hey man...great video...I would glue only a few parts...#6 screw would work...you may want to dismantle and store away...abs as Anthony Van Riper said...mark them after alignment...hats off to larry...LOL an old song...cheers...!!!
I would like to give a little input on this, if you were to make front (10" pieces) out of two different pieces were one pieces slides into the other. This would allow you to adjust the length to use on different length rods. Just have to drill few hole from side to side insert a small bolt. Wish you all tight line and full buckets.
+The Fishing Doctors Adventures I didn't film it actually catching fish, but it did work on Perch. I only used them (made 5) 1 time this year. It seemed to have a hard time with the really light hits, so I adjusted the sensitivity throughout the day. Worked well on the few Perch over 10 inches, it was the 5-8" that I could see twitching the line without setting it off.
The Fishing Doctors Adventures you can adjust the sensitivity by adjusting the wire that holds the eye of your pole. adding degrees to past 90 will make it ultra sensitive for light bites like finniky trout. I tested all of this for quite a long while and its great now
hey man...great video...I would glue only a few parts...#6 screw would work...you may want to dismantle and store away...abs as Anthony Van Riper said...mark them after alignment...hats off to larry...LOL an old song...cheers...!!!
Made it and it works great
awesome video!! thank you! going to build some before ice this year!!!
might be helpful to maybe mark the joints with a line for when you reassemble for gluing!
made a similar version, works just fine. got my first channel cat on it threw the ice, no joke.
Can you send a pic of how bend the wire
I made one... I call it the Lip Ripper 😂😂😂 and it works 👍👍👈
I would like to give a little input on this, if you were to make front (10" pieces) out of two different pieces were one pieces slides into the other. This would allow you to adjust the length to use on different length rods. Just have to drill few hole from side to side insert a small bolt. Wish you all tight line and full buckets.
Makes me crazy when I see people drilling things in their hands.
Is it possible to use with small fish (100 gm )?
Do you have a video of it catching fish?
+The Fishing Doctors Adventures
I didn't film it actually catching fish, but it did work on Perch. I only used them (made 5) 1 time this year. It seemed to have a hard time with the really light hits, so I adjusted the sensitivity throughout the day. Worked well on the few Perch over 10 inches, it was the 5-8" that I could see twitching the line without setting it off.
Thanks for the reply!
The Fishing Doctors Adventures you can adjust the sensitivity by adjusting the wire that holds the eye of your pole. adding degrees to past 90 will make it ultra sensitive for light bites like finniky trout. I tested all of this for quite a long while and its great now
It would be nice if the video started with a "Working Jaw Jacker" so we know what the video is about...?