I have a question. Can set up the loops to punch in according to tempo. That way they are exactly 4 bars, or 2 bars long...meaning if I dont quite time my foot perfectly on a stop say like bar 3 beat 3...how do you make it to where the loop is still a perfect 4 bars. Know what I mean? I am aware of the other method of the loop being just the time when u start and stop the record, but does it do the other way too? Thanks
Hey Logan. So yes, you can do this and set the beat and the bar measurements per loop and per memory. Set the tempo and save that to the memory. Then go into LOOP and then press each loop (track 1-6) in there you will see both ‘Measure’ and ‘Loop sync’. These are the parameters you can use to dictate the length of each loop. That way you know that it’s only going to record for those measures in that specific loop. 👍🏼
Hi JP! Here’s a question: can we do multiple voice canon with this ? (Like Pachelbel’s canon !? with let’s say 16 measures later for the first repetition voice, then another 8 later for the second one) Thank you!
John… great channel! I just found you, and I’m watching all the rc600 videos. Thanks! I’m about to watch this vid now, so it might answer my question, but I’m wondering if there’s a list or video with the guitar modeling info. I.e., acoustic and electric model types (like “electric clean” or “Fender Twin” or “Acoustic”) Thoughts? 😎👍🎸
Your vids are great, so I decided to watch your entire playlist. I'd seen and heard you before, but never had I heard you perform. It was truly a moving and lovely performance, a perfect way to demonstrate the RC600. I'm sure we all appreciate your hard work and passsion.
I just bought the rc600 today. I’ve watched several of your vids, thank you very much for the instruction. I’ve been curious the whole time as to weather or not you could actually sing. Well, you can obviously. I loved your original piece at the beginning. Great job!
Aww thanks 🙏 And yeah.. I have a few albums and singles out. 👍🏻 Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/boss-rc-600-course-page Enjoy.
Just received mine some days ago.... first impression : just breathless about the sound out of it : no loss of input signal quality neither with guitar, nor voice or keys... I would even say that playing a little with EQ from the unit, your sound is crystal clear, sharp, with deep bass... I am using with a VL3X upstream for voice effects.
Nice. Yeah my chain is TC-Helicon Voicelive play acoustic first then into the RC-600 out to PA, which is pretty simple. Yeah the 32-bit floating is a game changer. Did a loop with multiple overdubs and me wailing multiple harmonies and just stopped playing and listened. No distortion, no degradation. Bliss.
May I have a technical answer from you? I play guitar as a one-man-band. Can this device work as a looper and multi-effects? I play songs in single-track mode: verse, chorus, break. Can looper tracks 1,2,3 be assigned to buttons 1,2,3 and FX programs to buttons 4,5,6? For example, 4 = compressor + octaver, 5 = preamp + chorus + reverb, 6 = preamp + distortion_delay + reverb?
Yes is can. in fact it has 3 modes per memory so you have not 9 buttons.. but 27 buttons you can program up either as the system or amazingly, per memory!
@@JohnPaulMusicUK Thanks John Paul! Sorry, but one more question if you don't mind. Is it possible to record midi on a track? For example a patch change, so I can change my synth sound with the pedal. :-)
Kind of - so you can send midi commands in, out & thru the device. You would have to find a way to manipulate one of the Assigns to do what you want. Humm 🤔 wondering if it possible.. not 100% on this..
@@JohnPaulMusicUK In the manual they mention only start and stop commands, so I'm doubting it and sent an e-mail to Roland support. Anyway, big thanks for the reply. Think I will go for the purchase anyway tomorrow, it looks brilliant. And then I'll have to watch some more of your tutorials. Final goal is to replace my Mac with Ableton Live. One of the main challenges will be to send the click to the drummer. Excited 😱
Can I get rid of using a separate guitar multi-effects processor and vocal effects unit? That would be so cool to just take the rc600 on gigs and have the guitar and vocal using the effects in the rc600. I'm sure that's what a lot of us are hoping for. If anyone can show us how it's you, John Paul
Hey Walt. Watch the live stream I did last night. Over 2hrs answering questions about it. ruclips.net/video/x4b-vcPcrts/видео.html There are a LOT of effects and they can all be assigned. There are crazy effects and cab effects and vocal effects. More videos coming about that soon. 👍🏻
Just ordered mine this morning. It'll be here Wednesday. Hoping it has the same functionality as the RC5 and RC500 that I've been sampling. For what the 2 I have cost, the RC 600 is a cost effective upgrade I just hope it's not missing any features I love on my two present units... Thank you for the rundown !!!!!
Love the song at the beginning of the video. You've got a very cool voice to listen to. Appreciate these videos as I am just learning how to loop, and I bought this RC 600 as my first loop machine. Maybe that was a mistake because it is absolutely overwhelming! If you have any other resource suggestions for a brand new beginner like me, I'd love to know about them!
Awesome! Thank you! I Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout And if you want 121 consultation, I do this as well: www.johnpaulmusic.co.uk/coaching-options
One more JP, if you miss the down beat is there a way to have it sinc so you dont have the gap when you play live, so you don't have to start your loop over. Hope that make sense. Thanks again
The only real way is to dictate the number of loops that track is going to have. You can go into the settings under LOOP and REC and there you can tell the RC-600 how many bars that loop is. You can specify differently for all 6 and save that to the memory. Useful when you go straight into Play - Dub cause you can relax and overdub without pedal dancing. 👍🏻
Awesome! Thank you! 🙏 So here’s your homework: It’s the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout And if you want 121 consultation, I do this as well: www.johnpaulmusic.co.uk/coaching-options
hi John, thanks for the videos. I was wondering - is it possible to assign a button to "solo" a track ? As in, when the button is pressed all tracks are muted except for one? thanks
Hey Tom That’s a great question and put simply, no.. put more complicated.. sort of. So you can use an assign to any pedal. Therefore you could assign the solo you want to the track in question and when you press a button, it will stop all 5 other tracks (with 5 assigns) whilst the other one keeps going. Hope that makes sense but a ‘solo’ option would be a great addition.. hopefully a firmware upgrade?
Man you really killed it on that first number 😆. TBH if I was a Boss rep and knew what you'd do with this on your channel any risk I'd consider in lending you this unit, well it would be worth it 😆 Thank you for the crazy breakdown I think you've managed to explain the big picture in a very understandable way.
How are you liking it so far? I think I’d have to run an MC6 or 8 so I don’t have to use the function keys so much.. love the idea of the smaller footprint tho
It’s good. Did you know you can COMPLETELY reprogram what the buttons do.. and you can even do that per memory!! Something that’s a huge jump. Still have love for the HRLB but this thing is so customisable!
@@JohnPaulMusicUK yes I did know about the foot switch reprogramming, didn’t realize it was per memory tho! Definitely super powerful, I dunno I’m pretty set with the HRLB but it’s good to know Boss finally came to the table with something amazing!
Yeah by default, it’s per system but you can do it and change it to per memory so you can have completely different memories with completely different buttons if you want which is really powerful. Yeah the MC8 is gonna be put through it’s paces. Hehe.
Thank you for this! My first question is WHEN WILL I GET MINE!!! lol But seriously, 1) Does this have an effect that helps make the guitar sound like a bass? Does it sound ok? 2) Is there a delete all without using an external controller? 3) Having used it, standing up, do you find the buttons harder to step on while playing? 4) In general just helpful ideas to make playing easy. Thank you!
Hey Johnny 👋 Awww if I could whisk one to you, I would. 1) yes a dedicated Guitar to Bass effect is there - I used that as a vocal effect in the demo. 2) yes - finally a clear all loops! The all start stop has options and one of them is if your hold down, it’s clears all the tracks. 👍🏼 3) The buttons are certainly harder to hit than an RC-300 for example cause of the size but I’m used to switches from using the Headrush Looperboard for years and the RC-500. You can always get something like big button adapters like BareButtons. 👍🏼 4) will show you in the coming videos but seriously having different setups for different things saved to memories is probably my best answer. Adapt it for YOUR setup. It can do SO MUCH!
Awesome video. Great introduction to the RC-600. I saw your Headrush vs RC-600 comparison video and realised how far behind Boss/Roland is with the UI. Because of this, I actually bought the Aeros looper that has a fantastic UI. However, without the Midi Maestro, that looper requires a different operation with more pushbuttons in the 6x6 mode. I also have the TC Helicon Play Acoustic pedal and saw your pedalboard and thought that that may be a small compact option. Then, I saw your Gigcaster 8 video and thought that that could be a real substitute for the Play Acoustic, with many more useful functions. So, I am wondering if combining the Gigcaster 8 with the RC-600 is the utopian solution. Any thoughts?
I don't understand the effects limitation. Is it possible to use 4 input effects on guitar and vocals at the same time? Is it possible to assign 4 vocal effects to a vocal line and 4 guitar effects to a guitar line and play with 8 effects at once?
Hey, sorry I haven’t given your channel much love lately. I’m happy to see you’ve got the 600. I plan on learning everything about it from your videos!! Looking forward to them.
How to connect and assign the volume pedal and the Boss FS-7 Dual Footswitch that can be assigned to change from Verse to Choras and Fill in / or intro drum to change Drum Rhythm ( from Drum A Rhythm to Drum B Rhythm )
GREAT VIDEO THANKS !!!! +How does one over-ride and re-program the default "phones +master out being tied together"? (I prefer to have control of each individually..)
Hi JP. I'm looking to purchase one of these soon. I'm actually interested in the half speed function but I haven't been able to find a video of it in use. Do you have a video that shows it being used? Thanks for your time. Adam
Can the RC600 do loop aging in dub mode (aka cascading or Fripper loops)? I would like to see the "Dub Mode Replace 1" in action if you could fit it in somewhere. Also, can the tracks be totally independent of one another and not sync? Like totally random? Been doing some ambient music and it helps keep it unpredictable and interesting. Thanks for the insight and for doing these videos. Cheers
Hey Rob 👋 So there is no Aging in dub mode. The replace 1 and 2 are there to replace the loop completely. 1 is there to record and replace whilst the original is playing and 2 is there to not play the original track. Secondly, yes. All the loops can be independent and in free mode and have loop sync off.
Great stuff! thanks and quick question is I’m a songwriter and wanted to see if it is possible to create a sequence so if track 1 is verse 2 is chorus etc, can I program a sequence to have i with one press, play intro, verse, chorus verse chorus outro? OR so I need to press each time to change it? The Digitech Trio + has this feature and loved it! thanks JP
If you’re at the point where you need a complete sequence of a song, then is it not better to record the whole song as a single loop and music like a backing track? Just curious as if you’re not going to interrupt that sequence then you are basically playing a backing track. The RC-600 can record upto 1 & 1/2 hours per memory what is the total memory of 13 hours for all 99 memories. Just something to think about as it could be easier if it’s just one or two songs to make them full backing tracks. Hope that helps.
Great video man. I will be watching the rest and ordering mine soon! Once I have it and start playing with it I will give you some questions. Will watch your other videos and play with it first, as I'm sure many questions I'll have you have already addressed.
Certainly. Many questions answered are in the playlist for the RC-600.. and I go even deeper into the RC-600 in my Course which you can find here: www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout
Good afternoon, sir. Thank you for your interesting videos. I would like to use the Boss RC - 600 as a vocal and guitar processor. And a backing tracks player in one enclosure. I don't do looping. So, it is not clear to me exactly if it is possible to assign 4 effects to the vocal line (mono) and another 4 effects to the guitar line (mono). And play and sing with the backing track. And will it be possible to program different guitar and vocal effects into the memory for each backing track. And another question, will it be possible to program 2 buttons to walk up and down through the programmed playlist?
Hi Nerius. To answer your questions, the FX have input FX and Track FX. Input effects are what you affect the guitar and vocals with. Track effects with change the backing track. So for effects to the instruments and vocals, you have a total of 4 you can use together. It is possible to change the buttons to move up and down and yes, you can indeed have different FX for different memories/songs. HOWEVER.. is this the right pedal for you? Are you not looking for a dedicated backing track machine and then have a separate Fx processor? Have a look at the Idoru P-1 backing track unit. idoru.live
@@JohnPaulMusicUK Good evening, thank you for your reply. It is now clear that the Boss RC-600 is definitely not the right choice for me. Thank you for the information about the backing track player. But I'm looking for a device that has guitars, vocal effects + player in one housing, in one box. What do you think, maybe the Headrush Looperboard would be a good choice? ( TC Helicon VL3X - not suitable, I gigged with it for 4 years and it started to malfunction - blue blank screen problem). Headrush Looperboard doesn't have limitations for the internal effects chain?
Great video thanks !! (Question for future video) When u have it set up to play many tracks at once, and U hit "play" at some point 50% or more through the shortest recorded loop, can it be set up to NOT play the second you hit the button but rather to have it play at the end of the shortest loop that is currently playing? (the way a Boomering III phrase sampler can?) or are the only "play" options for it to either start playing (or fading in) the second u hit the play button? Similarly if U hit "record" on a new loop, when you're more than 50% of the way through the shortest loop that is currently playing,, is the only option for it to start recording on a new track the second you hit the record button? or can it be set up to wait to actually start recording until the end of the shortest (currently playing) loop? I'm guessing it's possible in "single" mode(which is of no interest), as I want to do this while many loops are playing simultaneously.. (I could not find this info in the owners manual for the RC600.) Thanks!!!
By default the looper is set to Auto for the record settings. Try changing it to free but with quantise still on. See it that does it? Also you can change the record settings to ‘LOOP END’ or even ‘MEASURE’ and that should take the first (base) loop track. 👍🏻
Are the input FX in parallel or in series?, +if they are in series, is it set up in an intelligent order so the Reverb is always after the delay? or is it set up to where signal hits input FX-A before hitting input FX-B, which is before FX-C, which is before FX-D??
Hey 👋 So in term of sound chain I believe they are setup in serial. Cause if you but fx a on (let’s say a radio) and then fx b (bass) you will get just that. Now you can turn them on/off in serial or have them turn only one at a time so as you turn one on the other turns off. In terms of setup, that’s up to you. 100% up to you and can be different per memory.
