already
Hi monke
linus do it... -.-
the gem having a crack in it is fitting for Linus since he drops everything
This was literally the first thing that came to mind when he pointed out the crack. Also, i wish they had etched LTT in the plate under the stone, just in case it would have been visible.. Or maybe a watermark style of many small etchings all over the back plate since it isn't the same color/finish. GJ all
As difficult it might have been to make work, imagine if the 'diamond' part was the actual power button.
Yea that would've been way cooler. All you need is a tiny spring with a switch button inside it. Then when you push the button, the spring compresses and the diamond hits the switch.
@@Exachad Then the diamond light up
lol
That would have been pretty cool
That’s what I was thinking when they were talking about power button
You guys should turn the Gold Play button into the external GPU housing. That way you can have the two buttons on either side of a monitor.
This comment is genius but the gold play button is a frame with the play button
Was gonna comment the same thing, you beat me to it lol
Well then the solution is to just develop another channel to get the new one
@@jhonmichaelpaner316 the old one
Yes! instantly thought the same when he mentioned eGPU haha
That was awesome.
Sup hacksmith
First reply to a good RUclips channel
you can watch faster than your lightsaber cutting wood
Hi hacksmith
Yo wassup
I could imagine this dude in a couple decades making a video titled:
“I Turned Myself Into A PC”
“Funniest shit I’ve ever seen”
He'll probably water cool himself
Cyberpunk 2077
@@andreibalasa745 all humans are water-cooled now... it's called blood!
@Prince Tyre Legendre who?
Wow. Alex did an amazing job on this one. He’s a man of many talents!
Yeah, lots of respect for people who can 3D CAD and also do EE, CS, other tech stuff. It's hard to find someone who is that multitalented.
NO UR WRONG, ONE YEAR FROM NOW LINUS WILL GET A NEW CAMERA MAN AND ALEX WILL HELP HIM IN HIS VIDEOS BUT ALEX WILL FORGET HIS PLACE AND TRY BEING BETTER THAN LINUS
RUclips: Here is your own 10M play button
Linus: ''Play''? Is for playing?
RUclips: No, is fo-
Linus: Too late
This comment is very underrated
@@abdelrahmanabdelraouf6201 your reply is very underrated
@@alvanbanna330 You are very underrated
@@Fuenzy Your mom is my mom
100th like
You took the word "Play" seriously.
xD
This was guud
Nice
@@sloshforbrains the fuck is wordplay? It's a pun
@@sloshforbrains out played the play!
Haha the crack in the Diamond makes it even more "Linus"-Custom! 💎😂
This HAS to be the most creative thing I've seen anyone do with a play button!
Congratulations and thanks for trusting me! The final product turned out great!
It blew my mind when Linus mentioned that you tuned the pathing to make it look cooler. Just thinking about doing 5 axis makes me nervous, and you're doing it literally with style!
Absolutely gorgeous work on that, and yes the toolpaths were sweet!
Great work.
The CNC work is absolutely beautiful!
Very good mate
oh my god. He actually segwayed into our heart. the madman.
segwayed into the dms
@@user-hx7dc9uz6s oh frikkin god 😂
Segue *
@@FinPlayz that spelling albeit correct is far worse
Is that a villager from AOE?
Congrats LTT family. I have be a sub since u were at ncix way back in those days. Ur fantastic channel. Keep up the great work and videos
I've been a sub for years and you definitely deserve this. Great job guys and thanks Linus for all the tech tips!
From the crazy bodged water cooling loops in that rented house, to this finely polished computer.
What a transformation haha. Love it!
Oh well im the first reply,it is great!
I'm second lol
Yes I hq been subscribed from then
another verified channel I've never seen before
iu
“Linus: Simple. All you have to do is get 9,999,999 of your friends to subscribe to your channel.”
Me:👁👄👁
Time to start creating alts
How it feel to have him like your comment
Me who has a √-1 friend: 👁️💧👄💧👁️
@@doubledashtwo nice math joke!
