When boosting new sheet do you take protective film off the rubber during boosting? I have heard the plastic film can prevent sheet from expanding hence needs to be taken off prior to boosting.
Mate that blade looks like a viscaria with stiga infinity vps handle? Your setup is the same as that of FZD. The boosting and gluing process was spot on and very helpful too. Thank you
@@freeekychakra the stiga fl master handle give you a better grab. Because is more narrow compare to butterfly. So you have a better forehand. Said from the first part of the video when he review the blade. This is a 4 part video from a chinese vloger.
Bro, can you try it on actual play qith your blade and rubber with boosting. Hoping with your next review you read my comment. By the way im one of your viewers. Im Jez from philippines. And ask what is glue is the first coat you apply? And how is it result. Thanks👍👏👏🏓🏓
It can make the sponge expand, obtain better elasticity and reduce hardness. The hurricane without this expansion oil is very hard to use. In China, players who use hurricane need to brush the expansion oil
so this is a video from a chinese vloger, he sell table tennis equipment, glue and cut table tennis for people. This is a blade send by one of his follower, he change the viscaria handle to a infinity vps v handle due to this customer is a big fans of Fan Zhendong. He want the same setting as him. So the from is blue national hurricane 3 and back hand is butterfly dignics 05. The first layer glue he apply to the rubber is a dhs water base glue to protect the rubber from boosting, then he apply 3 layer of boosting oil due to this customer's request, he finish with another layer of water base glue to finish with the rubber. Then he apply one layer of speed glue to the blade to prevent the water base glue tear some of the wood from the blade. How do i know all that? I watch all the video about this blade from bilibili.
So that glue doesn't go too much down the sponge.. it's ok if you don't put glue but the rubber will start to tear after few months ..which is ok if you have money 🤑
When boosting new sheet do you take protective film off the rubber during boosting? I have heard the plastic film can prevent sheet from expanding hence needs to be taken off prior to boosting.
Thank you for this lost pearl.
Mate that blade looks like a viscaria with stiga infinity vps handle? Your setup is the same as that of FZD.
The boosting and gluing process was spot on and very helpful too. Thank you
How is the blade compared to a regular Viscaria?
@@freeekychakra pretty sue it's the same. the handle is just different
@@freeekychakra the stiga fl master handle give you a better grab. Because is more narrow compare to butterfly. So you have a better forehand. Said from the first part of the video when he review the blade. This is a 4 part video from a chinese vloger.
Bro, can you try it on actual play qith your blade and rubber with boosting. Hoping with your next review you read my comment. By the way im one of your viewers. Im Jez from philippines. And ask what is glue is the first coat you apply? And how is it result. Thanks👍👏👏🏓🏓
I'm new to your channel,what is this rubber tuning for?
H3 Nat.
It can make the sponge expand, obtain better elasticity and reduce hardness. The hurricane without this expansion oil is very hard to use. In China, players who use hurricane need to brush the expansion oil
FZD viscaria?
Rare to see , viscaria with stiga handle
Bro, your blade looks like Fan zhedong (STIGA INFINITY is that right? And what is your Rubber in backhand? Thanks🏓🏓
so this is a video from a chinese vloger, he sell table tennis equipment, glue and cut table tennis for people. This is a blade send by one of his follower, he change the viscaria handle to a infinity vps v handle due to this customer is a big fans of Fan Zhendong. He want the same setting as him. So the from is blue national hurricane 3 and back hand is butterfly dignics 05. The first layer glue he apply to the rubber is a dhs water base glue to protect the rubber from boosting, then he apply 3 layer of boosting oil due to this customer's request, he finish with another layer of water base glue to finish with the rubber. Then he apply one layer of speed glue to the blade to prevent the water base glue tear some of the wood from the blade. How do i know all that? I watch all the video about this blade from bilibili.
The glue blocks the booster from soaking in. This looks wrong to me.
What glue you used?
Pretty sure is dhs water base glue
Why the first coat is glue? Why not just booster
the first layer is to protect sponge, you have to put first layer
So that glue doesn't go too much down the sponge.. it's ok if you don't put glue but the rubber will start to tear after few months ..which is ok if you have money 🤑
интересно, клей, а потом бустер?
это кто же такое придумал, сказочники ?)
Bro atleast say the credit u steal it