I want to know if this new unit tracks well with an external clock over midi. The RC-505 has a feature that did not track well with a BeatStep Pro or the better KeyStep Pro. When you record the first track in the older RC- 505 it picks its own tempo for the rest of the tracks. It almost never matches with the external clock. The way around that was to make a dummy first track on the 505 and then set up the tempo to match on the sequencers. This was a process of using the 505 as the master clock source and creating templates saved in other memory slots. You could have all the effects and everything setup And it worked. It's just a lot of trial and error until you have a matched tempo and clock. I was sort of hoping that these tempo midi clock issues were made to work like a dream. You lose a track if it's a dummy. To know if this works the new unit would allow you to select the tempo, and after the first track is recorded it keeps what you selected. Or it slaves to an external midi clock and keeps the setting for all the tracks. Sorry for the tough question. It's a big deal for those in the Eurorack world that want analog looping in sync with midi sequencers and control voltage based connections. I don't mind menu diving to set up great templates.
Just wondering I’ve got an RC-30 and am waiting til I can get the RC-600. I wanted to ask if it’s worth buying a mixer so I can use it on my RC-30 and then when this comes out is it worth using a mixer with the 600
Thank you for the comprehensive content my friend. I’m not figuring out how to set each track to correspond with the others… for example, if I lay down a 4 measure rhythm on 1, I can’t get the other tracks to operate within those same measures. I hope that made sense. I imagine it’s something quite simple I’m overlooking. Could you please advise. I’m finding myself less tech savvy with each passing day. All the best my friend!
Hey 👋 So you need to have a look at how all the loops are set for recording. Click Loop, Rec and look at quantise to be on. Then look at each track before anything is recorded and see if it is set to free or auto, which is best.. or you can dictate the amount of loops for that memory if you prefer. 👍🏻
@@JohnPaulMusicUK much appreciated my friend. I believe I was missing that second step. I really appreciate you taking the time to respond and will continue to recommend all of my looping contemporaries subscribe to you. Warmest regards!
Great Video! Q1. Do we have vocal harmony on this? Q2. If I want to EQ a Particular Loop track - (like EQ my incoming Percussive Guitar), can I do that with some assignable button? Q3. Do we have some boss tones in this, like basic clean and distortion/high gain (sh*t I am so greedy😄)
Q1. Yes but is either static or via midi. Q2. Yes. You can either reassign one of the 27 buttons (9 x 3modes) or an external. Q3. Yes there are quite a few. 👍🏻
Oh really? Step on that quick. Try Thomann.. they even ship to the US but you might end up with a European plug. Boss RC-600 Loop Station thmn.to/thoprod/529921?partner_id=46515
My question is - how do you assign a control button to change the Input Effects Bank up (then a separate control button could be assigned with Input effects bank down) ? I have only been able to assign input effects bank change to a knob under the screen - which, isn't ideal. Thank you for your lessons.
To do this, go to Menu, Click across one (right), pick Assign, use an assign and turn it on. Pick the pedal you want (source) to use and then pick the target as either IN FX BNK INC/DEC for input fx bank up/down or TRK FX BNK INC/DEC for track fx up and down. Then use a second assign for the DEC or INC which ever you want. Remember to then go into the pedal on the modes (MENU-CTRL/FUNC) and turn off that same pedal from its original job. Alternatively you could do the same with an FS6/7 pedal. Hope that makes sense.
Hi John Paul - I find the RC-600 adds a lot of compression, particularly if one of your tracks has a high volume. For example, I often add percussion to a loop track by banging on my acoustic guitar. I find doing so causes massive compression when I’m then trying to play over the top. My question then is, is it possible to setup a sub output to be a bypass? What I mean is, can I pass the original guitar signal only through a sub out, without any of the loops going through that output. I’m trying to find a way of avoiding that compression. The alternative (that I’ve used before) is to run my mic and guitar into my mixer, then run an Aux Out to the RC pedal, and feed that back into the mixer. This allows me to blend the original mic and guitar sounds with RC loops. I’m just trying to avoid having to use the extra channel on the mixer and do the same thing on the RC.
Hello David. Have a look at your input and output settings as there is a noise suppressor and compressor on each channel both input and output. You might wanna turn the hose off and that will help you but you could keep the compressor on the vocals.
Hi Paul great channel mate. The input thru function< can it be set to individual as in inst input Thru OFF and mic input Thru ON? I like my Guit to go from my HX stomp to PA with a bleed off from the send to feed the looper as I don't need the effects But need the Effects on the vocal mic input, as my TC harmony GXT is a bit limited on Effects if that makes sense, Or any other suggestions for this ? Cheers Ronny.
Yes. You can have it so that the effects only affect the vocal but not the guitar but that is a different setting. Goto FX and change the inputs from all to just the vocals. 👍🏻
Hello. thank you for your great videos. I know how to switch display screens manually. i would love to be able to move from the loop status screen to the effect screen without having to bend down and press the arrow button. i don't see any assigns for this. Any tips?
Hey 👋 So I have been looking into this last night for you and you are right. There is no assign for this and looks like something they don’t include. However, I would advise to maybe reach out to Boss Support and maybe mention it for a future firmware update. That would be really useful. 👍🏻
Thanks for sharing this John. I notice there are no slider controls for track volume anymore. How are track volumes controlled simultaneously during playback? Is this something that can only be done by a MIDI controller? Sorry if this is a rather simple question, I can't seem to find an answer anywhere.
I use a Voicelive 3, and ordered a RC-600 to try. Boss knows guitar FX... How are the vocal Reverbs and Delays? Also, BIG question... is there Vocal harmony? Fixed Key or tracked by guitar input? Thanks! Great channel!
Yo! So yes yes and yes. The reverbs, delays and cab modelling is pretty good. There are vocal harmonies - hybrid, fixed and midi. My best advice is have a look at the parameter guide from pages 36 onwards and there are a LOT of effects to talk about static.roland.com/assets/media/pdf/RC-600_Parameter_eng01_W.pdf Also we did a live stream last night of over 2hrs and we went into the effects - ruclips.net/video/x4b-vcPcrts/видео.html
Yes. Totally. 👍🏻 When you are making the effects, you are on page 2. Hit the left arrow and go to page one and that shows you what is being effected. It’s on ALL by default but you can specifically select an input. This is what I do with the bass effect. I have it for vocals as I can sing the baseline and loop guitar at the same time. 👍🏻
Sounds like Boss still has a bunch of development to do on the firmware. Do you have a video on the current issues? The FB page and reviews at Sweetwater are not good.
Nope. Don’t have a video of the issues.. and they way I loop I have only come across one issue that has already been fixed (which was the intro problem with tracks 2&3 in single mode adding a bar). Not saying there are no other issues.. there are.. I just don’t have them due to how I use the looper.
Great overview! I’m trying to figure out how to assign I puts to certain tracks, but don’t know if it’s possible with the boss. With the head rush, I could have track one only taking input 1, track 2 only taking inputs 2&3 for example. Is that possible on the boss rc600?
Yes it’s 100% possible. Go to the track itself (LOOP > TRK1 ) and right page all the way to the end. There you will see the inputs page for that loop and you can switch them on/off as you want. Pro TIp - once you have done TRK1, just press the LOOP button and your jump to TRK2 without having exit the menu and enter again. Then just continue to press LOOP in that menu and you will cycle through all the Tracks no matter where you are. So much faster. 👍🏼
very interested in the audio routing capability and methods available, I plan on using this with live band, and I would like to send A dedicated click to drummer within the headphone mix while allowing the drummer a dedicated start stop, what is the count in click possible settings (number of bars before loop starts etc)
Hey John. You can certainly do this with a dedicated feed and even use an external pedal like an FS5U to give to the drummer coming from the RC-600 to control the start stop. I’ll dive into the settings about the count in settings. 👍🏼
Hi there 😀, I want to play live too with this machine, I didnt find on the manual a clic routing for the phone output. The drummer in the band wants a clic before the song starts in the headphone... so when the loop is coming in the song, he will be on the right beat. This is the only thing who stop us to buy it 🤷♂️ The voicelive extrem does it, but it s à very complicate machine, we want to replace it. Thanks for the reply
So the information about this is in the parameter guide available on Boss’ site. It doesn’t give you a step by step but shows you what’s possible as there are literally hundreds of combinations. It’s in the routing options. Believe me, this will end up being your bible for the RC-600 - static.roland.com/assets/media/pdf/RC-600_Parameter_eng01_W.pdf
@@JohnPaulMusicUK Thanks JohnPaul, still waiting for my delivery, recently seen some being delivered here in the states. I may use the rhythm import tool to create custom backing drum tracks , after some initial reading of the manual the tool to import custom midi files makes it possible with the wasting of one track for a dedicated click per song/patch. this way i can allow my drummer a stop/start to the one loop track giving him the time to feel the tempo and click off the band.,. my responsibility will be building the loops with my guitar/voc etc, once he sets the time.. no room for error here .. thanks for the guide, been looking for it , exactly what I needed!
@@JohnPaulMusicUK thank you for the reply John ! I download the files alreday but without the machine it s quite difficult But i will get it soon Cheers from france
Hey JP, Thanks for a fantastic and thorough walkthrough! I'm still listening through it with great interest. Thanks in advance for your exploration of USB vendor mode that turns the RC600 into an 8-in/8-out interface. I'm super interested in this, since it seems like it would allow me to stream a multitrack performance straight to my DAW. I checked out the manual and parameter guide, and found the USB switch in the latter manual, but no other information. Is there more information in the manuals? Please do dedicate time to clarifying this feature, and its benefits and limitations. To be able to capture a whole song into a DAW without having to transfer WAV files track by track may tip me over the edge on this beast!
Hi JP, been pulling my hair out trying to record a loop into Logic Pro (one of the reasons I bought it because I thought I could transfer stuff into there and work on it there). Using USB I can manage to create a midi track and hear it but for some reason I can't record anything. Really frustrating. Maybe it's something pretty dumb and simple. I'm not really that knowledgable about Midi stuff.
hiya john paul - sorry to torture you with questions. i managed to get myself an RC 600 (woop woop). jaysus the amount of settings is insane!! my question is an old one, as i believe the boss loop stations have had this function for quite some time, but could never get my head around it. 1/ could you explain the effect that "loop sync" has on each track. what is it syncing to? track one loop recording? or drum track?. when would you recommend switching it on/off? 2/ same question regarding tempo sync. how does it affect the loops and when would you recommend turning it on/off 2/ what does the quantize function do in relation to looping? do you keep it on/off? i've had a few issues with playback timing, when i go to play the recorded loop on say track 2, it doesn't play immediately (blinks green), almost waiting to line up with the already recorded loop. hope that makes sense.
Hey 👋 No probs. So.. 1) loop sync - Specifies whether the beginning of the track 1-6 phrases are aligned for loop playback (ON), or whether they loop-play at the length of their respective phrases (OFF). You might want to turn this off when you are making fluid structures where you want the loops to drift apart like ambient sounds etc 2) Tempo sync - Specifies whether each track plays at its original tempo (the tempo during recording) or at the tempo that is specified in memory - this is linked to the BPM set on your first loop and the Rhythm section. Again - imagine importing a loop and then changing its pitch or timing. You might not want to change things. 3) quantise - this is REALLY useful and to be honest in my option should be ON as standard but it’s off as standard. By having it on, it will quantise all your loops to the first one and derivatives of it. The great thing with it being on is that it’s a bit more forgiving when pressing record and you can press the end before bar 1 beat 1. I would leave it on for my kind of looping. With your issue of timing, go into the loops and into the PLAY section of the settings and see if the loop is set to immediate or loop start. If you have Quantise on and then immediate.. this should make it easier and solve the timing issue. Hope all that helps. 👍🏻
Hi (here's another question for a future video..) Can the INPUT effects be configured so that 1 or 2 input-effects are always "full-on" while another input-effect level is controlled by a rotary knob? (In other words can a rotary knob be assigned to control only ONE effect level, without interfering with other input-effect levels that are also turned on?.) [yes i know u could do this another way by using track effects, but I don't want to do it to a loop, I wanna do it with mic-signal in real-time as it's being played.. THANKS !!!!!!!!!!!!!!!!!!!!!!
Hey 👋 In short - yes. You can use the rotary knobs for quite a few things and assign 4 different things to it - depends on what you want it to do. Failing that you can always use one of the assigns and send it via midi to an external controller. You can have all 8 input and track fx on at the same if you want to as well.
@@JohnPaulMusicUK WOW AWESOME !!!! Somewhere I saw a video that said the problem with the 505 mk2 is that if U R in FX-bank-A, +you switch to FX-B (or C or D), that the problem is "A" will turn off when you switch it to "B"...(or C or D), which bummed me out, but apparently either this is not a limitation of the RC600 OR maybe it is not a limitation if you PROGRAM it(ahead of time)?? because he was using it on the fly when demonstrating that pathetic limitation..
No that is actually correct. So you have 4 input and 4 track effects and banks A-D of each. So you have a total of 8 effects you can switch on at once. If however you move banks then yes, the other bank will switch off. So you cannot have effects from different banks running at the same time.
@@JohnPaulMusicUK So when those 8 FX are "switched on" what that really means is they are READY to play ONE AT A TIME on any particular track or input.. (or SOMETIMES U could also have 2 or 3 or 4 effects FROM THE SAME BANK on at the same time, if you happen to like that [limited] combination of whichever 4 effects are available in each "bank.") Is THAT correct? + if so, is it possible to assign which FX are available in each bank??
Excellent presentation! My question is: (when u have 6 foot-switches dedicated to "play/stop2" on the same mode..) Can U explain all the different ways to "select current track" before+after it's been recorded/played/stopped? Do u really need to waste another valuable foot-switch for that? or are there other ways of "selecting" a "current track" before overdubbing or undo/redo-ing.. ??
It’s up to you. The other way to do it would be maybe have a select current track UP and then you could cycle through them. Genuine question.. Why would you want to select it before recording/undo/redo etc? Just genuinely curious.