@@ChiefYoshi That would take you a really really really really long time, probably going to be easier just to do it the intended way
This is awesome, another thing you can so instead of electrical tape to make the IR read is to use permanent marker which also makes it read correctly. you can also change the emissivity settings of the Flir using the chart included with it.
i watched this a year later, alex's projects have really been the best, cool to see he recently ticked all those projects off too that he originally pitched years ago!
I know I'm just 1 in 10 million, but it feels like I'm part of it. Congrats to Linus and everyone involved, you guys deserve it!
Such a great comment!
turn my mobility scooter into a gaming pc
Well, they’ve done weirder things before, so you have a good chance...
Heck, Linus even put up with TwoMad’s insanity lol
Fucking yes! Also Ricky you're a feckin legend!
That is taking mobile gaming to a new level
Hell yeah
Turn your giant teddy bear into a gaming pc
Absolutely sick build! And well deserved! Here's to 20M
I just realized something .... There is no adds on the video ... Man LTT(everyone in the team) is cool thank you for making these legender videos
You can now tell past Linus that the thousands he spent on CNC machines and stuff for Alex was worth it!
Except they barely used it here lmao
spend thousands on CNC machines and stuff for Alex ... sends out the job to an external firm to do the CNC milling .. ;)
Cnc machining is not 3d cad and print like 3d printer. It's really complicated in reality
Didn't they had to scan a play button by professionals?
@@agnieszkarajder2821 😅
Whenever another one of his channels (Techquickie, Short Circuit, etc.) reaches 10mil subs, the play button should be turned into an external GPU container to work in tandem with this one.
The only issue I see is that the depth of the play button wouldn’t allow for a higher power gpu. Maybe if you had the pcb in the button and a external rad with quick disconnects it would work.
@@corb2193 they could maybe turn it into external storage.
@@corb2193 i mean waterblock, another playbutton for reservoir and another one for rads
@@corb2193 Laptop GPU
@@corb2193 get both of them to 10 mil, then take two diamond play buttons and hollow them out then stick them together to make a double sided diamond play button
congratulations and thanks for all the advice throughout the years
Would love to see a pedastal/external GPU update for this build. Well done!
For some reason I felt so happy for Alex. We don't see compliments too often in these kind of videos, and perhaps they get shout outs IRL a lot that are just cut out, but it's nice to see this bond between them and the positive energy that's always present at LTT.
Yeah Linus is a really good boss who have loyal people around him. They aren't even employees anymore, they have become his friends.
@@mokujin4076 You can make an educated guess by knowing how many people have left the company since its founding. I think it's only two, three people? The rest stayed, like forever.
when a light-up rock runs better than your own gaming pc
That's not poggers
:(
:(
Facts 😔
It s true
Anything runs better than my gaming pc.
Cuz I don’t have one.
3D scanning mirror finished or high gloss if easy enough... just spray it with white tinted zinc oxide primer. Looks like a lightish, matt, grey finish.
Orange works well too.
Black and red kind of suck unless you're scanning on a controlled ambient lighting rig.
I don't know why i enjoyed this so much. They're just unintentionally effortlessly funny together.
Should have found a way to make the “diamond” the power button
was my first thought, ohh diamond power button coool.
It would be sick until someone touches the diamond on your sweet looking Diamond Play Button PC and accidentally turns it off because they didn't realize it was a button.
Yep. That was what i was looking for.
Make the diamond play BUTTON the power BUTTON.
Heck, that would also have been one good excuse of using some RGB-light there (show temps as color for example)
@@FlergerBergitydersh Not an issue since you can configure that within Windows. I usually have mine set to hibernate (and the Luna key on keyboards for standby), but it's possible to set it to "do nothing". Of course, you can still turn off the system by holding it for 4+ seconds then...
I wouldn't expect anything less.
HI
exactly!😂
i expected more why say its a gaming pc when they don’t benchmark games on it.
