Impeccable timing for releasing this video, Aaron! I literally received my Motorola C117 and Sysmocom serial cable in the mail today! I look forward to playing around with osmocom-bb and calypsoBTS. Keep up the good work, mate!
I’ve been slowly messing with updating the scripts and lining it all up with the software that’s in DragonOS. Last couple pieces was converting some stuff from python2 to 3. Surprisingly what I’ve shown thus far works. I actually have a couple phones and really need to test running them both for the additional time slot to make calls instead of just sms. Pay close attention to the manual settings in the AutoCalypsoBTS to set it for your hardware. Like I mentioned, you do have to have an existing gsm tower for CalypsoBTS.
@@cemaxecuter7783 I'm in Australia, so we turned off all of our 2G networks back in 2018. I do have YateBTS and a BladeRF for CalypsoBTS to sync to though! If all is well with the single telephone, I will buy a second serial cable and another calyspo phone for making voice calls with two timeslots. Fun times. Thanks for everything you do, Aaron!
Holy shit- blast from the past man, awesome. I still have a box full of C115’s/C155’s/C139’s/C118’s. A couple of them with failed 0805 filter / capacitor replacements and nasty bodges to open foreign UE’s to expanded “capabilities”. Lots of rigged up USB serial adapters. I had a lot of fun back then.
Hello again Aaron. Just wondering how you solved the problem with the cross-compiler? I am trying to compile the osmocom-bb Sylvain/Burst_Ind branch and always have to compile with "make NOFIRMWARE" otherwise it fails :( Thanks again, Aaron!
You’ll probably have to build the firmware for that on say 20.04 w/ gcc downgraded. That’s how I did it originally. Funny you ask this, I was just trying to build the TRX branch for the pi.
Im also having the c118 and calypsobts is running ok but the autobts when i press trx1 then nothing happens and in the terminal there is 'sudo: gnome-terminal: command not found'. Do you know what the problem could be?
That’s a different topic, and outside of a educational lab setup (something frowned on by RUclips etc - understandably so). But there’s many articles and good information on osmcombb to help learn more and answer that question I think.
Impeccable timing for releasing this video, Aaron! I literally received my Motorola C117 and Sysmocom serial cable in the mail today! I look forward to playing around with osmocom-bb and calypsoBTS. Keep up the good work, mate!
I’ve been slowly messing with updating the scripts and lining it all up with the software that’s in DragonOS. Last couple pieces was converting some stuff from python2 to 3. Surprisingly what I’ve shown thus far works. I actually have a couple phones and really need to test running them both for the additional time slot to make calls instead of just sms. Pay close attention to the manual settings in the AutoCalypsoBTS to set it for your hardware. Like I mentioned, you do have to have an existing gsm tower for CalypsoBTS.
@@cemaxecuter7783 I'm in Australia, so we turned off all of our 2G networks back in 2018. I do have YateBTS and a BladeRF for CalypsoBTS to sync to though! If all is well with the single telephone, I will buy a second serial cable and another calyspo phone for making voice calls with two timeslots. Fun times. Thanks for everything you do, Aaron!
Holy shit- blast from the past man, awesome.
I still have a box full of C115’s/C155’s/C139’s/C118’s. A couple of them with failed 0805 filter / capacitor replacements and nasty bodges to open foreign UE’s to expanded “capabilities”. Lots of rigged up USB serial adapters. I had a lot of fun back then.
Hello again Aaron. Just wondering how you solved the problem with the cross-compiler? I am trying to compile the osmocom-bb Sylvain/Burst_Ind branch and always have to compile with "make NOFIRMWARE" otherwise it fails :( Thanks again, Aaron!
You’ll probably have to build the firmware for that on say 20.04 w/ gcc downgraded. That’s how I did it originally. Funny you ask this, I was just trying to build the TRX branch for the pi.
So to intercept only sms 2g you need online motorola c118 no somthing else ? You just put c118 in your computer ?
There’s a cable to connect the phone and then of course all the software and techniques required (I’m not familiar with the sms part)
Im also having the c118 and calypsobts is running ok but the autobts when i press trx1 then nothing happens and in the terminal there is 'sudo: gnome-terminal: command not found'. Do you know what the problem could be?
I’ll have to check the video again, I recall running an install script I thought. Sudo apt install gnome-terminal may clear up what you’re seeing
@@cemaxecuter7783 Sudo apt install gnome-terminal did the job now it works
@@cemaxecuter7783 hi so the problem is you have to have a neck at 1003
When the extension is a letter and not a number, and SMS sending fails, how should I resolve this issue?
I’m not sure about that - I’ve only used numbers.
@@cemaxecuter7783 can you help me
@@cemaxecuter7783 can you help me?
@@cemaxecuter7783 can you help me?
So when I tap the power button it shows me an error I tried everything but it still the same problem even when I try it in Ubuntu
This is on the Calypso phone? There’s some models that have different versions that do not work, I have. Which one do you have?
@@cemaxecuter7783 I do have new c118 and c115 and c139
Hmm what’s the error? It’s not taking the firmware?
@@cemaxecuter7783 when I press the button it doesn't flash and the layer23 it's not showing on the phone
Do you have telegram or any thing I can show you in?
Why I can't receive incoming call and sms from real cell tower
That’s a different topic, and outside of a educational lab setup (something frowned on by RUclips etc - understandably so). But there’s many articles and good information on osmcombb to help learn more and answer that question I think.
@@cemaxecuter7783 OK 🙏
Hello, can I do this on kali linox or do I need DragonOs??
If you built it and made it all work on kali, probably. I’ve only built and tested it specifically on DragonOS.
How to hear 4g calls is this possible?
Probably not, for sure not with this.
Please, put in DragonOS FocalX package ShinySDR again
Unfortunately, It’s not been updated for Gnuradio 3.10 :(
It is possible to get sms using hackrf
Hi don't forget the video that I asked for in my email please concerning the taking of images of a place thank you again for you are very good video
sir yatebts configure
bladeRFxA9 configure
Hello sir
How to capture GSM signal
Your video is very wonderful
Thank you. Grgsm has tools to capture.
❤🎉
make a video for hackrf fake bts server
Can I send a message into your Twitter??