@@JohnPaulMusicUK Hi, The short answer is because (with 6 "play/stop2" foot switches on the same mode, I don't have a dedicated "Rec" or "undo/re-do" foot switch for each track. +the reason I'm asking what are all the ways that you can "SELECT current track" is because I'm not sure of ANY of the ways to select a track [other than with a dedicated "select cur-track UP" switch, which I'd rather not use..], Also, I don't have the machine yet, so please explain if I am off track on any assumptions) but my understanding (from watching videos +reading parameter guide) is that If i set up 6 channels on the same mode, the way most people do (with 6 different "rec/play/overdub" foot switches) then I'd have to double click a track (to get a track to stop) +I DON'T want to have to do that cuz (I don't like tap dancing) +if I needed to stop a track immediately after recording it, then the double click could make the timing of stops less precise. So I came up with a way of assigning all vital foot switches on 1 "mode" (without having to flip over into mode 2 or 3) which is (6 foot switches programmed as "play/stop2", 1 foot switch programmed as "rec/play1", 1 foot switch as "cur-trk-stop3", +1 switch as "cur-trk-undo/redo",) this uses up all the foot switches on the tin, but it keeps all 6 tracks in view at the same time +enables all vital (play, stop, +record, functions to happen with just one single click. (+I can use the 2 or 4 external foot switches to switch modes, +do other things if I need to) but WITH THIS CONFIGURATION (my understanding is) when nothing is recorded on a track, I could "select" it by stepping on any of the 6 "play/stop2" foot switches?? (hopefully that is true), THEN, (after all tracks are full, I might be turning some of them off, +then wanting to overdub onto a different one that is still on(+so the track I want to stop or overdub onto, (or undo/redo) at that point may not be selected as the CURRENT track, since it may not be the last button I stepped on), so at that point, I'd need to let the rc600 know WHICH track I want to overdub onto, or stop (or undo/redo.) so I thought there must be ways (other than wasting another valuable external foot switch) to select a track (after they are full..) like maybe playing it for a second +turning it off?? or stopping it for a second +re-starting it? (both of which would be a double tap, but it would STILL be better than any other set-up because it would be a double tap that rarely ever needed to happen, whereas most people have "6-channel on one mode" set-ups that require frequent double taps (EVERY TIME THEY STOP A TRACK.) That was why I'm curious to know what are all the ways of selecting current track?.. Sorry if this was long, but without the details it probably would have led to more confusion. Cheers!
Hi JohnPaul, just wanted to know, if this tool allows you to pre-record instrument tracks (2nd guitar, bass, synth, drums) for a song and save it as 'a song' and then play it back as a "playback band" along with live singing and live guitar playing? Or it is rather on stage live performing tool, where artist records all parts and once the party's over everything gets erased after switching this tool off? Thank you for your answer. Great educational videos!
Hi Stano 👋 So actually it can be either. The 99 memories are exactly to record on the fly or pre-record and save. Or you can record in the moment and then if you don’t save that, it will just forget it when you either switch to a different memory or turn off. It’s a fantastic tool for backing and the great thing is you can separate the tracks (drums, bass etc) onto different ‘loops’ for arrangement. Hope that helps. 👍🏻
thanks a lot for your introduction - that's great! And actually the box with the rc600 just arrived and I'm looking forward to checking it out and make the first steps. Hers's one question before unpacking the new family member. Is it possible to change the memories with the footswitches or does this have to be done only manually with the knob?
@@JohnPaulMusicUK Thank you - that's really easy to configure. But there's another question that makes my head smoking;-) With the previous loop stations (rc50, rc300 and even the rc500) I never had a problem to turn of the sync for several tracks or phrases. So that I can start a loop session without beat (like with drones, monochord, shruti, humming or didgeridoo). And the rest of the tracks is synced so that I can build up loops with a clear beat structure over the drones. When I do this with the rc600 (for example track1-4 sync on, track 5+6 sync off) it is possible to do but the quality of the recorded sound of the tracks without sync - the drones - is bad, distorted in every played cycle. Is there a step missing in the configurarion? Do you have any idea to solve this problem? thanks!
How do you distinguish instrument effects & mic effects? I just want to set it up for effects, and get it to the gig to replace pedals for harmonizer on vocals, and delay/distortion/compression/sustain for guitar. I'll figure out looping later. I'm going to use it to play wav files I've recorded on Garageband/Logic from previous gigs. Any suggestions on those 2 goals?
Hi JP - thanks for all your videos. Very helpful. Question for you: my G2B (or transpose) FX is very muddy and sounds pretty bad for much of the work I am trying to do. I am not going for anything fancy, or fast, Just single note simple-ish bass lines. They sound very washy and inaccurate (and quite sh!t). Any help appreciated. Fender Strat (but have a humbucker guitar too, with the same results, and into guitar amps - Spark, Blues Jnr or an EV PA -all with the same results). Cheers.
Hey Brad. Sorry, I have only just seen this. Have you done the update? there is a mode 1 & 2 for G2B and one is certainly less muddy than the other. Also have a look at this - there is more than one way to get a 'Bass' Sound - ruclips.net/user/shorts45CxFV2EPcE?feature=share
Hi John, thanks for the channel, very helpful. I'm having trouble connecting the rc-600 to my computer. When I change the USB setting it never moves past "CONNECTING", essentially seems to freeze there. I've updated the firmware as per your video. I also made sure to download the latest BOSS TONE STUDIO. I have a show Saturday and am trying to upload some WAVS as a backing to a couple songs, would love a video on that subject to, ways of using it as a backing track.. and perhaps looping on top of that.. Hope to hear from you, thanks, Ash
Hey Ash. That’s no worries. Oooh.. that’s weird. Have a look at the playlist of all the RC-600 videos I have made - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
@@JohnPaulMusicUK thanks for the reply Paul, I’d had a good look, couldn’t find anything on these specifics. However, although the screen stayed on “connecting” , the WAVS did load, so progress! Will keep digging for nuggets on your page, thanks
Hi, really confused about two things. Firstly why are loop lengths different? This is causing us a nightmare when trying to build up layers. The 500 sets the loop length from the first recorded loop. Secondly can you go from record straight into overdub? Otherwise you have to double click each time to go out of record into play then into overdub. Many thanks, Asa
The RC-600 has 6 independent loops like the RC-300 before it. They are independent but you can set them as the same if you wish. Secondly, yes you can. Go to LOOP>REC and look for Loop Sction and change it from REC/PLAY to REC/DUB. 👍🏼 Download the parameter guide to learn more: static.roland.com/assets/media/pdf/RC-600_Parameter_eng01_W.pdf
I would like to know how to let it start immediately recording and looping, cause now I have a delay of 1 or 2 seconds... And thanks! Your video is really helpfull for a complete beginner as I am. 🙂
Hey 👋 Glad I’m helping. You have a delay?! Are you pressing the button at the same time as the beat? Is the timing right on the loop? Have a look at this video - ruclips.net/user/shortsvhSf8SJ3ymg?feature=share
Hi JP, I have a problem that has only been addressed by a few loopers, that's to do with utilising song form, some loopers are just one track, and piled overdubs, then you get the Octatrack that you can arrange a whole song, in parts with 8 individual tracks. The Aeros Looper allows you to partition as well, you have two modes, one where only 2 tracks and 6 parts, or 6 tracks. and 6 parts. This looper looks a bit like Loopy HD, Loopy HD has now been replaced by Loopy Pro of course... the Digitech Trio+ looper has parts, but they just provide piled overdub tracks for 5 parts. What I really want is the ability to play parts, can the Boss RC-600 play parts? could you for instance record 6 tracks, and then move to another 6 slots and the sets would be adjoined?
The only way to do this is to have the different parts pre-saved onto different memories and then move up and down the memories as it plays, which you can do. I have done this. I made a skeleton track for a covers song with he right bpm and rhythm and kit etc then copied that over to the memory next door. Then at home I recorded the bass lines that I needed with the drums on slightly different variations, one for the verse and one for the chorus. Then I could loop and play over the top of these with two dedicated buttons for mem up and me down. Downside - if you loop and then don’t save, you loose what you have recorded / overdubbed. Not ideal but a workaround.
has to be Wav. Best to look at this video for that: ruclips.net/video/OaJ2dJ_phrE/видео.htmlsi=42CKdx-Z24d1qbz0 Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/boss-rc-600-course-page And if you want 121 consultation, I do this as well: www.johnpaulmusic.co.uk/coaching-options
Hi John, thanks a lot for the video, loved it! I have a question: Is it configurable to have 4 independent instruments plugged in if we set the 2 input as mono? Also, on a side note, have you noticed any improvement in the overall recording audio quality from the rc-300? Thanks! :)
Yes and yes. The inputs (and outputs) can be stereo or mono or a mixture. 👍🏻 And yes the looping at 32 float is a big difference when you have lots of loops and especially overdubs going on.. haven’t heard this thing distort and is incredibly clear. 👍🏻
maybe someone asked already and I know they are different beasts at same level but if you had to choose the rc-600 over rc-505 MkII would the "Floor" control win out. Sorry if someone asked already I just about to push button on one and your video(Cool demo BTW) is swaying me towards the 600 -Thanks
I’m gonna ask you one question alan. ‘What do you want it to do?’ If you want to control things with your hands and don’t want 6 loops and constantly need to get to volume control etc.. get the 505mkii If you me hands are busy and you want to control via feet. Get the 600. I know someone who has ordered both and they are going to test them out and just return one. Good idea if you have the money. 😉 A curveball for 505mkii is that you can put a pedal switch and midi with it. But the 600 has that extra loop and more customisation for the pedals. Have a look at the live stream I did yesterday if you want. Over 2hrs of answering questions ruclips.net/video/x4b-vcPcrts/видео.html
@@JohnPaulMusicUK as a lone musician I was intrigued by the 505 but as a guitarist I can’t get around the free hands aspect to control . Thanks for coming back to me . Appreciated
I remember you saying it's adaptable to battery power. So, I bought it. But I don't remember where you said it, and I don't see anything specifically for it. How would you do this?
So you would need a power bank and the right connector giving off the correct voltage - there are a few companies like ripcord and my volts who sell a cable to connect an RC-600 to a USB battery pack. Alternatively, a pedalboard power supply. Some of them are battery powered. 👍🏻
@@JohnPaulMusicUK Thx so much man! I will def look into those here soon. There's one other thing that's stumping me. How do I get the loop to record immediately when I press it at the end of playing the loop? It keeps lagging and screwing up my timing. It's probably trying to sync me up with the red light hits, but I don't want that. Quantize is off. Start mode is immediate. Stop mode is loop (but that's for when i want the loop to stop playing, not for the recording to stop recording) IDK what else to change? Edit: I think I figured out the cause. I have a finger picking progression already recorded. Trying to save that for later. But I guess it makes any additional recordings sync up with it? I don't have the problem if I delete that recording. But I need that for later...
Yes. Maybe… there are some awesome effect s for both your inputs and the track effects as well. There are some really nice tone effects taken from some of Boss’ pedals. Effects video coming…
Haha. Welcome 🙏 Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/boss-rc-600-course-page And if you want 121 consultation, I do this as well: www.johnpaulmusic.co.uk/coaching-options
Hi JohnPaul, thank you so much for your videos, it was a huge help for my looper selection, and I ended up getting it ! should arrive Tuesday, I can't wait ! However I have a little question about the input fx, is it possible to have fx assigned per input ? for exemple a combination of fx for the mic input, another combination for the guitar, and another for a synth ? If so how ? Thank you in advance ! Keep the good content coming !
Hi! Oh that’s great news. So for the Boss RC-600 you can have a total of 16 input FX and 16 Track FX but can only use 4 of each at any one time. It’s 4 banks of 4 FX so you could build effects for each instrument/ input and then cycle through the banks as you use each one. 👍🏻 Hope that helps and check this out for more - ruclips.net/user/shortshZL5lRmdzkY?feature=share
Is there a way to send line level signal (or even instrument level signal) out the headphone jack (so u can use it as a 7th stereo output running to another speaker) ?
@@JohnPaulMusicUK right but can it send out anything louder than "headphone-level" audio signal when U do it? (cuz, unless the speaker has an "Aux-Level" input) u can't plug a headphone level cable into a regular instrument-level or line-level input +have it be audible through a speaker..) Might be cool if they update it to send out line-level or instrument-level signal like the other outputs. but it would be even cooler if they could just add a dimmer switch for those OBNOXIOUS lights..
If you have just recorded something then the dedicated undo/redo button with activate on the last track you did something on.. but.. you can hold the Rec/Play button of that track for undo and redo. That’s the default but you can also change this. 👍🏻
I have the most updated firmware. My inputs one both have stopped working!!! This after saving many songs in memory! My only option is a factory reboot???
Have you muted them anywhere? Check the inputs/ outputs pages on Memory. You can always move the loops off via a computer if beforehand before you have to commit to a factory reboot.
Thanks for thereat video !!! (I figured out how to change the colors of the 9 foot switch lights, but ah...) Do u know if it's possible to change the color of the OUTER circle of "the orb?" I don't want to remove the outer orb, I just want to remove the blue color.. (Bright BLUE [or white] led lights are not just annoying.. they're bad for sleep cycles /endocrine system / +the eyes.)
sort of.. not the colour but you can change what it does which would change the colours.. go to MENU> SETUP and you can change the Loop Indicator and the Orb Indicator as well. But you cant customise the colours.
@@JohnPaulMusicUK yep that's what I already did actually. (The red+green flashing thing is maybe a bit better but still obnoxious, so I just REMOVED the outer orb instead) a band-aid fix for a problem that hopefully they will correct in a future update by adding a dimmer to the lights.. or at least an option for fewer white +blue-based lights.. If U talk to Boss please tell them that we really don't want to have to wear sunglasses while operating this thing..
Yes. You have 4 jacks and 2 xlr’s So you could mic up on the XLR, and then have the option of how you want to use the second XLR input and the 4 Mono jack (2 stereo) inputs. You could have the 2 keyboards in stereo and then the drum pad through the XLR (mic 2) or you could have one of the keyboards and drum pad in mono whilst the other keyboard is in stereo. Up to you. 👍🏻
Howdy! (Question #2 for a future video) Can MONO inputs be programmed to play out just ONE side of a designated "stero-link" output? OR would they HAVE to come out in "dual-mono"? (Yes as u demonstrated, I am aware that u can set the outputs to mono, +do it that way, but that's not what I want to do cuz i need to use the stereo output for another stereo input), Question is can a designated "stereo-link" output, still play Mono signals (coming from a mono input OR from a track loop) on only ONE side of the stereo output?? My hat's off to u if u can figure this one out lol thanks!