I loved the video but I think it would be cool with the play button if you get a case and include the play button in it
Who else but linus
Absolutely amazing. Not only are you one of the relatively few who can say they got a 10 mil diamond play button, but you're the only one who can say you've got a PC that uses it as a case. Amazing work and I can't wait to see you reach 100M
Alex’s infamous line: “I just realized something”
For 3D scanning reflective/clear objects such as chrome/glass etc, we use a removable matting spray (available from Aesub or Helling3D) - it covers the entire item in a removable matte film that is water soluble and can simply be rinsed off afterwards :)
Source: I'm a CGI Generalist who uses 3D scanners in my workflow
Wow, I never expected that
We also use this in jewelery and dental quite a bit
An alternative way would be the "traditional" method, using a touch sensor to scan the surface. For those who haven't seen it, it's some sort of "finger" with a ball at the end that moves and detects when it touches a surface.
Aah I was wondering if there was a way to spray it and clean it off, handy to know!
Join corridor digital... They require people like you
RUclips: “You weren’t supposed to do that.”
Also RUclips: "Now everyone's going to want one."
His pfp and what he said are relevant
Take his Diamond Play Button back.
0:57
Jack sucks at life: ARE YOU SURE ABOUT THAT!?
when i do this, i’m just gonna put a raspberry pi in there
When a small, RUclips Play Button pc is more powerful than your home “gaming” tower.
I hate the truth
when you own a diamond play button, everything is powerful
Why you bully me
why are me running? Why!? are me Running?
Hahhahahahgagaga
it's strange how clean and organized the workshop is after binge watching 6 hours of Adam Savage one day builds.
Adams workshop drives me nuts, it looks like a living nightmare
@@UnjustifiedRecsThat sort of chaotic workspace isnt for everyone, its fine if there are 1-2 people using it, but it gets tedious with larger teams
Poor Jamie was driven apoplectic dealing with that
Well it's Adams chaos and he find anything he need but others would go insane trying to find something
@@ravenof1985 ive got my own workshop, id never let it get like that
This is the coolest project I've ever seen anyone do with a play button
Definitely like seeing the custom pc builds, especially anything sleeper.
Gosh dang that machining footage. Purposefully making the paths more complicated was also an awesome touch.
Max Box Do You Support Ambassador Rights?
U never awsered my question on discord. :-(
@MrUnboxerMan I mean I like seeing RUclipsrs I like in comments of other RUclipsrs I like, so I'm gonna like the comment.
Lmaobox OG fancy seeing u here
Sometimes I miss CNC programming, most of the time I don't miss the crashes/tool setups/fixtures lol
“Yo bro let’s play a game”
“Sure bro, one second let me get my pc”
*pulls out a play button*
@@rudyramirez4335 😐
@@gabbe7769 :/
@@cloud99955 .
@@juliano. 😞
@@gabbe7769 Don’t try calling anyone unfunny when u still think among us memes are funny 😐
0:14 the way when he said this is mfing linust tech tips, he was so happy and meant his words
This is exactly why you do what you do and why you deserve a Diamond Play Button - well done sir, well done
Now this is amazing! Where do I order one?
5 likes on a Alan walker comment lol
big fan bro
Hello there
You can buy it from me for 50 bucks
Woah
Actually thumbs up to Linus who actually risked his play button for making content out of it 👍
He could have it ground down and remelted. Like with the Gold Game Controller. Which I personally think was an expensive test in case they needed a fall back for this project.
with any play buttons you can buy more of them (up to 10) off youtube
@@mikkelbreiler8916it wouldn't be worth much more than scrap metal, even if it did have other minerals. On the controller Gold is worth $1700 per oz. so if it had a couple oz's they could recoup a small fraction of its cost, but would be hard for them to recoup that on one video. (though they might do another or two).
RUclips will send you a replacement if something happens to it but you gotta pay for it. But I hear they're really expensive.
Tip from someone who constantly has to scan reflective and see-through surfaces: mix plaster powder and rubbing alcohol, spread it in a very thin layer on the surface you want to scan. Wait for it to dry (or use a heat gun). Now you have a white, non-reflective surface which you can rinse off with plain water
An actual good idea Bc the stuff hey make the play buttons out conducts heat well. (It cools faster)
Imagine young Linus from 2008 seeing THIS. I don't think, he ever thought that in 13 years he'll become the most known tech youtuber in the whole word. Congrats Linus, keep it up!
