@@CarsonMcCracken i think i understand you, being that as long as you're not breaking the plane of how the robot already started it is not considered expanding then id agree
Is that within the 6 inch expansion? I would keep that in mind since it looks like it expands pretty far, the rule is that you can only expand 6 inches on the front and back (combined) and the same for left and right (combined)
Only by an inch and a half. I recommend using some CAD to design the geometry to make it in size. We just winged it and didn’t have time to make it all the way in size.
The geometry was just a lil off, we don’t cad for these builds in 24 hrs so we just winged it and it ended up being 2 inches too long. Can be done tho with the right geometry
Low key goated idea
Most creative bot design i've seen yet 🙌 Chain bar lifts gonna be op this season
good concept! just keep in mind that expansion is only allowed in one direction and cant switch to a different side
There’s some ways around that…
@@matthewpreis8613 my understanding is that they measure to make sure your robot can only expand in one direction during tech inspection
It starts at full extension on the one side already. So it is not expanding on more than one side…
There is vertical expansion and a horizontal expansion so in my interpretation it is legal. Not on the size though
@@CarsonMcCracken i think i understand you, being that as long as you're not breaking the plane of how the robot already started it is not considered expanding then id agree
Is that within the 6 inch expansion? I would keep that in mind since it looks like it expands pretty far, the rule is that you can only expand 6 inches on the front and back (combined) and the same for left and right (combined)
I am competing in this competition any bot ideas
super interesting
cool concept 🔥
That's a bit more than 6" expansion
There’s some ways around it… this is still about an inch and half too long tho
Best robot fr
Sick robot, but respectfully, that can't even drive under the ladder. 💀
What tier climb?
Highest tear babyyyyyyy
Sure, when u pick the robot up to the top. The robot is only a single tier climb.
@@collinwarner8917 🤫🤫🤫
That bot is completely out of compliance.
Only by an inch and a half. I recommend using some CAD to design the geometry to make it in size. We just winged it and didn’t have time to make it all the way in size.
Meta
Sheesh
Wait woahhhhh
This isn't even vexu legal lol
The geometry was just a lil off, we don’t cad for these builds in 24 hrs so we just winged it and it ended up being 2 inches too long. Can be done tho with the right geometry