Hi. So a mono output with a stereo input. What you would have to do it pan the stereo input all the way to one side (so you don’t loose the right and left parts of the audio) and then you can feed in the stereo track, pan it in the RC600 and then send it out mono. No problem. 👍🏻
@@JohnPaulMusicUK Cool! (that's nice, I can use that sometimes) but that was not what I was asking. I want to know if a mono INPUT can be routed out only 1 side of a stereo output. [example, running XLR inputs in mono, +sending that mono INPUT to a stereo output. Can I still use the stereo effects to pan that mono input to one side? or does it lump the stereo outputs together and force you to use mono INPUTS in "dual-mono"? (I read in the manual somewhere that certain "stereo" effects.. like panning or panning-delay can only be used with "stereo link" enabled, but it did not say if the "stereo link" had to be applied at the input as well as the output, and also did not specify if a TRACK (recorded from a mono input) can still split up the mono signal (+use panning or panning delay) when sending that mono-input'd TRACK, to stereo outputs.. (sorry if this was long lol)
great work john!! very jealous he he. i owned the RC 300, so looking forward to the upgrade. looking forward to your live feed!! 1/ is it possible to record "one shots" on the fly? (not having to pre-record and then enter menu system and tweak button function etc like rc 300) 2/ would love you to demo a verse /chorus /bridge type song - (track one is generic percussion, while other tracks switch between sections) was curious how quick this can be setup before audience loses attention (assuming its a simple chord structure for all parts) 3/ is it possible to select a kick drum only when using the inbuilt drum machine? or are they mostly combined patterns (snare / hi-hat combo/kick etc..) i like using the kick as my tempo and they build up sounds around this. regards john paul mcbride
Hey 👋 1) you can do a bit of both worlds here. So you could pre-set a loop to be a one shot before a gig and save that to a memory without a recording on it. This saves time and just use one of the memories when you know you are going to do it. Other than that, it’s still changing it in the system. 2) Again, I would setup one of the 99 memories to be a verse/chorus/bridge system with other loops as the rhythm. My ideal would be tracks 1,2,3 as rhythm and 4,5,6 as verse/chorus/bridge. 3) yes. All rhythms have pattern parts and with the brand new rhythm maker on pc and Mac, you can even create parts for the verse chorus Bridge with intros and fills etc. very cool.
Thanks for all your videos. Maybe you can help. I’m trying to use track 1 as verse and track 2 as chorus in series mode. Track 3 I want to use as percussion that will go over both verse and chorus. For some reason it always gets out of sync. I’m sure I have a wrong setting on track 3 but I can’t figure out what it is. Any ideas.
Yes. It will be down to how you put each loop down. If you have track three set as multi and the other two set and single, that’s fine but you need to go into LOOP>REC and turn quantise on. That should be it, if not it’ll be down to loop sync. Let me know.
@@JohnPaulMusicUK thanks again. It ended up being loop sync on one of the tracks. One more question. Is there an easy way to assign a pedal to fade out everything?
Much - there is an option you can set for All start/stop to just hold down and clear all loops. Alternatively, the old trick of memory up and down without saving will clear them quick too. That works on the RC300 too btw and I just used to do that. 😂
with the default settings, when i use the half speed switch on a track, it sounds choppy. it sounds like it’s doubling the duration of the track but trying to maintain the same pitch (badly). i just want it to double the duration of the track and lower the pitch an octave (i.e. just play the loop at half the speed), like several other loopers do. are there specific settings i need to change to achieve this?
Yes. Go into LOOP> select the track with that loop on (you’ll have to do this with all 6 tracks if all 6 have audio on) find TEMPO SYNC>MODE and change from the default of XFADE to PITCH. That should do it. 👍🏻 the Press LOOP there and you’ll be on Track 2 and do the same etc. Don’t forget to save to the memory 😊
Hey JP, nice recording and initial demo of this beast! It is very impressive. When I think of workflow with this looper, with so many tracks and tools, I would like to use it in many ways, and I would especially want to be able to transfer the work I put in on this device to a DAW, in my case Ableton Live. In my opinion Boss has decided to stick with a very old and limiting means of transferring files, one by one, each in a separate folder. File naming & transfer is limiting, time consuming and requires paper and pencil tracking even on my Two-track RC 500. Porting over six tracks for each song I happen to create just seems like too much. All of this leads me to be more inclined to simply go to the DAW from the start, for anything over two tracks, skipping the benefits of a hardware looper with more features than the RC 500. I guess I am not so excited by multi track live looping as to be willing to put up with the daunting file transfer process that the RC 600 would require. If Boss had added a file bundling process that would essentially transfer a single zip file of whatever was recorded, with multiple tracks and even perhaps sequences, I would be far more tempted to readjust my workflow to accommodate this otherwise amazing machine. I think the Aeros looper has done more of this, but that looper has limits regarding how well it plays with other midi devices, and I like my Morningstar MC8. All in all, I am a little more inclined to stick with the RC 500 for a while on my live performance board. My simple question is, have you considered this concern? Perhaps your live performance workflow doesn’t need to transfer into the studio, and you re-create everything directly in the studio without needing to transfer many tracks. Anyway, I would be interested in your thoughts.
Hey Adam. Good to hear from you. Yeah it’s something that it’s difficult I suppose but I haven’t yet considered that. Have only just updated the firmware and haven’t played around with the file transfer. It is different cause there are 6 loops, fx, rhythm, 27 button settings, 16 midi assigns and more to contend with for 99 memories. Defiantly reach out to boss and formulate an email about this cause it’s something that will get more and more needed as time goes on.
Hey Dast so there are 2 main options with audio interface. One is ‘generic’ where you get the output of mains of the unit. The other is ‘vendor’ which will interest a lot of people as it turns the unit into an 8-in, 8-out interface. Something I am looking into. If I’m going to live stream, I would just use it as Generic but Vendor is going to be very useful for multi-track performance capture. 👍🏼
Hi Paul, first I want to thank for your clear explaining of the rc 600. ist a big help! But there is still a important question for me, maby you can help me with that. so: I record on a track with the "replace the 2." mode, because I need to play till I find its in groove. so far so good... now, when I recorded it, I listen to the track and want to add a second line on the same track. but here I also want only record the last round. but now it is deleting the first line - but I want to keep it of course ... hope you understand my problem. do you have a solution? Tank you !! best regartds, Chris
Hey Chris 👋 The simplest way is to utilise another track. So have replace the 2 on track 1 and then use another track with the normal overdub. Alternatively, you can use an assign to assign ‘Dub Mode’ as a target to a pedal to change it for the track you want. 👍🏻 Hope that helps? 👍🏻
@@JohnPaulMusicUK Hi Paul, I think the idea to assign a button from replace to overdub is a good way for now ..thank you very much! But somehow it would be cool to have new mode that records in replace mode and when I recode the second time ( also replace ) on the track it simply keeps the one I recorded before .. Maby its an inspiration for the next update! How ever thank you again for your support! best, Chris
Well, Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s I also have a FULL RC-600 course with over 50 unique deep dive videos in, which you won’t see on RUclips, which you can now pay for monthly for! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout
I cant get my rc600 to record the sounds coming from my usb from mainstage . I have downloaded the drivers , set to vendor and usb loop in. I just cant get it to work . Its annoying me now. .Any help would be appreciated
just got mine today, thanks for the help. You might have said it earlier in the video but at 15:42 you have track two running as a quicker loop than track one. How did you make that happen. I counted to four on track one and then went to track two, counted to two and hit "rec/play", thinking that it would just loop that one faster but it didn't do that. Any tips? Edit: I think I figured it out haha
@@JohnPaulMusicUK only thing that’s annoying is that I try to hit track two to line up with track one…then it acts like I didn’t and I have to wait a whole measure to try again, do you know what I mean?
Try and learn to hit it a quarter beat before bar one beat 1… so if you were to could 1&2&3&4& on a 4/4 bar.. I would look at tapping the button anywhere after 4&. Quantise will take care of the rest. Hope that makes sense.
Hi John, thanks for doing these videos! Im planning to buy this awesome machine for my live performances. Please can you tell me if i can use it as an audio interface? How many channels would I have if I use it in this way? Theres a difference of using vendor mode or generic? Im a huge fan of Roland’s products but I found that there’s a lack of information in the manual about usb modes and applications. So i think you’re the only hope to discover that! Thanks!
Hey Rafael.. you are in for a treat! So ‘generic’ mode will send out a stereo feed of the looper. Simple 2 channel Left and Right mix - same mix as the mains. So if you want to live stream.. or just record the output of the looper, that’s what’s generic is for. However, Vendore mode UNLEASHES the looper into an 8in / 8out Audio interface! And however you had the looper routed is mimicked on the usb. Great for multi track recording and getting everything down. And yes it’s 32-bit! Woohoo!!
Thank for the long awaited vid JP. My question (1 of 2 cos I'm greedy!) Does undo reach back more than the last dub? IE - with a loop recorded and dubbed twice, will 2 undo's remove both overdubs? AND Q.2: After a loop is recorded featuring say a vocal and a guitar on one phrase - does the individual routing out still work on the playback? IE channel one = vocal and channel 2 = guitar. Thank you!
Hey 👋 1) undo is normal undo however there is a brand new feature called Mark Back which lets you dictate a point in time, then add more overdubs and then you can go back to that marker and multiple undos can take place. 2) yes the individual routing still applies - so if you record a vocal and guitar on the same loop, you can route the inputs and outputs to different places but I would recommend to do that in a mono state so you can split them. Stereo goes to one output. Hope that makes sense.
Thanks for the great video. I am a live looper and use a rc 300. I use my guitar and korg triton keyboard with a lot of different sounds when I loop so some songs take over a minute and a half to get started which is a little long to me so I was about to buy another rc 300 and sinc them so I can have one looper with preset sounds for my keyboard and digital percussion and then another with my guitar so I can split the signal. I want to make sure with the rc 600 can I input preset sounds and have them come out of a separate channel while I can still loop on top of it with my keyboard and keep my guitar signal separate and still loop with it as well? Hope I worded this right lol. Thanks and looking forward to the next video
Hey Justin. Ahhh i had a triton! Love those sounds. 👍🏼 So yeah you can route out to the main out, sub out 1 & 2 independently if you wish (hope that’s what you mean)
Hi JP. I have the RC505 and would like to connect with the RC600 via MIDI to expand the possibilities in a more complex set. My question is if I can manage to "start/stop all" in both the slave and the master from one device. Thank you.
Hi Paul. Short answer - yes you can. When you connect the two of them together, the start/stop can be controlled with Midi Start/Stop. 👍🏻 Have a look at this - rolandus.zendesk.com/hc/en-us/articles/115002389103-RC-505-HOW-TO-ACTIVATE-MIDI-START-STOP
What's Your Question? Add it as a comment & we'll get it answered - If there are loads of the same question, i'll make a video. 👍
I have a question. Can set up the loops to punch in according to tempo. That way they are exactly 4 bars, or 2 bars long...meaning if I dont quite time my foot perfectly on a stop say like bar 3 beat 3...how do you make it to where the loop is still a perfect 4 bars. Know what I mean? I am aware of the other method of the loop being just the time when u start and stop the record, but does it do the other way too? Thanks
Hey Logan.
So yes, you can do this and set the beat and the bar measurements per loop and per memory.
Set the tempo and save that to the memory.
Then go into LOOP and then press each loop (track 1-6) in there you will see both ‘Measure’ and ‘Loop sync’.
These are the parameters you can use to dictate the length of each loop. That way you know that it’s only going to record for those measures in that specific loop. 👍🏼
Hi JP! Here’s a question: can we do multiple voice canon with this ? (Like Pachelbel’s canon !? with let’s say 16 measures later for the first repetition voice, then another 8 later for the second one) Thank you!
John… great channel! I just found you, and I’m watching all the rc600 videos. Thanks!
I’m about to watch this vid now, so it might answer my question, but I’m wondering if there’s a list or video with the guitar modeling info. I.e., acoustic and electric model types (like “electric clean” or “Fender Twin” or “Acoustic”)
Thoughts?
😎👍🎸
Hey Steve 👋
There are others who have done FX videos and I haven’t done one yet..
watch this space. 👍🏻
Your vids are great, so I decided to watch your entire playlist. I'd seen and heard you before, but never had I heard you perform. It was truly a moving and lovely performance, a perfect way to demonstrate the RC600. I'm sure we all appreciate your hard work and passsion.
Wow, thank you! 🙏
I just bought the rc600 today. I’ve watched several of your vids, thank you very much for the instruction. I’ve been curious the whole time as to weather or not you could actually sing. Well, you can obviously. I loved your original piece at the beginning. Great job!
Aww thanks 🙏
And yeah.. I have a few albums and singles out. 👍🏻
Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/boss-rc-600-course-page
Enjoy.
Just received mine some days ago.... first impression : just breathless about the sound out of it : no loss of input signal quality neither with guitar, nor voice or keys... I would even say that playing a little with EQ from the unit, your sound is crystal clear, sharp, with deep bass... I am using with a VL3X upstream for voice effects.
Nice. Yeah my chain is TC-Helicon Voicelive play acoustic first then into the RC-600 out to PA, which is pretty simple.
Yeah the 32-bit floating is a game changer. Did a loop with multiple overdubs and me wailing multiple harmonies and just stopped playing and listened. No distortion, no degradation. Bliss.
May I have a technical answer from you?
I play guitar as a one-man-band. Can this device work as a looper and multi-effects? I play songs in single-track mode: verse, chorus, break. Can looper tracks 1,2,3 be assigned to buttons 1,2,3 and FX programs to buttons 4,5,6? For example, 4 = compressor + octaver, 5 = preamp + chorus + reverb, 6 = preamp + distortion_delay + reverb?
Yes is can. in fact it has 3 modes per memory so you have not 9 buttons.. but 27 buttons you can program up either as the system or amazingly, per memory!
Thanks!
Welcome 🙏
Here’s the playlist of every video I’ve done so far for the RC-600
Enjoy - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
Awesome! What would be be the best way to go to the next song without interruption please?
Make sure you have something on both memories and then just memory up. It will play flawlessly. 👍🏼
@@JohnPaulMusicUK Thanks John Paul! Sorry, but one more question if you don't mind. Is it possible to record midi on a track? For example a patch change, so I can change my synth sound with the pedal. :-)
Kind of - so you can send midi commands in, out & thru the device. You would have to find a way to manipulate one of the Assigns to do what you want.
Humm 🤔 wondering if it possible..
not 100% on this..