I seriously prefer him over mkbhd
i prefer him over any other tech channel.
Bahabbababababhahahahah
@@shiskeyoffles mkbhd is dog shot
@@myboah4764 stop being a weirdo
"That's a nice hole"
*Few seconds later*
"Oh god yeah that's really tight"
"That's what he said."
@@agentt3557 hahahahhhahhahashashsjhdjdkdksosksosjksjskssjsjsjjddjsiwlkwisnskskoqopp ich hab mich grade an die Arbeit gehabt woowpwpwpkdkdkdodkdkdkididididkdnkyowpwpwä
@@momsspaghetti7775 I think, very few people understand german here. =P
@@MrUltranobody True
Linus, those deburring tools are great for 3d prints! super quick clean up of 'elephants foot' and similar artifacts!!!
I realy like ur new intro. I just watched it over and over again before i watched the video
Man that was epic, literally only Linus would do this and that’s the beauty behind it
Truely the tip of tech innovation
Yes. We know.
Never gonna give you up never gonna let you down
hi dark web guy
Yooo deep web dude!
Majority of RUclipsrs: I have a Play Button!
LTT: I’ll play on my Play Button
no
Wait for Davie504 diamond one. Gold was done already.
shame the play button doesn't also act as the power button.
Jack: I have playbuttons!
I mean is it really a play button if you can't even play with it?
concept: get some standoffs and mount it on a wall, run the cables through the wall leading to a usb/aux/hdmi hub at your desk, this would make for an insane wall pc
Coolest build I’ve seen in a long time. Had to like 👍🏼
"he tried his best to make the tool paths complicated so it looks cool"
Flashbacks to when I needed to try and make the tool paths NOT complicated and the computer just didn't want to
lol
Hahaha there are days like that for me too. This was fairly easy.
I love how Linus never really ran out of ideas though the years and still makes great content
Yes!
I know right. Out of all the tech youtubers out there, the only two channels I still watch are LinusTechTips and GamersNexus because every video is creative and supplies with new information I didn't already know. The rest of them kind of got stale and repetitive.
@@theintunity k but what about mkbhd tho
Writers: Yeah. That sounds good.
You do realize that new hardware and new things come to make vids on
Scanning reflective materials like that is really quite simple, you just coat the surface with a paint/dye that won't reflect before you scan it then use a solvent to remove the paint/dye afterwards
If that's not an option then make a mold of the item, use the mold to make a cast out of non-reflective material and 3D scan the cast
congrats on 10m subs! also this is an insane build lol, nice work!
You’re telling me you did not turn the crystal Play logo into the start button?! WHAT
That's what I was also expecting as well.
That’s for the upgrade in a couple years. XD
My first thought - when I saw their approach... i mean, a button on a wire is what i'm doing to my custom pc right now, that's too shabby
tbh before they made a hole for the start button I was thinking "well the only logical place for start button is crystal play logo on top, that's a no brainer"
I was thinking the same, maybe it's too difficult
"Can you appreciate that I did a good job..." 9:09
That reality drama show angle though.
Sweet build guys, I was kinda hoping you were going to use the play button for the power button though. Still turned out awesome!
This is legitimately really fucking cool. Both as an artist and a tech nerd, I am incredibly happy for you.
Connect the Golden Xbox One Controller to it and now you have a vanity emulation station Linus. :)
If I were to guess Ivonne has probably already got the controller melted 🤣
Please do this
Imagine if the power switch was the diamond itself....would've been so damn cool
Yes they could've glued the diamond on top of the button and have a sick ass Power switch
I gotta admit i was kinda disappointed at that.. RGB-enabled YT-Diamond power button is the way to go
69th like LOL!!
For real, instead of a play botton a power button.
RIGHT!?!?!
I like that he didn't go the route other YT users go when getting a diamond play button instead he strayed true to his passion of PCs which IMO says so much more about him than fake platitudes and meaningless thanks
That's a darn nice build, good job yall. Though i hoped the power button would be the diamond in the middle, that would've been awesome :)
they missed a MASSIVE opportunity for making that diamond the power button
yeah but i'd imagine that would pretty hard to implement seeing as tight-packed as it is
They surely already have thought about that however as others said, it will be hard considering it's tight and small
* the play button
it will be hard as the jewel should not be having that rgb if it is a button in case
I don't care how hard it is. Great things don't happen without a challenge.
thats some diamond level performance right there
Theres the joke I should steal
I hate you. take my like.
Diamonds are the most common gem stones in existence. Not a good comparison.
GirlAsianWed.Men
This is so LTT. Congrats on the 10 mil. Well deserved.
FYI if you ever need really shiny aluminum look into truck polishing products. I've seen mirror finish on many different components including grille guards
Sometimes I wonder about state of mind of lawyers:
- "I wont give you a copy of this thing we have"
- "Then we will make a copy ourselves"
- "That's fine, as long as you don't have it from us"
Thats how the law actually works. If you give it, you also implicitly give a right to it. If others copy it, you dont.
American law is ridiculous can't really blame them. One time a guy read a Dr seuss book to extend a speech
@@zaidlacksalastname4905 they have the right to it bro... They can do whatever they want it's there they own it they can do what ever they want lmak
@@sushi.06 no they mean the right to use the design. Like if LMG started selling diamond play buttons right now then Google could and probably would sue them. Just because they have a model that would theoretically allow them to manufacture a diamond play button they don't have the right to do so. If google gave them a CAD model that could be considered google giving them the right to manufacture more of them. The law is fucking stupid like that.
@@zaidlacksalastname4905 Ted Cruz - Green Eggs and Ham
16:55 you know it's serious when Linus didn't segway into the sponsor
Edit: segue*
Use code OJ
Orange juice?!?!
i knew when i saw dbrand linus face case , i knew oj is fan if linus
segue* :) Segway is the personal electric vehicle brand haha
In this context, its segue
A segway is that demonic 2 wheeled contraption
I used to make the same mistake don't worry
hey Linus if u need to thermal camera stuff I found sticking a thermal pad is better than tape because it picks up heat better so its more accurate And it doesn't leave a sticky residue that's annoying to remove
Definitely the coolest play button video I have ever seen.
"Can you please just appreciate that I did a good job and I probably don't need it?"
I felt that
Why does this feel like getting a good grade in high school?
For Linus and anyone else that might be wondering, how you 3D scan something reflective, such as polished metal, the scanners use a bunch of little needles that measure dimensions. We have some at my current workplace. Keyence is the brand, though I warn you, they're not cheap haha. That's why the scan looks a little rough, as you can only fit so many needles next to each other. It's similar to those toys you used to find in stores that you could place your hand in and the pins made the shape of your hand. Take a lot of depth measurements close together and integrate basically and then you have a 3D model.
Can also be done using sprays such as graphite and talc, and then scanning with a laser scanner and cleaned after using an ultrasonic cleaner. It is made to sound way more complicated in this video then it really is. I have scanned many, much more complex items, which are glass with a phone app and powder technique. Specs are usually within 0.5% of the actual object and for a project such as this it would do just fine, but bravo to LTT team for the 10 million subs and for putting this diamond play button to good use. Would have just sat collecting dust otherwise.
wierd flex but ok??
@@GamesForNoobs weird
@@GamesForNoobs what a bum ass comment
For this shape, plaster mold.
15:29 Was about to skip the shit out of the adds, like all of us always do. Then I heard you sincerely thank your viewers. You're welcome Linus. Good work building your empire of knowledge and entertainment!
Holy snit-shacks!!!! Mind bending! Damn near busted the mouse thumbing this up. Will it have like a machined aluminum foot on it to prevent tippage while gaming, or is it just real solid & tip resistant as it sits?
This build is absolutely spectacular other than trying to solder to aluminium :P Any chance I could... borrow the scan mesh? pls
I see more gaming play buttons in the future
Second
mans bouta print himself a resin play button lol
Publishing the files would be awesome!