@@JohnPaulMusicUK In the manual they mention only start and stop commands, so I'm doubting it and sent an e-mail to Roland support. Anyway, big thanks for the reply. Think I will go for the purchase anyway tomorrow, it looks brilliant. And then I'll have to watch some more of your tutorials. Final goal is to replace my Mac with Ableton Live. One of the main challenges will be to send the click to the drummer. Excited 😱
Can I get rid of using a separate guitar multi-effects processor and vocal effects unit? That would be so cool to just take the rc600 on gigs and have the guitar and vocal using the effects in the rc600. I'm sure that's what a lot of us are hoping for. If anyone can show us how it's you, John Paul
Hey Walt. Watch the live stream I did last night. Over 2hrs answering questions about it. ruclips.net/video/x4b-vcPcrts/видео.html
There are a LOT of effects and they can all be assigned. There are crazy effects and cab effects and vocal effects. More videos coming about that soon. 👍🏻
@@JohnPaulMusicUK Awesome I’ll be checking out the live stream soon!
Just ordered mine this morning. It'll be here Wednesday. Hoping it has the same functionality as the RC5 and RC500 that I've been sampling.
For what the 2 I have cost, the RC 600 is a cost effective upgrade I just hope it's not missing any features I love on my two present units...
Thank you for the rundown !!!!!
No probs 🙏
Here’s all the videos I’ve done so far for you to binge watch until Wednesday.
ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
Love the song at the beginning of the video. You've got a very cool voice to listen to. Appreciate these videos as I am just learning how to loop, and I bought this RC 600 as my first loop machine. Maybe that was a mistake because it is absolutely overwhelming! If you have any other resource suggestions for a brand new beginner like me, I'd love to know about them!
Awesome! Thank you! I
Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout
And if you want 121 consultation, I do this as well:
www.johnpaulmusic.co.uk/coaching-options
One more JP, if you miss the down beat is there a way to have it sinc so you dont have the gap when you play live, so you don't have to start your loop over. Hope that make sense. Thanks again
The only real way is to dictate the number of loops that track is going to have.
You can go into the settings under LOOP and REC and there you can tell the RC-600 how many bars that loop is. You can specify differently for all 6 and save that to the memory. Useful when you go straight into Play - Dub cause you can relax and overdub without pedal dancing. 👍🏻
Great tuition - thank you. Can you please do a deep dive on how to assign and the assign functions.
Just ordered one today.Wow.The first song,excellent. Thanks,
Awesome! Thank you! 🙏
So here’s your homework: It’s the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout
And if you want 121 consultation, I do this as well:
www.johnpaulmusic.co.uk/coaching-options
hi John, thanks for the videos. I was wondering - is it possible to assign a button to "solo" a track ? As in, when the button is pressed all tracks are muted except for one? thanks
Hey Tom
That’s a great question and put simply, no.. put more complicated.. sort of.
So you can use an assign to any pedal. Therefore you could assign the solo you want to the track in question and when you press a button, it will stop all 5 other tracks (with 5 assigns) whilst the other one keeps going.
Hope that makes sense but a ‘solo’ option would be a great addition.. hopefully a firmware upgrade?
Man you really killed it on that first number 😆. TBH if I was a Boss rep and knew what you'd do with this on your channel any risk I'd consider in lending you this unit, well it would be worth it 😆
Thank you for the crazy breakdown I think you've managed to explain the big picture in a very understandable way.
See you are very kind 🙏
Thanks for watching. If you like what you see, please subscribe, Cheers JP
How are you liking it so far? I think I’d have to run an MC6 or 8 so I don’t have to use the function keys so much.. love the idea of the smaller footprint tho
It’s good. Did you know you can COMPLETELY reprogram what the buttons do.. and you can even do that per memory!! Something that’s a huge jump. Still have love for the HRLB but this thing is so customisable!
@@JohnPaulMusicUK yes I did know about the foot switch reprogramming, didn’t realize it was per memory tho! Definitely super powerful, I dunno I’m pretty set with the HRLB but it’s good to know Boss finally came to the table with something amazing!
Yeah by default, it’s per system but you can do it and change it to per memory so you can have completely different memories with completely different buttons if you want which is really powerful. Yeah the MC8 is gonna be put through it’s paces. Hehe.
Thank you for this!
My first question is WHEN WILL I GET MINE!!! lol
But seriously,
1) Does this have an effect that helps make the guitar sound like a bass? Does it sound ok?
2) Is there a delete all without using an external controller?
3) Having used it, standing up, do you find the buttons harder to step on while playing?
4) In general just helpful ideas to make playing easy.
Thank you!
Hey Johnny 👋
Awww if I could whisk one to you, I would.
1) yes a dedicated Guitar to Bass effect is there - I used that as a vocal effect in the demo.
2) yes - finally a clear all loops! The all start stop has options and one of them is if your hold down, it’s clears all the tracks. 👍🏼
3) The buttons are certainly harder to hit than an RC-300 for example cause of the size but I’m used to switches from using the Headrush Looperboard for years and the RC-500. You can always get something like big button adapters like BareButtons. 👍🏼
4) will show you in the coming videos but seriously having different setups for different things saved to memories is probably my best answer. Adapt it for YOUR setup. It can do SO MUCH!
So looking forward to this video. I preordered weeks ago and am anxiously waiting. 😁 I want that red beauty!
its totally worth the wait!!
Me too!
Awesome video. Great introduction to the RC-600. I saw your Headrush vs RC-600 comparison video and realised how far behind Boss/Roland is with the UI. Because of this, I actually bought the Aeros looper that has a fantastic UI. However, without the Midi Maestro, that looper requires a different operation with more pushbuttons in the 6x6 mode. I also have the TC Helicon Play Acoustic pedal and saw your pedalboard and thought that that may be a small compact option. Then, I saw your Gigcaster 8 video and thought that that could be a real substitute for the Play Acoustic, with many more useful functions. So, I am wondering if combining the Gigcaster 8 with the RC-600 is the utopian solution. Any thoughts?
I don't understand the effects limitation. Is it possible to use 4 input effects on guitar and vocals at the same time? Is it possible to assign 4 vocal effects to a vocal line and 4 guitar effects to a guitar line and play with 8 effects at once?
Hey, sorry I haven’t given your channel much love lately. I’m happy to see you’ve got the 600. I plan on learning everything about it from your videos!! Looking forward to them.
Lots to come.. stay tuned.
How to connect and assign the volume pedal and the Boss FS-7 Dual Footswitch that can be assigned to change from Verse to Choras and Fill in / or intro drum to change Drum Rhythm ( from Drum A Rhythm to Drum B Rhythm )
GREAT VIDEO THANKS !!!! +How does one over-ride and re-program the default "phones +master out being tied together"? (I prefer to have control of each individually..)
MENU>OUTPUT>SETUP. First option. You have the options of ALL (default), MASTER, PHONES or OFF.
Hi JP. I'm looking to purchase one of these soon. I'm actually interested in the half speed function but I haven't been able to find a video of it in use. Do you have a video that shows it being used? Thanks for your time. Adam
Can the RC600 do loop aging in dub mode (aka cascading or Fripper loops)? I would like to see the "Dub Mode Replace 1" in action if you could fit it in somewhere. Also, can the tracks be totally independent of one another and not sync? Like totally random? Been doing some ambient music and it helps keep it unpredictable and interesting. Thanks for the insight and for doing these videos. Cheers
Hey Rob 👋
So there is no Aging in dub mode. The replace 1 and 2 are there to replace the loop completely. 1 is there to record and replace whilst the original is playing and 2 is there to not play the original track.
Secondly, yes. All the loops can be independent and in free mode and have loop sync off.
@@JohnPaulMusicUK I think that the manual says that you can set the decay on the tracks independently. But I would also like to see this demonstrated.
Fantastic demo… Thank you…I don’t suppose it comes with a talent extender?
It sure does! Just once you’ve done 1,000 hours with it, you get one! 😉
Great stuff! thanks and quick question is I’m a songwriter and wanted to see if it is possible to create a sequence so if track 1 is verse 2 is chorus etc, can I program a sequence to have i with one press, play intro, verse, chorus verse chorus outro? OR so I need to press each time to change it? The Digitech Trio + has this feature and loved it! thanks JP
If you’re at the point where you need a complete sequence of a song, then is it not better to record the whole song as a single loop and music like a backing track? Just curious as if you’re not going to interrupt that sequence then you are basically playing a backing track. The RC-600 can record upto 1 & 1/2 hours per memory what is the total memory of 13 hours for all 99 memories.
Just something to think about as it could be easier if it’s just one or two songs to make them full backing tracks.
Hope that helps.
Great video man. I will be watching the rest and ordering mine soon! Once I have it and start playing with it I will give you some questions. Will watch your other videos and play with it first, as I'm sure many questions I'll have you have already addressed.
Certainly. Many questions answered are in the playlist for the RC-600.. and I go even deeper into the RC-600 in my Course which you can find here: www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout
@@JohnPaulMusicUK will definitely check it out. Thanks homie!
Hey ! Can you assign and control the amount of voice reverb with an optional expression pedal ?
Yes.
Good afternoon, sir. Thank you for your interesting videos. I would like to use the Boss RC - 600 as a vocal and guitar processor. And a backing tracks player in one enclosure. I don't do looping. So, it is not clear to me exactly if it is possible to assign 4 effects to the vocal line (mono) and another 4 effects to the guitar line (mono). And play and sing with the backing track.
And will it be possible to program different guitar and vocal effects into the memory for each backing track.
And another question, will it be possible to program 2 buttons to walk up and down through the programmed playlist?
Hi Nerius.
To answer your questions, the FX have input FX and Track FX.
Input effects are what you affect the guitar and vocals with. Track effects with change the backing track.
So for effects to the instruments and vocals, you have a total of 4 you can use together.
It is possible to change the buttons to move up and down and yes, you can indeed have different FX for different memories/songs.
HOWEVER.. is this the right pedal for you? Are you not looking for a dedicated backing track machine and then have a separate Fx processor?
Have a look at the Idoru P-1 backing track unit. idoru.live
@@JohnPaulMusicUK Good evening, thank you for your reply.
It is now clear that the Boss RC-600 is definitely not the right choice for me.
Thank you for the information about the backing track player. But I'm looking for a device that has guitars, vocal effects + player in one housing, in one box. What do you think, maybe the Headrush Looperboard would be a good choice? ( TC Helicon VL3X - not suitable, I gigged with it for 4 years and it started to malfunction - blue blank screen problem).
Headrush Looperboard doesn't have limitations for the internal effects chain?
Great video thanks !! (Question for future video) When u have it set up to play many tracks at once, and U hit "play" at some point 50% or more through the shortest recorded loop, can it be set up to NOT play the second you hit the button but rather to have it play at the end of the shortest loop that is currently playing? (the way a Boomering III phrase sampler can?) or are the only "play" options for it to either start playing (or fading in) the second u hit the play button? Similarly if U hit "record" on a new loop, when you're more than 50% of the way through the shortest loop that is currently playing,, is the only option for it to start recording on a new track the second you hit the record button? or can it be set up to wait to actually start recording until the end of the shortest (currently playing) loop? I'm guessing it's possible in "single" mode(which is of no interest), as I want to do this while many loops are playing simultaneously.. (I could not find this info in the owners manual for the RC600.) Thanks!!!
By default the looper is set to Auto for the record settings. Try changing it to free but with quantise still on.
See it that does it?
Also you can change the record settings to ‘LOOP END’ or even ‘MEASURE’ and that should take the first (base) loop track. 👍🏻
Can you use Ableton as a master clock for this? For instance, can I set the BPM in ableton to 120 and have the RC-600 follow that tempo?
Yes you should be able to do that. 👍🏻
Are the input FX in parallel or in series?, +if they are in series, is it set up in an intelligent order so the Reverb is always after the delay? or is it set up to where signal hits input FX-A before hitting input FX-B, which is before FX-C, which is before FX-D??
Hey 👋
So in term of sound chain I believe they are setup in serial. Cause if you but fx a on (let’s say a radio) and then fx b (bass) you will get just that.
Now you can turn them on/off in serial or have them turn only one at a time so as you turn one on the other turns off.
In terms of setup, that’s up to you. 100% up to you and can be different per memory.
I want to know if this new unit tracks well with an external clock over midi. The RC-505 has a feature that did not track well with a BeatStep Pro or the better KeyStep Pro. When you record the first track in the older RC- 505 it picks its own tempo for the rest of the tracks. It almost never matches with the external clock. The way around that was to make a dummy first track on the 505 and then set up the tempo to match on the sequencers. This was a process of using the 505 as the master clock source and creating templates saved in other memory slots. You could have all the effects and everything setup And it worked. It's just a lot of trial and error until you have a matched tempo and clock. I was sort of hoping that these tempo midi clock issues were made to work like a dream. You lose a track if it's a dummy. To know if this works the new unit would allow you to select the tempo, and after the first track is recorded it keeps what you selected. Or it slaves to an external midi clock and keeps the setting for all the tracks. Sorry for the tough question. It's a big deal for those in the Eurorack world that want analog looping in sync with midi sequencers and control voltage based connections. I don't mind menu diving to set up great templates.
Just wondering I’ve got an RC-30 and am waiting til I can get the RC-600. I wanted to ask if it’s worth buying a mixer so I can use it on my RC-30 and then when this comes out is it worth using a mixer with the 600
Thank you for the comprehensive content my friend. I’m not figuring out how to set each track to correspond with the others… for example, if I lay down a 4 measure rhythm on 1, I can’t get the other tracks to operate within those same measures. I hope that made sense. I imagine it’s something quite simple I’m overlooking. Could you please advise. I’m finding myself less tech savvy with each passing day. All the best my friend!
Hey 👋
So you need to have a look at how all the loops are set for recording.
Click Loop, Rec and look at quantise to be on. Then look at each track before anything is recorded and see if it is set to free or auto, which is best.. or you can dictate the amount of loops for that memory if you prefer. 👍🏻
@@JohnPaulMusicUK much appreciated my friend. I believe I was missing that second step. I really appreciate you taking the time to respond and will continue to recommend all of my looping contemporaries subscribe to you. Warmest regards!
Great Video! Q1. Do we have vocal harmony on this?
Q2. If I want to EQ a Particular Loop track - (like EQ my incoming Percussive Guitar), can I do that with some assignable button?
Q3. Do we have some boss tones in this, like basic clean and distortion/high gain (sh*t I am so greedy😄)
Q1. Yes but is either static or via midi.
Q2. Yes. You can either reassign one of the 27 buttons (9 x 3modes) or an external.
Q3. Yes there are quite a few. 👍🏻
@@JohnPaulMusicUK thnks a lot, I see price going up from $599 to $649 in Sweetwater, need to get this soon 😒
Oh really? Step on that quick.
Try Thomann.. they even ship to the US but you might end up with a European plug.
Boss RC-600 Loop Station
thmn.to/thoprod/529921?partner_id=46515
My question is - how do you assign a control button to change the Input Effects Bank up (then a separate control button could be assigned with Input effects bank down) ? I have only been able to assign input effects bank change to a knob under the screen - which, isn't ideal. Thank you for your lessons.
To do this, go to Menu, Click across one (right), pick Assign, use an assign and turn it on. Pick the pedal you want (source) to use and then pick the target as either IN FX BNK INC/DEC for input fx bank up/down or TRK FX BNK INC/DEC for track fx up and down.
Then use a second assign for the DEC or INC which ever you want.
Remember to then go into the pedal on the modes (MENU-CTRL/FUNC) and turn off that same pedal from its original job.
Alternatively you could do the same with an FS6/7 pedal.
Hope that makes sense.
Hi John Paul - I find the RC-600 adds a lot of compression, particularly if one of your tracks has a high volume. For example, I often add percussion to a loop track by banging on my acoustic guitar. I find doing so causes massive compression when I’m then trying to play over the top. My question then is, is it possible to setup a sub output to be a bypass? What I mean is, can I pass the original guitar signal only through a sub out, without any of the loops going through that output. I’m trying to find a way of avoiding that compression.
The alternative (that I’ve used before) is to run my mic and guitar into my mixer, then run an Aux Out to the RC pedal, and feed that back into the mixer. This allows me to blend the original mic and guitar sounds with RC loops. I’m just trying to avoid having to use the extra channel on the mixer and do the same thing on the RC.
Hello David. Have a look at your input and output settings as there is a noise suppressor and compressor on each channel both input and output.
You might wanna turn the hose off and that will help you but you could keep the compressor on the vocals.
Thanks for the video, can you explain the drum patterns integration
Certainly - there will be a separate video about the rhythm section anyways so stay tuned. 👍🏼
Hi Paul great channel mate. The input thru function< can it be set to individual as in inst input Thru OFF and mic input Thru ON? I like my Guit to go from my HX stomp to PA with a bleed off from the send to feed the looper as I don't need the effects But need the Effects on the vocal mic input, as my TC harmony GXT is a bit limited on Effects if that makes sense, Or any other suggestions for this ? Cheers Ronny.
its ok Sorted it, just turned thru for both on and in 'output routing', switched 'inst to main out left' off. Thanks
Yes. You can have it so that the effects only affect the vocal but not the guitar but that is a different setting. Goto FX and change the inputs from all to just the vocals. 👍🏻
Hello. thank you for your great videos. I know how to switch display screens manually. i would love to be able to move from the loop status screen to the effect screen without having to bend down and press the arrow button. i don't see any assigns for this. Any tips?
Hey 👋
So I have been looking into this last night for you and you are right. There is no assign for this and looks like something they don’t include.
However, I would advise to maybe reach out to Boss Support and maybe mention it for a future firmware update. That would be really useful. 👍🏻
Thanks for sharing this John. I notice there are no slider controls for track volume anymore. How are track volumes controlled simultaneously during playback? Is this something that can only be done by a MIDI controller? Sorry if this is a rather simple question, I can't seem to find an answer anywhere.
Click the enter button from the loop and it’s within the mixer with the 4 control knobs. Nice
I use a Voicelive 3, and ordered a RC-600 to try. Boss knows guitar FX... How are the vocal Reverbs and Delays? Also, BIG question... is there Vocal harmony? Fixed Key or tracked by guitar input? Thanks! Great channel!
Yo!
So yes yes and yes.
The reverbs, delays and cab modelling is pretty good. There are vocal harmonies - hybrid, fixed and midi.
My best advice is have a look at the parameter guide from pages 36 onwards and there are a LOT of effects to talk about static.roland.com/assets/media/pdf/RC-600_Parameter_eng01_W.pdf
Also we did a live stream last night of over 2hrs and we went into the effects - ruclips.net/video/x4b-vcPcrts/видео.html
Hi John, Can you assign different effects for guitar input and vocal input? e,g, vocoder on off on mic and boost on off for guitar input
Yes. Totally. 👍🏻
When you are making the effects, you are on page 2. Hit the left arrow and go to page one and that shows you what is being effected. It’s on ALL by default but you can specifically select an input. This is what I do with the bass effect. I have it for vocals as I can sing the baseline and loop guitar at the same time. 👍🏻
@@JohnPaulMusicUK Thanks very much works well, I am using this with bank change from Holden Bare .thanks to you both.
Sounds like Boss still has a bunch of development to do on the firmware. Do you have a video on the current issues? The FB page and reviews at Sweetwater are not good.
Nope. Don’t have a video of the issues.. and they way I loop I have only come across one issue that has already been fixed (which was the intro problem with tracks 2&3 in single mode adding a bar).
Not saying there are no other issues.. there are.. I just don’t have them due to how I use the looper.
Great overview! I’m trying to figure out how to assign I puts to certain tracks, but don’t know if it’s possible with the boss. With the head rush, I could have track one only taking input 1, track 2 only taking inputs 2&3 for example. Is that possible on the boss rc600?
Yes it’s 100% possible.
Go to the track itself (LOOP > TRK1 ) and right page all the way to the end. There you will see the inputs page for that loop and you can switch them on/off as you want.
Pro TIp - once you have done TRK1, just press the LOOP button and your jump to TRK2 without having exit the menu and enter again. Then just continue to press LOOP in that menu and you will cycle through all the Tracks no matter where you are. So much faster. 👍🏼
@@JohnPaulMusicUK amazing! Thanks. I loop with one other person so this will help to build loops while they solo and visa versa.
very interested in the audio routing capability and methods available, I plan on using this with live band, and I would like to send A dedicated click to drummer within the headphone mix while allowing the drummer a dedicated start stop,
what is the count in click possible settings (number of bars before loop starts etc)
Hey John.
You can certainly do this with a dedicated feed and even use an external pedal like an FS5U to give to the drummer coming from the RC-600 to control the start stop.
I’ll dive into the settings about the count in settings. 👍🏼
Hi there 😀, I want to play live too with this machine, I didnt find on the manual a clic routing for the phone output. The drummer in the band wants a clic before the song starts in the headphone... so when the loop is coming in the song, he will be on the right beat.
This is the only thing who stop us to buy it 🤷♂️
The voicelive extrem does it, but it s à very complicate machine, we want to replace it.
Thanks for the reply
So the information about this is in the parameter guide available on Boss’ site.
It doesn’t give you a step by step but shows you what’s possible as there are literally hundreds of combinations.
It’s in the routing options.
Believe me, this will end up being your bible for the RC-600 - static.roland.com/assets/media/pdf/RC-600_Parameter_eng01_W.pdf
@@JohnPaulMusicUK Thanks JohnPaul, still waiting for my delivery, recently seen some being delivered here in the states. I may use the rhythm import tool to create custom backing drum tracks , after some initial reading of the manual the tool to import custom midi files makes it possible with the wasting of one track for a dedicated click per song/patch. this way i can allow my drummer a stop/start to the one loop track giving him the time to feel the tempo and click off the band.,. my responsibility will be building the loops with my guitar/voc etc, once he sets the time.. no room for error here .. thanks for the guide, been looking for it , exactly what I needed!
@@JohnPaulMusicUK thank you for the reply John ! I download the files alreday but without the machine it s quite difficult
But i will get it soon
Cheers from france
Hey JP, Thanks for a fantastic and thorough walkthrough! I'm still listening through it with great interest. Thanks in advance for your exploration of USB vendor mode that turns the RC600 into an 8-in/8-out interface. I'm super interested in this, since it seems like it would allow me to stream a multitrack performance straight to my DAW. I checked out the manual and parameter guide, and found the USB switch in the latter manual, but no other information. Is there more information in the manuals? Please do dedicate time to clarifying this feature, and its benefits and limitations. To be able to capture a whole song into a DAW without having to transfer WAV files track by track may tip me over the edge on this beast!
Hi, If you save a rhythm to a loop in one of your 99 memories, then can U still record +stack on top of it?
Yes you can always still overdub. 👍🏻
Hi JP, been pulling my hair out trying to record a loop into Logic Pro (one of the reasons I bought it because I thought I could transfer stuff into there and work on it there). Using USB I can manage to create a midi track and hear it but for some reason I can't record anything. Really frustrating. Maybe it's something pretty dumb and simple. I'm not really that knowledgable about Midi stuff.
Hope what I answered I’m the other video solved it for you.
hiya john paul - sorry to torture you with questions. i managed to get myself an RC 600 (woop woop). jaysus the amount of settings is insane!!
my question is an old one, as i believe the boss loop stations have had this function for quite some time, but could never get my head around it.
1/ could you explain the effect that "loop sync" has on each track. what is it syncing to? track one loop recording? or drum track?. when would you recommend switching it on/off?
2/ same question regarding tempo sync. how does it affect the loops and when would you recommend turning it on/off
2/ what does the quantize function do in relation to looping? do you keep it on/off?
i've had a few issues with playback timing, when i go to play the recorded loop on say track 2, it doesn't play immediately (blinks green), almost waiting to line up with the already recorded loop. hope that makes sense.
Hey 👋
No probs.
So..
1) loop sync - Specifies whether the beginning of the track 1-6 phrases are aligned for loop playback (ON), or whether they loop-play at the length of their respective phrases (OFF).
You might want to turn this off when you are making fluid structures where you want the loops to drift apart like ambient sounds etc
2) Tempo sync - Specifies whether each track plays at its original tempo (the tempo during recording) or at the tempo that is specified in memory - this is linked to the BPM set on your first loop and the Rhythm section.
Again - imagine importing a loop and then changing its pitch or timing. You might not want to change things.
3) quantise - this is REALLY useful and to be honest in my option should be ON as standard but it’s off as standard. By having it on, it will quantise all your loops to the first one and derivatives of it. The great thing with it being on is that it’s a bit more forgiving when pressing record and you can press the end before bar 1 beat 1. I would leave it on for my kind of looping.
With your issue of timing, go into the loops and into the PLAY section of the settings and see if the loop is set to immediate or loop start.
If you have Quantise on and then immediate.. this should make it easier and solve the timing issue.
Hope all that helps. 👍🏻
Can you please show/explain your set up? Nice!
Here you go: ruclips.net/video/VE9vLqGX_Gs/видео.htmlsi=74gCbFWiRE2GgPQW
Hi (here's another question for a future video..) Can the INPUT effects be configured so that 1 or 2 input-effects are always "full-on" while another input-effect level is controlled by a rotary knob? (In other words can a rotary knob be assigned to control only ONE effect level, without interfering with other input-effect levels that are also turned on?.) [yes i know u could do this another way by using track effects, but I don't want to do it to a loop, I wanna do it with mic-signal in real-time as it's being played.. THANKS !!!!!!!!!!!!!!!!!!!!!!
Hey 👋
In short - yes. You can use the rotary knobs for quite a few things and assign 4 different things to it - depends on what you want it to do. Failing that you can always use one of the assigns and send it via midi to an external controller.
You can have all 8 input and track fx on at the same if you want to as well.
@@JohnPaulMusicUK WOW AWESOME !!!! Somewhere I saw a video that said the problem with the 505 mk2 is that if U R in FX-bank-A, +you switch to FX-B (or C or D), that the problem is "A" will turn off when you switch it to "B"...(or C or D), which bummed me out, but apparently either this is not a limitation of the RC600 OR maybe it is not a limitation if you PROGRAM it(ahead of time)?? because he was using it on the fly when demonstrating that pathetic limitation..
No that is actually correct.
So you have 4 input and 4 track effects and banks A-D of each. So you have a total of 8 effects you can switch on at once. If however you move banks then yes, the other bank will switch off.
So you cannot have effects from different banks running at the same time.
@@JohnPaulMusicUK So when those 8 FX are "switched on" what that really means is they are READY to play ONE AT A TIME on any particular track or input.. (or SOMETIMES U could also have 2 or 3 or 4 effects FROM THE SAME BANK on at the same time, if you happen to like that [limited] combination of whichever 4 effects are available in each "bank.") Is THAT correct? + if so, is it possible to assign which FX are available in each bank??
Excellent presentation! My question is: (when u have 6 foot-switches dedicated to "play/stop2" on the same mode..) Can U explain all the different ways to "select current track" before+after it's been recorded/played/stopped? Do u really need to waste another valuable foot-switch for that? or are there other ways of "selecting" a "current track" before overdubbing or undo/redo-ing.. ??
It’s up to you.
The other way to do it would be maybe have a select current track UP and then you could cycle through them.
Genuine question.. Why would you want to select it before recording/undo/redo etc? Just genuinely curious.
@@JohnPaulMusicUK Hi, The short answer is because (with 6 "play/stop2" foot switches on the same mode, I don't have a dedicated "Rec" or "undo/re-do" foot switch for each track. +the reason I'm asking what are all the ways that you can "SELECT current track" is because I'm not sure of ANY of the ways to select a track [other than with a dedicated "select cur-track UP" switch, which I'd rather not use..], Also, I don't have the machine yet, so please explain if I am off track on any assumptions) but my understanding (from watching videos +reading parameter guide) is that If i set up 6 channels on the same mode, the way most people do (with 6 different "rec/play/overdub" foot switches) then I'd have to double click a track (to get a track to stop) +I DON'T want to have to do that cuz (I don't like tap dancing) +if I needed to stop a track immediately after recording it, then the double click could make the timing of stops less precise. So I came up with a way of assigning all vital foot switches on 1 "mode" (without having to flip over into mode 2 or 3) which is (6 foot switches programmed as "play/stop2", 1 foot switch programmed as "rec/play1", 1 foot switch as "cur-trk-stop3", +1 switch as "cur-trk-undo/redo",) this uses up all the foot switches on the tin, but it keeps all 6 tracks in view at the same time +enables all vital (play, stop, +record, functions to happen with just one single click. (+I can use the 2 or 4 external foot switches to switch modes, +do other things if I need to) but WITH THIS CONFIGURATION (my understanding is) when nothing is recorded on a track, I could "select" it by stepping on any of the 6 "play/stop2" foot switches?? (hopefully that is true), THEN, (after all tracks are full, I might be turning some of them off, +then wanting to overdub onto a different one that is still on(+so the track I want to stop or overdub onto, (or undo/redo) at that point may not be selected as the CURRENT track, since it may not be the last button I stepped on), so at that point, I'd need to let the rc600 know WHICH track I want to overdub onto, or stop (or undo/redo.) so I thought there must be ways (other than wasting another valuable external foot switch) to select a track (after they are full..) like maybe playing it for a second +turning it off?? or stopping it for a second +re-starting it? (both of which would be a double tap, but it would STILL be better than any other set-up because it would be a double tap that rarely ever needed to happen, whereas most people have "6-channel on one mode" set-ups that require frequent double taps (EVERY TIME THEY STOP A TRACK.) That was why I'm curious to know what are all the ways of selecting current track?.. Sorry if this was long, but without the details it probably would have led to more confusion. Cheers!