@@LinkerHoden69 depends if the designs are patented or anything like that. if they did publish them you can bet RUclips's lawyers will send a cease and desist. should he decide not to take it down they may proceed with further legal action. even if they have no rights to bring this to court or try to have it taken down odds are they would give him hell for as long as they can doing everything including potential demonetisation suspension of his account and many other things they do to people they don't like regularly. in other words his channel would be treated the same as a conservative channel without the need for politics and there's nothing anyone can do about it. they would effectively try to ruin his life all to release a simple file. RUclips is a business with no morals its important to remember that on this platform you have no rights and even if they somehow violate your rights they have the kind of money that can make you and any problems you bring them go away for good.
Damn, Alex' toolsmanship really improved since the old "diwhy" videos.
They have a much more complete workshop now too.
Yeah, the shit they're able to do is amazing.
Alex actually rules LTT. He is so great in creating things.[/engineer as well]
7:30 one think that suddenly come to my mind is cover it up with a non reflective material and scan it. You get your shape
I would've just try to put my mac mini inside it if I have one. That looks so well done
I think youtube should give you a special button just because of this
The diamond play button is already special
@@starshapedstar2841 The external GPU needs a custom case too.
@@gutterg0d 100%
@Neraidoh right
That would be expensive as fuck but ok
It would've been so cool if you used the play icon on the center as a power button but it's already a hard build as it is lmao
ala Apple G4 Cube! What an missed opportunity. Still sick build though.
@@Bluth53 definitely not a missed opportunity, that would be terrible lmao.
@@txq2270 To bring a finger close to the Diamond and by doing so to start the PC, you'll have to explain how that's terrible! 🙃
My thoughts exactly
@@Bluth53 oh i thought u wanted to put a apple computer inside it, to be fair, you said nothing abt a button, maybe you should proofread ur self.
"Alex did this project entirely unsupervised"
So 50/50 chance of him completing the project or setting the whole building to sub-zero to improve cooling
I keep this my video in watch later 😜, I just watch it today. Congratulations guys 😁
alex is really knocking every project out of the park, well done!
@Souless Reaper 70 good hes not an employee then
As someone who works professionally in the electronics industry i found myself pulling the same faces that Linus pulls while he watches someone assembling a PC for the first time, while watching him solder those heat pipes. Great effort Linus, even if i was cringing ;)
Did he do something wrong?
@@BadgerStyler not enough solder paste, there seemed to be a lot of voids between the radius of the pipes and the square edges of the heatspreader.
a better idea would have been to fill the slots completely with paste, melt it, then push the pipes into it, displacing the excess
@@ravenof1985 Alright, thanks. Hey, at least it worked though
And you can't even solder to aluminum under 300 °C and without the proper solder. I think he isn't soldered it, it's just stuck in place.
@@suruadamable You absolutely can solder to aluminium without using high temperatures, but the oxide layer needs to be etched first with an aluminium-specific flux. The reason why the joint is patchy is because they "roughed it up" after the first failed attempt. That probably removed some of the oxide, so the solder flowed onto and stuck to some spots, but not others.
Just Amazing! RUclips will be proud after seeing this play button PC.
That's VERY very very cool. I like it!
Geeez... that RGB behind the diamond is pretty SWEEET 😎🤘
big heads
@@Zazedka2 go away
@@Zazedka2 what does a down vote get me, lol
Thanks
@@Zazedka2 why the hell would I want minus years for my mother you numbnut
"Its kind of lubey"
"It goes in easier"
"ahh balls"
"Put it wherever we want because the hole isn't drilled yet"
"That's a nice hole"
"Wow that's really tight"
Are you sure Onlyfans was just for April Fools?
hahahahaha
😆😂🤣
Ahahahahaha.
“It’s way deeper than what I thought it was”
"It's deeper than I thought it would be." -Linus on his honeymoon with Yvonne
Anytime Linus your super keep on teching
My first experience with a de-burring tool in the 1980's was to just use a drill bit that's bigger than the drill bit you used to drill the holes ... Gets rid of the burrs nicely ...