Hi JohnPaul, just wanted to know, if this tool allows you to pre-record instrument tracks (2nd guitar, bass, synth, drums) for a song and save it as 'a song' and then play it back as a "playback band" along with live singing and live guitar playing? Or it is rather on stage live performing tool, where artist records all parts and once the party's over everything gets erased after switching this tool off? Thank you for your answer. Great educational videos!
Hi Stano 👋
So actually it can be either.
The 99 memories are exactly to record on the fly or pre-record and save.
Or you can record in the moment and then if you don’t save that, it will just forget it when you either switch to a different memory or turn off.
It’s a fantastic tool for backing and the great thing is you can separate the tracks (drums, bass etc) onto different ‘loops’ for arrangement.
Hope that helps. 👍🏻
@@JohnPaulMusicUK Wonderful, that helps a lot to make the decision to buy it! Thank you very much! 👍🏻🤘
There’s a few links in the description if you wanna pick one up. 👍🏻
thanks a lot for your introduction - that's great! And actually the box with the rc600 just arrived and I'm looking forward to checking it out and make the first steps. Hers's one question before unpacking the new family member. Is it possible to change the memories with the footswitches or does this have to be done only manually with the knob?
Hey 👋
Yeah you can reprogram it to change the memories up and down with the foot switches if you want to. 👍🏻
@@JohnPaulMusicUK Thank you - that's really easy to configure. But there's another question that makes my head smoking;-) With the previous loop stations (rc50, rc300 and even the rc500) I never had a problem to turn of the sync for several tracks or phrases. So that I can start a loop session without beat (like with drones, monochord, shruti, humming or didgeridoo). And the rest of the tracks is synced so that I can build up loops with a clear beat structure over the drones. When I do this with the rc600 (for example track1-4 sync on, track 5+6 sync off) it is possible to do but the quality of the recorded sound of the tracks without sync - the drones - is bad, distorted in every played cycle. Is there a step missing in the configurarion? Do you have any idea to solve this problem? thanks!
How do you distinguish instrument effects & mic effects? I just want to set it up for effects, and get it to the gig to replace pedals for harmonizer on vocals, and delay/distortion/compression/sustain for guitar. I'll figure out looping later. I'm going to use it to play wav files I've recorded on Garageband/Logic from previous gigs. Any suggestions on those 2 goals?
Are the guitar effects any good? Is the guitar to bass effect usable now?
It really is - in fact you just heard it.. but I routed it to my voice instead for the bass on the demo song at the beginning 😉
Hi JP - thanks for all your videos. Very helpful. Question for you: my G2B (or transpose) FX is very muddy and sounds pretty bad for much of the work I am trying to do. I am not going for anything fancy, or fast, Just single note simple-ish bass lines. They sound very washy and inaccurate (and quite sh!t). Any help appreciated. Fender Strat (but have a humbucker guitar too, with the same results, and into guitar amps - Spark, Blues Jnr or an EV PA -all with the same results). Cheers.
Hey Brad. Sorry, I have only just seen this.
Have you done the update? there is a mode 1 & 2 for G2B and one is certainly less muddy than the other. Also have a look at this - there is more than one way to get a 'Bass' Sound - ruclips.net/user/shorts45CxFV2EPcE?feature=share
Hi John, thanks for the channel, very helpful. I'm having trouble connecting the rc-600 to my computer. When I change the USB setting it never moves past "CONNECTING", essentially seems to freeze there. I've updated the firmware as per your video. I also made sure to download the latest BOSS TONE STUDIO. I have a show Saturday and am trying to upload some WAVS as a backing to a couple songs, would love a video on that subject to, ways of using it as a backing track.. and perhaps looping on top of that.. Hope to hear from you, thanks, Ash
Hey Ash. That’s no worries.
Oooh.. that’s weird. Have a look at the playlist of all the RC-600 videos I have made - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
@@JohnPaulMusicUK thanks for the reply Paul, I’d had a good look, couldn’t find anything on these specifics. However, although the screen stayed on “connecting” , the WAVS did load, so progress! Will keep digging for nuggets on your page, thanks
Strange. Glad you were able to get the wavs in. 👍🏻
Hi,
really confused about two things.
Firstly why are loop lengths different? This is causing us a nightmare when trying to build up layers. The 500 sets the loop length from the first recorded loop.
Secondly can you go from record straight into overdub? Otherwise you have to double click each time to go out of record into play then into overdub.
Many thanks, Asa
The RC-600 has 6 independent loops like the RC-300 before it. They are independent but you can set them as the same if you wish.
Secondly, yes you can. Go to LOOP>REC and look for Loop Sction and change it from REC/PLAY to REC/DUB. 👍🏼
Download the parameter guide to learn more: static.roland.com/assets/media/pdf/RC-600_Parameter_eng01_W.pdf
@@JohnPaulMusicUK That’s really helpful John Thankyou!
You are very welcome 🙏
I would like to know how to let it start immediately recording and looping, cause now I have a delay of 1 or 2 seconds... And thanks! Your video is really helpfull for a complete beginner as I am. 🙂
Hey 👋
Glad I’m helping.
You have a delay?! Are you pressing the button at the same time as the beat? Is the timing right on the loop? Have a look at this video - ruclips.net/user/shortsvhSf8SJ3ymg?feature=share
Hi JP, I have a problem that has only been addressed by a few loopers, that's to do with utilising song form, some loopers are just one track, and piled overdubs, then you get the Octatrack that you can arrange a whole song, in parts with 8 individual tracks. The Aeros Looper allows you to partition as well, you have two modes, one where only 2 tracks and 6 parts, or 6 tracks. and 6 parts. This looper looks a bit like Loopy HD, Loopy HD has now been replaced by Loopy Pro of course... the Digitech Trio+ looper has parts, but they just provide piled overdub tracks for 5 parts.
What I really want is the ability to play parts, can the Boss RC-600 play parts? could you for instance record 6 tracks, and then move to another 6 slots and the sets would be adjoined?
The only way to do this is to have the different parts pre-saved onto different memories and then move up and down the memories as it plays, which you can do. I have done this.
I made a skeleton track for a covers song with he right bpm and rhythm and kit etc then copied that over to the memory next door.
Then at home I recorded the bass lines that I needed with the drums on slightly different variations, one for the verse and one for the chorus.
Then I could loop and play over the top of these with two dedicated buttons for mem up and me down.
Downside - if you loop and then don’t save, you loose what you have recorded / overdubbed.
Not ideal but a workaround.
hello and thank you ! what kind of audio files can you upload into the rc-600? thank you
has to be Wav. Best to look at this video for that: ruclips.net/video/OaJ2dJ_phrE/видео.htmlsi=42CKdx-Z24d1qbz0
Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/boss-rc-600-course-page
And if you want 121 consultation, I do this as well: www.johnpaulmusic.co.uk/coaching-options
Hi John, thanks a lot for the video, loved it! I have a question: Is it configurable to have 4 independent instruments plugged in if we set the 2 input as mono? Also, on a side note, have you noticed any improvement in the overall recording audio quality from the rc-300? Thanks! :)
Yes and yes.
The inputs (and outputs) can be stereo or mono or a mixture. 👍🏻
And yes the looping at 32 float is a big difference when you have lots of loops and especially overdubs going on.. haven’t heard this thing distort and is incredibly clear. 👍🏻
@@JohnPaulMusicUK appreciate taking the time to reply, John. Thanks a lot!
Welcome 👍🏻
maybe someone asked already and I know they are different beasts at same level but if you had to choose the rc-600 over rc-505 MkII would the "Floor" control win out. Sorry if someone asked already I just about to push button on one and your video(Cool demo BTW) is swaying me towards the 600 -Thanks
I’m gonna ask you one question alan.
‘What do you want it to do?’
If you want to control things with your hands and don’t want 6 loops and constantly need to get to volume control etc.. get the 505mkii
If you me hands are busy and you want to control via feet. Get the 600.
I know someone who has ordered both and they are going to test them out and just return one. Good idea if you have the money. 😉
A curveball for 505mkii is that you can put a pedal switch and midi with it.
But the 600 has that extra loop and more customisation for the pedals.
Have a look at the live stream I did yesterday if you want. Over 2hrs of answering questions
ruclips.net/video/x4b-vcPcrts/видео.html
@@JohnPaulMusicUK as a lone musician I was intrigued by the 505 but as a guitarist I can’t get around the free hands aspect to control . Thanks for coming back to me . Appreciated
Does it work as an audio interface for your daw if needed ?
yes it does and it has more than one audio interface mode as well!
Hi John, many thanks for your fine videos! A quick question - does the rc 600 have a metronome function?
Sort of, the click is found in the rhythm section.
Many thanks John for your reply, most helpful!
It’s a real hit JP! My admiration. By the way do you prefer RC over HR?
Yeah I do.
Lots of customisation and sound quality is off the charts!
I remember you saying it's adaptable to battery power. So, I bought it. But I don't remember where you said it, and I don't see anything specifically for it. How would you do this?
So you would need a power bank and the right connector giving off the correct voltage - there are a few companies like ripcord and my volts who sell a cable to connect an RC-600 to a USB battery pack.
Alternatively, a pedalboard power supply. Some of them are battery powered. 👍🏻
@@JohnPaulMusicUK Thx so much man! I will def look into those here soon. There's one other thing that's stumping me. How do I get the loop to record immediately when I press it at the end of playing the loop? It keeps lagging and screwing up my timing. It's probably trying to sync me up with the red light hits, but I don't want that. Quantize is off. Start mode is immediate. Stop mode is loop (but that's for when i want the loop to stop playing, not for the recording to stop recording) IDK what else to change?
Edit: I think I figured out the cause. I have a finger picking progression already recorded. Trying to save that for later. But I guess it makes any additional recordings sync up with it? I don't have the problem if I delete that recording. But I need that for later...
Would Neural DSP plugins work as an input from a laptop?
Yes. But I suppose you would have to output them from the USB in/out and use the RC600 as the audio interface. 👌
How good are the effects? as good as the 200/500 series? could you get away with leaving your pedalboard at home?
Yes. Maybe… there are some awesome effect s for both your inputs and the track effects as well.
There are some really nice tone effects taken from some of Boss’ pedals.
Effects video coming…
bruh great intro.
thanks for these tutorials....this unit is bonkers
Haha. Welcome 🙏
Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
I also have a FULL RC-600 course with over 55 unique deep dive videos in, which you can now pay for monthly! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/boss-rc-600-course-page
And if you want 121 consultation, I do this as well:
www.johnpaulmusic.co.uk/coaching-options
Great song. Would love to know how it compares to the LB
I talk about the comparisons in the live stream I did yesterday which is here : ruclips.net/video/x4b-vcPcrts/видео.html
But I will be doing a video.
Hi JohnPaul, thank you so much for your videos, it was a huge help for my looper selection, and I ended up getting it ! should arrive Tuesday, I can't wait ! However I have a little question about the input fx, is it possible to have fx assigned per input ? for exemple a combination of fx for the mic input, another combination for the guitar, and another for a synth ? If so how ? Thank you in advance ! Keep the good content coming !
Hi! Oh that’s great news.
So for the Boss RC-600 you can have a total of 16 input FX and 16 Track FX but can only use 4 of each at any one time.
It’s 4 banks of 4 FX so you could build effects for each instrument/ input and then cycle through the banks as you use each one. 👍🏻
Hope that helps and check this out for more - ruclips.net/user/shortshZL5lRmdzkY?feature=share
Is there a way to send line level signal (or even instrument level signal) out the headphone jack (so u can use it as a 7th stereo output running to another speaker) ?
Yes you can send out to the headphone Jack separately
@@JohnPaulMusicUK right but can it send out anything louder than "headphone-level" audio signal when U do it? (cuz, unless the speaker has an "Aux-Level" input) u can't plug a headphone level cable into a regular instrument-level or line-level input +have it be audible through a speaker..) Might be cool if they update it to send out line-level or instrument-level signal like the other outputs. but it would be even cooler if they could just add a dimmer switch for those OBNOXIOUS lights..
My question: if I play live with other musician trough rc600, can we use the 4 effects in 4 different inputs SIMULTANEOUSLY?
Yes you can. You can route the effect to one or many inputs and all can be switched on at different times or together. 👍🏻
Awesome video, thank you! If I want to undo on a specific track, how do you select the track without overdubbing/playing or stopping the track?
If you have just recorded something then the dedicated undo/redo button with activate on the last track you did something on.. but.. you can hold the Rec/Play button of that track for undo and redo. That’s the default but you can also change this. 👍🏻
I have the most updated firmware. My inputs one both have stopped working!!! This after saving many songs in memory! My only option is a factory reboot???
Have you muted them anywhere?
Check the inputs/ outputs pages on Memory.
You can always move the loops off via a computer if beforehand before you have to commit to a factory reboot.
Thanks for thereat video !!! (I figured out how to change the colors of the 9 foot switch lights, but ah...) Do u know if it's possible to change the color of the OUTER circle of "the orb?" I don't want to remove the outer orb, I just want to remove the blue color.. (Bright BLUE [or white] led lights are not just annoying.. they're bad for sleep cycles /endocrine system / +the eyes.)
sort of.. not the colour but you can change what it does which would change the colours..
go to MENU> SETUP and you can change the Loop Indicator and the Orb Indicator as well.
But you cant customise the colours.
@@JohnPaulMusicUK yep that's what I already did actually. (The red+green flashing thing is maybe a bit better but still obnoxious, so I just REMOVED the outer orb instead) a band-aid fix for a problem that hopefully they will correct in a future update by adding a dimmer to the lights.. or at least an option for fewer white +blue-based lights.. If U talk to Boss please tell them that we really don't want to have to wear sunglasses while operating this thing..
I have 2 keyboards, mic, and a drum Pàd. Can they all be hooked up and then the loop station to a mixer?
Yes. You have 4 jacks and 2 xlr’s
So you could mic up on the XLR, and then have the option of how you want to use the second XLR input and the 4 Mono jack (2 stereo) inputs. You could have the 2 keyboards in stereo and then the drum pad through the XLR (mic 2) or you could have one of the keyboards and drum pad in mono whilst the other keyboard is in stereo.
Up to you. 👍🏻
@@JohnPaulMusicUK thank you
More than welcome 🙏
Howdy! (Question #2 for a future video) Can MONO inputs be programmed to play out just ONE side of a designated "stero-link" output? OR would they HAVE to come out in "dual-mono"? (Yes as u demonstrated, I am aware that u can set the outputs to mono, +do it that way, but that's not what I want to do cuz i need to use the stereo output for another stereo input), Question is can a designated "stereo-link" output, still play Mono signals (coming from a mono input OR from a track loop) on only ONE side of the stereo output?? My hat's off to u if u can figure this one out lol thanks!
Hi. So a mono output with a stereo input. What you would have to do it pan the stereo input all the way to one side (so you don’t loose the right and left parts of the audio) and then you can feed in the stereo track, pan it in the RC600 and then send it out mono.
No problem. 👍🏻
@@JohnPaulMusicUK Cool! (that's nice, I can use that sometimes) but that was not what I was asking. I want to know if a mono INPUT can be routed out only 1 side of a stereo output. [example, running XLR inputs in mono, +sending that mono INPUT to a stereo output. Can I still use the stereo effects to pan that mono input to one side? or does it lump the stereo outputs together and force you to use mono INPUTS in "dual-mono"? (I read in the manual somewhere that certain "stereo" effects.. like panning or panning-delay can only be used with "stereo link" enabled, but it did not say if the "stereo link" had to be applied at the input as well as the output, and also did not specify if a TRACK (recorded from a mono input) can still split up the mono signal (+use panning or panning delay) when sending that mono-input'd TRACK, to stereo outputs.. (sorry if this was long lol)
great work john!! very jealous he he.
i owned the RC 300, so looking forward to the upgrade.
looking forward to your live feed!!
1/ is it possible to record "one shots" on the fly? (not having to pre-record and then enter menu system and tweak button function etc like rc 300)
2/ would love you to demo a verse /chorus /bridge type song - (track one is generic percussion, while other tracks switch between sections) was curious how quick this can be setup before audience loses attention (assuming its a simple chord structure for all parts)
3/ is it possible to select a kick drum only when using the inbuilt drum machine? or are they mostly combined patterns (snare / hi-hat combo/kick etc..) i like using the kick as my tempo and they build up sounds around this.
regards
john paul mcbride
Hey 👋
1) you can do a bit of both worlds here. So you could pre-set a loop to be a one shot before a gig and save that to a memory without a recording on it. This saves time and just use one of the memories when you know you are going to do it. Other than that, it’s still changing it in the system.
2) Again, I would setup one of the 99 memories to be a verse/chorus/bridge system with other loops as the rhythm. My ideal would be tracks 1,2,3 as rhythm and 4,5,6 as verse/chorus/bridge.
3) yes. All rhythms have pattern parts and with the brand new rhythm maker on pc and Mac, you can even create parts for the verse chorus Bridge with intros and fills etc. very cool.
How can chenge from Genre to the other Rhythm in RC600 ?
You can do this with an assign. Assigning a button to change from one to the other. Either one of the buttons on the RC-600 or an external.
Thanks for all your videos. Maybe you can help. I’m trying to use track 1 as verse and track 2 as chorus in series mode. Track 3 I want to use as percussion that will go over both verse and chorus. For some reason it always gets out of sync. I’m sure I have a wrong setting on track 3 but I can’t figure out what it is. Any ideas.
Yes. It will be down to how you put each loop down. If you have track three set as multi and the other two set and single, that’s fine but you need to go into LOOP>REC and turn quantise on. That should be it, if not it’ll be down to loop sync. Let me know.
@@JohnPaulMusicUK thanks so much for the response. I’ll try it and let you know.
@@JohnPaulMusicUK thanks again. It ended up being loop sync on one of the tracks. One more question. Is there an easy way to assign a pedal to fade out everything?
How fast is the clearing of the loops? On the rc 300 it was kinda slow. I hope is faster on the rc 600
Much - there is an option you can set for All start/stop to just hold down and clear all loops. Alternatively, the old trick of memory up and down without saving will clear them quick too. That works on the RC300 too btw and I just used to do that. 😂
with the default settings, when i use the half speed switch on a track, it sounds choppy. it sounds like it’s doubling the duration of the track but trying to maintain the same pitch (badly). i just want it to double the duration of the track and lower the pitch an octave (i.e. just play the loop at half the speed), like several other loopers do. are there specific settings i need to change to achieve this?
Yes. Go into LOOP> select the track with that loop on (you’ll have to do this with all 6 tracks if all 6 have audio on) find TEMPO SYNC>MODE and change from the default of XFADE to PITCH.
That should do it. 👍🏻 the Press LOOP there and you’ll be on Track 2 and do the same etc.
Don’t forget to save to the memory 😊
@@JohnPaulMusicUK thanks!
Hello, is it possible to do an effect only on mic 1 input and no effect on mic 2 input?
Yes. You can route them to any input. 👍🏼
Hey JP, nice recording and initial demo of this beast! It is very impressive. When I think of workflow with this looper, with so many tracks and tools, I would like to use it in many ways, and I would especially want to be able to transfer the work I put in on this device to a DAW, in my case Ableton Live. In my opinion Boss has decided to stick with a very old and limiting means of transferring files, one by one, each in a separate folder. File naming & transfer is limiting, time consuming and requires paper and pencil tracking even on my Two-track RC 500. Porting over six tracks for each song I happen to create just seems like too much. All of this leads me to be more inclined to simply go to the DAW from the start, for anything over two tracks, skipping the benefits of a hardware looper with more features than the RC 500. I guess I am not so excited by multi track live looping as to be willing to put up with the daunting file transfer process that the RC 600 would require. If Boss had added a file bundling process that would essentially transfer a single zip file of whatever was recorded, with multiple tracks and even perhaps sequences, I would be far more tempted to readjust my workflow to accommodate this otherwise amazing machine. I think the Aeros looper has done more of this, but that looper has limits regarding how well it plays with other midi devices, and I like my Morningstar MC8. All in all, I am a little more inclined to stick with the RC 500 for a while on my live performance board. My simple question is, have you considered this concern? Perhaps your live performance workflow doesn’t need to transfer into the studio, and you re-create everything directly in the studio without needing to transfer many tracks. Anyway, I would be interested in your thoughts.
Have you considered runnin the output directly into an audio interface ? I’d like to know you thoughts on that . Thanks cheers brother!
Hey Adam. Good to hear from you.
Yeah it’s something that it’s difficult I suppose but I haven’t yet considered that. Have only just updated the firmware and haven’t played around with the file transfer.
It is different cause there are 6 loops, fx, rhythm, 27 button settings, 16 midi assigns and more to contend with for 99 memories.
Defiantly reach out to boss and formulate an email about this cause it’s something that will get more and more needed as time goes on.
Hey Dast so there are 2 main options with audio interface. One is ‘generic’ where you get the output of mains of the unit.
The other is ‘vendor’ which will interest a lot of people as it turns the unit into an 8-in, 8-out interface.
Something I am looking into. If I’m going to live stream, I would just use it as Generic but Vendor is going to be very useful for multi-track performance capture. 👍🏼
How would you compare this to the Headrush looper
A few people have asked me that and they are different beasts. I still use and have my HRLB and will be doing a video on this.
@@JohnPaulMusicUK Hi John would RC600 be better than nectar pacer foot pedal and loopy pro ?
Hi Paul, first I want to thank for your clear explaining of the rc 600. ist a big help!
But there is still a important question for me, maby you can help me with that.
so:
I record on a track with the "replace the 2." mode, because I need to play till I find its in groove. so far so good... now, when I recorded it, I listen to the track and want to add a second line on the same track. but here I also want only record the last round. but now it is deleting the first line - but I want to keep it of course ... hope you understand my problem. do you have a solution?
Tank you !!
best regartds, Chris
Hey Chris 👋
The simplest way is to utilise another track. So have replace the 2 on track 1 and then use another track with the normal overdub.
Alternatively, you can use an assign to assign ‘Dub Mode’ as a target to a pedal to change it for the track you want. 👍🏻
Hope that helps? 👍🏻
@@JohnPaulMusicUK Hi Paul, I think the idea to assign a button from replace to overdub is a good way for now ..thank you very much! But somehow it would be cool to have new mode that records in replace mode and when I recode the second time ( also replace ) on the track it simply keeps the one I recorded before .. Maby its an inspiration for the next update! How ever thank you again for your support!
best, Chris
That’s a good shout. Maybe send feedback to boss. All good 👍🏻
@@JohnPaulMusicUK i will!, and I am looking forward to your next video!
THX!!
Well, Here is the playlist to all the RC-600 videos I have made so far - ruclips.net/p/PLO36LpORUSaa9-oX7LbZ4CRRUHMiWoU0s
I also have a FULL RC-600 course with over 50 unique deep dive videos in, which you won’t see on RUclips, which you can now pay for monthly for! Put SUBSCRIBER in the checkout for a discount - www.johnpaulmusic.co.uk/offers/Bw8uzFw2/checkout
I cant get my rc600 to record the sounds coming from my usb from mainstage . I have downloaded the drivers , set to vendor and usb loop in. I just cant get it to work . Its annoying me now. .Any help would be appreciated
just got mine today, thanks for the help. You might have said it earlier in the video but at 15:42 you have track two running as a quicker loop than track one. How did you make that happen. I counted to four on track one and then went to track two, counted to two and hit "rec/play", thinking that it would just loop that one faster but it didn't do that. Any tips?
Edit: I think I figured it out haha
They are all in free mode but with quantise switched on.
Hope that helps. 👍🏻
@@JohnPaulMusicUK only thing that’s annoying is that I try to hit track two to line up with track one…then it acts like I didn’t and I have to wait a whole measure to try again, do you know what I mean?
Try and learn to hit it a quarter beat before bar one beat 1… so if you were to could 1&2&3&4& on a 4/4 bar.. I would look at tapping the button anywhere after 4&.
Quantise will take care of the rest.
Hope that makes sense.
A bit of a disconnect when the button says loop but the screen says memory.
Yeah.. I get that. It says memory all over the RC-500. Muscle memory gets you used to it thou. 👍🏻
Hi John, thanks for doing these videos! Im planning to buy this awesome machine for my live performances. Please can you tell me if i can use it as an audio interface? How many channels would I have if I use it in this way? Theres a difference of using vendor mode or generic? Im a huge fan of Roland’s products but I found that there’s a lack of information in the manual about usb modes and applications. So i think you’re the only hope to discover that! Thanks!
Hey Rafael.. you are in for a treat!
So ‘generic’ mode will send out a stereo feed of the looper. Simple 2 channel Left and Right mix - same mix as the mains. So if you want to live stream.. or just record the output of the looper, that’s what’s generic is for.
However, Vendore mode UNLEASHES the looper into an 8in / 8out Audio interface! And however you had the looper routed is mimicked on the usb.
Great for multi track recording and getting everything down.
And yes it’s 32-bit! Woohoo!!
@@JohnPaulMusicUK John! Thank you so much!! Very helpful!
More than welcome 🙏
Thank for the long awaited vid JP. My question (1 of 2 cos I'm greedy!) Does undo reach back more than the last dub? IE - with a loop recorded and dubbed twice, will 2 undo's remove both overdubs? AND Q.2: After a loop is recorded featuring say a vocal and a guitar on one phrase - does the individual routing out still work on the playback? IE channel one = vocal and channel 2 = guitar. Thank you!
Hey 👋
1) undo is normal undo however there is a brand new feature called Mark Back which lets you dictate a point in time, then add more overdubs and then you can go back to that marker and multiple undos can take place.
2) yes the individual routing still applies - so if you record a vocal and guitar on the same loop, you can route the inputs and outputs to different places but I would recommend to do that in a mono state so you can split them. Stereo goes to one output. Hope that makes sense.
@@JohnPaulMusicUK Thanks JP - looking forward to more videos!
Welcome.
Here is last nights live stream that was over 2hrs long answering questions.
Enjoy!! ruclips.net/video/x4b-vcPcrts/видео.html
Thanks for the great video. I am a live looper and use a rc 300. I use my guitar and korg triton keyboard with a lot of different sounds when I loop so some songs take over a minute and a half to get started which is a little long to me so I was about to buy another rc 300 and sinc them so I can have one looper with preset sounds for my keyboard and digital percussion and then another with my guitar so I can split the signal. I want to make sure with the rc 600 can I input preset sounds and have them come out of a separate channel while I can still loop on top of it with my keyboard and keep my guitar signal separate and still loop with it as well? Hope I worded this right lol. Thanks and looking forward to the next video
Hey Justin. Ahhh i had a triton! Love those sounds. 👍🏼
So yeah you can route out to the main out, sub out 1 & 2 independently if you wish (hope that’s what you mean)
@@JohnPaulMusicUK ok great yes that sounds like what I’m looking for!
@@JohnPaulMusicUK thank you for your time!
More than welcome 🙏
This is just fantastic. Cheers.
Awesome - thanks 🙏
Hi JP. I have the RC505 and would like to connect with the RC600 via MIDI to expand the possibilities in a more complex set. My question is if I can manage to "start/stop all" in both the slave and the master from one device. Thank you.
Hi Paul.
Short answer - yes you can. When you connect the two of them together, the start/stop can be controlled with Midi Start/Stop. 👍🏻
Have a look at this - rolandus.zendesk.com/hc/en-us/articles/115002389103-RC-505-HOW-TO-ACTIVATE-MIDI-START-STOP
@@JohnPaulMusicUK Great! Thank you very much for the fast answer!! :)
More than welcome 🙏